Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Pcmcia USB 2.0 con webcam
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
UnoSD
Apprentice
Apprentice


Joined: 27 Jun 2011
Posts: 273

PostPosted: Thu Jun 14, 2012 6:45 pm    Post subject: Pcmcia USB 2.0 con webcam Reply with quote

Salve a tutti,

ho appena preso una scheda pcmcia usb 2.0 per il mio portatile (che supportava solo le 1.1), ho attivato il supporto ad ehci nel kernel ed eccoci! Rilevata la scheda.

Ho provato a collegare la webcam ma non la rileva... Questo è il mio /var/log/messages quando collego l'hub:

Code:
Jun 14 19:35:37 localhost kernel: [  627.333094] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jun 14 19:35:37 localhost kernel: [  627.333133] pci 0000:03:00.0: [1033:0035] type 0 class 0x000c03
Jun 14 19:35:37 localhost kernel: [  627.333168] pci 0000:03:00.0: reg 10: [mem 0x00000000-0x00000fff]
Jun 14 19:35:37 localhost kernel: [  627.333275] pci 0000:03:00.0: supports D1 D2
Jun 14 19:35:37 localhost kernel: [  627.333281] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
Jun 14 19:35:37 localhost kernel: [  627.333290] pci 0000:03:00.0: PME# disabled
Jun 14 19:35:37 localhost kernel: [  627.333323] pci 0000:03:00.1: [1033:0035] type 0 class 0x000c03
Jun 14 19:35:37 localhost kernel: [  627.333351] pci 0000:03:00.1: reg 10: [mem 0x00000000-0x00000fff]
Jun 14 19:35:37 localhost kernel: [  627.333451] pci 0000:03:00.1: supports D1 D2
Jun 14 19:35:37 localhost kernel: [  627.333456] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
Jun 14 19:35:37 localhost kernel: [  627.333464] pci 0000:03:00.1: PME# disabled
Jun 14 19:35:37 localhost kernel: [  627.333494] pci 0000:03:00.2: [1033:00e0] type 0 class 0x000c03
Jun 14 19:35:37 localhost kernel: [  627.333522] pci 0000:03:00.2: reg 10: [mem 0x00000000-0x000000ff]
Jun 14 19:35:37 localhost kernel: [  627.333621] pci 0000:03:00.2: supports D1 D2
Jun 14 19:35:37 localhost kernel: [  627.333626] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
Jun 14 19:35:37 localhost kernel: [  627.333634] pci 0000:03:00.2: PME# disabled
Jun 14 19:35:37 localhost kernel: [  627.333670] pci 0000:03:00.0: BAR 0: assigned [mem 0x34000000-0x34000fff]
Jun 14 19:35:37 localhost kernel: [  627.333682] pci 0000:03:00.0: BAR 0: set to [mem 0x34000000-0x34000fff] (PCI address [0x34000000-0x34000fff])
Jun 14 19:35:37 localhost kernel: [  627.333690] pci 0000:03:00.1: BAR 0: assigned [mem 0x34001000-0x34001fff]
Jun 14 19:35:37 localhost kernel: [  627.333701] pci 0000:03:00.1: BAR 0: set to [mem 0x34001000-0x34001fff] (PCI address [0x34001000-0x34001fff])
Jun 14 19:35:37 localhost kernel: [  627.333708] pci 0000:03:00.2: BAR 0: assigned [mem 0x34002000-0x340020ff]
Jun 14 19:35:37 localhost kernel: [  627.333719] pci 0000:03:00.2: BAR 0: set to [mem 0x34002000-0x340020ff] (PCI address [0x34002000-0x340020ff])
Jun 14 19:35:37 localhost kernel: [  627.341326] ehci_hcd 0000:03:00.2: enabling device (0000 -> 0002)
Jun 14 19:35:37 localhost kernel: [  627.341355] ehci_hcd 0000:03:00.2: PCI INT C -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
Jun 14 19:35:37 localhost kernel: [  627.341411] ehci_hcd 0000:03:00.2: EHCI Host Controller
Jun 14 19:35:37 localhost kernel: [  627.341604] ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 3
Jun 14 19:35:37 localhost kernel: [  627.341622] ehci_hcd 0000:03:00.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
Jun 14 19:35:37 localhost kernel: [  627.341634] ehci_hcd 0000:03:00.2: reset portroute 1 0 1 0 0
Jun 14 19:35:37 localhost kernel: [  627.341642] ehci_hcd 0000:03:00.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024
Jun 14 19:35:37 localhost kernel: [  627.341757] ehci_hcd 0000:03:00.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 14 19:35:37 localhost kernel: [  627.341766] ehci_hcd 0000:03:00.2: ...powerup ports...
Jun 14 19:35:37 localhost kernel: [  627.362103] ehci_hcd 0000:03:00.2: MWI active
Jun 14 19:35:37 localhost kernel: [  627.362112] ehci_hcd 0000:03:00.2: supports USB remote wakeup
Jun 14 19:35:37 localhost kernel: [  627.362142] ehci_hcd 0000:03:00.2: irq 5, io mem 0x34002000
Jun 14 19:35:37 localhost kernel: [  627.362155] ehci_hcd 0000:03:00.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 14 19:35:37 localhost kernel: [  627.362169] ehci_hcd 0000:03:00.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
Jun 14 19:35:37 localhost kernel: [  627.368086] ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 0.95
Jun 14 19:35:37 localhost kernel: [  627.368209] usb usb3: default language 0x0409
Jun 14 19:35:37 localhost kernel: [  627.368227] usb usb3: udev 1, busnum 3, minor = 256
Jun 14 19:35:37 localhost kernel: [  627.368232] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Jun 14 19:35:37 localhost kernel: [  627.368238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 14 19:35:37 localhost kernel: [  627.368243] usb usb3: Product: EHCI Host Controller
Jun 14 19:35:37 localhost kernel: [  627.368248] usb usb3: Manufacturer: Linux 3.2.12-gentoo-unosd ehci_hcd
Jun 14 19:35:37 localhost kernel: [  627.368253] usb usb3: SerialNumber: 0000:03:00.2
Jun 14 19:35:37 localhost kernel: [  627.368494] usb usb3: usb_probe_device
Jun 14 19:35:37 localhost kernel: [  627.368503] usb usb3: configuration #1 chosen from 1 choice
Jun 14 19:35:38 localhost kernel: [  627.368526] usb usb3: adding 3-0:1.0 (config #1, interface 0)
Jun 14 19:35:38 localhost kernel: [  627.368589] hub 3-0:1.0: usb_probe_interface
Jun 14 19:35:38 localhost kernel: [  627.368595] hub 3-0:1.0: usb_probe_interface - got id
Jun 14 19:35:38 localhost kernel: [  627.368599] hub 3-0:1.0: USB hub found
Jun 14 19:35:38 localhost kernel: [  627.368625] hub 3-0:1.0: 5 ports detected
Jun 14 19:35:38 localhost kernel: [  627.368630] hub 3-0:1.0: standalone hub
Jun 14 19:35:38 localhost kernel: [  627.368634] hub 3-0:1.0: individual port power switching
Jun 14 19:35:38 localhost kernel: [  627.368638] hub 3-0:1.0: individual port over-current protection
Jun 14 19:35:38 localhost kernel: [  627.368643] hub 3-0:1.0: power on to power good time: 20ms
Jun 14 19:35:38 localhost kernel: [  627.368652] hub 3-0:1.0: local power source is good
Jun 14 19:35:38 localhost kernel: [  627.368657] hub 3-0:1.0: enabling power on all ports
Jun 14 19:35:38 localhost kernel: [  627.468194] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000


E questo è ciò che succede quando attacco la webcam:

Code:
Jun 14 19:36:43 localhost kernel: [  692.618788] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
Jun 14 19:36:43 localhost kernel: [  692.618810] ehci_hcd 0000:03:00.2: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
Jun 14 19:36:43 localhost kernel: [  692.618824] hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Jun 14 19:36:43 localhost kernel: [  692.722125] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
Jun 14 19:36:43 localhost kernel: [  692.773295] ehci_hcd 0000:03:00.2: port 1 full speed --> companion
Jun 14 19:36:43 localhost kernel: [  692.773311] ehci_hcd 0000:03:00.2: GetStatus port:1 status 003801 0  ACK POWER OWNER sig=j CONNECT
Jun 14 19:36:43 localhost kernel: [  692.773390] hub 3-0:1.0: port 1 not reset yet, waiting 50ms
Jun 14 19:36:43 localhost kernel: [  692.824097] ehci_hcd 0000:03:00.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
Jun 14 19:36:43 localhost kernel: [  692.824143] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002


Pensavo fosse l'hub ad avere qualche problema quando poi ho fatto un tentativo con l'adattatore wireless usb che invece ha funzionato alla perfezione (ora sto usando la connessione tramite l'adattatore collegato al nuovo hub.)

Qualche idea o suggerimento?

Grazie.
Back to top
View user's profile Send private message
UnoSD
Apprentice
Apprentice


Joined: 27 Jun 2011
Posts: 273

PostPosted: Tue Jun 19, 2012 4:39 pm    Post subject: Reply with quote

Il problema c'è anche con il cellulare collegato come modem usb. (Un Nokia E71 collegato come PC Suite)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum