Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
graphite2 "Undefined symbols for architecture ppc"
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
DIZ
n00b
n00b


Joined: 04 Mar 2012
Posts: 15
Location: Beirut

PostPosted: Fri Jan 04, 2013 9:05 pm    Post subject: graphite2 "Undefined symbols for architecture ppc" Reply with quote

I recently "renewed" a friend's old Quicksilver G4 power PC, and forced an install of system 10.5.8 on it. I started installing from scratch a Gentoo Prefix, and built up to GD and ImageMagick (and their requirements) since I use them in graphics programming.

I'm running "~arch" (testing mode) and things have been working fine with all of the testing packages so far....I updated system and then world for some changes in use flags, and noticed that graphite2 was installing as new. This is listed as a stable package for the powerpc (http://packages.gentoo.org/package/media-gfx/graphite2), yet it chokes at the very end of the install. Any insight is appreciated.

The problem seems to come here (info log follows):

Quote:
Undefined symbols for architecture ppc:
"saveFP", referenced from:
graphite2::Segment::justify(graphite2::Slot*, graphite2::Font const*, float, graphite2::justFlags, graphite2::Slot*, graphite2::Slot*)in Justifier.cpp.o
graphite2::Pass::dumpRuleEventOutput(graphite2::FiniteStateMachine const&, graphite2::Rule const&, graphite2::Slot*) constin Pass.cpp.o
graphite2::Segment::append(graphite2::Segment const&)in Segment.cpp.o
graphite2::Slot::finalise(graphite2::Segment const*, graphite2::Font const*, graphite2::Position&, graphite2::Rect&, unsigned char, float&)in Slot.cpp.o
"restFP", referenced from:
graphite2::Segment::justify(graphite2::Slot*, graphite2::Font const*, float, graphite2::justFlags, graphite2::Slot*, graphite2::Slot*)in Justifier.cpp.o
graphite2::Pass::dumpRuleEventOutput(graphite2::FiniteStateMachine const&, graphite2::Rule const&, graphite2::Slot*) constin Pass.cpp.o
graphite2::Segment::append(graphite2::Segment const&)in Segment.cpp.o
graphite2::Slot::finalise(graphite2::Segment const*, graphite2::Font const*, graphite2::Position&, graphite2::Rect&, unsigned char, float&)in Slot.cpp.o
"___floatundisf", referenced from:
graphite2::SegCache::purge(graphite2::SegCacheStore*)in SegCache.cpp.o
"___fixunssfdi", referenced from:
graphite2::SegCache::purge(graphite2::SegCacheStore*)in SegCache.cpp.o
ld: symbol(s) not found for architecture ppc
collect2: ld returned 1 exit status
make[2]: *** [src/libgraphite2.3.0.1.dylib] Error 1
make[2]: Leaving directory `/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/work/graphite2-1.2.0_build'
make[1]: *** [src/CMakeFiles/graphite2.dir/all] Error 2
make[1]: Leaving directory `/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/work/graphite2-1.2.0_build'
make: *** [all] Error 2
* ERROR: media-gfx/graphite2-1.2.0 failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=media-gfx/graphite2-1.2.0'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/graphite2-1.2.0'`.
* The complete build log is located at '/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/temp/build.log'.
* The ebuild environment file is located at '/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/temp/environment'.
* Working directory: '/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/work/graphite2-1.2.0_build'
* S: '/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/work/graphite2-1.2.0'

>>> Failed to emerge media-gfx/graphite2-1.2.0, Log file:

>>> '/Volumes/SNARK/gentoo/var/tmp/portage/media-gfx/graphite2-1.2.0/temp/build.log'

* Messages for package media-gfx/graphite2-1.2.0:

* ERROR: media-gfx/graphite2-1.2.0 failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=media-gfx/graphite2-1.2.0'`,





emerge --info =media-gfx/graphite2-1.2.0
Quote:
Portage 2.2.01.21476-prefix (prefix/darwin/macos/10.5/ppc, gcc-4.2.1, unavailable, 9.8.0 Power Macintosh)
=================================================================
System Settings
=================================================================
System uname: Darwin-9.8.0-Power_Macintosh-powerpc-32bit
Timestamp of tree: Fri, 04 Jan 2013 13:37:46 +0000
distcc 2.18.5-Apple.1 i386-apple-darwin9.0 (protocols 1 and 2) (default port 3632) [disabled]
app-shells/bash: 4.2_p39-r1::gentoo_prefix
dev-lang/python: 2.7.3-r2::gentoo_prefix, 3.3.0::gentoo_prefix
dev-util/cmake: 2.8.9::gentoo_prefix
dev-util/pkgconfig: 0.27.1::gentoo_prefix
sys-devel/autoconf: 2.69::gentoo_prefix
sys-devel/automake: 1.12.4::gentoo_prefix
sys-devel/gcc-config: 1.8-r00.1::gentoo_prefix
sys-devel/libtool: 2.4.2::gentoo_prefix
sys-devel/make: 3.82-r4::gentoo_prefix
Repositories: gentoo_prefix
ACCEPT_KEYWORDS="~ppc-macos"
ACCEPT_LICENSE="* -@EULA"
CBUILD="powerpc-apple-darwin9"
CFLAGS=" -O2 -pipe-mcpu=G4 -mtune=G4"
CHOST="powerpc-apple-darwin9"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS=" -O2 -pipe-mcpu=G4 -mtune=G4"
DISTDIR="/Volumes/SNARK/gentoo/usr/portage/distfiles"
FCFLAGS=""
FEATURES="assume-digests binpkg-logs collision-protect config-protect-if-modified distlocks ebuild-locks fixlafiles force-prefix merge-sync news nostrip parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-dead_strip_dylibs"
MAKEOPTS=""
PKGDIR="/Volumes/SNARK/gentoo/usr/portage/packages"
PORTAGE_CONFIGROOT="/Volumes/SNARK/gentoo/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/Volumes/SNARK/gentoo/var/tmp"
PORTDIR="/Volumes/SNARK/gentoo/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.prefix.freens.org/gentoo-portage-prefix"
USE="X animgif apng aqua bzip2 coreaudio corefonts cracklib cxx djvu fftw fontconfig gif graphviz hdri ipv6 jbig jpeg jpeg2k lcms lzma modules ncurses nls objc objc++ openmp pango perl png postscript ppc-macos prefix q32 q64 q8 raw readline ssh ssl svg tiff truetype unicode webp wmf xml xpm zlib" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="Darwin" GPSD_PROTOCOLS="ashtech aivdm
earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse" KERNEL="Darwin" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" PHP_TARGETS="php5-3" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3 python3_2" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Sat Jan 05, 2013 6:48 am    Post subject: Reply with quote

You would be better asking this in the Alternative Architecture forum, this forum is for Gentoo Linux on PowerPC. Sorry!
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum