View previous topic :: View next topic |
Author |
Message |
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Wed Jul 18, 2012 6:56 pm Post subject: [Kernel] Dedibox DC - Config Kernel [Résolu] |
|
|
Bonjour,
Alors voila, je voulais réinstaller mon serveur (Dedibox DC) la semaine dernière (ça fait quelques années que j'utilise Gentoo même si je suis loin d'être un expert ^_^')
J'utilise le dernier ISO amd64, le dernier stage3 et le dernier portage. (2012-06-21)
Cependant, impossible de booter, et vu que c'est à distance je vois rien :/
Je fais comme d'habitude pourtant (tuto Gentoo), et je fais tout pareil sur un PC à la maison (C2D, 2go, DD Sata), et la tout fonctionne.
Est ce qu'il n'y aurait pas des réglages spécifiques à faire dans le kernel pour la dedibox DC ? Vu que c'est un I3, pour du rootsfs qui déconnerait dans mtab, pour le DD en sata ou autres ?
A noter que je fais make menuconfig puis exit, je laisse tout par default, puis je fais make sans all.
J'en suis à plus de 15 installations depuis dimanche soir et je commence à saturer, je vous appelle donc à l'aide ! D'habitude en cherchant je trouve des infos mais là, j'ai rien trouvé ^^
Merci d'avance pour votre aide
PS: Je n'ai volontairement pas posté d'infos de config etc... pour le moment, je pense que tout est OK vu que ça marche à la maison, j'aimerais juste savoir si quelqu'un avec une Dedibox DC a des informations pour le kernel. Et sinon je posterais la totalité des infos mais ça va faire un gros paté avec 15 tests
EDIT : Ajout des informations de config plus bas dans le post
Last edited by Mythy on Fri Jul 20, 2012 4:37 pm; edited 4 times in total |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Wed Jul 18, 2012 6:57 pm Post subject: Re: [Kernel?] Dedibox DC - Pas de boot ?? |
|
|
PS2 : J'utilise gentoo-sources-3.3.8
PS3 : Si vous n'avez pas de Dedibox DC et que vous avez une idée, je suis aussi preneur
@FailEditing |
|
Back to top |
|
|
El_Goretto Moderator
Joined: 29 May 2004 Posts: 3171 Location: Paris
|
Posted: Wed Jul 18, 2012 9:54 pm Post subject: |
|
|
En 2 temps, tu pourrais faire un test de ton système dans un environnement virtualisé, voir si tu n'as rien oublié (en dehors des drivers spécifiques).
Ensuite, si c'est bon, tu vérifies la correspondance entre le matos vu par le liveCD et ce que tu as inclus dans le noyau.
Je ne vois que çà, à défaut de se faire fournir un .config par quelqu'un qui en a aussi une _________________ -TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Wed Jul 18, 2012 10:02 pm Post subject: |
|
|
Merci pour ta réponse et ces informations
Par contre je n'ai aucune idée de la façon dont je dois procéder pour effectuer les actions que tu as cité :/
J'ai l'habitude de suivre les différents tutos en bidouillant un peu, mais je ne connais pas tout des bases de Gentoo :/
Je vais chercher pour voir si je trouve comment faire ça mais si tu as une idée de comment procéder, je serais preneur
Edit:
A noter que je boot sur un rescue CD Ubuntu 10.04 LTS amd64, j'ai utilisé le même boot CD à la maison et ça marche bien avec. De plus la première fois ça avait déjà marché sur cet Dedibox DC, mais ça date de juillet 2011.
Je posterais plus d'informations demain matin. Ça peut toujours aider en faite |
|
Back to top |
|
|
boozo Advocate
Joined: 01 Jul 2004 Posts: 3193
|
|
Back to top |
|
|
nox23 n00b
Joined: 15 Jul 2012 Posts: 36
|
Posted: Thu Jul 19, 2012 8:23 am Post subject: |
|
|
Salut,
installes-tu le noyau dans /boot ?
je te conseille d'utiliser genkernel qui est très utile
d'autant plus que tu utilises la config noyau du livecd -> si tu fais une compil du kernel manuel avec le .config du livecd c'est normal que ca ne marche pas
fais une compil manuelle si tu maîtrises, sinon utilise genkernel
++ |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 8:26 am Post subject: |
|
|
nox23 wrote: | Salut,
installes-tu le noyau dans /boot ?
je te conseille d'utiliser genkernel qui est très utile
d'autant plus que tu utilises la config noyau du livecd -> si tu fais une compil du kernel manuel avec le .config du livecd c'est normal que ca ne marche pas
fais une compil manuelle si tu maîtrises, sinon utilise genkernel
++ |
Hello,
Oui je l'installe, et j'utilisais genkernel avant mes nouveaux tests, mais ça ne fonctionne pas non plus avec (j'ai toujours utilisé genkernel mais vu que ça marche pas je commence à chercher avec make et une config "perso"). Je n'utilise pas le .config du Live CD, il y en a pas dessus ^^ |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 8:36 am Post subject: |
|
|
boozo wrote: |
Mythy wrote: | (...)
A noter que je fais make menuconfig puis exit, je laisse tout par default, puis je fais make sans all.
(...) |
Navré mais que veux-tu dire exactement par-là ?
|
Je voulais dire que j'avais crée le kernel avec make mais en laissant tout par default
Mais je reviens vers vous avec plus d'informations !
A PARTIR DU LIVE CD UBUNTU :
Code: | myth@sd-00000:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation 3400 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
03:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a) |
Code: | myth@sd-00000:~$ lsmod
Module Size Used by
dm_crypt 22872 0
kvm_intel 60505 0
kvm 370460 1 kvm_intel
joydev 17597 0
ghes 13601 0
dcdbas 14438 0
power_meter 18139 0
hed 13226 1 ghes
raid10 30611 0
raid456 62146 0
async_pq 12987 1 raid456
async_xor 12879 2 raid456,async_pq
xor 12845 1 async_xor
async_memcpy 12529 1 raid456
async_raid6_recov 12776 1 raid456
raid6_pq 88307 2 async_pq,async_raid6_recov
async_tx 13349 5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
raid1 30596 0
raid0 17207 0
multipath 13141 0
linear 12966 0
aufs 180627 189
squashfs 36602 1
usbhid 46708 0
hid 94906 1 usbhid
mpt2sas 142967 1
ahci 26002 0
scsi_transport_sas 40441 1 mpt2sas
bnx2 85286 0
libahci 30664 1 ahci
raid_class 13554 1 mpt2sas |
A PARTIR DU CHROOT GENTOO :
Code: | sd-00000 / # lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation 3400 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
03:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a) |
Code: | sd-00000 / # lsmod
Module Size Used by
dm_crypt 22872 0
kvm_intel 60505 0
kvm 370460 1 kvm_intel
joydev 17597 0
ghes 13601 0
dcdbas 14438 0
power_meter 18139 0
hed 13226 1 ghes
raid10 30611 0
raid456 62146 0
async_pq 12987 1 raid456
async_xor 12879 2 raid456,async_pq
xor 12845 1 async_xor
async_memcpy 12529 1 raid456
async_raid6_recov 12776 1 raid456
raid6_pq 88307 2 async_pq,async_raid6_recov
async_tx 13349 5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
raid1 30596 0
raid0 17207 0
multipath 13141 0
linear 12966 0
aufs 180627 186
squashfs 36602 1
usbhid 46708 0
hid 94906 1 usbhid
mpt2sas 142967 3
ahci 26002 0
scsi_transport_sas 40441 1 mpt2sas
bnx2 85286 0
libahci 30664 1 ahci
raid_class 13554 1 mpt2sas |
Code: | sd-00000 / # ls /var/log/
emerge-fetch.log emerge.log portage sandbox |
(Vu le contenu du dossier, c'est comme ça que je sais que ça boot pas. Normalement y'a plus de fichiers)
