Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Homemade router... setup....
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 7:15 pm    Post subject: Homemade router... setup.... Reply with quote

using the Homemade router guide, i have it running servers online, only thing thats working is ssh. dhcp is handing out ip's but still the only box able to reach the internet is the server.


To set up eth0 when I ran..rc-update add net.eth0 default it said file not found so I did...

ln -s net.lo /etc/init.d/net.eth0
rc-update add net.eth0 default

resolv

Code:
#Generated by dhcpcd from eth1
# /etc/resolv.conf.head can replace this line
nameserver 66.189.0.100
nameserver 24.159.64.23
nameserver 24.247.24.53
# /etc/resolv.conf.tail can replace this line
Back to top
View user's profile Send private message
John R. Graham
Administrator
Administrator


Joined: 08 Mar 2005
Posts: 10459
Location: Somewhere over Atlanta, Georgia

PostPosted: Mon Jan 30, 2012 10:02 pm    Post subject: Reply with quote

Do you mean the Home Router Guide? Where are you in that? You won't get access to the Internet from other machines until you complete section 5.

- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters.
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 10:07 pm    Post subject: Reply with quote

ive completed the whole thing...

no access
Back to top
View user's profile Send private message
nasaiya
Apprentice
Apprentice


Joined: 17 May 2007
Posts: 152

PostPosted: Mon Jan 30, 2012 10:43 pm    Post subject: Reply with quote

-davros- wrote:
ive completed the whole thing...

no access


Most likely the problem is with your iptables configuration... double check the FORWARD and nat POSTROUTING rules and make sure they are correct. You can see what rules are currently in use with
Code:

# /sbin/iptables -vnL


Stupid as this may sound make sure iptables is actually started... I forgot to start it once a long time ago and it took me a bit to figure out why nothing was working!
_________________
If it ain't broke - fix it till it is!
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 10:54 pm    Post subject: Reply with quote

Ok when its loading net.eth1 and net.eth0

It says... bringing up interface eth1
You are using a bash array for the configur_eth1
This will be removed in the future.
Please see net.example for the correct format for config_eth1

And I just reentered all the iptables and still no access

Let me give the rules a look




Code:
server etc # /sbin/iptables -vnL
Chain INPUT (policy ACCEPT 166 packets, 32434 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           
 1184  101K ACCEPT     all  --  eth0   *       0.0.0.0/0            0.0.0.0/0           
    0     0 REJECT     udp  --  !eth0  *       0.0.0.0/0            0.0.0.0/0            udp dpt:67 reject-with icmp-port-unreachable
    0     0 REJECT     udp  --  !eth0  *       0.0.0.0/0            0.0.0.0/0            udp dpt:53 reject-with icmp-port-unreachable
    0     0 ACCEPT     tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0            tcp dpt:22
    0     0 DROP       tcp  --  !eth0  *       0.0.0.0/0            0.0.0.0/0            tcp dpts:0:1023
  112 37660 DROP       udp  --  !eth0  *       0.0.0.0/0            0.0.0.0/0            udp dpts:0:1023

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
  159 11792 DROP       all  --  eth0   *       0.0.0.0/0            192.168.0.0/16     
 1129  134K ACCEPT     all  --  eth0   *       192.168.0.0/16       0.0.0.0/0           
  718 75251 ACCEPT     all  --  eth1   *       0.0.0.0/0            192.168.0.0/16     

Chain OUTPUT (policy ACCEPT 923 packets, 126K bytes)
 pkts bytes target     prot opt in     out     source               destination         
Back to top
View user's profile Send private message
nasaiya
Apprentice
Apprentice


Joined: 17 May 2007
Posts: 152

PostPosted: Mon Jan 30, 2012 11:04 pm    Post subject: Reply with quote

-davros- wrote:

It says... bringing up interface eth1
You are using a bash array for the configur_eth1
This will be removed in the future.
Please see net.example for the correct format for config_eth1


That just means your /etc/conf.d/net entries are something like this:
Code:
#config_eth0=( "192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" )


The parenthesis make config_eth0 in that case a bash array...
Remove the parenthesis and that should fix it.
_________________
If it ain't broke - fix it till it is!
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 11:15 pm    Post subject: Reply with quote

It will fix the errors or the whole thing?
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7711
Location: Saint Amant, Acadiana

PostPosted: Mon Jan 30, 2012 11:18 pm    Post subject: Reply with quote

What errors, you haven't provided any error messages yet. You are getting a warning telling to fix your config or it will not work in the future.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 11:21 pm    Post subject: Reply with quote

Oh no, no error just the bash array message, which I see is now gone. But wife is home so server is offline ... facebook addict.

I wannted to get this to work before she got home......
Back to top
View user's profile Send private message
nasaiya
Apprentice
Apprentice


Joined: 17 May 2007
Posts: 152

PostPosted: Mon Jan 30, 2012 11:42 pm    Post subject: Reply with quote

You might want to google around for a good iptables example...

I would recommend at least setting the policies on INPUT to drop ( #iptables -P INPUT DROP ) then specifically allow incoming connections that you need, if any. Also you might have more luck with stateful rules.

I'm not sure about the example rules, stateful rules make things much easier I think. In my working configuration I have something like this:

Code:

# flush/clear previous rules
iptables -F FORWARD
# set default policy to DROP
iptables -P FORWARD DROP

# state matching
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -m state --state INVALID -j DROP

# now you only need to allow outgoing because the stateful rules above will take care of necessary incoming packets.
# assuming eth1 is your external WAN interface, this should allow all traffic from your lan (eth0) to reach the WAN (eth1):
iptables -A FORWARD -o eth1 -j ACCEPT

# and of course the NAT rule...
# MASQUERADE traffic going out eth1 (WAN interface)
iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE


You can verify the nat rule is there with
Code:
# iptables -t nat -vnL


Maybe you'll have better luck with that...

Edit: And sorry, I meant fixing /etc/conf.d/net would get rid of the warning about bash arrays, not fix your whole problem...
_________________
If it ain't broke - fix it till it is!
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Tue Jan 31, 2012 12:12 am    Post subject: Reply with quote

Cool I'll try those too after flushing these

Thx

More work tomorrow
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Tue Jan 31, 2012 7:30 pm    Post subject: Reply with quote

Ok with those iptables I still don't gain access to the web.....

Ssh still working....

Pings working also....

Dns problems?

hmmm..... maybe these will work.....

Code:

iptables -A OUTPUT -o eth0 -m state --state ESTABLISHED,RELATED \ -j ACCEPT

iptables -A INPUT -p tcp -i eth1 --dport 22 --sport 1024:65535 \ -m state --state NEW -j ACCEPT
iptables -A INPUT -p tcp -i eth1 --dport 80 --sport 1024:65535 \ -m state --state NEW -j ACCEPT

iptables -A OUTPUT -j ACCEPT -m state \ --state NEW,ESTABLISHED,RELATED -o eth0 -p tcp \ -m multiport --dports 80,443 --sport 1024:65535
iptables -A INPUT -j ACCEPT -m state --state ESTABLISHED,RELATED  \ -i eth0 -p tcp

iptables -A INPUT   -j ACCEPT -p all -s 192.168.0.1/24 -i eth1
iptables -A OUTPUT  -j ACCEPT -p all -d 192.168.0.1/24 -o eth1

iptables -A OUTPUT -p udp -o eth1 --dport 53 --sport 1024:65535 \ -j ACCEPT
 
iptables -A INPUT -p udp -i eth1 --sport 53 --dport 1024:65535 \ -j ACCEPT

iptables -A FORWARD -t filter -o eth1 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -t filter -i eth1 -m state \ --state ESTABLISHED,RELATED -j ACCEPT
 
Back to top
View user's profile Send private message
nasaiya
Apprentice
Apprentice


Joined: 17 May 2007
Posts: 152

PostPosted: Tue Jan 31, 2012 11:22 pm    Post subject: Reply with quote

Well it's hard to say what's going on...

My only other guess would be maybe your routes are incorrect.

I would check the output of the "route" command on your client that can't connect to the internet and see if the default gateway IP is the LAN ip of your server (ie. 192.168.0.1 if you followed that router guide exactly).

If not try restarting the network interface on the client machine to re-obtain settings from the dhcp server
and check the route again.

If that's correct then I'm afraid I'm out of ideas... maybe someone else can help...
_________________
If it ain't broke - fix it till it is!
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Tue Jan 31, 2012 11:26 pm    Post subject: Reply with quote

Odd that I can ping -c 3 www.google.com from a client and it reaches access.
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 15989

PostPosted: Wed Feb 01, 2012 4:06 am    Post subject: Reply with quote

Please provide the output of iptables-save -c ; ip addr ; ip route ; cat /proc/sys/net/ipv4/ip_forward. Please generate a failure via a command line program from an internal machine and post both the command you executed and all of its output.
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Wed Feb 01, 2012 8:38 pm    Post subject: Reply with quote

ok...

iptables-save -c

Code:
iptables-save
# Generated by iptables-save v1.4.12.1 on Wed Feb  1 06:15:20 2012
*nat
:PREROUTING ACCEPT [5767:829091]
:INPUT ACCEPT [201:20189]
:OUTPUT ACCEPT [130:8856]
:POSTROUTING ACCEPT [1:328]
-A POSTROUTING -o eth1 -j MASQUERADE
COMMIT
# Completed on Wed Feb  1 06:15:20 2012
# Generated by iptables-save v1.4.12.1 on Wed Feb  1 06:15:20 2012
*filter
:INPUT ACCEPT [192944:111104442]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [141433:12494979]
:DROPl - [0:0]
:REJECTl - [0:0]
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth0 -j ACCEPT
-A INPUT ! -i eth0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable
-A INPUT ! -i eth0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable
-A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT
-A INPUT ! -i eth0 -p tcp -m tcp --dport 0:1023 -j DROP
-A INPUT ! -i eth0 -p udp -m udp --dport 0:1023 -j DROP
-A INPUT -i eth1 -p udp -m udp --sport 53 --dport 1024:65535 -j ACCEPT
-A FORWARD -d 192.168.0.0/16 -i eth0 -j DROP
-A FORWARD -s 192.168.0.0/16 -i eth0 -j ACCEPT
-A FORWARD -d 192.168.0.0/16 -i eth1 -j ACCEPT
-A OUTPUT -o eth1 -p udp -m udp --sport 1024:65535 --dport 53 -j ACCEPT
COMMIT
# Completed on Wed Feb  1 06:15:20 2012


route (server)


Code:
route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         68-116-192-1.dh 0.0.0.0         UG    1      0        0 eth1
default         68-116-192-1.dh 0.0.0.0         UG    203    0        0 eth1
68-116-192-0.dh *               255.255.252.0   U     203    0        0 eth1
loopback        localhost       255.0.0.0       UG    0      0        0 lo
link-local      *               255.255.0.0     U     202    0        0 eth0
192.168.0.0     *               255.255.255.0   U     0      0        0 eth0


route (client)


Code:
$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 p34p1
192.168.0.0     0.0.0.0         255.255.255.0   U     1      0        0 p34p1
[davros@fedora16 ~]$



iptables -t nat -vnL

Code:
 iptables -t nat -vnL
Chain PREROUTING (policy ACCEPT 5947 packets, 864K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain INPUT (policy ACCEPT 256 packets, 26566 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 178 packets, 11934 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 1 packets, 328 bytes)
 pkts bytes target     prot opt in     out     source               destination         
  432 27166 MASQUERADE  all  --  *      eth1    0.0.0.0/0            0.0.0.0/0   



lsmod

Code:
     lsmod
Module                  Size  Used by
xt_multiport            1574  0
xt_state                1127  0
nf_nat_ftp              1436  0
nf_conntrack_ftp        5309  1 nf_nat_ftp
ipv6                  226721  16
ipt_MASQUERADE          1522  1
iptable_nat             3520  1
nf_nat                 12985  3 nf_nat_ftp,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4       9945  3 iptable_nat,nf_nat
nf_conntrack           48910  7 xt_state,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4          1171  1 nf_conntrack_ipv4
xt_TCPMSS               2903  0
ipt_REJECT              2017  2
xt_tcpudp               2271  7
iptable_filter          1336  1
ip_tables              13777  2 iptable_nat,iptable_filter
x_tables               14191  9 xt_multiport,xt_state,ipt_MASQUERADE,iptable_nat,xt_TCPMSS,ipt_REJECT,xt_tcpudp,iptable_filter,ip_tables
ppdev                   4934  0
parport_pc             27566  0
processor              24495  0
thermal_sys            12594  1 processor
i2c_amd756              4257  0
container               2293  0
button                  4247  0
i2c_amd8111             3717  0
i2c_core               16207  2 i2c_amd756,i2c_amd8111
k8temp                  3075  0
pcspkr                  1699  0
libiscsi               29675  0
scsi_transport_iscsi    30559  1 libiscsi
tg3                   118187  0
libphy                 14435  1 tg3
e1000                  84266  0
fuse                   56106  1
nfs                   134480  0
lockd                  61683  1 nfs
sunrpc                164209  3 nfs,lockd
jfs                   159922  0
zlib_deflate           17856  0
raid10                 22488  0
raid456                42949  0
async_raid6_recov       1209  1 raid456
async_memcpy            1166  1 raid456
async_pq                3051  1 raid456
async_xor               2169  2 raid456,async_pq
xor                     4425  1 async_xor
async_tx                1718  5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor
raid6_pq               77146  2 async_raid6_recov,async_pq
raid1                  21882  0
raid0                   6014  0
dm_snapshot            24138  0
dm_crypt               13663  0
dm_mirror              11350  0
dm_region_hash          6156  1 dm_mirror
dm_log                  7428  2 dm_mirror,dm_region_hash
dm_mod                 57890  4 dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan           695  0
hid_sunplus             1377  0
hid_sony                2496  0
hid_samsung             2822  0
hid_pl                  1297  0
hid_petalynx            1906  0
hid_monterey            1473  0
hid_microsoft           2771  0
hid_logitech            6829  0
hid_gyration            2012  0
hid_ezkey               1306  0
hid_cypress             1810  0
hid_chicony             1689  0
hid_cherry              1441  0
hid_belkin              1606  0
hid_apple               4945  0
hid_a4tech              1884  0
sl811_hcd               8863  0
usbhid                 21739  0
ohci_hcd               19196  0
ssb                    37220  1 ohci_hcd
uhci_hcd               18800  0
usb_storage            40180  0
ehci_hcd               32610  0
usbcore               121430  8 hid_sony,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
usb_common               850  1 usbcore
aic94xx                64512  0
libsas                 45117  1 aic94xx
lpfc                  430390  0
qla2xxx               313370  0
megaraid_sas           66526  0
megaraid_mbox          23998  0
megaraid_mm             6921  1 megaraid_mbox
megaraid               35832  0
aacraid                65674  0
sx8                    11188  0
DAC960                 62036  0
cciss                  43533  0
3w_9xxx                29209  0
3w_xxxx                20771  0
mptsas                 33089  0
scsi_transport_sas     21329  3 aic94xx,libsas,mptsas
mptfc                  10429  0
scsi_transport_fc      36658  3 lpfc,qla2xxx,mptfc
scsi_tgt                8328  1 scsi_transport_fc
mptspi                 11311  0
mptscsih               16717  3 mptsas,mptfc,mptspi
mptbase                54664  4 mptsas,mptfc,mptspi,mptscsih
atp870u                23993  0
dc395x                 26851  0
qla1280                19355  0
imm                     8756  0
parport                25159  3 ppdev,parport_pc,imm
dmx3191d                9044  0
sym53c8xx              63212  0
gdth                   73123  0
advansys               51810  0
initio                 15391  0
BusLogic               19341  0
arcmsr                 23395  0
aic7xxx               106128  0
aic79xx               110288  0
scsi_transport_spi     17592  5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg                     21012  0
pdc_adma                5314  0
sata_inic162x           6378  0
sata_mv                23902  0
ata_piix               20839  0
ahci                   19101  0
libahci                16938  1 ahci
sata_qstor              5081  0
sata_vsc                3934  0
sata_uli                2905  0
sata_sis                3554  0
sata_sx4                8109  0
sata_nv                18295  0
sata_via                7480  0
sata_svw                4094  0
sata_sil24             10108  0
sata_sil                7172  0
sata_promise            9741  0
pata_sl82c105           3539  0
pata_cs5530             4173  0
pata_cs5520             3603  0
pata_via                8241  0
pata_jmicron            2312  0
pata_marvell            2817  0
pata_sis                9996  1 sata_sis
pata_netcell            2110  0
pata_sc1200             2919  0
pata_pdc202xx_old       4307  0
pata_triflex            3085  0
pata_atiixp             3609  0
pata_opti               2687  0
pata_amd                9908  3
pata_ali                8887  0
pata_it8213             3279  0
pata_pcmcia             9685  0
pcmcia                 29388  2 ssb,pata_pcmcia
pcmcia_core            10509  1 pcmcia
pata_ns87415            3193  0
pata_ns87410            2685  0
pata_serverworks        4993  0
pata_artop              4733  0
pata_it821x             8269  0
pata_optidma            4426  0
pata_hpt3x2n            5330  0
pata_hpt3x3             2949  0
pata_hpt37x            10721  0
pata_hpt366             4950  0
pata_cmd64x             5805  0
pata_efar               3395  0
pata_rz1000             2642  0
pata_sil680             4470  0
pata_radisys            2823  0
pata_pdc2027x           6137  0
pata_mpiix              2779  0
libata                137497  52


Last edited by -davros- on Thu Feb 02, 2012 5:29 am; edited 1 time in total
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 15989

PostPosted: Thu Feb 02, 2012 3:47 am    Post subject: Reply with quote

You missed the -c, the ip (twice), the cat command, and the output from the failed command. I do not need iptables -t nat -L, since that is a limited subset of the output of iptables-save. Your lsmod requires an exceptionally wide browser to avoid skewing the thread layout. This is not nice for people with small screens.
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Thu Feb 02, 2012 4:00 am    Post subject: Reply with quote

The iptables-save is iptables-save -c but I will post it again with the -c I thought any ways... ooops

And the ip addr and ip route said ip command not found

As far as the final conman and error I don't understand what you mean by that exactly


Last edited by -davros- on Thu Feb 02, 2012 5:31 am; edited 1 time in total
Back to top
View user's profile Send private message
-davros-
n00b
n00b


Joined: 26 Jan 2012
Posts: 22

PostPosted: Thu Feb 02, 2012 5:05 am    Post subject: Reply with quote

iptables-save -c


Code:
server ~ # iptables-save -c
# Generated by iptables-save v1.4.12.1 on Wed Feb  1 14:49:30 2012
*filter
:INPUT ACCEPT [273967:157731378]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [197270:17318113]
:DROPl - [0:0]
:REJECTl - [0:0]
[48:2912] -A INPUT -i lo -j ACCEPT
[1660:180528] -A INPUT -i eth0 -j ACCEPT
[67:22016] -A INPUT ! -i eth0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable
[0:0] -A INPUT ! -i eth0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable
[29971:1304285] -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT
[0:0] -A INPUT ! -i eth0 -p tcp -m tcp --dport 0:1023 -j DROP
[463:153554] -A INPUT ! -i eth0 -p udp -m udp --dport 0:1023 -j DROP
[287:61823] -A INPUT -i eth1 -p udp -m udp --sport 53 --dport 1024:65535 -j ACCEPT
[0:0] -A FORWARD -d 192.168.0.0/16 -i eth0 -j DROP
[7366:658582] -A FORWARD -s 192.168.0.0/16 -i eth0 -j ACCEPT
[2111:240449] -A FORWARD -d 192.168.0.0/16 -i eth1 -j ACCEPT
[287:18204] -A OUTPUT -o eth1 -p udp -m udp --sport 1024:65535 --dport 53 -j ACCEPT
COMMIT
# Completed on Wed Feb  1 14:49:30 2012
# Generated by iptables-save v1.4.12.1 on Wed Feb  1 14:49:30 2012
*nat
:PREROUTING ACCEPT [15955:1927361]
:INPUT ACCEPT [638:77079]
:OUTPUT ACCEPT [301:20396]
:POSTROUTING ACCEPT [20:1688]
[3051:196706] -A POSTROUTING -o eth1 -j MASQUERADE
COMMIT
# Completed on Wed Feb  1 14:49:30 2012
server ~ #




Code:
cat /proc/sys/net/ipv4/ip_forward
1
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 15989

PostPosted: Fri Feb 03, 2012 3:21 am    Post subject: Reply with quote

-davros- wrote:
And the ip addr and ip route said ip command not found
emerge --noreplace --verbose sys-apps/iproute2
-davros- wrote:
As far as the final conman and error I don't understand what you mean by that exactly
You have some program or set of programs which do not work correctly when used on a machine behind the Gentoo machine. I would like to see the command you use to invoke that program and the error messages it generates, so that I can determine in what way it is failing.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum