Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
usb shows 'nada'...
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Wed Jun 06, 2012 4:10 pm    Post subject: usb shows 'nada'... Reply with quote

when I insert a usb on kde\razorqt nothing happens!
tia!
Back to top
View user's profile Send private message
PhaytalError
n00b
n00b


Joined: 17 May 2012
Posts: 46

PostPosted: Wed Jun 06, 2012 4:12 pm    Post subject: Re: usb shows 'nada'... Reply with quote

john-doe wrote:
when I insert a usb on kde\razorqt nothing happens!
tia!


What does dmesg say when you connect a USB device? Post its output here.
_________________
Linux. Freedom. Power.
Back to top
View user's profile Send private message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Wed Jun 06, 2012 4:18 pm    Post subject: Reply with quote

Thx 4 the reply dude!:
[code:1:d38b69b2b3] ~ $ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-gentoo (root@g) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #1 SMP Fri May 25 09:04:10 Local time zone must be set--see zic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7e4000 (usable)
[ 0.000000] BIOS-e820: 000000001f7e4000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7100 SFF(PC923A)/097Ch, BIOS 786C1 v01.05 06/16/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1f7e4 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe700] fe700
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f7e4000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001f400000 page 2M
[ 0.000000] 001f400000 - 001f7e4000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f7e4000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000e9c10 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 1f7f4040 00038 (v01 COMPAQ CPQ0968 20040616 00000000)
[ 0.000000] ACPI: FACP 1f7f40ec 00074 (v01 COMPAQ GRANTSD 00000001 00000000)
[ 0.000000] ACPI: DSDT 1f7f4267 0137A (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f7f4000 00040
[ 0.000000] ACPI: SSDT 1f7f55e1 02DE2 (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 1f7f4160 00068 (v01 COMPAQ GRANTSD 00000001 00000000)
[ 0.000000] ACPI: ASF! 1f7f41c8 00063 (v32 COMPAQ GRANTSD 00000001 00000000)
[ 0.000000] ACPI: MCFG 1f7f422b 0003C (v01 COMPAQ GRANTSD 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f7e4000
[ 0.000000] low ram: 0 - 1f7e4000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f7e4
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f7e4
[ 0.000000] On node 0 totalpages: 128883
[ 0.000000] free_area_init_node: node 0, pgdat c1861080, node_mem_map df3f3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 123924 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:b0000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df3d4000 s31360 r0 d21888 u53248
[ 0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127875
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 501088k/515984k available (6316k kernel code, 14444k reserved, 2315k data, 440k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdffe4000 - 0xff7fe000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf7e4000 ( 503 MB)
[ 0.000000] .init : 0xc186e000 - 0xc18dc000 ( 440 kB)
[ 0.000000] .data : 0xc162b038 - 0xc186dd00 (2315 kB)
[ 0.000000] .text : 0xc1000000 - 0xc162b038 (6316 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=dec0a000 soft=dec0c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2994.397 MHz processor.
[ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.79 BogoMIPS (lpj=2994397)
[ 0.002128] pid_max: default: 32768 minimum: 301
[ 0.002215] Security Framework initialized
[ 0.002279] SELinux: Initializing.
[ 0.003011] SELinux: Starting in permissive mode
[ 0.003033] Mount-cache hash table entries: 512
[ 0.003350] Initializing cgroup subsys cpuacct
[ 0.003414] Initializing cgroup subsys freezer
[ 0.003513] CPU: Physical Processor ID: 0
[ 0.003575] CPU: Processor Core ID: 0
[ 0.003636] mce: CPU supports 4 MCE banks
[ 0.003706] CPU0: Thermal monitoring enabled (TM1)
[ 0.003771] using mwait in idle threads.
[ 0.004015] ACPI: Core revision 20120320
[ 0.007062] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.007500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.017713] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.017998] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.017998] ... version: 0
[ 0.017998] ... bit width: 40
[ 0.017998] ... generic registers: 18
[ 0.017998] ... value mask: 000000ffffffffff
[ 0.017998] ... max period: 0000007fffffffff
[ 0.017998] ... fixed-purpose events: 0
[ 0.017998] ... event mask: 000000000003ffff
[ 0.017998] CPU 1 irqstacks, hard=dec7e000 soft=dec80000
[ 0.017998] Booting Node 0, Processors #1 Ok.
[ 0.002999] Initializing CPU#1
[ 0.030017] Brought up 2 CPUs
[ 0.030140] Total of 2 processors activated (11977.58 BogoMIPS).
[ 0.031065] devtmpfs: initialized
[ 0.031303] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.031303] RTC time: 9:21:03, date: 06/06/12
[ 0.031335] NET: Registered protocol family 16
[ 0.032042] kworker/u:0 used greatest stack depth: 7436 bytes left
[ 0.032147] kworker/u:0 used greatest stack depth: 7376 bytes left
[ 0.032147] ACPI: bus type pci registered
[ 0.033039] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[ 0.033039] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[ 0.033068] PCI: Using MMCONFIG for extended config space
[ 0.033131] PCI: Using configuration type 1 for base access
[ 0.033273] kworker/u:0 used greatest stack depth: 7160 bytes left
[ 0.034041] kworker/u:0 used greatest stack depth: 6992 bytes left
[ 0.047041] bio: create slab <bio-0> at 0
[ 0.047134] ACPI: Added _OSI(Module Device)
[ 0.047134] ACPI: Added _OSI(Processor Device)
[ 0.047161] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.047224] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048815] ACPI: EC: Look up EC in DSDT
[ 0.053283] ACPI: Interpreter enabled
[ 0.053360] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.053556] ACPI: Using IOAPIC for interrupt routing
[ 0.060145] ACPI: No dock devices found.
[ 0.060219] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.064263] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.064421] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.064424] _OSC request data:1 8 1f
[ 0.064431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.064979] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.064984] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.064987] pci_root PNP0A08:00: host bridge window [io 0x1000-0x1fff] (ignored)
[ 0.064999] pci_root PNP0A08:00: host bridge window [io 0x3000-0x4fff] (ignored)
[ 0.065003] pci_root PNP0A08:00: host bridge window [io 0x7000-0x9fff] (ignored)
[ 0.065006] pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
[ 0.065010] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.065014] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xcfffffff] (ignored)
[ 0.065017] PCI: root bus 00: using default resources
[ 0.065069] PCI host bridge to bus 0000:00
[ 0.065088] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.065153] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.065231] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
[ 0.065287] pci 0000:00:02.0: [8086:2582] type 00 class 0x030000
[ 0.065301] pci 0000:00:02.0: reg 10: [mem 0xcfe00000-0xcfe7ffff]
[ 0.065309] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.065317] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[ 0.065325] pci 0000:00:02.0: reg 1c: [mem 0xcff00000-0xcff3ffff]
[ 0.065369] pci 0000:00:02.1: [8086:2782] type 00 class 0x038000
[ 0.065381] pci 0000:00:02.1: reg 10: [mem 0xcfe80000-0xcfefffff]
[ 0.065474] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.065555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.065582] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
[ 0.065663] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.065692] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.065738] pci 0000:00:1d.0: reg 20: [io 0x1440-0x145f]
[ 0.065774] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.065821] pci 0000:00:1d.1: reg 20: [io 0x1460-0x147f]
[ 0.065861] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.066012] pci 0000:00:1d.2: reg 20: [io 0x1480-0x149f]
[ 0.066050] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.066096] pci 0000:00:1d.3: reg 20: [io 0x14a0-0x14bf]
[ 0.066142] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.066165] pci 0000:00:1d.7: reg 10: [mem 0xcff40000-0xcff403ff]
[ 0.066257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.066280] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.066351] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.066368] pci 0000:00:1e.2: reg 10: [io 0x1000-0x10ff]
[ 0.066378] pci 0000:00:1e.2: reg 14: [io 0x1400-0x143f]
[ 0.066389] pci 0000:00:1e.2: reg 18: [mem 0xcff40400-0xcff405ff]
[ 0.066399] pci 0000:00:1e.2: reg 1c: [mem 0xcff40600-0xcff406ff]
[ 0.066446] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.066470] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
[ 0.066560] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.066571] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.066675] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.066743] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0400-047f
[ 0.066810] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0480-048f
[ 0.066894] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.066910] pci 0000:00:1f.1: reg 10: [io 0x1808-0x180f]
[ 0.066921] pci 0000:00:1f.1: reg 14: [io 0x1828-0x182b]
[ 0.066932] pci 0000:00:1f.1: reg 18: [io 0x1810-0x1817]
[ 0.066943] pci 0000:00:1f.1: reg 1c: [io 0x182c-0x182f]
[ 0.066954] pci 0000:00:1f.1: reg 20: [io 0x14e0-0x14ef]
[ 0.067003] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
[ 0.067021] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.067031] pci 0000:00:1f.2: reg 14: [io 0x1830-0x1833]
[ 0.067041] pci 0000:00:1f.2: reg 18: [io 0x1820-0x1827]
[ 0.067050] pci 0000:00:1f.2: reg 1c: [io 0x1834-0x1837]
[ 0.067060] pci 0000:00:1f.2: reg 20: [io 0x14f0-0x14ff]
[ 0.067102] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.067162] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.067303] pci 0000:40:00.0: [14e4:1677] type 00 class 0x020000
[ 0.067330] pci 0000:40:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
[ 0.067462] pci 0000:40:00.0: PME# supported from D3hot D3cold
[ 0.067482] pci 0000:40:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.067593] pci 0000:00:1c.1: PCI bridge to [bus 40-40]
[ 0.067660] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf04fffff]
[ 0.067736] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.067811] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.067814] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.067833] pci_bus 0000:00: on NUMA node 0
[ 0.067839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.068070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.068151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 0.068235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.068601] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.068756] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.068759] _OSC request data:1 1f 1f
[ 0.068765] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.068906] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.069058] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.069060] _OSC request data:1 0 1d
[ 0.069068] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
[ 0.069163] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.077239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.078073] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.078452] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.078830] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.079208] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.079589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.079967] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.080342] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.081024] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.081036] vgaarb: loaded
[ 0.081096] vgaarb: bridge control possible 0000:00:02.0
[ 0.081277] SCSI subsystem initialized
[ 0.081277] libata version 3.00 loaded.
[ 0.082061] usbcore: registered new interface driver usbfs
[ 0.082120] usbcore: registered new interface driver hub
[ 0.082120] usbcore: registered new device driver usb
[ 0.082120] PCI: Using ACPI for IRQ routing
[ 0.090170] PCI: pci_cache_line_size set to 64 bytes
[ 0.090245] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.090249] reserve RAM buffer: 000000001f7e4000 - 000000001fffffff
[ 0.090285] cfg80211: Calling CRDA to update world regulatory domain
[ 0.090285] NetLabel: Initializing
[ 0.091020] NetLabel: domain hash size = 128
[ 0.091083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.091161] NetLabel: unlabeled traffic allowed by default
[ 0.092101] hpet clockevent registered
[ 0.092106] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.092176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.092330] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.095016] Switching to clocksource hpet
[ 0.107276] pnp: PnP ACPI init
[ 0.107351] ACPI: bus type pnp registered
[ 0.107748] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.107753] pnp 00:00: [bus 00-ff]
[ 0.107756] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.107760] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.107763] pnp 00:00: [io 0x1000-0x1fff window]
[ 0.107766] pnp 00:00: [io 0x3000-0x4fff window]
[ 0.107769] pnp 00:00: [io 0x7000-0x9fff window]
[ 0.107772] pnp 00:00: [io 0xb000-0xffff window]
[ 0.107775] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.107779] pnp 00:00: [mem 0x20000000-0xcfffffff window]
[ 0.107895] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.107938] pnp 00:01: [io 0x00f0-0x00ff]
[ 0.107954] pnp 00:01: [irq 13]
[ 0.108056] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.108080] pnp 00:02: [io 0x0000-0x000f]
[ 0.108083] pnp 00:02: [io 0x0080-0x008f]
[ 0.108086] pnp 00:02: [io 0x00c0-0x00df]
[ 0.108089] pnp 00:02: [dma 4]
[ 0.108169] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.108187] pnp 00:03: [io 0x0070-0x0071]
[ 0.108197] pnp 00:03: [irq 8]
[ 0.108279] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.108296] pnp 00:04: [io 0x0061]
[ 0.108377] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.108400] pnp 00:05: [irq 12]
[ 0.108482] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.108500] pnp 00:06: [io 0x0060]
[ 0.108503] pnp 00:06: [io 0x0064]
[ 0.108512] pnp 00:06: [irq 1]
[ 0.108600] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.108942] pnp 00:07: [irq 7]
[ 0.108945] pnp 00:07: [dma 3]
[ 0.108949] pnp 00:07: [io 0x0378-0x037f]
[ 0.108952] pnp 00:07: [io 0x0778-0x077d]
[ 0.109130] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.109398] pnp 00:08: [irq 4]
[ 0.109402] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.109554] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.109792] pnp 00:09: [irq 6]
[ 0.109796] pnp 00:09: [dma 2]
[ 0.109799] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.109802] pnp 00:09: [io 0x03f7]
[ 0.109907] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.109979] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.110243] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.110277] pnp 00:0b: [io 0x0010-0x001f]
[ 0.110280] pnp 00:0b: [io 0x0050-0x0053]
[ 0.110283] pnp 00:0b: [io 0x0072-0x0077]
[ 0.110286] pnp 00:0b: [io 0x0090-0x009f]
[ 0.110402] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.110422] pnp 00:0c: [io 0x0400-0x041f]
[ 0.110426] pnp 00:0c: [io 0x0420-0x043f]
[ 0.110429] pnp 00:0c: [io 0x0440-0x045f]
[ 0.110431] pnp 00:0c: [io 0x0460-0x047f]
[ 0.110434] pnp 00:0c: [io 0x0480-0x048f]
[ 0.110437] pnp 00:0c: [io 0xf800-0xf81f]
[ 0.110440] pnp 00:0c: [io 0xf820-0xf83f]
[ 0.110442] pnp 00:0c: [io 0xf840-0xf85f]
[ 0.110445] pnp 00:0c: [io 0xf860-0xf87f]
[ 0.110448] pnp 00:0c: [io 0xfa00-0xfa3f]
[ 0.110451] pnp 00:0c: [io 0xfc00-0xfc7f]
[ 0.110453] pnp 00:0c: [io 0xfc80-0xfcff]
[ 0.110456] pnp 00:0c: [io 0xfe00-0xfe7f]
[ 0.110459] pnp 00:0c: [io 0xfe80-0xfeff]
[ 0.110482] pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
[ 0.110590] pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
[ 0.110693] pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
[ 0.110796] pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
[ 0.110993] system 00:0c: [io 0x0400-0x041f] has been reserved
[ 0.111074] system 00:0c: [io 0x0420-0x043f] has been reserved
[ 0.111140] system 00:0c: [io 0x0440-0x045f] has been reserved
[ 0.111204] system 00:0c: [io 0x0460-0x047f] has been reserved
[ 0.111269] system 00:0c: [io 0x0480-0x048f] has been reserved
[ 0.111333] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
[ 0.111398] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
[ 0.111463] system 00:0c: [io 0xfc80-0xfcff] has been reserved
[ 0.111526] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
[ 0.111589] system 00:0c: [io 0xfe80-0xfeff] has been reserved
[ 0.111654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.111693] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.111697] pnp 00:0d: [io 0x2000-0x2fff window]
[ 0.111700] pnp 00:0d: [io 0x5000-0x6fff window]
[ 0.111703] pnp 00:0d: [io 0xa000-0xafff window]
[ 0.111817] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.111882] system 00:0d: [io 0x2000-0x2fff window] has been reserved
[ 0.111946] system 00:0d: [io 0x5000-0x6fff window] has been reserved
[ 0.112066] system 00:0d: [io 0xa000-0xafff window] has been reserved
[ 0.112132] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.115052] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.115057] pnp 00:0e: [mem 0x00100000-0x1fffffff]
[ 0.115060] pnp 00:0e: [mem 0x000e8000-0x000fffff]
[ 0.115063] pnp 00:0e: [mem 0xfec01000-0xffffffff]
[ 0.115066] pnp 00:0e: [mem 0xd0000000-0xdfffffff]
[ 0.115069] pnp 00:0e: [mem 0x000cd800-0x000e7fff]
[ 0.115193] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.115262] system 00:0e: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.115329] system 00:0e: [mem 0x000e8000-0x000fffff] could not be reserved
[ 0.115395] system 00:0e: [mem 0xfec01000-0xffffffff] has been reserved
[ 0.115461] system 00:0e: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.115527] system 00:0e: [mem 0x000cd800-0x000e7fff] has been reserved
[ 0.115594] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.115608] pnp: PnP ACPI: found 15 devices
[ 0.115670] ACPI: ACPI bus type pnp unregistered
[ 0.150486] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20-20] add_size 1000
[ 0.150493] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20-20] add_size 200000
[ 0.150498] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20-20] add_size 200000
[ 0.150509] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 40-40] add_size 1000
[ 0.150514] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 40-40] add_size 200000
[ 0.150531] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.150536] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.150540] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.150544] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.150548] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.150556] pci 0000:00:1c.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
[ 0.150624] pci 0000:00:1c.0: BAR 9: assigned [mem 0x20200000-0x203fffff 64bit pref]
[ 0.150724] pci 0000:00:1c.1: BAR 9: assigned [mem 0x20400000-0x205fffff 64bit pref]
[ 0.150824] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.150889] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.150954] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.151048] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.151116] pci 0000:00:1c.0: bridge window [mem 0x20000000-0x201fffff]
[ 0.151184] pci 0000:00:1c.0: bridge window [mem 0x20200000-0x203fffff 64bit pref]
[ 0.151288] pci 0000:00:1c.1: PCI bridge to [bus 40-40]
[ 0.151352] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.151420] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf04fffff]
[ 0.151488] pci 0000:00:1c.1: bridge window [mem 0x20400000-0x205fffff 64bit pref]
[ 0.151591] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.151693] pci 0000:00:1e.0: setting latency timer to 64
[ 0.151699] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.151703] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.151706] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff]
[ 0.151710] pci_bus 0000:20: resource 1 [mem 0x20000000-0x201fffff]
[ 0.151713] pci_bus 0000:20: resource 2 [mem 0x20200000-0x203fffff 64bit pref]
[ 0.151716] pci_bus 0000:40: resource 0 [io 0x4000-0x4fff]
[ 0.151720] pci_bus 0000:40: resource 1 [mem 0xf0200000-0xf04fffff]
[ 0.151723] pci_bus 0000:40: resource 2 [mem 0x20400000-0x205fffff 64bit pref]
[ 0.151727] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.151730] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[ 0.151789] NET: Registered protocol family 2
[ 0.151924] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.152155] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.152320] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.152450] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.152514] TCP: reno registered
[ 0.152575] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.152641] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.152773] NET: Registered protocol family 1
[ 0.152949] RPC: Registered named UNIX socket transport module.
[ 0.153029] RPC: Registered udp transport module.
[ 0.153092] RPC: Registered tcp transport module.
[ 0.153154] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.153231] pci 0000:00:02.0: Boot video device
[ 0.153262] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0020
[ 0.153266] pci 0000:00:1d.0: Performing full reset
[ 0.153296] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0020
[ 0.153299] pci 0000:00:1d.1: Performing full reset
[ 0.153328] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0020
[ 0.153331] pci 0000:00:1d.2: Performing full reset
[ 0.153359] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.153362] pci 0000:00:1d.3: Performing full reset
[ 0.153429] PCI: CLS 64 bytes, default 64
[ 0.154547] microcode: CPU0 sig=0xf34, pf=0x10, revision=0x13
[ 0.154621] microcode: CPU1 sig=0xf34, pf=0x10, revision=0x13
[ 0.154765] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.155336] audit: initializing netlink socket (disabled)
[ 0.155413] type=2000 audit(1338974463.154:1): initialized
[ 0.175876] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.181329] VFS: Disk quotas dquot_6.5.2
[ 0.181512] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.183035] NFS: Registering the id_resolver key type
[ 0.183469] msgmni has been set to 978
[ 0.183659] SELinux: Registering netfilter hooks
[ 0.184370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.184472] io scheduler noop registered
[ 0.184533] io scheduler deadline registered
[ 0.184602] io scheduler cfq registered (default)
[ 0.184852] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.185080] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.185392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.185566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.450129] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.471500] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.472173] Non-volatile memory driver v1.3
[ 0.472274] intel_rng: Firmware space is locked read-only. If you can't or
[ 0.472276] intel_rng: don't want to disable this in firmware setup, and if
[ 0.472277] intel_rng: you are certain that your system has a functional
[ 0.472279] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 0.472558] Linux agpgart interface v0.103
[ 0.472785] agpgart-intel 0000:00:00.0: Intel 915G Chipset
[ 0.472956] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.473461] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.473743] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.474250] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.474358] ACPI: Power Button [PBTN]
[ 0.474521] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.474625] ACPI: Power Button [PWRF]
[ 0.478866] [drm] Initialized drm 1.1.0 20060810
[ 0.479277] pci 0000:00:02.0: setting latency timer to 64
[ 0.502795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.502868] [drm] No driver support for vblank timestamp query.
[ 0.502938] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.506392] brd: module loaded
[ 0.508280] loop: module loaded
[ 0.508806] ata_piix 0000:00:1f.1: version 2.13
[ 0.508871] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.509566] scsi0 : ata_piix
[ 0.509832] scsi1 : ata_piix
[ 0.510129] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14e0 irq 14
[ 0.510197] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14e8 irq 15
[ 0.510313] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.661049] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.661848] scsi2 : ata_piix
[ 0.662104] scsi3 : ata_piix
[ 0.662441] ata3: SATA max UDMA/133 cmd 0x1818 ctl 0x1830 bmdma 0x14f0 irq 19
[ 0.662517] ata4: SATA max UDMA/133 cmd 0x1820 ctl 0x1834 bmdma 0x14f8 irq 19
[ 0.663433] tg3.c:v3.123 (March 21, 2012)
[ 0.718144] tg3 0000:40:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:85:c0:a3:de
[ 0.718251] tg3 0000:40:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 0.718354] tg3 0000:40:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.718453] tg3 0000:40:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 0.718643] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.718710] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.718848] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.718914] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.719061] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
[ 0.719125] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.719262] sky2: driver version 1.30
[ 0.719866] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.719934] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 0.719976] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.719983] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.720083] drivers/usb/core/inode.c: creating file 'devices'
[ 0.720089] drivers/usb/core/inode.c: creating file '001'
[ 0.720205] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.720312] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 0.720318] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 0.720345] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.720411] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.724299] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.724304] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 0.724327] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcff40000
[ 0.724396] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.730022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.730121] usb usb1: default language 0x0409
[ 0.730131] usb usb1: udev 1, busnum 1, minor = 0
[ 0.730134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.730200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730298] usb usb1: Product: EHCI Host Controller
[ 0.730359] usb usb1: Manufacturer: Linux 3.4.0-gentoo ehci_hcd
[ 0.730422] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.730639] usb usb1: usb_probe_device
[ 0.730644] usb usb1: configuration #1 chosen from 1 choice
[ 0.730654] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.730732] hub 1-0:1.0: usb_probe_interface
[ 0.730736] hub 1-0:1.0: usb_probe_interface - got id
[ 0.730739] hub 1-0:1.0: USB hub found
[ 0.730804] hub 1-0:1.0: 8 ports detected
[ 0.730866] hub 1-0:1.0: standalone hub
[ 0.730869] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.730871] hub 1-0:1.0: individual port over-current protection
[ 0.730874] hub 1-0:1.0: power on to power good time: 20ms
[ 0.730880] hub 1-0:1.0: local power source is good
[ 0.730883] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.730925] drivers/usb/core/inode.c: creating file '001'
[ 0.731050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.731117] ohci_hcd: block sizes: ed 64 td 64
[ 0.731189] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.731293] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.731298] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.731366] drivers/usb/core/inode.c: creating file '002'
[ 0.731473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.731578] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.731643] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.731646] uhci_hcd 0000:00:1d.0: Performing full reset
[ 0.731660] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 0.731668] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001440
[ 0.731772] usb usb2: default language 0x0409
[ 0.731780] usb usb2: udev 1, busnum 2, minor = 128
[ 0.731783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.731849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.731947] usb usb2: Product: UHCI Host Controller
[ 0.732035] usb usb2: Manufacturer: Linux 3.4.0-gentoo uhci_hcd
[ 0.732101] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.732301] usb usb2: usb_probe_device
[ 0.732306] usb usb2: configuration #1 chosen from 1 choice
[ 0.732314] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.732388] hub 2-0:1.0: usb_probe_interface
[ 0.732391] hub 2-0:1.0: usb_probe_interface - got id
[ 0.732394] hub 2-0:1.0: USB hub found
[ 0.732458] hub 2-0:1.0: 2 ports detected
[ 0.732519] hub 2-0:1.0: standalone hub
[ 0.732521] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.732524] hub 2-0:1.0: individual port over-current protection
[ 0.732526] hub 2-0:1.0: power on to power good time: 2ms
[ 0.732532] hub 2-0:1.0: local power source is good
[ 0.732535] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.732556] drivers/usb/core/inode.c: creating file '001'
[ 0.732598] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 0.732623] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.732629] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.732698] drivers/usb/core/inode.c: creating file '003'
[ 0.732799] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.732902] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.732967] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.732969] uhci_hcd 0000:00:1d.1: Performing full reset
[ 0.732984] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 0.733023] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001460
[ 0.733124] usb usb3: default language 0x0409
[ 0.733133] usb usb3: udev 1, busnum 3, minor = 256
[ 0.733136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.733202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.733299] usb usb3: Product: UHCI Host Controller
[ 0.733362] usb usb3: Manufacturer: Linux 3.4.0-gentoo uhci_hcd
[ 0.733425] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.733623] usb usb3: usb_probe_device
[ 0.733628] usb usb3: configuration #1 chosen from 1 choice
[ 0.733635] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 0.733708] hub 3-0:1.0: usb_probe_interface
[ 0.733712] hub 3-0:1.0: usb_probe_interface - got id
[ 0.733714] hub 3-0:1.0: USB hub found
[ 0.734484] hub 3-0:1.0: 2 ports detected
[ 0.734547] hub 3-0:1.0: standalone hub
[ 0.734550] hub 3-0:1.0: no power switching (usb 1.0)
[ 0.734552] hub 3-0:1.0: individual port over-current protection
[ 0.734555] hub 3-0:1.0: power on to power good time: 2ms
[ 0.734560] hub 3-0:1.0: local power source is good
[ 0.734563] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 0.734586] drivers/usb/core/inode.c: creating file '001'
[ 0.734624] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 0.734651] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.734655] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.734723] drivers/usb/core/inode.c: creating file '004'
[ 0.734835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.734939] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.735037] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.735041] uhci_hcd 0000:00:1d.2: Performing full reset
[ 0.735055] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 0.735074] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001480
[ 0.735180] usb usb4: default language 0x0409
[ 0.735188] usb usb4: udev 1, busnum 4, minor = 384
[ 0.735192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.735256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.735354] usb usb4: Product: UHCI Host Controller
[ 0.735416] usb usb4: Manufacturer: Linux 3.4.0-gentoo uhci_hcd
[ 0.735480] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.735679] usb usb4: usb_probe_device
[ 0.735683] usb usb4: configuration #1 chosen from 1 choice
[ 0.735691] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 0.735764] hub 4-0:1.0: usb_probe_interface
[ 0.735768] hub 4-0:1.0: usb_probe_interface - got id
[ 0.735770] hub 4-0:1.0: USB hub found
[ 0.735835] hub 4-0:1.0: 2 ports detected
[ 0.735896] hub 4-0:1.0: standalone hub
[ 0.735898] hub 4-0:1.0: no power switching (usb 1.0)
[ 0.735901] hub 4-0:1.0: individual port over-current protection
[ 0.735904] hub 4-0:1.0: power on to power good time: 2ms
[ 0.735909] hub 4-0:1.0: local power source is good
[ 0.735912] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 0.735935] drivers/usb/core/inode.c: creating file '001'
[ 0.735972] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 0.735997] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.736015] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.736085] drivers/usb/core/inode.c: creating file '005'
[ 0.736188] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.736292] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.736357] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.736360] uhci_hcd 0000:00:1d.3: Performing full reset
[ 0.736374] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[ 0.736394] uhci_hcd 0000:00:1d.3: irq 22, io base 0x000014a0
[ 0.736494] usb usb5: default language 0x0409
[ 0.736502] usb usb5: udev 1, busnum 5, minor = 512
[ 0.736505] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.736571] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.736669] usb usb5: Product: UHCI Host Controller
[ 0.736731] usb usb5: Manufacturer: Linux 3.4.0-gentoo uhci_hcd
[ 0.736795] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.736992] usb usb5: usb_probe_device
[ 0.736997] usb usb5: configuration #1 chosen from 1 choice
[ 0.737018] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 0.737097] hub 5-0:1.0: usb_probe_interface
[ 0.737100] hub 5-0:1.0: usb_probe_interface - got id
[ 0.737103] hub 5-0:1.0: USB hub found
[ 0.737166] hub 5-0:1.0: 2 ports detected
[ 0.737227] hub 5-0:1.0: standalone hub
[ 0.737229] hub 5-0:1.0: no power switching (usb 1.0)
[ 0.737231] hub 5-0:1.0: individual port over-current protection
[ 0.737234] hub 5-0:1.0: power on to power good time: 2ms
[ 0.737240] hub 5-0:1.0: local power source is good
[ 0.737242] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 0.737263] drivers/usb/core/inode.c: creating file '001'
[ 0.737305] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[ 0.737456] usbcore: registered new interface driver usblp
[ 0.737521] Initializing USB Mass Storage driver...
[ 0.737672] usbcore: registered new interface driver usb-storage
[ 0.737736] USB Mass Storage support registered.
[ 0.737884] usbcore: registered new interface driver libusual
[ 0.738161] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.741037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.741107] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.741490] mousedev: PS/2 mouse device common for all mice
[ 0.741961] rtc_cmos 00:03: RTC can wake from S4
[ 0.742278] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.742369] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.742866] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.743079] cpuidle: using governor ladder
[ 0.743142] cpuidle: using governor menu
[ 0.743203] EFI Variables Facility v0.08 2004-May-17
[ 0.744696] usbcore: registered new interface driver usbhid
[ 0.744762] usbhid: USB HID core driver
[ 0.745181] Netfilter messages via NETLINK v0.30.
[ 0.745262] nf_conntrack version 0.5.0 (7829 buckets, 31316 max)
[ 0.745568] ctnetlink v0.93: registering with nfnetlink.
[ 0.745829] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.745935] TCP: cubic registered
[ 0.745995] Initializing XFRM netlink socket
[ 0.746425] NET: Registered protocol family 10
[ 0.746790] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.746892] IPv6 over IPv4 tunneling driver
[ 0.747307] NET: Registered protocol family 17
[ 0.747401] Registering the dns_resolver key type
[ 0.747530] Using IPI No-Shortcut mode
[ 0.747879] PM: Hibernation image not present or could not be loaded.
[ 0.747897] registered taskstats version 1
[ 0.748275] Magic number: 0:226:373
[ 0.748386] vc vcsa1: hash matches
[ 0.748472] console [netcon0] enabled
[ 0.748533] netconsole: network logging started
[ 0.764328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.823149] ata3.00: ATA-6: WDC WD400BD-75JMC0, 06.01C06, max UDMA/100
[ 0.823219] ata3.00: 78125000 sectors, multi 16: LBA
[ 0.826256] ata3.00: configured for UDMA/100
[ 0.826480] scsi 2:0:0:0: Direct-Access ATA WDC WD400BD-75JM 06.0 PQ: 0 ANSI: 5
[ 0.826954] sd 2:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 0.827154] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.827295] sd 2:0:0:0: [sda] Write Protect is off
[ 0.827364] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.827421] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.830060] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 0.832032] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.834033] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.835032] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.837030] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.864405] sda: sda1 sda2 sda3 sda4
[ 0.865267] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.865353] md: Waiting for all devices to be available before autodetect
[ 0.865421] md: If you don't use raid, use raid=noautodetect
[ 1.156029] Refined TSC clocksource calibration: 2994.384 MHz.
[ 1.156098] Switching to clocksource tsc
[ 1.367159] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 1.370241] md: Autodetecting RAID arrays.
[ 1.370305] md: Scanned 0 and added 0 devices.
[ 1.370367] md: autorun ...
[ 1.370426] md: ... autorun DONE.
[ 1.381796] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 1.389180] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 1.419887] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.420016] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 1.420120] Freeing unused kernel memory: 440k freed
[ 1.420482] Write protecting the kernel text: 6320k
[ 1.420584] Write protecting the kernel read-only data: 1948k
[ 1.954020] usb usb2: suspend_rh (auto-stop)
[ 1.954045] usb usb3: suspend_rh (auto-stop)
[ 1.954068] usb usb4: suspend_rh (auto-stop)
[ 1.954089] usb usb5: suspend_rh (auto-stop)
[ 2.219834] kbd_mode used greatest stack depth: 6428 bytes left
[ 2.261195] loadkeys used greatest stack depth: 6388 bytes left
[ 2.261535] init-early.sh used greatest stack depth: 6172 bytes left
[ 3.541154] udevadm used greatest stack depth: 6024 bytes left
[ 3.655487] udevd[1007]: starting version 182
[ 4.681116] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 4.993018] intel8x0_measure_ac97_clock: measured 50958 usecs (2456 samples)
[ 4.993023] intel8x0: clocking to 48000
[ 7.401960] EXT4-fs (sda3): re-mounted. Opts: (null
Back to top
View user's profile Send private message
aCOSwt
Bodhisattva
Bodhisattva


Joined: 19 Oct 2007
Posts: 2537
Location: Hilbert space

PostPosted: Wed Jun 06, 2012 4:51 pm    Post subject: Reply with quote

Under kde, issue the following command and post the result :
Code:
# ck-list-sessions

_________________
Back to top
View user's profile Send private message
PhaytalError
n00b
n00b


Joined: 17 May 2012
Posts: 46

PostPosted: Wed Jun 06, 2012 5:05 pm    Post subject: Reply with quote

John,

Hmmmmm, i'm not seeing any USB information in that dmesg output. Did you plugin the device right before you did the dmesg? If no, unplug the device then plug it back in, then show us the USB output of dmesg, if it's NOT showing any usb information then something is wrong, did you compile in (or modulize) USB support in the kernel?
_________________
Linux. Freedom. Power.
Back to top
View user's profile Send private message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Wed Jun 06, 2012 5:54 pm    Post subject: Reply with quote

aCOSwt wrote:
Under kde, issue the following command and post the result :
Code:
# ck-list-sessions

Code:
# ck-list-sessions                                                                             
** Message: Failed to connect to the D-Bus daemon: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory 
Back to top
View user's profile Send private message
aCOSwt
Bodhisattva
Bodhisattva


Joined: 19 Oct 2007
Posts: 2537
Location: Hilbert space

PostPosted: Wed Jun 06, 2012 6:07 pm    Post subject: Reply with quote

john-doe wrote:
aCOSwt wrote:
Under kde, issue the following command and post the result :
Code:
# ck-list-sessions

Code:
# ck-list-sessions                                                                             
** Message: Failed to connect to the D-Bus daemon: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory 

So you get it. That is indeed a good reason for nothing to happen under kde !

- How do you start kde ?
- While kde is running, what does
Code:
# ps -efl | grep dbus
outputs ?
_________________
Back to top
View user's profile Send private message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Wed Jun 06, 2012 7:38 pm    Post subject: Reply with quote

Code:
# ps -efl | grep dbus                                                                         
1 S u         1750     1  0  80   0 -   874 poll_s 09:22 tty1     00:00:00 dbus-launch --autolaunch 3515143f7d780937664ab6150000165a --binary-syntax --close-stderr                                   
1 S u         1751     1  0  80   0 -   735 epoll_ 09:22 ?        00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session                                                     
1 S u         1917     1  0  80   0 -   874 poll_s 09:47 tty1     00:00:00 dbus-launch --sh-syntax --exit-with-session                                                                               
1 S u         1918     1  0  80   0 -   837 -      09:47 ?        00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session                                                     
4 S root      2975  2399  0  80   0 -   605 pipe_w 13:38 pts/0    00:00:00 grep --colour=auto dbus
Back to top
View user's profile Send private message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Wed Jun 06, 2012 7:42 pm    Post subject: Reply with quote

PhaytalError wrote:
did you compile in (or modulize) USB support in the kernel?


nice question!
Back to top
View user's profile Send private message
john-doe
Tux's lil' helper
Tux's lil' helper


Joined: 15 May 2012
Posts: 123

PostPosted: Thu Jun 07, 2012 5:18 pm    Post subject: Reply with quote

deflated the posters?
Back to top
View user's profile Send private message
aCOSwt
Bodhisattva
Bodhisattva


Joined: 19 Oct 2007
Posts: 2537
Location: Hilbert space

PostPosted: Thu Jun 07, 2012 6:25 pm    Post subject: Reply with quote

john-doe wrote:
deflated the posters?

:lol:
Well, not really. We are waiting for you to investigate why you cannot connect to the dbus daemon, which is indeed a starting point for your problem.
_________________
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum