Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Gnome 3 Fallback Mode
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
silhard
n00b
n00b


Joined: 01 Nov 2012
Posts: 6

PostPosted: Mon Nov 19, 2012 11:26 am    Post subject: Gnome 3 Fallback Mode Reply with quote

Hi all
I installed gentoo on a virtualbox guest and some problems with the gnome 3: from time to time it starts in standard experience but most of the time i only get the fallback mode and i dont know why.

in the X0rg.0.log file i get a AIGLX error:
Code:

[    27.496]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[    27.496] X Protocol Version 11, Revision 0
[    27.496] Build Operating System: Linux 3.3.8-gentoo i686 Gentoo
[    27.496] Current Operating System: Linux pilatus 3.3.8-gentoo #7 SMP Wed Nov 14 22:54:30 CET 2012 i686
[    27.496] Kernel command line: root=/dev/sda3 video=uvesafb:mtrr:3,ywrap,1024x768-24@60
[    27.496] Build Date: 14 November 2012  02:06:50PM
[    27.496] 
[    27.496] Current version of pixman: 0.26.0
[    27.496]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    27.496] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.496] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 19 12:11:28 2012
[    27.578] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.617] (==) No Layout section.  Using the first Screen section.
[    27.617] (==) No screen section available. Using defaults.
[    27.617] (**) |-->Screen "Default Screen Section" (0)
[    27.617] (**) |   |-->Monitor "<default monitor>"
[    27.642] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    27.642] (==) Automatically adding devices
[    27.642] (==) Automatically enabling devices
[    27.687] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    27.687]    Entry deleted from font path.
[    27.687] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    27.687]    Entry deleted from font path.
[    27.687] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    27.687]    Entry deleted from font path.
[    27.703] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/100dpi/,
   /usr/share/fonts/75dpi/
[    27.703] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.703] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.703] (II) Loader magic: 0x81f5580
[    27.703] (II) Module ABI versions:
[    27.703]    X.Org ANSI C Emulation: 0.4
[    27.703]    X.Org Video Driver: 12.0
[    27.703]    X.Org XInput driver : 16.0
[    27.703]    X.Org Server Extension : 6.0
[    27.705] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
[    27.705] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    27.705] (II) LoadModule: "extmod"
[    27.824] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    27.841] (II) Module extmod: vendor="X.Org Foundation"
[    27.841]    compiled for 1.12.2, module version = 1.0.0
[    27.842]    Module class: X.Org Server Extension
[    27.842]    ABI class: X.Org Server Extension, version 6.0
[    27.842] (II) Loading extension MIT-SCREEN-SAVER
[    27.842] (II) Loading extension XFree86-VidModeExtension
[    27.842] (II) Loading extension XFree86-DGA
[    27.842] (II) Loading extension DPMS
[    27.842] (II) Loading extension XVideo
[    27.842] (II) Loading extension XVideo-MotionCompensation
[    27.842] (II) Loading extension X-Resource
[    27.842] (II) LoadModule: "dbe"
[    27.842] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    27.850] (II) Module dbe: vendor="X.Org Foundation"
[    27.850]    compiled for 1.12.2, module version = 1.0.0
[    27.850]    Module class: X.Org Server Extension
[    27.850]    ABI class: X.Org Server Extension, version 6.0
[    27.850] (II) Loading extension DOUBLE-BUFFER
[    27.850] (II) LoadModule: "glx"
[    27.851] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.932] (II) Module glx: vendor="X.Org Foundation"
[    27.932]    compiled for 1.12.2, module version = 1.0.0
[    27.932]    ABI class: X.Org Server Extension, version 6.0
[    27.932] (==) AIGLX enabled
[    27.932] (II) Loading extension GLX
[    27.932] (II) LoadModule: "record"
[    27.932] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    27.944] (II) Module record: vendor="X.Org Foundation"
[    27.944]    compiled for 1.12.2, module version = 1.13.0
[    27.944]    Module class: X.Org Server Extension
[    27.944]    ABI class: X.Org Server Extension, version 6.0
[    27.944] (II) Loading extension RECORD
[    27.944] (II) LoadModule: "dri"
[    27.944] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    27.996] (II) Module dri: vendor="X.Org Foundation"
[    28.009]    compiled for 1.12.2, module version = 1.0.0
[    28.009]    ABI class: X.Org Server Extension, version 6.0
[    28.009] (II) Loading extension XFree86-DRI
[    28.009] (II) LoadModule: "dri2"
[    28.009] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.033] (II) Module dri2: vendor="X.Org Foundation"
[    28.033]    compiled for 1.12.2, module version = 1.2.0
[    28.033]    ABI class: X.Org Server Extension, version 6.0
[    28.033] (II) Loading extension DRI2
[    28.033] (==) Matched vboxvideo as autoconfigured driver 0
[    28.033] (==) Matched vesa as autoconfigured driver 1
[    28.033] (==) Matched fbdev as autoconfigured driver 2
[    28.033] (==) Assigned the driver to the xf86ConfigLayout
[    28.033] (II) LoadModule: "vboxvideo"
[    28.033] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[    28.052] (II) Module vboxvideo: vendor="Oracle Corporation"
[    28.052]    compiled for 10.12.0, module version = 1.0.1
[    28.052]    Module class: X.Org Video Driver
[    28.052]    ABI class: X.Org Video Driver, version 12.0
[    28.052] (**) Load address of symbol "VBOXVIDEO" is 0xb727d240
[    28.052] (II) LoadModule: "vesa"
[    28.053] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.070] (II) Module vesa: vendor="X.Org Foundation"
[    28.070]    compiled for 1.12.2, module version = 2.3.1
[    28.071]    Module class: X.Org Video Driver
[    28.071]    ABI class: X.Org Video Driver, version 12.0
[    28.071] (II) LoadModule: "fbdev"
[    28.071] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.081] (II) Module fbdev: vendor="X.Org Foundation"
[    28.081]    compiled for 1.12.2, module version = 0.4.2
[    28.081]    ABI class: X.Org Video Driver, version 12.0
[    28.081] (II) VBoxVideo: guest driver for VirtualBox: vbox
[    28.081] (II) VESA: driver for VESA chipsets: vesa
[    28.081] (II) FBDEV: driver for framebuffer: fbdev
[    28.081] (++) using VT number 7

[    28.091] (WW) Falling back to old probe method for vesa
[    28.091] (WW) Falling back to old probe method for fbdev
[    28.091] (II) Loading sub module "fbdevhw"
[    28.091] (II) LoadModule: "fbdevhw"
[    28.091] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.116] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.116]    compiled for 1.12.2, module version = 0.0.2
[    28.116]    ABI class: X.Org Video Driver, version 12.0
[    28.117] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.4_OSE
[    28.117] (II) Loading sub module "ramdac"
[    28.117] (II) LoadModule: "ramdac"
[    28.117] (II) Module "ramdac" already built-in
[    28.117] (II) Loading sub module "fb"
[    28.117] (II) LoadModule: "fb"
[    28.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.128] (II) Module fb: vendor="X.Org Foundation"
[    28.128]    compiled for 1.12.2, module version = 1.0.0
[    28.128]    ABI class: X.Org ANSI C Emulation, version 0.4
[    28.128] (II) Loading sub module "shadowfb"
[    28.128] (II) LoadModule: "shadowfb"
[    28.128] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    28.129] (II) Module shadowfb: vendor="X.Org Foundation"
[    28.129]    compiled for 1.12.2, module version = 1.0.0
[    28.129]    ABI class: X.Org ANSI C Emulation, version 0.4
[    28.129] (II) Loading sub module "vgahw"
[    28.129] (II) LoadModule: "vgahw"
[    28.171] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    28.191] (II) Module vgahw: vendor="X.Org Foundation"
[    28.191]    compiled for 1.12.2, module version = 0.1.0
[    28.191]    ABI class: X.Org Video Driver, version 12.0
[    28.191] (II) Loading sub module "dri"
[    28.191] (II) LoadModule: "dri"
[    28.191] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.191] (II) Module dri: vendor="X.Org Foundation"
[    28.191]    compiled for 1.12.2, module version = 1.0.0
[    28.191]    ABI class: X.Org Server Extension, version 6.0
[    28.192] (II) VBoxVideo(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    28.192] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[    28.193] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 (54.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 (54.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 (54.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    28.193] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[    28.193] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[    28.193] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    28.193] (==) VBoxVideo(0): RGB weight 888
[    28.193] (==) VBoxVideo(0): Default visual is TrueColor
[    28.193] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[    28.193] (==) VBoxVideo(0): DPI set to (96, 96)
[    28.193] (II) UnloadModule: "vesa"
[    28.193] (II) Unloading vesa
[    28.193] (II) UnloadModule: "fbdev"
[    28.193] (II) Unloading fbdev
[    28.193] (II) UnloadSubModule: "fbdevhw"
[    28.193] (II) Unloading fbdevhw
[    28.193] (--) Depth 24 pixmap format is 32 bpp
[    28.250] drmOpenDevice: node name is /dev/dri/card0
[    28.971] drmOpenDevice: node name is /dev/dri/card0
[    29.754] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    29.754] drmOpenDevice: node name is /dev/dri/card0
[    29.754] drmOpenDevice: open result is 9, (OK)
[    29.754] drmOpenByBusid: drmOpenMinor returns 9
[    29.754] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    29.754] (II) [drm] loaded kernel module for "vboxvideo" driver.
[    29.754] (II) [drm] DRM interface version 1.4
[    29.754] (II) [drm] DRM open master succeeded.
[    29.754] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[    29.754] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[    29.754] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[    29.754] (II) VBoxVideo(0): X context handle = 0x1
[    29.754] (II) VBoxVideo(0): [drm] installed DRM signal handler
[    29.754] (II) VBoxVideo(0): visual configurations initialized
[    29.769] (II) VBoxVideo(0): Requested monitor count: 1
[    29.769] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[    29.769] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[    29.770] (II) VBoxVideo(0): EDID for output VBOX0
[    29.770] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 58983840
[    29.770] (II) VBoxVideo(0): Year: 1990  Week: 1
[    29.770] (II) VBoxVideo(0): EDID Version: 1.3
[    29.770] (II) VBoxVideo(0): Digital Display Input
[    29.770] (II) VBoxVideo(0): Indeterminate output size
[    29.770] (II) VBoxVideo(0): Gamma: 2.20
[    29.770] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[    29.770] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    29.770] (II) VBoxVideo(0): Default color space is primary color space
[    29.770] (II) VBoxVideo(0): First detailed timing is preferred mode
[    29.770] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    29.770] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    29.770] (II) VBoxVideo(0): Manufacturer's mask: 0
[    29.770] (II) VBoxVideo(0): Supported detailed timing:
[    29.770] (II) VBoxVideo(0): clock: 78.6 MHz   Image Size:  0 x 0 mm
[    29.770] (II) VBoxVideo(0): h_active: 1440  h_sync: 1442  h_sync_end 1444 h_blank_end 1446 h_border: 0
[    29.770] (II) VBoxVideo(0): v_active: 900  v_sync: 902  v_sync_end 904 v_blanking: 906 v_border: 0
[    29.770] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[    29.770] (II) VBoxVideo(0): Monitor name: VBOX monitor
[    29.770] (II) VBoxVideo(0): EDID (in hex):
[    29.771] (II) VBoxVideo(0):    00ffffffffffff0058580000a0058403
[    29.771] (II) VBoxVideo(0):    0100010380000078eeee91a3544c9926
[    29.771] (II) VBoxVideo(0):    0f505400000001010101010101010101
[    29.771] (II) VBoxVideo(0):    010101010101b41ea006508406300202
[    29.771] (II) VBoxVideo(0):    2200000000000000000000fd0000c800
[    29.771] (II) VBoxVideo(0):    c864000a202020202020000000fc0056
[    29.771] (II) VBoxVideo(0):    424f58206d6f6e69746f720a00000010
[    29.771] (II) VBoxVideo(0):    000a2020202020202020202020200091
[    29.771] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    29.771] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    29.771] (II) VBoxVideo(0): Using hsync ranges from config file
[    29.771] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    29.771] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    29.771] (II) VBoxVideo(0): Modeline "1440x900"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 -hsync -vsync (54.4 kHz eP)
[    29.771] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[    29.771] (II) VBoxVideo(0): Modeline "1440x900"x60.0   78.60  1440 1442 1444 1446  900 902 904 906 (54.4 kHz Pb)
[    29.771] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    29.771] (II) VBoxVideo(0): Modeline "1440x1050"x60.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[    29.771] (II) VBoxVideo(0): Modeline "1280x960"x60.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[    29.771] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[    29.771] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    29.771] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[    29.771] (II) VBoxVideo(0): Output VBOX0 connected
[    29.771] (II) VBoxVideo(0): Using exact sizes for initial modes
[    29.771] (II) VBoxVideo(0): Output VBOX0 using initial mode 1440x900
[    29.771] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    29.783] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.784] (==) VBoxVideo(0): DPMS enabled
[    29.784] (II) VBoxVideo(0): [DRI] installation complete
[    29.784] (--) RandR disabled
[    29.784] (II) Initializing built-in extension Generic Event Extension
[    29.784] (II) Initializing built-in extension SHAPE
[    29.784] (II) Initializing built-in extension MIT-SHM
[    29.784] (II) Initializing built-in extension XInputExtension
[    29.784] (II) Initializing built-in extension XTEST
[    29.784] (II) Initializing built-in extension BIG-REQUESTS
[    29.784] (II) Initializing built-in extension SYNC
[    29.784] (II) Initializing built-in extension XKEYBOARD
[    29.784] (II) Initializing built-in extension XC-MISC
[    29.784] (II) Initializing built-in extension XINERAMA
[    29.784] (II) Initializing built-in extension XFIXES
[    29.784] (II) Initializing built-in extension RENDER
[    29.784] (II) Initializing built-in extension RANDR
[    29.784] (II) Initializing built-in extension COMPOSITE
[    29.784] (II) Initializing built-in extension DAMAGE
[    29.795] (II) AIGLX: Screen 0 is not DRI2 capable
[    29.795] drmOpenDevice: node name is /dev/dri/card0
[    29.795] drmOpenDevice: open result is 10, (OK)
[    29.795] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    29.795] drmOpenDevice: node name is /dev/dri/card0
[    29.795] drmOpenDevice: open result is 10, (OK)
[    29.795] drmOpenByBusid: drmOpenMinor returns 10
[    29.795] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    29.795] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    29.969] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[    29.969] (II) The file referenced, is *NOT* loaded
[    29.969] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[    29.969] (EE) AIGLX error: vboxvideo does not export required DRI extension
[    29.969] (EE) AIGLX: reverting to software rendering
[    30.423] (II) AIGLX: Loaded and initialized swrast
[    30.423] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    30.424] (II) VBoxVideo(0): Setting screen physical size to 380 x 238
[    30.499] [dix] Could not init font path element /usr/share/fonts/100dpi/, removing from list!
[    30.507] [dix] Could not init font path element /usr/share/fonts/75dpi/, removing from list!
[    31.009] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.009] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.009] (II) LoadModule: "evdev"
[    31.009] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.053] (II) Module evdev: vendor="X.Org Foundation"
[    31.053]    compiled for 1.12.2, module version = 2.7.0
[    31.053]    Module class: X.Org XInput Driver
[    31.053]    ABI class: X.Org XInput driver, version 16.0
[    31.053] (II) Using input driver 'evdev' for 'Power Button'
[    31.053] (**) Power Button: always reports core events
[    31.054] (**) evdev: Power Button: Device: "/dev/input/event2"
[    31.054] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.054] (--) evdev: Power Button: Found keys
[    31.054] (II) evdev: Power Button: Configuring as keyboard
[    31.054] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    31.054] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.054] (**) Option "xkb_rules" "evdev"
[    31.054] (**) Option "xkb_model" "evdev"
[    31.054] (**) Option "xkb_layout" "us"
[    31.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    31.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.089] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.089] (**) Sleep Button: always reports core events
[    31.089] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    31.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.089] (--) evdev: Sleep Button: Found keys
[    31.089] (II) evdev: Sleep Button: Configuring as keyboard
[    31.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3/event3"
[    31.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    31.089] (**) Option "xkb_rules" "evdev"
[    31.089] (**) Option "xkb_model" "evdev"
[    31.089] (**) Option "xkb_layout" "us"
[    31.090] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4)
[    31.090] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[    31.090] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[    31.090] (**) VirtualBox mouse integration: always reports core events
[    31.090] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event4"
[    31.090] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[    31.090] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[    31.090] (--) evdev: VirtualBox mouse integration: Found absolute axes
[    31.090] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[    31.090] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[    31.090] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[    31.090] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[    31.090] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input4/event4"
[    31.090] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[    31.090] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[    31.090] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[    31.090] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[    31.090] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    31.090] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    31.090] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js0)
[    31.090] (II) No input driver specified, ignoring this device.
[    31.090] (II) This device may have been added with another device file.
[    31.091] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event6)
[    31.091] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[    31.091] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[    31.091] (**) VirtualBox USB Tablet: always reports core events
[    31.091] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event6"
[    31.091] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[    31.091] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[    31.091] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[    31.091] (--) evdev: VirtualBox USB Tablet: Found relative axes
[    31.091] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[    31.091] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[    31.091] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[    31.091] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[    31.091] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[    31.091] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[    31.091] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input6/event6"
[    31.091] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[    31.091] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[    31.091] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[    31.091] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[    31.091] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[    31.091] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    31.091] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    31.091] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js1)
[    31.091] (II) No input driver specified, ignoring this device.
[    31.091] (II) This device may have been added with another device file.
[    31.092] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[    31.092] (II) No input driver specified, ignoring this device.
[    31.092] (II) This device may have been added with another device file.
[    31.092] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    31.092] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.092] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.092] (**) AT Translated Set 2 keyboard: always reports core events
[    31.092] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    31.092] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.092] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.092] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.092] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    31.092] (**) Option "xkb_rules" "evdev"
[    31.092] (**) Option "xkb_model" "evdev"
[    31.092] (**) Option "xkb_layout" "us"
[    31.093] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    31.093] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[    31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[    31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[    31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[    31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[    31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[    31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[    31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[    31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[    31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.093] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[    31.093] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[    31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    31.093] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[    31.093] (II) No input driver specified, ignoring this device.
[    31.093] (II) This device may have been added with another device file.
[    31.094] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    31.094] (II) No input driver specified, ignoring this device.
[    31.094] (II) This device may have been added with another device file.
[    31.142] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    31.142] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    31.142] (II) VBoxVideo(0): Using hsync ranges from config file
[    31.142] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    31.142] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    31.142] (II) VBoxVideo(0): Modeline "1440x900"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 -hsync -vsync (54.4 kHz eP)
[    42.840] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    42.840] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    42.840] (II) VBoxVideo(0): Using hsync ranges from config file
[    42.840] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    42.840] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    42.840] (II) VBoxVideo(0): Modeline "1440x900"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 -hsync -vsync (54.4 kHz eP)
[    56.596] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    56.596] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    56.596] (II) VBoxVideo(0): Using hsync ranges from config file
[    56.596] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    56.596] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    56.596] (II) VBoxVideo(0): Modeline "1440x900"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 -hsync -vsync (54.4 kHz eP)
[    61.532] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    61.532] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    61.532] (II) VBoxVideo(0): Using hsync ranges from config file
[    61.532] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    61.532] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    61.532] (II) VBoxVideo(0): Modeline "1440x900"x0.0   78.60  1440 1442 1444 1446  900 902 904 906 -hsync -vsync (54.4 kHz eP)


the xinitrc:
Code:

export XDG_MENU_PREFIX=gnome-
exec ck-launch-session  gnome-session


$ glxinfo | grep rendering
--> gives me back direct rendering: yes

i already tried to reinstall the guest additions 4.2.4 several times as well as the drivers:
x11-drivers/xf86-input-evdev
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-input-synaptics
x11-drivers/xf86-video-fbdev
x11-drivers/xf86-video-vesa
x11-drivers/xf86-video-virtualbox

host is a macbook pro late 2011 and its completley arbitrary when gnome 3 starts in fallback or standard. i also have the aiglx error once the standard experience works.
any idea?
Back to top
View user's profile Send private message
silhard
n00b
n00b


Joined: 01 Nov 2012
Posts: 6

PostPosted: Thu Nov 22, 2012 8:25 am    Post subject: Reply with quote

I do not get any answers. Is this because there is information missing or does no one have a solution?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum