Nvidia drivers not working after last update [solved]

[cwc]

I just did an update of world and nvidia drivers were update along with xorg.
I use starts to start gnome. I get a blank screen. I did a mod probe and an eselect OpenGL set 1 for nvidia
Looking at /var/log/Xorg.0.log does not tell me much


should the nvidia-bug-report.log.gz be a text file?

How should I set my session so I can still use starts?

Any ideas? Typing this a iPad not fun

[PaulBredbury]

First thing I would try: Downgrade the nvidia driver back to what it was before.

[cwc]

First thing I would try: Downgrade the nvidia driver back to what it was before.

hmmm. I'll look it portage to see what I had.

This is the error log:


____________________________________________

Start of NVIDIA bug report log file. Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'linux-bugs@nvidia.com'.

nvidia-bug-report.sh Version: 11669588

Date: Sat Jun 23 14:34:36 PDT 2012
uname: Linux azzerare 3.2.12-gentoo #3 SMP Fri Apr 13 05:16:30 PDT 2012 x86_64 AMD Athlon(tm) 64 Processor 3400+ AuthenticAMD GNU/Linux

____________________________________________

*** /etc/issue
*** ls: -rw-r--r-- 1 root root 30 2007-04-05 04:18:42.000000000 -0700 /etc/issue

This is \n.\O (\s \m \r) \t


____________________________________________

*** /etc/gentoo-release
*** ls: -rw-r--r-- 1 root root 31 2012-05-20 09:55:24.000000000 -0700 /etc/gentoo-release
Gentoo Base System release 2.1

____________________________________________

*** /var/log/nvidia-installer.log does not exist

____________________________________________

*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root root 16661 2012-06-23 11:14:59.000000000 -0700 /var/log/Xorg.0.log
[ 261.201]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 261.202] X Protocol Version 11, Revision 0
[ 261.203] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 261.204] Current Operating System: Linux azzerare 3.2.12-gentoo #3 SMP Fri Apr 13 05:16:30 PDT 2012 x86_64
[ 261.204] Kernel command line: root=/dev/sda3
[ 261.205] Build Date: 23 June 2012 06:35:16AM
[ 261.206]
[ 261.206] Current version of pixman: 0.26.0
[ 261.208] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 261.208] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 261.211] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 23 11:14:55 2012
[ 261.264] (==) Using config file: "/etc/X11/xorg.conf"
[ 261.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 261.317] (==) ServerLayout "X.org Configured"
[ 261.317] (**) |-->Screen "Screen0" (0)
[ 261.317] (**) | |-->Monitor "Monitor0"
[ 261.339] (**) | |-->Device "Card0"
[ 261.339] (**) |-->Input Device "Mouse0"
[ 261.339] (**) |-->Input Device "Keyboard0"
[ 261.339] (==) Automatically adding devices
[ 261.339] (==) Automatically enabling devices
[ 261.439] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 261.439] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 261.439] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 261.439] (WW) Disabling Mouse0
[ 261.439] (WW) Disabling Keyboard0
[ 261.439] (II) Loader magic: 0x7d0ae0
[ 261.439] (II) Module ABI versions:
[ 261.439] X.Org ANSI C Emulation: 0.4
[ 261.439] X.Org Video Driver: 12.0
[ 261.439] X.Org XInput driver : 16.0
[ 261.439] X.Org Server Extension : 6.0
[ 261.440] (--) PCI:*(0:2:0:0) 10de19da:6132 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000e800/128, BIOS @ 0x????????/524288
[ 261.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 261.441] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 261.441] (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
[ 261.441] (II) "extmod" will be loaded by default.
[ 261.441] (II) "dbe" will be loaded by default.
[ 261.441] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 261.441] (II) "record" will be loaded by default.
[ 261.441] (II) "dri" will be loaded even though the default is to disable it.
[ 261.441] (II) "dri2" will be loaded even though the default is to disable it.
[ 261.441] (II) LoadModule: "glx"
[ 261.457] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 262.787] (II) Module glx: vendor="NVIDIA Corporation"
[ 262.787] compiled for 4.0.2, module version = 1.0.0
[ 262.787] Module class: X.Org Server Extension
[ 262.787] (II) NVIDIA GLX Module 295.59 Wed Jun 6 21:40:44 PDT 2012
[ 262.787] (II) Loading extension GLX
[ 262.787] (II) LoadModule: "extmod"
[ 262.787] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 262.797] (II) Module extmod: vendor="X.Org Foundation"
[ 262.797] compiled for 1.12.2, module version = 1.0.0
[ 262.797] Module class: X.Org Server Extension
[ 262.797] ABI class: X.Org Server Extension, version 6.0
[ 262.797] (II) Loading extension MIT-SCREEN-SAVER
[ 262.797] (II) Loading extension XFree86-VidModeExtension
[ 262.797] (II) Loading extension XFree86-DGA
[ 262.797] (II) Loading extension DPMS
[ 262.797] (II) Loading extension XVideo
[ 262.797] (II) Loading extension XVideo-MotionCompensation
[ 262.797] (II) Loading extension X-Resource
[ 262.797] (II) LoadModule: "dbe"
[ 262.797] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 262.803] (II) Module dbe: vendor="X.Org Foundation"
[ 262.803] compiled for 1.12.2, module version = 1.0.0
[ 262.803] Module class: X.Org Server Extension
[ 262.803] ABI class: X.Org Server Extension, version 6.0
[ 262.803] (II) Loading extension DOUBLE-BUFFER
[ 262.803] (II) LoadModule: "record"
[ 262.803] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 262.811] (II) Module record: vendor="X.Org Foundation"
[ 262.811] compiled for 1.12.2, module version = 1.13.0
[ 262.811] Module class: X.Org Server Extension
[ 262.811] ABI class: X.Org Server Extension, version 6.0
[ 262.811] (II) Loading extension RECORD
[ 262.811] (II) LoadModule: "nvidia"
[ 262.819] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 263.102] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 263.102] compiled for 4.0.2, module version = 1.0.0
[ 263.102] Module class: X.Org Video Driver
[ 263.145] (II) NVIDIA dlloader X Driver 295.59 Wed Jun 6 21:21:24 PDT 2012
[ 263.145] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 263.154] (--) using VT number 7

[ 263.214] (II) Loading sub module "fb"
[ 263.214] (II) LoadModule: "fb"
[ 263.242] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 263.246] (II) Module fb: vendor="X.Org Foundation"
[ 263.246] compiled for 1.12.2, module version = 1.0.0
[ 263.246] ABI class: X.Org ANSI C Emulation, version 0.4
[ 263.246] (II) Loading sub module "wfb"
[ 263.246] (II) LoadModule: "wfb"
[ 263.246] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 263.254] (II) Module wfb: vendor="X.Org Foundation"
[ 263.254] compiled for 1.12.2, module version = 1.0.0
[ 263.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 263.254] (II) Loading sub module "ramdac"
[ 263.254] (II) LoadModule: "ramdac"
[ 263.254] (II) Module "ramdac" already built-in
[ 263.308] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 263.308] (==) NVIDIA(0): RGB weight 888
[ 263.308] (==) NVIDIA(0): Default visual is TrueColor
[ 263.308] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 263.308] (**) NVIDIA(0): Enabling 2D acceleration
[ 264.388] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH198 (DFP-0)) does not
[ 264.388] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 264.392] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT216) at PCI:2:0:0 (GPU-0)
[ 264.392] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 264.392] (--) NVIDIA(0): VideoBIOS: 70.16.61.00.00
[ 264.392] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 264.392] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 264.394] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:2:0:0
[ 264.394] (--) NVIDIA(0): Ancor Communications Inc ASUS VH198 (DFP-0)
[ 264.394] (--) NVIDIA(0): Ancor Communications Inc ASUS VH198 (DFP-0): 330.0 MHz maximum
[ 264.394] (--) NVIDIA(0): pixel clock
[ 264.394] (--) NVIDIA(0): Ancor Communications Inc ASUS VH198 (DFP-0): Internal Dual
[ 264.394] (--) NVIDIA(0): Link TMDS
[ 264.411] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 264.411] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH198 (DFP-0) (Using
[ 264.411] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 264.411] (**) NVIDIA(0): devices.)
[ 264.505] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 264.505] (==) NVIDIA(0):
[ 264.505] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 264.505] (==) NVIDIA(0): will be used as the requested mode.
[ 264.505] (==) NVIDIA(0):
[ 264.506] (II) NVIDIA(0): Validated modes:
[ 264.506] (II) NVIDIA(0): "nvidia-auto-select"
[ 264.506] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 264.533] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 264.533] (--) NVIDIA(0): option
[ 264.533] (--) Depth 24 pixmap format is 32 bpp
[ 264.533] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 264.539] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 264.539] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 264.539] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 264.539] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 264.539] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 264.539] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 264.539] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 264.539] (II) NVIDIA(0): Config Options in the README.
[ 264.541] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 264.609] (II) Loading extension NV-GLX
[ 264.712] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 264.712] (==) NVIDIA(0): Backing store disabled
[ 264.712] (==) NVIDIA(0): Silken mouse enabled
[ 264.713] (==) NVIDIA(0): DPMS enabled
[ 264.713] (II) Loading extension NV-CONTROL
[ 264.713] (II) Loading extension XINERAMA
[ 264.713] (II) Loading sub module "dri2"
[ 264.713] (II) LoadModule: "dri2"
[ 264.785] (WW) Warning, couldn't open module dri2
[ 264.785] (II) UnloadModule: "dri2"
[ 264.785] (II) Unloading dri2
[ 264.785] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[ 264.785] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[ 264.785] (II) NVIDIA(0): libvdpau.
[ 264.785] (==) RandR enabled
[ 264.785] (II) Initializing built-in extension Generic Event Extension
[ 264.785] (II) Initializing built-in extension SHAPE
[ 264.785] (II) Initializing built-in extension MIT-SHM
[ 264.785] (II) Initializing built-in extension XInputExtension
[ 264.785] (II) Initializing built-in extension XTEST
[ 264.785] (II) Initializing built-in extension BIG-REQUESTS
[ 264.785] (II) Initializing built-in extension SYNC
[ 264.785] (II) Initializing built-in extension XKEYBOARD
[ 264.785] (II) Initializing built-in extension XC-MISC
[ 264.785] (II) Initializing built-in extension XINERAMA
[ 264.785] (II) Initializing built-in extension XFIXES
[ 264.785] (II) Initializing built-in extension RENDER
[ 264.785] (II) Initializing built-in extension RANDR
[ 264.785] (II) Initializing built-in extension COMPOSITE
[ 264.785] (II) Initializing built-in extension DAMAGE
[ 264.785] (II) Initializing extension GLX
[ 265.585] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 265.585] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 265.585] (II) LoadModule: "evdev"
[ 265.585] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 265.637] (II) Module evdev: vendor="X.Org Foundation"
[ 265.637] compiled for 1.12.2, module version = 2.7.0
[ 265.637] Module class: X.Org XInput Driver
[ 265.637] ABI class: X.Org XInput driver, version 16.0
[ 265.637] (II) Using input driver 'evdev' for 'Power Button'
[ 265.637] (**) Power Button: always reports core events
[ 265.637] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 265.637] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 265.637] (--) evdev: Power Button: Found keys
[ 265.637] (II) evdev: Power Button: Configuring as keyboard
[ 265.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 265.637] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 265.637] (**) Option "xkb_rules" "evdev"
[ 265.637] (**) Option "xkb_model" "evdev"
[ 265.637] (**) Option "xkb_layout" "us"
[ 265.672] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 265.672] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 265.672] (II) Using input driver 'evdev' for 'Power Button'
[ 265.672] (**) Power Button: always reports core events
[ 265.672] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 265.673] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 265.673] (--) evdev: Power Button: Found keys
[ 265.673] (II) evdev: Power Button: Configuring as keyboard
[ 265.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 265.673] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 265.673] (**) Option "xkb_rules" "evdev"
[ 265.673] (**) Option "xkb_model" "evdev"
[ 265.673] (**) Option "xkb_layout" "us"
[ 265.673] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 265.673] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 265.673] (II) Using input driver 'evdev' for 'Sleep Button'
[ 265.673] (**) Sleep Button: always reports core events
[ 265.673] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 265.673] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 265.673] (--) evdev: Sleep Button: Found keys
[ 265.673] (II) evdev: Sleep Button: Configuring as keyboard
[ 265.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[ 265.674] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 265.674] (**) Option "xkb_rules" "evdev"
[ 265.674] (**) Option "xkb_model" "evdev"
[ 265.674] (**) Option "xkb_layout" "us"
[ 265.674] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event4)
[ 265.674] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 265.674] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[ 265.674] (**) MosArt Optical Mouse: always reports core events
[ 265.674] (**) evdev: MosArt Optical Mouse: Device: "/dev/input/event4"
[ 265.674] (--) evdev: MosArt Optical Mouse: Vendor 0x62a Product 0x3
[ 265.674] (--) evdev: MosArt Optical Mouse: Found 3 mouse buttons
[ 265.674] (--) evdev: MosArt Optical Mouse: Found scroll wheel(s)
[ 265.674] (--) evdev: MosArt Optical Mouse: Found relative axes
[ 265.674] (--) evdev: MosArt Optical Mouse: Found x and y relative axes
[ 265.674] (II) evdev: MosArt Optical Mouse: Configuring as mouse
[ 265.674] (II) evdev: MosArt Optical Mouse: Adding scrollwheel support
[ 265.675] (**) evdev: MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 265.675] (**) evdev: MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 265.675] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4/event4"
[ 265.675] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE, id 9)
[ 265.675] (II) evdev: MosArt Optical Mouse: initialized for relative axes.
[ 265.675] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 265.675] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 265.675] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 265.675] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 265.675] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[ 265.675] (II) No input driver specified, ignoring this device.
[ 265.675] (II) This device may have been added with another device file.
[ 265.676] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 265.676] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 265.676] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 265.676] (**) AT Translated Set 2 keyboard: always reports core events
[ 265.676] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 265.676] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 265.676] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 265.676] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 265.676] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 265.676] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 265.676] (**) Option "xkb_rules" "evdev"
[ 265.676] (**) Option "xkb_model" "evdev"
[ 265.676] (**) Option "xkb_layout" "us"

____________________________________________

*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1620 2012-04-22 09:53:44.000000000 -0700 /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
# Load "dri2"
# Load "dbe"
# Load "record"
# Load "extmod"
# Load "dri"
#cwc
Disable "dri"
Disable "dri2"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection


____________________________________________

*** /usr/share/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2012-06-23 06:41:03.000000000 -0700 /usr/share/X11/xorg.conf.d/10-evdev.conf
#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

____________________________________________

*** /usr/share/X11/xorg.conf.d/50-wacom.conf
*** ls: -rw-r--r-- 1 root root 670 2012-06-23 06:43:14.000000000 -0700 /usr/share/X11/xorg.conf.d/50-wacom.conf
Section "InputClass"
Identifier "Wacom class"
MatchProduct "Wacom|WACOM|WALTOP|Hanwang|PTK-540WL"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom serial class"
MatchProduct "Serial Wacom Tablet"
Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection


# N-Trig Duosense Electromagnetic Digitizer
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection


____________________________________________

ldd /usr/bin/glxinfo

linux-vdso.so.1 => (0x00007fff981f3000)
libX11.so.6 => /usr/lib64/libX11.so.6 (0x00007f4a8dcfb000)
libGL.so.1 => /usr/lib64/libGL.so.1 (0x00007f4a8d9e3000)
libc.so.6 => /lib64/libc.so.6 (0x00007f4a8d658000)
libxcb.so.1 => /usr/lib64/libxcb.so.1 (0x00007f4a8d437000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f4a8d233000)
libnvidia-tls.so.295.59 => /usr/lib64/opengl/nvidia/lib/libnvidia-tls.so.295.59 (0x00007f4a8d030000)
libnvidia-glcore.so.295.59 => /usr/lib64/libnvidia-glcore.so.295.59 (0x00007f4a8acf6000)
libXext.so.6 => /usr/lib64/libXext.so.6 (0x00007f4a8aae4000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4a8e038000)
libXau.so.6 => /usr/lib64/libXau.so.6 (0x00007f4a8a8e0000)
libXdmcp.so.6 => /usr/lib64/libXdmcp.so.6 (0x00007f4a8a6da000)
libm.so.6 => /lib64/libm.so.6 (0x00007f4a8a458000)

____________________________________________

/usr/sbin/lspci -d "10de:*" -v -xxx

02:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device 6132
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at ce000000 (64-bit, prefetchable) [size=32M]
I/O ports at e800
[virtual] Expansion ROM at fbe80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia
00: de 10 23 0a 07 00 10 00 a2 00 00 03 00 00 80 00
10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 0c 00 00 ce
20: 00 00 00 00 01 e8 00 00 00 00 00 00 da 19 32 61
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
40: da 19 32 61 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e0 8d 00 00
80: 10 29 00 00 01 4d 05 00 08 01 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
a0: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device 6132
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at fbe7c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00: de 10 e2 0b 06 01 10 00 a1 00 03 04 10 00 80 00
10: 00 c0 e7 fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 da 19 32 61
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
40: da 19 32 61 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 a0 8d 00 00
80: 10 29 00 00 01 4d 04 00 0b 01 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


____________________________________________

/usr/sbin/lspci -t

-[0000:00]-+-00.0
+-00.1
+-00.2
+-00.3
+-00.4
+-00.5
+-00.6
+-00.7
+-01.0-[01]--
+-02.0-[02]--+-00.0
| \-00.1
+-0f.0
+-0f.1
+-10.0
+-10.1
+-10.2
+-10.3
+-10.4
+-11.0
+-11.7
+-12.0
+-13.0-[04]----01.0
+-13.1-[05]--
+-18.0
+-18.1
+-18.2
\-18.3

____________________________________________

/usr/sbin/lspci -nn

00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:1336]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:2336]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:3336]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:4336]
00:00.5 PIC [0800]: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller [1106:5336]
00:00.6 Host bridge [0600]: VIA Technologies, Inc. Device [1106:6290]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:7336]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South] [1106:b188]
00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:a238]
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller [1106:3349]
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07)
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90)
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90)
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90)
00:10.3 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90)
00:10.4 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287]
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller [1106:287e]
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 Host Bridge [1106:287b]
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCI to PCI Bridge [1106:287a]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
02:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [GeForce 210] [10de:0a23] (rev a2)
02:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1)
04:01.0 Audio device [0403]: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller [1106:3288]
____________________________________________

/usr/bin/lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 062a:0003 Creative Labs

____________________________________________

Skipping dmidecode output (dmidecode not found)

____________________________________________

/sbin/modinfo nvidia | grep vermagic

vermagic: 3.2.12-gentoo SMP mod_unload

____________________________________________

Scanning kernel log files for NVRM messages:

/var/log/messages is not readable
/var/log/kernel.log is not readable

____________________________________________

dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.12-gentoo (root@azzerare) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #3 SMP Fri Apr 13 05:16:30 PDT 2012
[ 0.000000] Command line: root=/dev/sda3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-VM, BIOS 080012 06/19/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffb0000 @ 1fffb000-20000000
[ 0.000000] ACPI: RSDP 00000000000fa850 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bffb0000 00034 (v01 A M I OEMRSDT 06000619 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 A M I OEMFACP 06000619 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffb0440 0498E (v01 A0339 A0339000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000bffbe000 00040
[ 0.000000] ACPI: APIC 00000000bffb0390 00068 (v01 A M I OEMAPIC 06000619 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 A M I OEMMCFG 06000619 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffbe040 00046 (v01 A M I AMI_OEM 06000619 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bffb0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bffb0000
[ 0.000000] NODE_DATA [00000000bffab000 - 00000000bffaffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffb0
[ 0.000000] On node 0 totalpages: 786239
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12223 pages used for memmap
[ 0.000000] DMA32 zone: 770033 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bfc00000 s75712 r8192 d22592 u1048576
[ 0.000000] pcpu-alloc: s75712 r8192 d22592 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773945
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[ 0.000000] Node 0: aperture @ f0000000 size 128 MB
[ 0.000000] Memory: 3082852k/3145408k available (5201k kernel code, 452k absent, 62104k reserved, 5685k data, 552k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2200.085 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.003363] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.17 BogoMIPS (lpj=2200085)
[ 0.004002] pid_max: default: 32768 minimum: 301
[ 0.004387] Security Framework initialized
[ 0.005004] SELinux: Initializing.
[ 0.005370] SELinux: Starting in permissive mode
[ 0.005858] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010969] Mount-cache hash table entries: 256
[ 0.011195] Initializing cgroup subsys cpuacct
[ 0.011557] Initializing cgroup subsys freezer
[ 0.012031] tseg: 0000000000
[ 0.012046] mce: CPU supports 5 MCE banks
[ 0.012434] SMP alternatives: switching to UP code
[ 0.015473] ACPI: Core revision 20110623
[ 0.018998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.029378] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 02
[ 0.029997] Performance Events: AMD PMU driver.
[ 0.029997] ... version: 0
[ 0.029997] ... bit width: 48
[ 0.029999] ... generic registers: 4
[ 0.030358] ... value mask: 0000ffffffffffff
[ 0.030719] ... max period: 00007fffffffffff
[ 0.030998] ... fixed-purpose events: 0
[ 0.031358] ... event mask: 000000000000000f
[ 0.032134] MCE: In-kernel MCE decoding enabled.
[ 0.032495] Brought up 1 CPUs
[ 0.032853] Total of 1 processors activated (4400.17 BogoMIPS).
[ 0.036858] PM: Registering ACPI NVS region at bffbe000 (139264 bytes)
[ 0.037122] RTC time: 18:16:11, date: 06/23/12
[ 0.037521] NET: Registered protocol family 16
[ 0.038082] kworker/u:0 used greatest stack depth: 6264 bytes left
[ 0.038859] node 0 link 0: io port [1000, ffffff]
[ 0.038862] TOM: 00000000c0000000 aka 3072M
[ 0.039002] node 0 link 0: mmio [a0000, bffff]
[ 0.039005] node 0 link 0: mmio [c0000000, ffffffff]
[ 0.039008] bus: [00, ff] on node 0 link 0
[ 0.039012] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.039014] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.039017] bus: 00 index 2 [mem 0xc0000000-0xfcffffffff]
[ 0.039037] ACPI: bus type pci registered
[ 0.039517] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.040022] PCI: not using MMCONFIG
[ 0.040381] PCI: Using configuration type 1 for base access
[ 0.041491] kworker/u:0 used greatest stack depth: 5952 bytes left
[ 0.042612] kworker/u:0 used greatest stack depth: 5552 bytes left
[ 0.051514] bio: create slab <bio-0> at 0
[ 0.052075] ACPI: Added _OSI(Module Device)
[ 0.052435] ACPI: Added _OSI(Processor Device)
[ 0.052794] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053021] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.054125] ACPI: EC: Look up EC in DSDT
[ 0.055053] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.058016] ACPI: Interpreter enabled
[ 0.058379] ACPI: (supports S0 S1 S4 S5)
[ 0.058998] ACPI: Using IOAPIC for interrupt routing
[ 0.059382] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.061315] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.090295] ACPI: No dock devices found.
[ 0.090660] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.091093] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.091654] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.091657] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.091661] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.091664] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.092004] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfff7ffff] (ignored)
[ 0.092030] pci 0000:00:00.0: [1106:0336] type 0 class 0x000600
[ 0.092043] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.092159] pci 0000:00:00.1: [1106:1336] type 0 class 0x000600
[ 0.092220] pci 0000:00:00.2: [1106:2336] type 0 class 0x000600
[ 0.092279] pci 0000:00:00.3: [1106:3336] type 0 class 0x000600
[ 0.092337] pci 0000:00:00.4: [1106:4336] type 0 class 0x000600
[ 0.092395] pci 0000:00:00.5: [1106:5336] type 0 class 0x000800
[ 0.092479] pci 0000:00:00.6: [1106:6290] type 0 class 0x000600
[ 0.092537] pci 0000:00:00.7: [1106:7336] type 0 class 0x000600
[ 0.092598] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[ 0.092653] pci 0000:00:01.0: supports D1
[ 0.092674] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[ 0.092768] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.092773] pci 0000:00:02.0: PME# disabled
[ 0.092824] pci 0000:00:0f.0: [1106:3349] type 0 class 0x000104
[ 0.092845] pci 0000:00:0f.0: reg 10: [io 0xd800-0xd807]
[ 0.092856] pci 0000:00:0f.0: reg 14: [io 0xd400-0xd403]
[ 0.092867] pci 0000:00:0f.0: reg 18: [io 0xd000-0xd007]
[ 0.092878] pci 0000:00:0f.0: reg 1c: [io 0xc800-0xc803]
[ 0.092889] pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f]
[ 0.092900] pci 0000:00:0f.0: reg 24: [mem 0xf9fffc00-0xf9ffffff]
[ 0.092949] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.092954] pci 0000:00:0f.0: PME# disabled
[ 0.092977] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 0.093033] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.093106] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.093156] pci 0000:00:10.0: reg 20: [io 0xc000-0xc01f]
[ 0.093200] pci 0000:00:10.0: supports D1 D2
[ 0.093202] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093207] pci 0000:00:10.0: PME# disabled
[ 0.093227] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.093276] pci 0000:00:10.1: reg 20: [io 0xb800-0xb81f]
[ 0.093321] pci 0000:00:10.1: supports D1 D2
[ 0.093323] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093328] pci 0000:00:10.1: PME# disabled
[ 0.093347] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.093397] pci 0000:00:10.2: reg 20: [io 0xb400-0xb41f]
[ 0.093441] pci 0000:00:10.2: supports D1 D2
[ 0.093443] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093448] pci 0000:00:10.2: PME# disabled
[ 0.093468] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 0.093517] pci 0000:00:10.3: reg 20: [io 0xb000-0xb01f]
[ 0.093561] pci 0000:00:10.3: supports D1 D2
[ 0.093564] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093569] pci 0000:00:10.3: PME# disabled
[ 0.093591] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.093611] pci 0000:00:10.4: reg 10: [mem 0xf9fff800-0xf9fff8ff]
[ 0.093696] pci 0000:00:10.4: supports D1 D2
[ 0.093698] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093703] pci 0000:00:10.4: PME# disabled
[ 0.093730] pci 0000:00:11.0: [1106:3287] type 0 class 0x000601
[ 0.093850] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
[ 0.093923] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.093942] pci 0000:00:12.0: reg 10: [io 0xa800-0xa8ff]
[ 0.093953] pci 0000:00:12.0: reg 14: [mem 0xf9fff400-0xf9fff4ff]
[ 0.094026] pci 0000:00:12.0: supports D1 D2
[ 0.094028] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.094033] pci 0000:00:12.0: PME# disabled
[ 0.094049] pci 0000:00:13.0: [1106:287b] type 1 class 0x000604
[ 0.094092] pci 0000:00:13.1: [1106:287a] type 1 class 0x000604
[ 0.094147] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.094169] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.094187] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.094205] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.094229] PCI: peer root bus 00 res updated from pci conf
[ 0.094289] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.094724] pci 0000:02:00.0: [10de:0a23] type 0 class 0x000300
[ 0.094739] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.094754] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.094769] pci 0000:02:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.094780] pci 0000:02:00.0: reg 24: [io 0xe800-0xe87f]
[ 0.094791] pci 0000:02:00.0: reg 30: [mem 0xfbe80000-0xfbefffff pref]
[ 0.094875] pci 0000:02:00.1: [10de:0be2] type 0 class 0x000403
[ 0.094889] pci 0000:02:00.1: reg 10: [mem 0xfbe7c000-0xfbe7ffff]
[ 0.097013] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.097377] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.097382] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.097390] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.097421] pci 0000:04:01.0: [1106:3288] type 0 class 0x000403
[ 0.097434] pci 0000:04:01.0: reg 10: [mem 0xfbffc000-0xfbffffff]
[ 0.097516] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.097521] pci 0000:04:01.0: PME# disabled
[ 0.097534] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.098033] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[ 0.098398] pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.098453] pci 0000:00:13.1: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.098999] pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.099002] pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.099006] pci 0000:00:13.1: bridge window [mem 0xc0000000-0xfcffffffff] (subtractive decode)
[ 0.099029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.099177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.099199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.099279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.099318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.099383] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.099746] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.099992] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.115184] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.116052] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.117583] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.118711] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.119914] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.121450] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123030] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.124455] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.126116] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.126771] vgaarb: loaded
[ 0.126991] vgaarb: bridge control possible 0000:02:00.0
[ 0.127546] SCSI subsystem initialized
[ 0.128127] libata version 3.00 loaded.
[ 0.128381] usbcore: registered new interface driver usbfs
[ 0.128791] usbcore: registered new interface driver hub
[ 0.129049] usbcore: registered new device driver usb
[ 0.129679] PCI: Using ACPI for IRQ routing
[ 0.139994] PCI: pci_cache_line_size set to 64 bytes
[ 0.140006] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff]
[ 0.140763] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.140766] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
[ 0.141169] cfg80211: Calling CRDA to update world regulatory domain
[ 0.141686] NetLabel: Initializing
[ 0.141998] NetLabel: domain hash size = 128
[ 0.142358] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.142729] NetLabel: unlabeled traffic allowed by default
[ 0.150186] pnp: PnP ACPI init
[ 0.150559] ACPI: bus type pnp registered
[ 0.151048] pnp 00:00: [bus 00-ff]
[ 0.151051] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.151054] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.151056] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.151059] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.151062] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.151065] pnp 00:00: [mem 0xc0000000-0xfff7ffff window]
[ 0.151176] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.151206] pnp 00:01: [dma 4]
[ 0.151209] pnp 00:01: [io 0x0000-0x000f]
[ 0.151211] pnp 00:01: [io 0x0081-0x0083]
[ 0.151214] pnp 00:01: [io 0x0087]
[ 0.151216] pnp 00:01: [io 0x0089-0x008b]
[ 0.151218] pnp 00:01: [io 0x008f]
[ 0.151220] pnp 00:01: [io 0x00c0-0x00df]
[ 0.151282] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.151294] pnp 00:02: [io 0x0070-0x0071]
[ 0.151305] pnp 00:02: [irq 8]
[ 0.151365] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.151376] pnp 00:03: [io 0x0061]
[ 0.151433] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.151443] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.151449] pnp 00:04: [irq 13]
[ 0.151509] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.151973] pnp 00:05: [io 0x0378-0x037f]
[ 0.151975] pnp 00:05: [io 0x0778-0x077b]
[ 0.151981] pnp 00:05: [irq 7]
[ 0.151997] pnp 00:05: [dma 3]
[ 0.152192] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.152228] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.152231] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.152234] pnp 00:06: [io 0x0290-0x0297]
[ 0.152336] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.152699] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152795] pnp 00:07: [io 0x0010-0x001f]
[ 0.152798] pnp 00:07: [io 0x0022-0x003f]
[ 0.152800] pnp 00:07: [io 0x0044-0x005f]
[ 0.152802] pnp 00:07: [io 0x0062-0x0063]
[ 0.152805] pnp 00:07: [io 0x0065-0x006f]
[ 0.152807] pnp 00:07: [io 0x0072-0x007f]
[ 0.152809] pnp 00:07: [io 0x0080]
[ 0.152812] pnp 00:07: [io 0x0084-0x0086]
[ 0.152814] pnp 00:07: [io 0x0088]
[ 0.152816] pnp 00:07: [io 0x008c-0x008e]
[ 0.152819] pnp 00:07: [io 0x0090-0x009f]
[ 0.152821] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.152823] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.152826] pnp 00:07: [io 0x03e0-0x03e7]
[ 0.152831] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.152834] pnp 00:07: [io 0x0800-0x087f]
[ 0.152836] pnp 00:07: [io 0x0400-0x041f]
[ 0.152839] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.152842] pnp 00:07: [mem 0xffb00000-0xffbfffff]
[ 0.152939] system 00:07: [io 0x03e0-0x03e7] has been reserved
[ 0.153005] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.153366] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.153987] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.154988] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.155351] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156014] pnp 00:08: [io 0x0060]
[ 0.156016] pnp 00:08: [io 0x0064]
[ 0.156023] pnp 00:08: [irq 1]
[ 0.156086] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.156158] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.156161] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.156238] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.156602] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.156965] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.157270] pnp 00:0a: [irq 3]
[ 0.157273] pnp 00:0a: [dma 0 disabled]
[ 0.157275] pnp 00:0a: [io 0x02f8-0x02ff]
[ 0.157414] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.157451] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.157536] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.157900] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.158258] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.158265] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.158267] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.158270] pnp 00:0c: [mem 0x00100000-0xbfffffff]
[ 0.158272] pnp 00:0c: [mem 0xfff80000-0xffffffff]
[ 0.158278] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.158936] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.158987] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.159986] pnp 00:0c: disabling [mem 0x00100000-0xbfffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.161028] system 00:0c: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.161391] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.161539] pnp: PnP ACPI: found 13 devices
[ 0.161897] ACPI: ACPI bus type pnp unregistered
[ 0.166914] Switching to clocksource acpi_pm
[ 0.167013] PCI: max bus depth: 1 pci_try_num: 2
[ 0.167040] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.167410] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.167778] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.168150] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.168515] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.169179] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[ 0.169542] pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.169911] pci 0000:00:13.1: PCI bridge to [bus 05-05]
[ 0.170296] pci 0000:00:01.0: setting latency timer to 64
[ 0.170315] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.170680] pci 0000:00:02.0: setting latency timer to 64
[ 0.170688] pci 0000:00:13.0: setting latency timer to 64
[ 0.170696] pci 0000:00:13.1: setting latency timer to 64
[ 0.170700] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.170703] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.170706] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xfcffffffff]
[ 0.170709] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.170712] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbefffff]
[ 0.170715] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.170718] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.170721] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.170724] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.170727] pci_bus 0000:05: resource 6 [mem 0xc0000000-0xfcffffffff]
[ 0.170773] NET: Registered protocol family 2
[ 0.171334] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.173980] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.179317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.180316] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.180680] TCP reno registered
[ 0.181068] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.181480] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.181990] NET: Registered protocol family 1
[ 0.182473] RPC: Registered named UNIX socket transport module.
[ 0.182834] RPC: Registered udp transport module.
[ 0.183202] RPC: Registered tcp transport module.
[ 0.183561] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.183929] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.184321] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.184685] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[ 0.185084] pci 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.185448] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.185451] pci 0000:00:10.0: Performing full reset
[ 0.185466] pci 0000:00:10.0: PCI INT A disabled
[ 0.185836] pci 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.186208] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.186210] pci 0000:00:10.1: Performing full reset
[ 0.186224] pci 0000:00:10.1: PCI INT C disabled
[ 0.186597] pci 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.186962] pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.186964] pci 0000:00:10.2: Performing full reset
[ 0.186978] pci 0000:00:10.2: PCI INT B disabled
[ 0.187361] pci 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.187725] pci 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.187727] pci 0000:00:10.3: Performing full reset
[ 0.187741] pci 0000:00:10.3: PCI INT D disabled
[ 0.188117] pci 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.188500] pci 0000:00:10.4: PCI INT C disabled
[ 0.188887] pci 0000:02:00.0: Boot video device
[ 0.188896] PCI: CLS 64 bytes, default 64
[ 0.189022] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 0.193064] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.194102] microcode: CPU0: family 15 not supported
[ 0.194825] audit: initializing netlink socket (disabled)
[ 0.195246] type=2000 audit(1340475371.194:1): initialized
[ 0.238187] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.244398] msgmni has been set to 6021
[ 0.244889] SELinux: Registering netfilter hooks
[ 0.245381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.246062] io scheduler noop registered
[ 0.246420] io scheduler deadline registered
[ 0.246852] io scheduler cfq registered (default)
[ 0.247414] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.247705] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.248169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.513137] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.534400] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.535164] Non-volatile memory driver v1.3
[ 0.535524] Linux agpgart interface v0.103
[ 0.536079] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 0.536973] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.537661] ACPI: Sleep Button [SLPB]
[ 0.538126] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.538779] ACPI: Power Button [PWRB]
[ 0.539271] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.539924] ACPI: Power Button [PWRF]
[ 0.540633] ACPI: acpi_idle registered with cpuidle
[ 0.545356] brd: module loaded
[ 0.547064] loop: module loaded
[ 0.547469] i2c-core: driver [fsa9480] using legacy suspend method
[ 0.547831] i2c-core: driver [fsa9480] using legacy resume method
[ 0.548626] ahci 0000:00:0f.0: version 3.0
[ 0.548643] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.549063] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[ 0.549424] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[ 0.549833] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[ 0.550236] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 0.550890] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[ 0.552671] scsi0 : ahci
[ 0.553212] scsi1 : ahci
[ 0.553707] scsi2 : ahci
[ 0.554231] scsi3 : ahci
[ 0.554949] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 21
[ 0.555623] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 21
[ 0.556283] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 21
[ 0.556936] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 21
[ 0.558136] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.558498] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.558908] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.559294] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.559836] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 0.560235] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.561242] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1a800, 00:18:f3:53:20:1b, IRQ 23
[ 0.562613] via-rhine 0000:00:12.0: eth0: MII PHY found at ad

[cwc]

First thing I would try: Downgrade the nvidia driver back to what it was before.

I doowngraded with no luck. I still get a black screen which tells me it's an Xorg problem.

I'll try to re emerge xorg-server and xorg-drivers

[univerz]

if you are using KDE, try to look at /var/log/kdm.log

in my case there was problem with libattica, re-emerge kdelibs and attica solved the problem.

[cwc]

thanks for the help
revdep-rebuild solved the problem
I did not watch but it could have picked up the problem packages.
I also re-emerged xorg-base