Bialy
Guru
Joined: 20 Mar 2006
Posts: 486
|
 Posted: Mon Mar 26, 2012 10:54 am Post subject: [SOLVED][ath9k] AR9285 transmituje tylko do 65Mb/s |
 |
|
Tak jak w temacie.
Posiadam kartę AR9285: | Code: | | 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) |
Działa ona w standardzie 'n', jednak transmituje dane tylko do 65Mb/s.
Sterownik jest wykorzystywany przez hostapd: | Code: | interface=wlan0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=Gentoo
country_code=PL
ieee80211d=1
hw_mode=g
channel=11
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
accept_mac_file=/etc/hostapd/hostapd.accept
deny_mac_file=/etc/hostapd/hostapd.deny
auth_algs=1
ignore_broadcast_ssid=0
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
ieee80211n=1
wme_enabled=1
ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=2
wpa_passphrase=K0ch@m_Gent00
wpa_pairwise=CCMP
rsn_pairwise=CCMP |
Stawiając system znalazłem post, że komuś zadziałało 130Mb/s, tylko nie mogę go teraz namierzyć 
Przypuszczam, że to jakiś problem z konfiguracją.
--EDIT--
Poprawiono błędy.
Last edited by Bialy on Thu Apr 12, 2012 11:52 am; edited 1 time in total |
|
Polskie forum (Polish)