Code: | sd-00000 / # ls /boot/
boot grub kernel-3.3.8-gentoo lost+found |
Code: | sd-00000 / # cat /boot/grub/grub.conf
default 0
timeout 3
title Gentoo
root (hd0,0)
kernel /boot/kernel-3.3.8-gentoo root=/dev/sda3 |
(GRUB s'installe sur /dev/sda sans problèmes)
Code: | sd-00000 / # cat /etc/fstab
/dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sda3 / ext3 noatime 0 1
/dev/sda2 none swap sw 0 0
#/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0 |
Code: | sd-00000 / # cat /etc/mtab
/dev/sda3 / ext3 rw,noatime 0 0
proc /proc proc rw 0 0
rc-svcdir /lib64/rc/init.d tmpfs rw,nosuid,nodev,noexec,relatime,size=1024k,mode=755 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
udev /dev tmpfs rw,nosuid,relatime,size=10240k,mode=755 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
shm /dev/shm tmpfs rw,noexec,nosuid,nodev 0 0
usbfs /proc/bus/usb usbfs rw,noexec,nosuid,devmode=0664,devgid=85 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 |
Code: | sd-00000 / # cat /etc/make.conf
CFLAGS="-march=core2 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
CHOST="x86_64-pc-linux-gnu"
USE="-X mmx sse sse2 -gtk -sdl"
MAKEOPTS="-j3"
GENTOO_MIRRORS="ftp://ftp.free.fr/mirrors/ftp.gentoo.org/"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" |
Code: | sd-00000 home # rc-status default
Runlevel: default
net.eth0
syslog-ng
sshd
netmount
udev-postmount
vixie-cron
local |
|
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
|
Back to top |
|
|
nox23 n00b
Joined: 15 Jul 2012 Posts: 36
|
Posted: Thu Jul 19, 2012 8:43 am Post subject: |
|
|
je t'explique :
boot sur le live-cd
ensuite zcat /proc/config.gz > /root/config_kernel
avec ce .config là tu le mets de côté
tu copies ca sur ta dedibox et fais cp /root/config_kernel /usr/src/linux/.config
fais bien attention qu'il fasse pas de make mrproper au besoin édite /etc/genkernel.conf avec ces options :
Code: |
# Run 'make oldconfig' before compiling this kernel?
OLDCONFIG="yes"
# Run 'make menuconfig' before compiling this kernel?
MENUCONFIG="yes"
# Run 'make clean' before compilation?
# If set to NO, implies MRPROPER WILL NOT be run
# Also, if clean is NO, it won't copy over any configuration
# file, it will use what's there.
CLEAN="no"
# Run 'make mrproper' before configuration/compilation?
MRPROPER="no"
# Override the arch detection?
#ARCH_OVERRIDE="x86"
# Mount BOOTDIR automatically if it isn't mounted?
MOUNTBOOT="yes"
# Make symlinks in BOOTDIR automatically?
SYMLINK="yes"
# Save the new configuration in /etc/kernels upon
# successfull compilation
SAVE_CONFIG="yes"
# Use Color output in Genkernel?
USECOLOR="yes"
|
genkernel all, puis tu quittes, tu touches pas a la config du kernel !
ls /boot
puis tu crées les bonnes entrées dans /boot/grub/menu.lst
comme ceci :
Code: |
default 0
timeout 10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Gentoo Linux 3.2.21
root (hd0,0)
kernel /boot/kernel real_root=/dev/sda3 video=vesafb:ywrap,mtrr vga=0x341
initrd /boot/initramfs
title Gentoo Linux old kernel
root (hd0,0)
kernel /boot/kernel.old
initrd /boot/initramfs.old
# vim:ft=conf: |
si ca marche toujours pas
donne la sortie de dmesg et lspci on affinera |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 8:45 am Post subject: |
|
|
Merci, je vais tester ça |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 8:52 am Post subject: |
|
|
Ça commence mal ^^
Code: | myth@sd-00000:/home$ sudo zcat /proc/config.gz > /root/config_kernel
-bash: /root/config_kernel: Permission non accordée
myth@sd-00000:/home$ sudo zcat /proc/config.gz > /home/myth/config_kernel
gzip: /proc/config.gz: No such file or directory |
|
|
Back to top |
|
|
nox23 n00b
Joined: 15 Jul 2012 Posts: 36
|
Posted: Thu Jul 19, 2012 9:20 am Post subject: |
|
|
tu es sur quel live-cd ?
celui de ubuntu ou gentoo ? au besoin tu peux le faire de chez toi
je pense que tu as pas utiliser genkernel la premiere fois, du coup la fois ou tu as utilisé genkernel il a enregistré la config que tu avais fait. |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 9:25 am Post subject: |
|
|
Je suis sur le rescue CD de dedibox. Apparemment c'est un ubuntu 10.04 LTS amd64 (lucid)
Chez moi, j'ai pas la même config matériel que le serveur dédié donc je suis pas sur que ça sert à quelque chose.
De plus chez moi, tout fonctionne, que ce soit avec genkernel ou avec make, j'ai déjà fais 15 installs cette semaine, avec différentes façons de faire, tout marche chez moi et rien marche sur le dédié ^_^' |
|
Back to top |
|
|
boozo Advocate
Joined: 01 Jul 2004 Posts: 3193
|
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 9:35 am Post subject: |
|
|
Oui je suis sur à 99.9% de tout ce que j'ai fais, et puis ça marche super bien à la maison ou j'ai 2 serv gentoo.
Et effectivement sans log c'est bien la galère, je pense qu'il faut régler correctement le kernel avec make menuconfig mais je ne sais pas quels sont les options à régler pour que ça fonctionne :/
Merci du temps que vous passez à m'aider en tout cas |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 10:02 am Post subject: |
|
|
Je rajoute les infos processeur depuis le live CD, si jamais ça peut aider.
Code: | myth@sd-00000:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
stepping : 5
cpu MHz : 3059.530
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm c onstant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6119.06
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
stepping : 5
cpu MHz : 3059.530
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm c onstant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6117.95
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
stepping : 5
cpu MHz : 3059.530
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm c onstant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6117.96
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
stepping : 5
cpu MHz : 3059.530
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 5
initial apicid : 5
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm c onstant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6117.96
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management: |
|
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 10:06 am Post subject: |
|
|
Et le emerge --info une fois dans le chroot
Code: | sd-00000 / # emerge --info
Portage 2.1.10.65 (default/linux/amd64/10.0, gcc-4.5.3, glibc-2.14.1-r3, 2.6.38-12-generic x86_64)
=================================================================
System uname: Linux-2.6.38-12-generic-x86_64-Intel-R-_Core-TM-_i3_CPU_540_@_3.07GHz-with-gentoo-2.1
Timestamp of tree: Wed, 18 Jul 2012 09:00:01 +0000
app-shells/bash: 4.2_p20
dev-lang/python: 3.2.3
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.1-r1
sys-apps/openrc: 0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.68
sys-devel/automake: 1.11.1
sys-devel/binutils: 2.21.1-r1
sys-devel/gcc: 4.5.3-r2
sys-devel/gcc-config: 1.6
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc: 2.14.1-r3
Repositories: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=core2 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles news parallel-fetch parse-eapi-ebuild-head protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="ftp://ftp.free.fr/mirrors/ftp.gentoo.org/"
LANG="fr_FR.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="acl amd64 berkdb bzip2 cli cracklib crypt cups cxx dri fortran gdbm gpm iconv ipv6 mmx modules mudflap multilib ncurses nls nptl openmp pam pcre pppd readline session sse sse2 ssl tcpd unicode xorg zlib"
ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol"
APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump"
CAMERAS="ptp2"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
ELIBC="glibc"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx"
INPUT_DEVICES="keyboard mouse evdev"
KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
PHP_TARGETS="php5-3"
PYTHON_TARGETS="python3_2 python2_7"
RUBY_TARGETS="ruby18 ruby19"
USERLAND="GNU"
VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON |
|
|
Back to top |
|
|
boozo Advocate
Joined: 01 Jul 2004 Posts: 3193
|
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 10:31 am Post subject: |
|
|
Hmm le /etc/mtab que j'ai posté était une version d'essai, copié d'un autre serveur gentoo.
Voici celui qui est vraiment présent actuellement (en chroot après un grep -v rootfs /proc/mounts > /etc/mtab) :
Code: | sd-00000 linux # cat /etc/mtab
none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
none /dev devtmpfs rw,relatime,size=1982972k,nr_inodes=495743,mode=755 0 0
none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
/dev/loop0 /live/ro.1 squashfs ro,relatime 0 0
tmpfs /rw tmpfs rw,relatime 0 0
aufs / aufs rw,relatime,si=b30ba7048dd945e1 0 0
tmpfs /live/rw tmpfs rw,relatime 0 0
none /sys/fs/fuse/connections fusectl rw,relatime 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
none /sys/kernel/security securityfs rw,relatime 0 0
none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0
none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0
none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
/dev/sda3 / ext3 rw,relatime,errors=continue,barrier=0,data=ordered 0 0
/dev/sda1 /boot ext2 rw,relatime,errors=continue 0 0
none /proc proc rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=1982972k,nr_inodes=495743,mode=755 0 0 |
|
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 10:33 am Post subject: |
|
|
Merci, je vais chercher dans ce sens là, sauf que lspci, je sais ce qu'il fait mais pas à quoi il sert :S
Et je sais même pas installer un driver sur gentoo ^_^' |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 10:39 am Post subject: |
|
|
Sympa le configurateur debian
http://www.mythy.fr/files/pri/lspci.jpg
Je n'en tire que très peu de conclusion par contre, ne comprenant pas tout... Mais apparemment le noyau supporte pas le processeur ?
Edit: je viens de recompiler un noyau, je le test et sinon je test celui de seed, je vous tiens au courant
Last edited by Mythy on Thu Feb 21, 2013 9:38 am; edited 3 times in total |
|
Back to top |
|
|
xaviermiller Bodhisattva
Joined: 23 Jul 2004 Posts: 8711 Location: ~Brussels - Belgique
|
Posted: Thu Jul 19, 2012 11:01 am Post subject: |
|
|
Le processeur est suporté et ne nécessite pas de driver _________________ Kind regards,
Xavier Miller |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 11:03 am Post subject: |
|
|
Ok merci pour cet info
Mais du coup une idée de ce qui peut ne pas aller ?
Edit: (compil du kernel-seed en cours) |
|
Back to top |
|
|
Mythy Tux's lil' helper
Joined: 17 Jul 2012 Posts: 75
|
Posted: Thu Jul 19, 2012 11:20 am Post subject: |
|
|
Ca fonctionne pas non plus avec le kernel-seed :S
Voici ce que j'ai fais en chroot :
Code: | cd /usr/src/linux/
rm .config
rm .config.old
make clean
...
nano .config |
(j'ai copié tout le contenu de cette page : http://www.kernel-seeds.org/seeds/64_bit/gentoo/3.3.8-gentoo-x86_64-08.config et sauvegardé)
Code: | make
...
make modules_install
...
cp arch/x86_64/boot/bzImage /boot/kernel-3.3.8-gentoo |
(la date correspond en source et destination)
Code: | grep -v rootfs /proc/mounts > /etc/mtab
grub-install --no-floppy /dev/sda |
Puis sortie du chroot, unmount et reboot. Mais toujours rien.
Est ce que si j'install un Ubuntu LTS 12.04 LTS-server 64bits et que je choppe ces infos :
Code: | zcat /proc/config.gz > /root/config_kernel |
Et que je les emmène sur le live CD puis le chroot, est ce que ça serait à tenter ou c'est mort d'avance ? |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|