View previous topic :: View next topic |
Author |
Message |
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Tue Dec 04, 2012 2:43 pm Post subject: chroot in 32bit System funktioniert nicht mehr [solved] |
|
|
Hallo Forum,
ich habe auf einem Server mit 64bit System ein Verzeichnis mit einer 32bit Installation.
Darin ist ein fertiges System das ich für eine Boot-CD erstellt habe.
Mit "linux32 chroot /mnt/gentoo32 /bin/bash" bin ich da immer rein gewechselt und habe notwendige Änderungen erledigt.
Leider funktioniert der chroot seit einiger Zeit nicht mehr und es ist mir nicht mehr möglich Änderungen an diesem System vorzunehmen.
Bei meiner Suche nach dem Problem bin ich auf diese offizielle Anleitung gestoßen wo es auch genau so beschrieben ist.
Da die Anleitung aber aus dem Jahr 2008 ist und ich am 17.01.2012 noch eingeloggt war denke ich das es was mit den Updates dieses Jahr zu tun hat.
Ich schätze das die Mounts nicht mehr stimmen da sich hier etwas geändert hat dieses Jahr.
Weiß jemand was hier das Problem sein könnte?
Leider bekomme ich auch keine Fehlermeldungen sondern der Promt lässt einfach auf sich warten und ich muss mit Ctrl + C abbrechen.
Last edited by nanos on Wed Dec 05, 2012 9:37 am; edited 1 time in total |
|
Back to top |
|
|
Randy Andy Veteran
Joined: 19 Jun 2007 Posts: 1148 Location: /dev/koelsch
|
Posted: Tue Dec 04, 2012 5:07 pm Post subject: |
|
|
Hi nanos.
Zeig uns doch mal nach dem gescheitertem chroot deine Ausgabe von mount.
Mir geistert da noch was durch den Hinterkopf mit einem update von openrc, das es erforderlich machte im kernel nun folgende Optionen zu setzten:
Code: |
Search Results ────────────────────────────────────────────────────────────────────────┐ │
│ │ │ │
│ │ Symbol: DEVTMPFS [=y] │ │
│ │ Type : boolean │ │
│ │ Prompt: Maintain a devtmpfs filesystem to mount at /dev │ │
│ │ Defined at drivers/base/Kconfig:24 │ │
│ │ Depends on: HOTPLUG [=y] │ │
│ │ Location: │ │
│ │ -> Device Drivers │ │
│ │ -> Generic Driver Options │ │
│ │ │ │
│ │ │ │
│ │ Symbol: DEVTMPFS_MOUNT [=y] │ │
│ │ Type : boolean │ │
│ │ Prompt: Automount devtmpfs at /dev, after the kernel mounted the rootfs │ │
│ │ Defined at drivers/base/Kconfig:44 │ │
│ │ Depends on: DEVTMPFS [=y] │ │
│ │ Location: │ │
│ │ -> Device Drivers │ │
│ │ -> Generic Driver Options │ │
│ │ -> Maintain a devtmpfs filesystem to mount at /dev (DEVTMPFS [=y]) │ │
│ │
|
Vermute was in dieser Richtung, vorausgesetzt du hast sonst alle Vorbedingungen vor dem chroot eingehalten, so wie in deiner verlinkten Doku, nach der es bei mir immer noch funktioniert.
Andy. _________________ If you want to see a Distro done right, compile it yourself! |
|
Back to top |
|
|
toralf Developer
Joined: 01 Feb 2004 Posts: 3921 Location: Hamburg
|
Posted: Tue Dec 04, 2012 6:29 pm Post subject: |
|
|
Code: | enable CONFIG_DEVTMPFS_MOUNT | ist Bestandteil des channel topics vom IRC #gentoo |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Wed Dec 05, 2012 7:34 am Post subject: |
|
|
Ich habe das gleich mal ausprobiert, den kernel neu gebaut und neu gestartet.
Leider funktioniert es noch immer nicht.
