View previous topic :: View next topic |
Author |
Message |
eurabilis n00b
Joined: 22 Jun 2010 Posts: 66 Location: Warwick, Rhode island, USA
|
Posted: Fri Jan 11, 2013 12:57 am Post subject: Failed to emerge sys-devel/gcc-4.6.3 |
|
|
If one of you could help me understand how to fix this I would appreciate it. If you need any other information on my system just ask. Thanks.
I googled this but all the results talk about a bug but it was years ago so this must be something different.
Comparing stages 2 and 3
warning: gcc/cc1-checksum.o differs
warning: gcc/cc1plus-checksum.o differs
Bootstrap comparison failure!
gcc/varasm.o differs
make[2]: *** [compare] Error 1
make[2]: Leaving directory `/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory `/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
make: *** [bootstrap-lean] Error 2
emake failed
* ERROR: sys-devel/gcc-4.6.3 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4047: Called toolchain_src_compile
* environment, line 4707: Called gcc_do_make
* environment, line 2358: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
*
* Please include /home/tmp/portage/sys-devel/gcc-4.6.3/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/home/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
* The ebuild environment file is located at '/home/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
* Working directory: '/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* S: '/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
>>> Failed to emerge sys-devel/gcc-4.6.3, Log file:
>>> '/home/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'
* Messages for package dev-libs/ppl-0.11.2-r1:
* After an upgrade of PPL it is important that you rebuild
* dev-libs/cloog-ppl.
*
* If you use gcc-config to switch to an older compiler version than
* the one PPL was built with, PPL must be rebuilt with that version.
*
* In both cases failure to do this will get you this error when
* graphite flags are used:
*
* sorry, unimplemented: Graphite loop optimizations cannot be used
*
* Messages for package sys-libs/glibc-2.15-r3:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.6.3:
*
* LTO support is still experimental and unstable.
* Any bugs resulting from the use of LTO will not be fixed.
*
* ERROR: sys-devel/gcc-4.6.3 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4047: Called toolchain_src_compile
* environment, line 4707: Called gcc_do_make
* environment, line 2358: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
*
* Please include /home/tmp/portage/sys-devel/gcc-4.6.3/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/home/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
* The ebuild environment file is located at '/home/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
* Working directory: '/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* S: '/home/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* Regenerating GNU info directory index...
* Processed 109 info files.
gentoo mike # |
|
Back to top |
|
|
fturco Veteran
Joined: 08 Dec 2010 Posts: 1181 Location: Italy
|
Posted: Fri Jan 11, 2013 2:07 pm Post subject: |
|
|
Please post the output of:
This time using BBCode tags, if possible. |
|
Back to top |
|
|
kite14 Apprentice
Joined: 07 Nov 2006 Posts: 216 Location: Italy
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|