| View previous topic :: View next topic |
| Author |
Message |
HeXiLeD
Veteran
Joined: 20 Aug 2005
Posts: 1159
Location: Online
|
 Posted: Tue Aug 14, 2012 10:42 pm Post subject: Atheros AR242x / AR542x PCI-Express) (rev 01) (SOLVED] |
 |
|
I have been trying to get wireless t work with this card:
| Code: | | Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) |
The gentoo live cd (minimal) detects it and gets it working; however my manual compile does not while it does show the driver is loaded.
The current config can be see here.
lspci -k
| Code: | 01:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-GE780 802.11bg Wireless Mini PCIe Card
Kernel modules: ath5k
|
# lspci -nv
| Code: | 01:00.0 0200: 168c:001c (rev 01)
Subsystem: 1a3b:1026
Flags: fast devsel, IRQ 18
Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Kernel modules: ath5k |
# lsmod
| Code: | Module Size Used by
ath5k 106934 0
ath 10715 1 ath5k
mac80211 179110 1 ath5k
cfg80211 117191 3 ath5k,ath,mac80211
|
Kernel:
| Code: | │ CONFIG_ATH5K:
│
│ This module adds support for wireless adapters based on
│ Atheros 5xxx chipset.
│
│ Currently the following chip versions are supported:
│
│ MAC: AR5211 AR5212
│ PHY: RF5111/2111 RF5112/2112 RF5413/2413
│
│ This driver uses the kernel's mac80211 subsystem.
│
│ If you choose to build a module, it'll be called ath5k. Say M if
│ unsure.
│
│ Symbol: ATH5K [=m]
│ Type : tristate
│ Prompt: Atheros 5xxx wireless cards support
│ Defined at drivers/net/wireless/ath/ath5k/Kconfig:1
│ Depends on: NETDEVICES [=y] && WLAN [=y] && ATH_COMMON [=m] && (PCI [=y] || ATHEROS_AR231X) && MAC80211 [=m]
│ Location:
│ -> Device Drivers
│ -> Network device support (NETDEVICES [=y])
│ -> Wireless LAN (WLAN [=y])
│ -> Atheros Wireless Cards (ATH_COMMON [=m])
│ Selects: MAC80211_LEDS [=y] && LEDS_CLASS [=y] && NEW_LEDS [=y] && AVERAGE [=y] && ATH5K_AHB [=n] && ATH5K_PCI [=y] |
From here i can see that there one dependency that i am not satisfying ATH5K_AHB [=n] which can be the cause for he card not to work.
| Code: | Symbol: ATH5K_AHB [=n]
│ Type : boolean
│ Prompt: Atheros 5xxx AHB bus support
│ Defined at drivers/net/wireless/ath/ath5k/Kconfig:54
│ Depends on: NETDEVICES [=y] && WLAN [=y] && ATH_COMMON [=m] && ATHEROS_AR231X && !PCI [=y]
│ Location:
│ -> Device Drivers
│ -> Network device support (NETDEVICES [=y])
│ -> Wireless LAN (WLAN [=y])
│ -> Atheros Wireless Cards (ATH_COMMON [=m])
│ Selected by: ATH5K [=m] && NETDEVICES [=y] && WLAN [=y] && ATH_COMMON [=m] && (PCI [=y] || ATHEROS_AR231X) && MAC80211 [=m] && ATHEROS_AR231X && !PCI [=y] |
And for some reason i cannot find it or select it. Perhaps it depends on some other option that i have missed.
The chip (1a3b:1026) is supported and in the past it needed madwifi. According to what i have read it does not need it anymore and support should fully by the kernel.
# cat /etc/conf.d/modules
| Code: | | modules="mac80211 cfg80211 ath5k" |
There is also a possible relevant dmesg error:
# dmesg | grep ath
| Code: | ath5k 0000:01:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ath5k: phy0: can't register ieee80211 hw
ath5k: probe of 0000:01:00.0 failed with error -2 |
So .. what am i missing ?
_________________
Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244
Last edited by HeXiLeD on Sat Aug 18, 2012 7:32 pm; edited 1 time in total |
|
| Back to top |
|
 |
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9675
Location: almost Mile High in the USA
|
| Posted: Tue Aug 14, 2012 11:07 pm Post subject: |
|
|
This should be a stable card... I'm using 3.2.21-gentoo currently, will need to update to latest sometime soon.
One thing that I had a lot of trouble with on my eeepc is making sure you have the rfkill compiled as well as eeepc_laptop, also there was some pcie hotplugging support that needs to be added despite not really being able to hotplug on the eeepc.
Try compiling support for these in, and see if it helps.
Summary: I have as well:
rfkill
pcie_hotplug
eeepc_laptop
modules inserted.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
BillWho
Veteran
Joined: 03 Mar 2012
Posts: 1600
Location: US
|
| Posted: Tue Aug 14, 2012 11:53 pm Post subject: |
|
|
HeXiLeD,
I have an Atheros in the laptop - different model, but it looks similar.
| Code: | 09:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Dell Wireless 1702 802.11bgn Half-size Mini PCIe Card [AR9002WB-1NGCD]
Kernel driver in use: ath9k
Kernel modules: ath9k
|
Here's the dmesg output:
| Code: | bill@laptop ~ $ dmesg|grep ath
[ 6.310693] ath: EEPROM regdomain: 0x60
[ 6.310695] ath: EEPROM indicates we should expect a direct regpair map
[ 6.310698] ath: Country alpha2 being used: 00
[ 6.310700] ath: Regpair used: 0x60
[ 6.333879] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.334280] Registered led device: ath9k-phy0
|
You might want to check:
| Code: | bill@laptop /usr/src/linux $ grep 80211 .config|grep "y\|m"
CONFIG_CFG80211=m
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_LEDS=y |
and the card's setting:
| Code: | bill@laptop /usr/src/linux $ grep -i ath9 .config|grep "y\|m"
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
|
_________________
Good luck 
Since installing gentoo, my life has become one long emerge  |
|
| Back to top |
|
|
HeXiLeD
Veteran
Joined: 20 Aug 2005
Posts: 1159
Location: Online
|
| Posted: Sat Aug 18, 2012 7:32 pm Post subject: |
|
|
It was missing the rate control algorithm 'minstrel
' in the kernel. which i though to be broadcom related only.
ieee80211 phy0: Selected rate control algorithm 'minstrel'
# dmesg | grep ath
| Code: | ath5k 0000:01:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
|
| Code: | CONFIG_MAC80211_RC_MINSTREL:
│
│ This option enables the 'minstrel' TX rate control algorithm
│
│ Symbol: MAC80211_RC_MINSTREL [=y]
│ Type : boolean
│ Prompt: Minstrel
│ Defined at net/mac80211/Kconfig:29
│ Depends on: NET [=y] && WIRELESS [=y] && MAC80211 [=m] && EXPER[=y] │
│ Location:
│ -> Networking support (NET [=y])
│ -> Wireless (WIRELESS [=y])
│ Selects: MAC80211_HAS_RC [=y] |
Topic is SOLVED
_________________
Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
| Back to top |
|
|
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9675
Location: almost Mile High in the USA
|
| Posted: Sat Aug 18, 2012 7:56 pm Post subject: |
|
|
Weird...what rate algorithm were you using before? There must have been some rate algorithm installed... were you using the PID or were not using any rate algorithm at all? (I'd call this a menuconfig bug if it let you choose no rate algorithm at all...)
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
HeXiLeD
Veteran
Joined: 20 Aug 2005
Posts: 1159
Location: Online
|
| Posted: Sat Aug 18, 2012 8:04 pm Post subject: |
|
|
I was not using any before. On my other eepcs i had the same selection.
The current config can be see here.
_________________
Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
| Back to top |
|
|
|
Kernel & Hardware