Hier die Ausgabe von mount:
Code: |
rootfs on / type rootfs (rw)
/dev/root on / type ext4 (rw,noatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=3024916k,nr_inodes=756229,mode=755)
proc on /proc type proc (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
cgroup_root on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755)
openrc on /sys/fs/cgroup/openrc type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/lib64/rc/sh/cgroup-release-agent.sh,name=openrc)
cpuset on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cpu on /sys/fs/cgroup/cpu type cgroup (rw,nosuid,nodev,noexec,relatime,cpu)
cpuacct on /sys/fs/cgroup/cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct)
freezer on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot type ext2 (rw,noatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
/dev on /mnt/gentoo32/dev type none (rw,bind)
/dev/pts on /mnt/gentoo32/dev/pts type none (rw,bind)
/dev/shm on /mnt/gentoo32/dev/shm type none (rw,bind)
/proc on /mnt/gentoo32/proc type none (rw,bind)
/sys on /mnt/gentoo32/sys type none (rw,bind)
|
|
|
Back to top |
|
|
bell Guru
Joined: 27 Nov 2007 Posts: 508
|
Posted: Wed Dec 05, 2012 7:43 am Post subject: |
|
|
Quote: | /dev/pts on /mnt/gentoo32/dev/pts type none (rw,bind)
/proc on /mnt/gentoo32/proc type none (rw,bind)
/sys on /mnt/gentoo32/sys type none (rw,bind) | Normalerweise mounted man diese Verzeichnisse nicht als "bind" sondern normal neu. Also
Code: | mount -t proc none /mnt/gentoo32/proc
mount -t sysfs none /mnt/gentoo32/sys
mount -t devpts none /mnt/gentoo32/dev/pts | Vielleicht hilft das. |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Wed Dec 05, 2012 7:57 am Post subject: |
|
|
Ich habe deinen Rat befolgt aber leider noch immer das selbe Ergebnis:
Code: | none on /mnt/gentoo32/proc type proc (rw)
none on /mnt/gentoo32/sys type sysfs (rw)
/dev on /mnt/gentoo32/dev type none (rw,bind)
none on /mnt/gentoo32/dev/pts type devpts (rw)
/dev/shm on /mnt/gentoo32/dev/shm type none (rw,bind)
|
|
|
Back to top |
|
|
mv Watchman
Joined: 20 Apr 2005 Posts: 6747
|
Posted: Wed Dec 05, 2012 8:11 am Post subject: |
|
|
bell wrote: | Normalerweise mounted man diese Verzeichnisse nicht als "bind" sondern normal neu. |
Ich würde bei "bind" bleiben. Zumindest bzgl. devpts (oder war es /dev?) habe ich mit Neu-Mounten schlechte Erfahrungen gemacht, aber ich habe vergessen welche Probleme aufgetreten sind; das Problem hatte irgendwie damit zu tun, dass Änderungen (bei neuen Terminals, oder war es ein udev-Device? Ich hatte damals mit beidem experimentiert) nicht "richtig" durchgereicht wurden. |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Wed Dec 05, 2012 8:51 am Post subject: |
|
|
Ich habe jetzt mal ein neues System mit folgenden Schritten angelegt:
Code: | mkdir /mnt/gentoo32
cd /mnt/gentoo32
wget http://de-mirror.org/gentoo/releases/x86/current-stage3/stage3-i686-20121016.tar.bz2
tar -xvjpf ./stage3-i686-20121016.tar.bz2
cp -L /etc/resolv.conf /mnt/gentoo32/etc/
|
Mit diesen Mounts:
Code: | mount --bind /dev /mnt/gentoo32/dev
mount --bind /dev/pts /mnt/gentoo32/dev/pts
mount --bind /dev/shm /mnt/gentoo32/dev/shm
mount -t proc none /mnt/gentoo32/proc
mount -t sysfs none /mnt/gentoo32/sys
|
und diesem Chroot:
Code: | linux32 chroot /mnt/gentoo32 /bin/bash --login |
Kann das mal jemand mit einem aktuellem 64bit System nachmachen? |
|
Back to top |
|
|
Finswimmer Bodhisattva
Joined: 02 Sep 2004 Posts: 5467 Location: Langen (Hessen), Germany
|
Posted: Wed Dec 05, 2012 9:18 am Post subject: |
|
|
Ich habe das 1:1 übernommen und raus kommt:
uname -a
Linux laptop 3.5.3 #7 SMP Thu Nov 8 18:34:02 CET 2012 i686 Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz GenuineIntel GNU/Linux
Normales System:
Linux laptop 3.5.3 #7 SMP Thu Nov 8 18:34:02 CET 2012 x86_64 Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz GenuineIntel GNU/Linux _________________ Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Wed Dec 05, 2012 9:29 am Post subject: |
|
|
Danke fürs ausprobieren, Du verwendest nicht zufällig die Z-Shell?
Das ist nämlich der einzige Punkt dem ich diesen Fehler noch zutrauen würde.
Ansonsten ist es eine ganz normale Installation. |
|
Back to top |
|
|
bell Guru
Joined: 27 Nov 2007 Posts: 508
|
Posted: Wed Dec 05, 2012 9:36 am Post subject: |
|
|
Ist bei Dir vielleicht IA32_EMULATION aus dem Kernel rausgefallen? Ohne diese Option kann der Kernel keine 32-Bit Anwendungen ausführen. |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Wed Dec 05, 2012 9:37 am Post subject: chroot in 32bit System funktioniert nicht mehr [solved] |
|
|
Es ist tatsächlich die zsh, nachdem ich auf die Bash zurück gewechselt bin klappt auch der chroot wieder.
Ich werde mal sehen ob ich da noch genauere Infos dazu bekomme und gegeben falls einen Bug-Report erstellen.
Vielen Dank für Eure Hilfe. |
|
Back to top |
|
|
Randy Andy Veteran
Joined: 19 Jun 2007 Posts: 1148 Location: /dev/koelsch
|
Posted: Wed Dec 05, 2012 4:55 pm Post subject: |
|
|
Ahh, danke für die Rückmeldung.
Nun weiß ich auch wieder warum ich, trotz all der Annehmlichkeiten, der Z-shell entsagt habe
Gruß, Andy. _________________ If you want to see a Distro done right, compile it yourself! |
|
Back to top |
|
|
toralf Developer
Joined: 01 Feb 2004 Posts: 3921 Location: Hamburg
|
Posted: Wed Dec 05, 2012 5:09 pm Post subject: |
|
|
nanos wrote: | Danke fürs ausprobieren, Du verwendest nicht zufällig die Z-Shell? | Wieso hat die (z-) Shell damit was zu tun ? Ist die so buggy ? |
|
Back to top |
|
|
mv Watchman
Joined: 20 Apr 2005 Posts: 6747
|
Posted: Wed Dec 05, 2012 7:21 pm Post subject: |
|
|
toralf wrote: | Wieso hat die (z-) Shell damit was zu tun? |
Das kann ich auch nicht nachvollziehen: Die wird bei "/bin/bash" im letzten Teil der chroot ja gar nicht gestartet.
Es könnte höchstens sein, dass Du in einem Bash-Initscript eine für Dien chroot wichtige Environment-Variable gesetzt hast, im zsh-Initscript aber nicht: Vergleiche doch einmal die Ausgaben eines umgeleiteten "env"-Befehls. |
|
Back to top |
|
|
nanos Tux's lil' helper
Joined: 22 Jun 2006 Posts: 78
|
Posted: Mon Dec 10, 2012 9:16 am Post subject: |
|
|
Ich konnte keine nennenswerte Unterschiede der Ausgaben von env feststellen.
Hier mal ein diff der beiden Ausgaben von env:
Code: | diff bash.env zsh.env
3a4,5
> HISTFILE=/root/.history
> HISTSIZE=2000
10d11
< LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;usw. usw.
12a14
> OLDPWD=/root
17c19,20
< SHELL=/bin/bash
---
> SAVEHIST=2000
> SHELL=/bin/zsh
19,20c22,23
< SSH_CLIENT=192.168.44.225 49759 22
< SSH_CONNECTION=192.168.44.225 49759 192.168.44.20 22
---
> SSH_CLIENT=192.168.44.225 50009 22
> SSH_CONNECTION=192.168.44.225 50009 192.168.44.20 22
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|