xhci_hcd for pci-e help please [solved]

[cwc]

How do I enable Kernel driver in use: xhci_hcd ?

# dmesg | grep -i xhci
yeild nothing

I posted a previous post in reference to the USB PCI-e controller
03:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)

But I have been able to use it using the sysresccd usb but not on my OS.
uname -a
Linux ciclo 4.4.39-gentoo #3 SMP Thu Mar 2 20:59:52 PST 2017 x86_64 AMD FX(tm)-4350 Quad-Core Processor AuthenticAMD GNU/Linux

lspci -v from my OS
03:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10) (prog-if 30 [XHCI])
Subsystem: Fresco Logic FL1100 USB 3.0 Host Controller
Flags: fast devsel, IRQ 25, NUMA node 0
Memory at fe100000 (64-bit, non-prefetchable) [size=64K]
Memory at fe111000 (64-bit, non-prefetchable) [size=4K]
Memory at fe110000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable- Count=8 Masked-
Capabilities: [100] Advanced Error Reporting


On my machine using the sysresccd
03:00.0 USB controller: Fresco Logic Device 1100 (rev 10) (prog-if 30 [XHCI])
Subsystem: Fresco Logic Device 1100
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at fe100000 (64-bit, non-prefetchable) [size=64K]
Memory at fe111000 (64-bit, non-prefetchable) [size=4K]
Memory at fe110000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable+ Count=8 Masked-
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: xhci_hcd

I did get ther kenel .conf from systemrccd
https://pastebin.com/6U8zEj7A

from sysresccd

[cyberhoffman]

[cwc]

[roarinelk]

[cwc]