Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[gelöst] Meine Fernbedienung geht nicht mit vdr.
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2908
Location: Bozen

PostPosted: Tue Apr 24, 2012 5:44 am    Post subject: [gelöst] Meine Fernbedienung geht nicht mit vdr. Reply with quote

Also funktionieren tut sie schon, nur nicht mit dem vdr. Und vor einem Jahr ging das schon mal. cat /proc/bus/input/devices gibt folgendes:
    I: Bus=0018 Vendor=0000 Product=0000 Version=0000
    N: Name="i2c IR (HVR 1110)"
    P: Phys=i2c-6/6-0071/ir0
    S: Sysfs=/devices/virtual/rc/rc0/input14
    U: Uniq=
    H: Handlers=kbd event14
    B: PROP=0
    B: EV=100013
    B: KEY=1000000 0 0
    B: MSC=10

Mache ich dann ein cat /dev/input/event14, dann sehe ich auf der Console eine Ausgabe. Trage ich das jetzt in die /etc/conf.d/vdr.remote ein und starte den vdr, dann bekomme ich:
    vdr | * Preparing start of vdr:
    vdr | * Waiting for DVB devices ... [ ok ]
    vdr | * Checking config files ... [ ok ]
    vdr | * Starting vdr ... [ ok ]
    vdr | * Waiting for working vdr ...
    vdr | * timeout. Hoping that VDR is running good nevertheless. [ !! ]
    vdr | * Ignore this if you connected a new remote/keyboard which gets learned.
    vdr | * If your computer is very slow it is possible that vdr
    vdr | * needs more than 40 seconds to be up and going.
    vdr | * You can enlarge that value inside /etc/conf.d/vdr (START_SVDRP_WAIT_SECONDS).
    vdr | * Starting vdr watchdog ...

Im Fenster will vdr dann eine neue Fernbedienung lernen, reagiert aber nicht auf die entsprechende Taste, die aber mit cat /dev/input/event14 eine Ausgabe erzeugt. Genauso, wenn ich die remote.conf lösche. Mit jedem anderen Wert außer 14 startet vdr ohne Mucken, kann dann mit Tastatur bedient werden, aber die Fernbedienung kann dann ja nicht gehen.

dmesg zeigt folgendes:
    Registered IR keymap rc-hauppauge
    input: i2c IR (HVR 1110) as /devices/virtual/rc/rc0/input14
    rc0: i2c IR (HVR 1110) as /devices/virtual/rc/rc0
    ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-6/6-0071/ir0 [saa7133[0]]
    saa7133[0]: registered device video0 [v4l2]
    saa7133[0]: registered device vbi0
    saa7133[0]: registered device radio0
    dvb_init() allocating 1 frontend
    DVB: registering new adapter (saa7133[0])
    DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
    tda1004x: setting up plls for 48MHz sampling clock
    tda1004x: found firmware revision 20 -- ok


Last edited by Klaus Meier on Mon Mar 25, 2013 11:02 am; edited 1 time in total
Back to top
View user's profile Send private message
piewie
Guru
Guru


Joined: 26 Sep 2002
Posts: 489
Location: old Europe

PostPosted: Fri Mar 22, 2013 8:27 pm    Post subject: Reply with quote

Hast Du das Problem mit der FB inzwischen lösen können? Ich glaube aktuell geht der Ansatz über inputlirc und vdr-remote.

evtest /dev/input/event16 (müßte wohl mittels udev fixiert werden, denn inputlircd nimmt kein /proc/input/by-id). evtest sieht bei mit gut aus. Und inputlircd legt mir auch /dev/input/ir an. Mittels cat /dev/input/event16 kann man die Eingabe der FB sehen). /etc/vdr/remove.conf habe ich umbenannt.

Bei vdr --plugin="remote" beschwert sich vdr dann hier aber, daß /dev/input/ir nicht verfügbar wäre (vdr --plugin="remote" ==> /dev/input/ir no such device or address).


Last edited by piewie on Fri Mar 22, 2013 8:33 pm; edited 1 time in total
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2908
Location: Bozen

PostPosted: Fri Mar 22, 2013 8:31 pm    Post subject: Reply with quote

Ja, konnte ich. Das Problem war, dass man ja auch in der remote.conf die Nummer von dem Event eintragen muss. Das hatte ich vergessen.
Back to top
View user's profile Send private message
Randy Andy
Veteran
Veteran


Joined: 19 Jun 2007
Posts: 1148
Location: /dev/koelsch

PostPosted: Mon Mar 25, 2013 9:51 am    Post subject: Reply with quote

Hi Klaus.

Dann könntest Du doch den Thread als gelöst/solved markieren, gelle. :wink:
_________________
If you want to see a Distro done right, compile it yourself!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum