| View previous topic :: View next topic |
| Author |
Message |
goldie83
n00b
Joined: 28 Jun 2008
Posts: 1
|
 Posted: Sat Jun 28, 2008 10:45 am Post subject: sdhci: problems with finding SD card on Toshiba Tecra A9 |
 |
|
Hi. Can't figure out whats wrong with my cardreader on Toshiba Tecra A9.
After insterting a SD-Card no mmcblk device shows up in /dev.
lspci:
| Code: | 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82566MC Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03)
01:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)
04:00.0 Memory controller: Intel Corporation Unknown device 444e (rev 01)
05:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
05:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
05:0b.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
|
uname -a: | Code: | | Linux goldie 2.6.24-gentoo-r4-20080627-02 #1 SMP PREEMPT Fri Jun 27 18:06:28 CEST 2008 i686 Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz GenuineIntel GNU/Linux |
lsmod: | Code: | Module Size Used by
sdhci 18244 0
mmc_block 13188 0
mmc_core 49476 2 sdhci,mmc_block
pcmcia 36632 0
yenta_socket 24652 1
rsrc_nonstatic 10368 1 yenta_socket
pcmcia_core 37336 3 pcmcia,yenta_socket,rsrc_nonstatic
iwl4965 98344 0 |
After modprobe sdhci: | Code: | Jun 28 12:39:13 goldie sdhci: Secure Digital Host Controller Interface driver
Jun 28 12:39:13 goldie sdhci: Copyright(c) Pierre Ossman
Jun 28 12:39:13 goldie sdhci: SDHCI controller found at 0000:05:0b.3 [104c:803c] (rev 0)
Jun 28 12:39:13 goldie sdhci [sdhci_probe()]: found 1 slot(s)
Jun 28 12:39:13 goldie ACPI: PCI Interrupt 0000:05:0b.3[D] -> GSI 23 (level, low) -> IRQ 21
Jun 28 12:39:13 goldie sdhci [sdhci_probe_slot()]: slot 0 at 0x88106000, irq 21
Jun 28 12:39:13 goldie sdhci: ============== REGISTER DUMP ==============
Jun 28 12:39:13 goldie sdhci: Sys addr: 0x00000000 | Version: 0x00008900
Jun 28 12:39:13 goldie sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
Jun 28 12:39:13 goldie sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
Jun 28 12:39:13 goldie sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
Jun 28 12:39:13 goldie sdhci: Power: 0x00000000 | Blk gap: 0x00000000
Jun 28 12:39:13 goldie sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
Jun 28 12:39:13 goldie sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
Jun 28 12:39:13 goldie sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
Jun 28 12:39:13 goldie sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
Jun 28 12:39:13 goldie sdhci: Caps: 0x01e030b0 | Max curr: 0x00000000
Jun 28 12:39:13 goldie sdhci: ===========================================
Jun 28 12:39:13 goldie mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
Jun 28 12:39:13 goldie mmc0: SDHCI at 0x88106000 irq 21 DMA
Jun 28 12:39:13 goldie mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:39:13 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:39:13 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
Jun 28 12:39:13 goldie mmc0: starting CMD0 arg 00000000 flags 000000c0
Jun 28 12:39:13 goldie mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:39:13 goldie mmc0: starting CMD8 arg 000001aa flags 000002f5
Jun 28 12:39:13 goldie mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD5 arg 00000000 flags 000002e1
Jun 28 12:39:13 goldie mmc0: req failed (CMD5): -123, retrying...
Jun 28 12:39:13 goldie mmc0: req failed (CMD5): -123, retrying...
Jun 28 12:39:13 goldie mmc0: req failed (CMD5): -123, retrying...
Jun 28 12:39:13 goldie mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:39:13 goldie mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:39:13 goldie mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:39:13 goldie mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:39:13 goldie mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: starting CMD1 arg 00000000 flags 000000e1
Jun 28 12:39:13 goldie mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
Jun 28 12:39:13 goldie mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 |
After inserting a SD-card: | Code: | Jun 28 12:40:51 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000040
Jun 28 12:40:52 goldie mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:40:52 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:40:52 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
Jun 28 12:40:52 goldie mmc0: starting CMD0 arg 00000000 flags 000000c0
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000001
Jun 28 12:40:52 goldie mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: clock 187500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
Jun 28 12:40:52 goldie mmc0: starting CMD8 arg 000001aa flags 000002f5
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD8): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD5 arg 00000000 flags 000002e1
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req failed (CMD5): -110, retrying...
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req failed (CMD5): -110, retrying...
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req failed (CMD5): -110, retrying...
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD5): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD55): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD55): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD55): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD55 arg 00000000 flags 000000f5
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD55): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: starting CMD1 arg 00000000 flags 000000e1
Jun 28 12:40:52 goldie sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00018000
Jun 28 12:40:52 goldie mmc0: req done (CMD1): -110: 00000000 00000000 00000000 00000000
Jun 28 12:40:52 goldie mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
|
|
|
| Back to top |
|
 |
brightjm
n00b
Joined: 13 Feb 2012
Posts: 8
|
| Posted: Tue Mar 27, 2012 3:41 pm Post subject: Re: sdhci: problems with finding SD card on Toshiba Tecra A9 |
|
|
[quote="goldie83"]Hi. Can't figure out whats wrong with my cardreader on Toshiba Tecra A9.
After insterting a SD-Card no mmcblk device shows up in /dev.
lspci:
I encounter a similar issue. Could you please have a look. Thanks.
The information is as follows:
esdhc: Argument: 0x00000000 | COMMAND: 0x00000000
Core :enter mmc power off1
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
esdhc :enter mmc power off1
Core :enter mmc power off2
mmc0: ESDHC at 0xe002e000 irq 42 DMA
Core Step1:enter mmc power up!
enter mmc host is not !
mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
esdhc: Argument: 0x00000000 | COMMAND: 0x00000000
mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
mmc0: starting CMD0 arg 00000000 flags 000000c0
mmc0: req done (CMD0): -110: 00000000 00000000 00000000 00000000
mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
mmc0: starting CMD8 arg 000001aa flags 000002f5
mmc0: req done (CMD8): -110: 00000000 00000000 00000000 00000000
esdhc: Argument: 0x00000000 | COMMAND: 0x00000000
Core :enter mmc power off1
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
esdhc :enter mmc power off1
Core :enter mmc power off2
mmc0: ESDHC at 0xe002e000 irq 42 DMA
Core Step1:enter mmc power up!
enter mmc host is not !
mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
esdhc: Argument: 0x00000000 | COMMAND: 0x00000000
mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
mmc0: starting CMD0 arg 00000000 flags 000000c0
mmc0: req done (CMD0): -110: 00000000 00000000 00000000 00000000
mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
mmc0: starting CMD8 arg 000001aa flags 000002f5
mmc0: req done (CMD8): -110: 00000000 00000000 00000000 00000000
Core :enter mmc power off1
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
esdhc :enter mmc power off1
Core :enter mmc power off2 |
|
| Back to top |
|
|
Princess Nell
l33t
Joined: 15 Apr 2005
Posts: 916
|
| Posted: Tue Mar 27, 2012 9:19 pm Post subject: |
|
|
| Does your kernel config have CONFIG_SCSI_MULTI_LUN=y ? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
