Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Installing SUN Sunfire V440, UltraSPARC IIIi, Kernel panic
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc
View previous topic :: View next topic  
Author Message
agkbill
n00b
n00b


Joined: 19 Mar 2010
Posts: 35
Location: Sweden, Uppsala

PostPosted: Thu Jan 05, 2012 5:21 pm    Post subject: Installing SUN Sunfire V440, UltraSPARC IIIi, Kernel panic Reply with quote

Dear Gentoo users,

Would really need some help with this.

I have a SUN Sunfire V440 server that I would like to run Gentoo on, it have two harddrives, 4-port gigabit card + ALOM card.

Problem is kernel panic during boot.

lsmod give:

Code:

/code](chroot) livecd / # lsmod
Module               Size        Used by
openpromfs        4402        1
ipv6                      251651     28
cassini                   42901        0
tg3                      128001     0
libphy                    14143        1 tg3
e1000                     90431        0
fuse                      55272     1
nfs                      257850     0
nfs_acl                    2159        1 nfs
auth_rpcgss               36235     1 nfs
lockd                     63623     1 nfs
sunrpc                   170899     4 nfs,nfs_acl,auth_rpcgss,lockd
raid10                    18939        0
raid456                   47777        0
async_raid6_recov     1081        1 raid456
async_memcpy          734        1 raid456
async_pq                   1700        1 raid456
raid6_pq                  79223     2 async_raid6_recov,async_pq
async_xor                  1169        2 raid456,async_pq
xor                        1441        1 async_xor
async_tx                   1305        5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor
raid1                     17824        0
raid0                      7190        0
md_mod                    89274        4 raid10,raid456,raid1,raid0
dm_snapshot               25281        0
dm_mirror                 11710        0
dm_region_hash         6295        1 dm_mirror
dm_log                     8588        2 dm_mirror,dm_region_hash
dm_mod                    53783        3 dm_snapshot,dm_mirror,dm_log
scsi_wait_scan           631        0
hid_sunplus                1377        0
hid_sony                   2345        0
hid_samsung                2870        0
hid_pl                     1297        0
hid_petalynx               2010        0
hid_monterey               1473        0
hid_microsoft              2699        0
hid_logitech               6299        0
hid_gyration               2028        0
hid_ezkey                  1298        0
hid_cypress                1858        0
hid_chicony                1593        0
hid_cherry                 1417        0
hid_belkin                 1566        0
hid_apple                  4897        0
hid_a4tech                 1956        0
usbhid                    24141        0
ohci_hcd                  17546        0
uhci_hcd                  21078        0
usb_storage               34690     0
usb_libusual              10262        1 usb_storage
ehci_hcd                  32942     0
usbcore                  114941  8 hid_sony,usbhid,ohci_hcd,uhci_hcd,usb_storage,usb_libusual,ehci_hcd
qla2xxx                  305413     0
aic7xxx                  112212     0


lspci

Code:

(chroot) livecd / # lspci
pcilib: Cannot open /proc/bus/pci/0000:00/02.1
lspci: Unable to read the standard configuration space header of device 0000:00:02.1
pcilib: Cannot open /proc/bus/pci/0000:00/0d.0
lspci: Unable to read the standard configuration space header of device 0000:00:0d.0
pcilib: Cannot open /proc/bus/pci/0000:00/0b.0
lspci: Unable to read the standard configuration space header of device 0000:00:0b.0
pcilib: Cannot open /proc/bus/pci/0000:00/0a.0
lspci: Unable to read the standard configuration space header of device 0000:00:0a.0
pcilib: Cannot open /proc/bus/pci/0000:00/06.0
lspci: Unable to read the standard configuration space header of device 0000:00:06.0
pcilib: Cannot open /proc/bus/pci/0000:00/07.0
lspci: Unable to read the standard configuration space header of device 0000:00:07.0
pcilib: Cannot open /proc/bus/pci/0000:03/03.0
lspci: Unable to read the standard configuration space header of device 0000:03:03.0
pcilib: Cannot open /proc/bus/pci/0000:03/02.0
lspci: Unable to read the standard configuration space header of device 0000:03:02.0
pcilib: Cannot open /proc/bus/pci/0000:02/01.0
lspci: Unable to read the standard configuration space header of device 0000:02:01.0
pcilib: Cannot open /proc/bus/pci/0000:02/00.0
lspci: Unable to read the standard configuration space header of device 0000:02:00.0
pcilib: Cannot open /proc/bus/pci/0000:01/04.0
lspci: Unable to read the standard configuration space header of device 0000:01:04.0
pcilib: Cannot open /proc/bus/pci/0000:01/00.0
lspci: Unable to read the standard configuration space header of device 0000:01:00.0
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
00:01.0 SCSI storage controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 14)
00:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
00:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
00:02.0 Ethernet controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 20)
00:02.0 Ethernet controller: Intel Corporation 21154 PCI-to-PCI Bridge (rev 20)
00:02.0 Ethernet controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (rev 20)
00:02.0 Ethernet controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 20)


When I try to boot the built kernel I get.

Code:

Rebooting with command: boot                                         
Boot device: vx-bootdisk  File and args:
SILO Version 1.4.14_git2010228_p1
boot:
Allocated 64 Megs of memory at 0x40000000 for kernel
Loaded kernel version 3.0.6

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:42'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Linux version 3.0.6-gentoo (root@livecd) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1) ) #4 SMP Thu Jan 5 16:32:22 Local
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:ac:56:df
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 132620 bytes of memory.
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/8192
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/8192
[    0.000000] [0000010002000000-fffff80000c00000] page_structs=131072 node=0 entry=8/8192
[    0.000000] [0000010002000000-fffff80001000000] page_structs=131072 node=0 entry=9/8192
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/8192
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/8192
[    0.000000] [0000010006000000-fffff80001c00000] page_structs=131072 node=0 entry=24/8192
[    0.000000] [0000010006000000-fffff80002000000] page_structs=131072 node=0 entry=25/8192
[    0.000000] [0000010020000000-fffff81000400000] page_structs=131072 node=1 entry=128/8192
[    0.000000] [0000010020000000-fffff81000800000] page_structs=131072 node=1 entry=129/8192
[    0.000000] [0000010022000000-fffff81000c00000] page_structs=131072 node=1 entry=136/8192
[    0.000000] [0000010022000000-fffff81001000000] page_structs=131072 node=1 entry=137/8192
[    0.000000] [0000010024000000-fffff81001400000] page_structs=131072 node=1 entry=144/8192
[    0.000000] [0000010024000000-fffff81001800000] page_structs=131072 node=1 entry=145/8192
[    0.000000] [0000010026000000-fffff81001c00000] page_structs=131072 node=1 entry=152/8192
[    0.000000] [0000010026000000-fffff81002000000] page_structs=131072 node=1 entry=153/8192
[    0.000000] [0000010040000000-fffff82000400000] page_structs=131072 node=2 entry=256/8192
[    0.000000] [0000010040000000-fffff82000800000] page_structs=131072 node=2 entry=257/8192
[    0.000000] [0000010042000000-fffff82000c00000] page_structs=131072 node=2 entry=264/8192
[    0.000000] [0000010042000000-fffff82001000000] page_structs=131072 node=2 entry=265/8192
[    0.000000] [0000010044000000-fffff82001400000] page_structs=131072 node=2 entry=272/8192
[    0.000000] [0000010044000000-fffff82001800000] page_structs=131072 node=2 entry=273/8192
[    0.000000] [0000010046000000-fffff82001c00000] page_structs=131072 node=2 entry=280/8192
[    0.000000] [0000010046000000-fffff82002000000] page_structs=131072 node=2 entry=281/8192
[    0.000000] [0000010060000000-fffff83000400000] page_structs=131072 node=3 entry=384/8192
[    0.000000] [0000010060000000-fffff83000800000] page_structs=131072 node=3 entry=385/8192
[    0.000000] [0000010062000000-fffff83000c00000] page_structs=131072 node=3 entry=392/8192
[    0.000000] [0000010062000000-fffff83001000000] page_structs=131072 node=3 entry=393/8192
[    0.000000] [0000010064000000-fffff83001400000] page_structs=131072 node=3 entry=400/8192
[    0.000000] [0000010064000000-fffff83001800000] page_structs=131072 node=3 entry=401/8192
[    0.000000] [0000010066000000-fffff83001c00000] page_structs=131072 node=3 entry=408/8192
[    0.000000] [0000010066000000-fffff83002000000] page_structs=131072 node=3 entry=409/8192
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0199ff5b
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[19] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00080000 -> 0x000a0000
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000]     0: 0x00180000 -> 0x001a0000
[    0.000000]     1: 0x00800000 -> 0x00820000
[    0.000000]     1: 0x00880000 -> 0x008a0000
[    0.000000]     1: 0x00900000 -> 0x00920000
[    0.000000]     1: 0x00980000 -> 0x009a0000
[    0.000000]     2: 0x01000000 -> 0x01020000
[    0.000000]     2: 0x01080000 -> 0x010a0000
[    0.000000]     2: 0x01100000 -> 0x01120000
[    0.000000]     2: 0x01180000 -> 0x011a0000
[    0.000000]     3: 0x01800000 -> 0x01820000
[    0.000000]     3: 0x01880000 -> 0x018a0000
[    0.000000]     3: 0x01900000 -> 0x01920000
[    0.000000]     3: 0x01980000 -> 0x0199f7ff
[    0.000000]     3: 0x0199f800 -> 0x0199ff02
[    0.000000]     3: 0x0199ff0a -> 0x0199ff18
[    0.000000]     3: 0x0199ff58 -> 0x0199ff5b
[    0.000000] Booting Linux...
[    0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[    0.000000] CPU CAPS: [v8plus,vis,vis2]
[    0.000000] PERCPU: Embedded 5 pages/cpu @fffff80002400000 s11200 r8192 d21568 u4194304
[    0.000000] Built 4 zonelists in Node order, mobility grouping on.  Total pages: 2043667
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Memory: 16636912k available (3840k kernel code, 1472k data, 208k init) [fffff80000000000,000000333feb6000]
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[64000000] shift[24]
[    0.000000] clockevent: mult[28f5c29] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:42'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Linux version 3.0.6-gentoo (root@livecd) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1) ) #4 SMP Thu Jan 5 16:32:22 Local
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:ac:56:df
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 132620 bytes of memory.
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/8192
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/8192
[    0.000000] [0000010002000000-fffff80000c00000] page_structs=131072 node=0 entry=8/8192
[    0.000000] [0000010002000000-fffff80001000000] page_structs=131072 node=0 entry=9/8192
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/8192
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/8192
[    0.000000] [0000010006000000-fffff80001c00000] page_structs=131072 node=0 entry=24/8192
[    0.000000] [0000010006000000-fffff80002000000] page_structs=131072 node=0 entry=25/8192
[    0.000000] [0000010020000000-fffff81000400000] page_structs=131072 node=1 entry=128/8192
[    0.000000] [0000010020000000-fffff81000800000] page_structs=131072 node=1 entry=129/8192
[    0.000000] [0000010022000000-fffff81000c00000] page_structs=131072 node=1 entry=136/8192
[    0.000000] [0000010022000000-fffff81001000000] page_structs=131072 node=1 entry=137/8192
[    0.000000] [0000010024000000-fffff81001400000] page_structs=131072 node=1 entry=144/8192
[    0.000000] [0000010024000000-fffff81001800000] page_structs=131072 node=1 entry=145/8192
[    0.000000] [0000010026000000-fffff81001c00000] page_structs=131072 node=1 entry=152/8192
[    0.000000] [0000010026000000-fffff81002000000] page_structs=131072 node=1 entry=153/8192
[    0.000000] [0000010040000000-fffff82000400000] page_structs=131072 node=2 entry=256/8192
[    0.000000] [0000010040000000-fffff82000800000] page_structs=131072 node=2 entry=257/8192
[    0.000000] [0000010042000000-fffff82000c00000] page_structs=131072 node=2 entry=264/8192
[    0.000000] [0000010042000000-fffff82001000000] page_structs=131072 node=2 entry=265/8192
[    0.000000] [0000010044000000-fffff82001400000] page_structs=131072 node=2 entry=272/8192
[    0.000000] [0000010044000000-fffff82001800000] page_structs=131072 node=2 entry=273/8192
[    0.000000] [0000010046000000-fffff82001c00000] page_structs=131072 node=2 entry=280/8192
[    0.000000] [0000010046000000-fffff82002000000] page_structs=131072 node=2 entry=281/8192
[    0.000000] [0000010060000000-fffff83000400000] page_structs=131072 node=3 entry=384/8192
[    0.000000] [0000010060000000-fffff83000800000] page_structs=131072 node=3 entry=385/8192
[    0.000000] [0000010062000000-fffff83000c00000] page_structs=131072 node=3 entry=392/8192
[    0.000000] [0000010062000000-fffff83001000000] page_structs=131072 node=3 entry=393/8192
[    0.000000] [0000010064000000-fffff83001400000] page_structs=131072 node=3 entry=400/8192
[    0.000000] [0000010064000000-fffff83001800000] page_structs=131072 node=3 entry=401/8192
[    0.000000] [0000010066000000-fffff83001c00000] page_structs=131072 node=3 entry=408/8192
[    0.000000] [0000010066000000-fffff83002000000] page_structs=131072 node=3 entry=409/8192
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0199ff5b
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[19] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00080000 -> 0x000a0000
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000]     0: 0x00180000 -> 0x001a0000
[    0.000000]     1: 0x00800000 -> 0x00820000
[    0.000000]     1: 0x00880000 -> 0x008a0000
[    0.000000]     1: 0x00900000 -> 0x00920000
[    0.000000]     1: 0x00980000 -> 0x009a0000
[    0.000000]     2: 0x01000000 -> 0x01020000
[    0.000000]     2: 0x01080000 -> 0x010a0000
[    0.000000]     2: 0x01100000 -> 0x01120000
[    0.000000]     2: 0x01180000 -> 0x011a0000
[    0.000000]     3: 0x01800000 -> 0x01820000
[    0.000000]     3: 0x01880000 -> 0x018a0000
[    0.000000]     3: 0x01900000 -> 0x01920000
[    0.000000]     3: 0x01980000 -> 0x0199f7ff
[    0.000000]     3: 0x0199f800 -> 0x0199ff02
[    0.000000]     3: 0x0199ff0a -> 0x0199ff18
[    0.000000]     3: 0x0199ff58 -> 0x0199ff5b
[    0.000000] Booting Linux...
[    0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[    0.000000] CPU CAPS: [v8plus,vis,vis2]
[    0.000000] PERCPU: Embedded 5 pages/cpu @fffff80002400000 s11200 r8192 d21568 u4194304
[    0.000000] Built 4 zonelists in Node order, mobility grouping on.  Total pages: 2043667
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Memory: 16636912k available (3840k kernel code, 1472k data, 208k init) [fffff80000000000,000000333feb6000]
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[64000000] shift[24]
[    0.000000] clockevent: mult[28f5c29] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[   79.656721] Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=100033)
[   79.656735] pid_max: default: 32768 minimum: 301
[   79.659333] Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
[   79.706517] Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[   79.729624] Mount-cache hash table entries: 512
[   79.730284] Performance events: Supported PMU type is 'ultra3i'
[   79.731815] CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[   79.732907] CPU 1: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[   79.733982] CPU 2: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[   79.734010] Brought up 4 CPUs
[   79.734035] Testing NMI watchdog ... OK.
[   79.935497] NET: Registered protocol family 16
[   79.956472] /pci@1c,600000: TOMATILLO PCI Bus Module ver[4:0]
[   79.956492] /pci@1c,600000: PCI IO[7ce01000000] MEM[7cf00000000]
[   79.958027] PCI: Scanning PBM /pci@1c,600000
[   79.959147] /pci@1d,700000: TOMATILLO PCI Bus Module ver[4:0]
[   79.959162] /pci@1d,700000: PCI IO[7c601000000] MEM[7c700000000]
[   79.960660] PCI: Scanning PBM /pci@1d,700000
[   79.963639] /pci@1e,600000: TOMATILLO PCI Bus Module ver[4:0]
[   79.963662] /pci@1e,600000: PCI IO[7fe01000000] MEM[7ff00000000]
[   79.965162] PCI: Scanning PBM /pci@1e,600000
[   79.965614] pci 0002:00:06.0: quirk: [io  0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI
[   79.965640] pci 0002:00:06.0: quirk: [io  0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB
[   79.967397] /pci@1f,700000: TOMATILLO PCI Bus Module ver[4:0]
[   79.967418] /pci@1f,700000: PCI IO[7f601000000] MEM[7f700000000]
[   79.968925] PCI: Scanning PBM /pci@1f,700000
[   79.980727] bio: create slab <bio-0> at 0
[   79.981590] vgaarb: device added: PCI:0002:00:02.0,decodes=io+mem,owns=mem,locks=none
[   79.981631] vgaarb: loaded
[   79.981641] vgaarb: bridge control possible 0002:00:02.0
[   79.982560] SCSI subsystem initialized
[   79.982885] usbcore: registered new interface driver usbfs
[   79.983031] usbcore: registered new interface driver hub
[   79.983197] usbcore: registered new device driver usb
[   79.984693] /pci@1e,600000/isa@7/rtc@0,70: RTC regs at 0x7fe01000070
[   79.986008] Switching to clocksource stick
[   79.986908] Switched to NOHz mode on CPU #3
[   79.991711] Switched to NOHz mode on CPU #0
[   79.992764] Switched to NOHz mode on CPU #1
[   79.993846] Switched to NOHz mode on CPU #2
[   80.002631] NET: Registered protocol family 2
[   80.003520] IP route cache hash table entries: 524288 (order: 9, 4194304 bytes)
[   80.011647] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[   80.037454] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   80.040638] TCP: Hash tables configured (established 524288 bind 65536)
[   80.040654] TCP reno registered
[   80.040735] UDP hash table entries: 8192 (order: 5, 262144 bytes)
[   80.041581] UDP-Lite hash table entries: 8192 (order: 5, 262144 bytes)
[   80.042949] NET: Registered protocol family 1
[   80.043074] pci 0002:00:07.0: Activating ISA DMA hang workarounds
[   80.043521] power: Control reg at 7fe01000800
[   80.044178] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0
[   80.044216] chmc: UltraSPARC-IIIi memory controller at /memory-controller@1,0
[   80.044249] chmc: UltraSPARC-IIIi memory controller at /memory-controller@2,0
[   80.044281] chmc: UltraSPARC-IIIi memory controller at /memory-controller@3,0
[   80.423007] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   80.424218] msgmni has been set to 32493
[   80.425152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   80.425177] io scheduler noop registered
[   80.425189] io scheduler deadline registered
[   80.425285] io scheduler cfq registered (default)
[   80.425875] radeonfb 0002:00:02.0: BAR 6: can't assign [mem 0x7ff00120000-0x7ff0013ffff] (bogus alignment)
[   80.425898] radeonfb (0002:00:02.0): ROM failed to map
[   80.436066] radeonfb: Retrieved PLL infos from Open Firmware
[   80.436083] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=150.00 Mhz, System=150.00 MHz
[   80.436102] radeonfb: PLL min 12000 max 35000
[   80.577187] i2c i2c-1: unable to read EDID block.
[   80.797178] i2c i2c-1: unable to read EDID block.
[   81.017177] i2c i2c-1: unable to read EDID block.
[   81.237176] i2c i2c-3: unable to read EDID block.
[   81.457360] i2c i2c-3: unable to read EDID block.
[   81.677177] i2c i2c-3: unable to read EDID block.
[   81.897176] i2c i2c-2: unable to read EDID block.
[   82.117174] i2c i2c-2: unable to read EDID block.
[   82.337176] i2c i2c-2: unable to read EDID block.
[   82.557177] i2c i2c-3: unable to read EDID block.
[   82.777176] i2c i2c-3: unable to read EDID block.
[   82.997175] i2c i2c-3: unable to read EDID block.
[   83.176055] radeonfb: Monitor 1 type CRT found
[   83.176067] radeonfb: Monitor 2 type no found
[   83.745744] Console: switching to colour frame buffer device 80x30
[   83.758220] radeonfb (0002:00:02.0): ATI Radeon 5159 "QY"
[   83.763629] f00a75ec: ttyS0 at MMIO 0x7fe010003f8 (irq = 28) is a 16550A
[   83.767406] Console: ttyS0 (SU)
[   96.365850] console [ttyS0] enabled
[   96.415252] f00a9140: ttyS1 at MMIO 0x7fe010002e8 (irq = 28) is a 16550A
[   96.507704] Uniform Multi-Platform E-IDE driver
[   96.571097] alim15x3 0002:00:0d.0: IDE controller (0x10b9:0x5229 rev 0xc4)
[   96.665296] alim15x3 0002:00:0d.0: 100% native mode on irq 32
[   96.744398]     ide0: BM-DMA at 0x7fe01000a20-0x7fe01000a27
[   96.821194] alim15x3 0002:00:0d.0: simplex device: DMA forced
[   96.900354]     ide1: BM-DMA at 0x7fe01000a28-0x7fe01000a2f
[   97.466259] hda: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
[   98.295746] hda: UDMA/33 mode selected
[   98.946273] ide0 at 0x7fe01000a00-0x7fe01000a07,0x7fe01000a1a on irq 32
[   99.037934] ide1 at 0x7fe01000a10-0x7fe01000a17,0x7fe01000a0a on irq 32
[   99.129853] ide-gd driver 1.18
[   99.174697] ide-cd driver 5.00
[   99.255601] ide-cd: hda: ATAPI 24X DVD-ROM drive, 192kB Cache
[   99.336420] cdrom: Uniform CD-ROM driver Revision: 3.20
[  100.942934] sym0: <875> rev 0x14 at pci 0000:00:01.0 irq 6
[  101.107023] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[  101.196431] sym0: SCSI BUS has been reset.
[  101.255815] scsi0 : sym-2.2.3
[  108.678141] sym1: <875> rev 0x14 at pci 0000:00:01.1 irq 7
[  108.842556] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[  108.931916] sym1: SCSI BUS has been reset.
[  108.991241] scsi1 : sym-2.2.3
[  116.339887] sym2: <875> rev 0x14 at pci 0001:00:01.0 irq 15
[  116.505267] sym2: No NVRAM, ID 7, Fast-20, SE, parity checking
[  116.594490] sym2: SCSI BUS has been reset.
[  116.653608] scsi2 : sym-2.2.3
[  124.076116] sym3: <875> rev 0x14 at pci 0001:00:01.1 irq 16
[  124.241268] sym3: No NVRAM, ID 7, Fast-20, SE, parity checking
[  124.330236] sym3: SCSI BUS has been reset.
[  124.389312] scsi3 : sym-2.2.3
[  131.810970] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[  131.917881] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[  132.016101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  132.103121] ohci_hcd 0002:00:0a.0: OHCI Host Controller
[  132.177446] ohci_hcd 0002:00:0a.0: new USB bus registered, assigned bus number 1
[  132.286306] ohci_hcd 0002:00:0a.0: irq 30, io mem 0x7ff01000000
[  132.430601] hub 1-0:1.0: USB hub found
[  132.485719] hub 1-0:1.0: 2 ports detected
[  132.544299] ohci_hcd 0002:00:0b.0: OHCI Host Controller
[  132.618768] ohci_hcd 0002:00:0b.0: new USB bus registered, assigned bus number 2
[  132.727740] ohci_hcd 0002:00:0b.0: irq 31, io mem 0x7ff02000000
[  132.870556] hub 2-0:1.0: USB hub found
[  132.925835] hub 2-0:1.0: 2 ports detected
[  132.985235] mousedev: PS/2 mouse device common for all mice
[  133.066561] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[  133.156272] rtc0: no alarms, 114 bytes nvram
[  133.222990] usbcore: registered new interface driver usbhid
[  133.302538] usbhid: USB HID core driver
[  133.359736] TCP cubic registered
[  133.408281] NET: Registered protocol family 17
[  133.474048] rtc_cmos rtc_cmos: setting system clock to 2012-01-05 16:37:29 UTC (1325781449)
[  133.596852] VFS: Cannot open root device "sda1" or unknown-block(0,0)
[  133.687771] Please append a correct "root=" boot option; here are the available partitions:
[  133.809849] 0300           83184 hda  driver: ide-cdrom
[  133.884713] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[  134.005832] Call Trace:
[  134.005849]  [000000000093cc04] mount_block_root+0x1fc/0x2b0
[  134.005857]  [000000000093ce98] prepare_namespace+0x178/0x1ac
[  134.005863]  [000000000093c8dc] kernel_init+0x11c/0x134
[  134.005876]  [000000000042b3d0] kernel_thread+0x30/0x60
[  134.005888]  [00000000007a49f8] rest_init+0x18/0x80
[  134.005896] Press Stop-A (L1-A) to return to the boot prom


I have built in SYM53C8xx and also emerge sys-block/qla-fc-firmware, and entered it under Device drivers.

Any idea what I might have missed in order to get the kernel to boot OK?

All ideas most welcome.

Best regards,

/Christer
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54611
Location: 56N 3W

PostPosted: Thu Jan 05, 2012 8:40 pm    Post subject: Reply with quote

agkbill,

Fisrt, you appear to have two different SCSI interfaces.
Code:
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
00:01.0 SCSI storage controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 14)

but I don't believe it as they are at the same PCI device address and Cassini 10/100/1000 is an Ethernet port.
Its odd that thay have the same PCU bus, BUs:Device:Function number

Code:
[   97.466259] hda: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
[   98.295746] hda: UDMA/33 mode selected
is a bad sign. Your CDROM shold be sr0.
The Old IDE kernel branch is depreciated and no longer supported by udev. Turn it off.
Code:
< > ATA/ATAPI/MFM/RLL support (DEPRECATED)  --->

Choose your PATA chip set driver from the SATA and PATA menu.
Code:
*> Serial ATA and Parallel ATA drivers  --->
and its submenus.
You also need SCSI CDROM support.
Code:
<*> SCSI CDROM support


SYM53C8xx looks right for you. If you need qla-fc-firmware for your SCSI interface, it must be built into the kernel.
The emerge will install it to /lib/firmware, which is on the root filesystem, where it cannot be read until after root is mounted.
Code:
Look under Generic Driver Options
() External firmware blobs to build into the kernel binary
you can enter a space separated list of firmware files to be included.
I have
Code:
 │ │    [ ]   Include in-kernel firmware blobs in kernel binary       │ │ 
  │ │    (rtl_nic/rtl8168e-2.fw radeon/PALM_pfp.bin radeon/PALM_me.bin │ │ 
  │ │    (/lib/firmware/) Firmware blobs root directory
for my diskless media player.

Code:
[  133.596852] VFS: Cannot open root device "sda1" or unknown-block(0,0)
[  133.687771] Please append a correct "root=" boot option; here are the available partitions:
[  133.809849] 0300           83184 hda  driver: ide-cdrom
[  133.884713] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
confirms its a hard drive device driver issue as no hard drives are listed under
Code:
here are the available partitions


Ypur lsmod from the liveCD is interesting. The only SCSI low level drivers there are
Code:
 qla2xxx                  305413     0
aic7xxx                  112212     0
so clearly one of those is used.

What does
Code:
lspci -k
from the liveCD say?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
agkbill
n00b
n00b


Joined: 19 Mar 2010
Posts: 35
Location: Sweden, Uppsala

PostPosted: Fri Jan 06, 2012 8:38 am    Post subject: Reply with quote

Dear NeddySeagoon,

Thank you for reply,

Before I saw your post I found the thread "Simple answers to simple problems - read before posting", sorry I did not found it earlier.

Well there I could read about (/proc/config.gz), during my work to get my V440 running I had wondered were that info was.

After booting form CD and chroot into new environment I took a look.

It was a very long list of settings. I extracted the Device Drivers part, It looks like, after I removed all entry's not used.

Code:

# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_OF_PROMTREE=y
CONFIG_OF_DEVICE=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=m
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_SUNVDC=y
CONFIG_MISC_DEVICES=y
 Texas Instruments shared transport line discipline
#
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLOGICPTI=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_SUNESP=y
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_VIA=m
# Generic fallback / legacy drivers
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y


I took my time to go throe the list and compare to my settings in Kernel config (make menuconfog).

I found following differences that I changed to the settings from CD config file.

Code:

CONFIG_BLK_DEV_LOOP=y was set to <m>
CONFIG_BLK_DEV_UB=m    was set to <n>
 CONFIG_BLK_DEV_RAM=y   was set to <n>
CONFIG_MISC_DEVICES=y   was set to <n>
CONFIG_BLK_DEV_IDETAPE=m  was set to <n>
CONFIG_BLK_DEV_GENERIC=y   was set to <n>
CONFIG_BLK_DEV_CMD64X=y    was set to <n>
CONFIG_BLK_DEV_HPT366=y     was set to <n>
CONFIG_BLK_DEV_PDC202XX_OLD=y   was set to <n>
CONFIG_BLK_DEV_PDC202XX_NEW=y   was set to <n>
CONFIG_SCSI_SCAN_ASYNC=y            was set to <n>
CONFIG_SCSI_SAS_ATTRS=y               was set to <n>
CONFIG_MEGARAID_SAS=y                  was set to <n>
CONFIG_SCSI_QLOGIC_1280=y            was set to <n>
CONFIG_SCSI_QLOGICPTI=y                was set to <n>
CONFIG_SCSI_QLA_FC=m                    was set to <n>
CONFIG_MD_FAULTY=m                        was set to <n>


After changing all this and compiling new kernel it did boot, wow!

I do not know if all changes make sense for my server, does anyone have comments on the settings?

I will add output from lsmod, lspci -k as soon as I can start up my server again. I will also go thure your comments NeddySeagoon, thank you.

All the best.
/Christer


Last edited by agkbill on Fri Jan 06, 2012 3:47 pm; edited 1 time in total
Back to top
View user's profile Send private message
agkbill
n00b
n00b


Joined: 19 Mar 2010
Posts: 35
Location: Sweden, Uppsala

PostPosted: Fri Jan 06, 2012 3:46 pm    Post subject: Reply with quote

After strugeling with a number of challenges I finaly got my V440 booting!

I do not know it I found the best config (probably not) but it is up and running.

I now have.

lcpci -k

Code:

V440 ~ # lspci -k
0000:00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
        Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
        Kernel driver in use: sym53c8xx
0000:00:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
        Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
        Kernel driver in use: sym53c8xx
0000:00:02.0 Ethernet controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 20)
0001:00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
        Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
        Kernel driver in use: sym53c8xx
0001:00:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
        Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
        Kernel driver in use: sym53c8xx
0001:00:02.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
0001:01:00.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
0001:01:04.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
0001:02:00.0 Ethernet controller: National Semiconductor Corporation DP83065 [Saturn] 10/100/1000 Ethernet Controller (rev 30)
0001:02:01.0 Ethernet controller: National Semiconductor Corporation DP83065 [Saturn] 10/100/1000 Ethernet Controller (rev 30)
0001:03:02.0 Ethernet controller: National Semiconductor Corporation DP83065 [Saturn] 10/100/1000 Ethernet Controller (rev 30)
0001:03:03.0 Ethernet controller: National Semiconductor Corporation DP83065 [Saturn] 10/100/1000 Ethernet Controller (rev 30)
0002:00:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
        Subsystem: ATI Technologies Inc XVR-100 (supplied by Sun)
        Kernel driver in use: radeonfb
0002:00:06.0 Non-VGA unclassified device: ALi Corporation M7101 Power Management Controller [PMU]
0002:00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
0002:00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
        Kernel driver in use: ohci_hcd
0002:00:0b.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
        Kernel driver in use: ohci_hcd
0002:00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
        Kernel driver in use: ALI15x3_IDE
0003:00:01.0 Ethernet controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 20)
0003:00:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
        Subsystem: LSI Logic / Symbios Logic Device 1000
        Kernel driver in use: mptspi
0003:00:02.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
        Subsystem: LSI Logic / Symbios Logic Device 1000
        Kernel driver in use: mptspi
V440 ~ #


lsmod gives:

Code:

V440 ~ # lsmod
Module                  Size  Used by
openpromfs              4826  1
ppp_async               7515  0
ppp_generic            22149  1 ppp_async
slhc                    4739  1 ppp_generic
crc_ccitt               1307  1 ppp_async
sg                     23785  0
V440 ~ #



All boot info look like this.

Code:

Rebooting with command: boot                                         
Boot device: vx-bootdisk  File and args:
SILO Version 1.4.14_git2010228_p1
boot:
Allocated 64 Megs of memory at 0x40000000 for kernel
Loaded kernel version 3.0.6

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:42'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Linux version 3.0.6-gentoo (root@livecd) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1) ) #5 SMP Thu Jan 5 22:21:19 Local time zone must be s
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:ac:56:df
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 132620 bytes of memory.
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/8192
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/8192
[    0.000000] [0000010002000000-fffff80000c00000] page_structs=131072 node=0 entry=8/8192
[    0.000000] [0000010002000000-fffff80001000000] page_structs=131072 node=0 entry=9/8192
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/8192
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/8192
[    0.000000] [0000010006000000-fffff80001c00000] page_structs=131072 node=0 entry=24/8192
[    0.000000] [0000010006000000-fffff80002000000] page_structs=131072 node=0 entry=25/8192
[    0.000000] [0000010020000000-fffff81000400000] page_structs=131072 node=1 entry=128/8192
[    0.000000] [0000010020000000-fffff81000800000] page_structs=131072 node=1 entry=129/8192
[    0.000000] [0000010022000000-fffff81000c00000] page_structs=131072 node=1 entry=136/8192
[    0.000000] [0000010022000000-fffff81001000000] page_structs=131072 node=1 entry=137/8192
[    0.000000] [0000010024000000-fffff81001400000] page_structs=131072 node=1 entry=144/8192
[    0.000000] [0000010024000000-fffff81001800000] page_structs=131072 node=1 entry=145/8192
[    0.000000] [0000010026000000-fffff81001c00000] page_structs=131072 node=1 entry=152/8192
[    0.000000] [0000010026000000-fffff81002000000] page_structs=131072 node=1 entry=153/8192
[    0.000000] [0000010040000000-fffff82000400000] page_structs=131072 node=2 entry=256/8192
[    0.000000] [0000010040000000-fffff82000800000] page_structs=131072 node=2 entry=257/8192
[    0.000000] [0000010042000000-fffff82000c00000] page_structs=131072 node=2 entry=264/8192
[    0.000000] [0000010042000000-fffff82001000000] page_structs=131072 node=2 entry=265/8192
[    0.000000] [0000010044000000-fffff82001400000] page_structs=131072 node=2 entry=272/8192
[    0.000000] [0000010044000000-fffff82001800000] page_structs=131072 node=2 entry=273/8192
[    0.000000] [0000010046000000-fffff82001c00000] page_structs=131072 node=2 entry=280/8192
[    0.000000] [0000010046000000-fffff82002000000] page_structs=131072 node=2 entry=281/8192
[    0.000000] [0000010060000000-fffff83000400000] page_structs=131072 node=3 entry=384/8192
[    0.000000] [0000010060000000-fffff83000800000] page_structs=131072 node=3 entry=385/8192
[    0.000000] [0000010062000000-fffff83000c00000] page_structs=131072 node=3 entry=392/8192
[    0.000000] [0000010062000000-fffff83001000000] page_structs=131072 node=3 entry=393/8192
[    0.000000] [0000010064000000-fffff83001400000] page_structs=131072 node=3 entry=400/8192
[    0.000000] [0000010064000000-fffff83001800000] page_structs=131072 node=3 entry=401/8192
[    0.000000] [0000010066000000-fffff83001c00000] page_structs=131072 node=3 entry=408/8192
[    0.000000] [0000010066000000-fffff83002000000] page_structs=131072 node=3 entry=409/8192
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0199ff5b
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[19] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00080000 -> 0x000a0000
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000]     0: 0x00180000 -> 0x001a0000
[    0.000000]     1: 0x00800000 -> 0x00820000
[    0.000000]     1: 0x00880000 -> 0x008a0000
[    0.000000]     1: 0x00900000 -> 0x00920000
[    0.000000]     1: 0x00980000 -> 0x009a0000
[    0.000000]     2: 0x01000000 -> 0x01020000
[    0.000000]     2: 0x01080000 -> 0x010a0000
[    0.000000]     2: 0x01100000 -> 0x01120000
[    0.000000]     2: 0x01180000 -> 0x011a0000
[    0.000000]     3: 0x01800000 -> 0x01820000
[    0.000000]     3: 0x01880000 -> 0x018a0000
[    0.000000]     3: 0x01900000 -> 0x01920000
[    0.000000]     3: 0x01980000 -> 0x0199f7ff
[    0.000000]     3: 0x0199f800 -> 0x0199ff02
[    0.000000]     3: 0x0199ff0a -> 0x0199ff18
[    0.000000]     3: 0x0199ff58 -> 0x0199ff5b
[    0.000000] Booting Linux...
[    0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[    0.000000] CPU CAPS: [v8plus,vis,vis2]
[    0.000000] PERCPU: Embedded 5 pages/cpu @fffff80002400000 s11200 r8192 d21568 u4194304
[    0.000000] Built 4 zonelists in Node order, mobility grouping on.  Total pages: 2043667
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Memory: 16635928k available (4464k kernel code, 1800k data, 224k init) [fffff80000000000,000000333feb6000]
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[64000000] shift[24]
[    0.000000] clockevent: mult[28f5c29] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:42'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Linux version 3.0.6-gentoo (root@livecd) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1) ) #5 SMP Thu Jan 5 22:21:19 Local time zone must be s
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:ac:56:df
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 132620 bytes of memory.
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/8192
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/8192
[    0.000000] [0000010002000000-fffff80000c00000] page_structs=131072 node=0 entry=8/8192
[    0.000000] [0000010002000000-fffff80001000000] page_structs=131072 node=0 entry=9/8192
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/8192
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/8192
[    0.000000] [0000010006000000-fffff80001c00000] page_structs=131072 node=0 entry=24/8192
[    0.000000] [0000010006000000-fffff80002000000] page_structs=131072 node=0 entry=25/8192
[    0.000000] [0000010020000000-fffff81000400000] page_structs=131072 node=1 entry=128/8192
[    0.000000] [0000010020000000-fffff81000800000] page_structs=131072 node=1 entry=129/8192
[    0.000000] [0000010022000000-fffff81000c00000] page_structs=131072 node=1 entry=136/8192
[    0.000000] [0000010022000000-fffff81001000000] page_structs=131072 node=1 entry=137/8192
[    0.000000] [0000010024000000-fffff81001400000] page_structs=131072 node=1 entry=144/8192
[    0.000000] [0000010024000000-fffff81001800000] page_structs=131072 node=1 entry=145/8192
[    0.000000] [0000010026000000-fffff81001c00000] page_structs=131072 node=1 entry=152/8192
[    0.000000] [0000010026000000-fffff81002000000] page_structs=131072 node=1 entry=153/8192
[    0.000000] [0000010040000000-fffff82000400000] page_structs=131072 node=2 entry=256/8192
[    0.000000] [0000010040000000-fffff82000800000] page_structs=131072 node=2 entry=257/8192
[    0.000000] [0000010042000000-fffff82000c00000] page_structs=131072 node=2 entry=264/8192
[    0.000000] [0000010042000000-fffff82001000000] page_structs=131072 node=2 entry=265/8192
[    0.000000] [0000010044000000-fffff82001400000] page_structs=131072 node=2 entry=272/8192
[    0.000000] [0000010044000000-fffff82001800000] page_structs=131072 node=2 entry=273/8192
[    0.000000] [0000010046000000-fffff82001c00000] page_structs=131072 node=2 entry=280/8192
[    0.000000] [0000010046000000-fffff82002000000] page_structs=131072 node=2 entry=281/8192
[    0.000000] [0000010060000000-fffff83000400000] page_structs=131072 node=3 entry=384/8192
[    0.000000] [0000010060000000-fffff83000800000] page_structs=131072 node=3 entry=385/8192
[    0.000000] [0000010062000000-fffff83000c00000] page_structs=131072 node=3 entry=392/8192
[    0.000000] [0000010062000000-fffff83001000000] page_structs=131072 node=3 entry=393/8192
[    0.000000] [0000010064000000-fffff83001400000] page_structs=131072 node=3 entry=400/8192
[    0.000000] [0000010064000000-fffff83001800000] page_structs=131072 node=3 entry=401/8192
[    0.000000] [0000010066000000-fffff83001c00000] page_structs=131072 node=3 entry=408/8192
[    0.000000] [0000010066000000-fffff83002000000] page_structs=131072 node=3 entry=409/8192
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0199ff5b
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[19] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00080000 -> 0x000a0000
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000]     0: 0x00180000 -> 0x001a0000
[    0.000000]     1: 0x00800000 -> 0x00820000
[    0.000000]     1: 0x00880000 -> 0x008a0000
[    0.000000]     1: 0x00900000 -> 0x00920000
[    0.000000]     1: 0x00980000 -> 0x009a0000
[    0.000000]     2: 0x01000000 -> 0x01020000
[    0.000000]     2: 0x01080000 -> 0x010a0000
[    0.000000]     2: 0x01100000 -> 0x01120000
[    0.000000]     2: 0x01180000 -> 0x011a0000
[    0.000000]     3: 0x01800000 -> 0x01820000
[    0.000000]     3: 0x01880000 -> 0x018a0000
[    0.000000]     3: 0x01900000 -> 0x01920000
[    0.000000]     3: 0x01980000 -> 0x0199f7ff
[    0.000000]     3: 0x0199f800 -> 0x0199ff02
[    0.000000]     3: 0x0199ff0a -> 0x0199ff18
[    0.000000]     3: 0x0199ff58 -> 0x0199ff5b
[    0.000000] Booting Linux...
[    0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[    0.000000] CPU CAPS: [v8plus,vis,vis2]
[    0.000000] PERCPU: Embedded 5 pages/cpu @fffff80002400000 s11200 r8192 d21568 u4194304
[    0.000000] Built 4 zonelists in Node order, mobility grouping on.  Total pages: 2043667
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Memory: 16635928k available (4464k kernel code, 1800k data, 224k init) [fffff80000000000,000000333feb6000]
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[64000000] shift[24]
[    0.000000] clockevent: mult[28f5c29] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[   79.986949] Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=100033)
[   79.986963] pid_max: default: 32768 minimum: 301
[   79.989540] Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
[   80.036720] Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[   80.059802] Mount-cache hash table entries: 512
[   80.060463] Performance events: Supported PMU type is 'ultra3i'
[   80.061975] CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 6 cycles)
[   80.063062] CPU 1: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[   80.064132] CPU 2: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[   80.064163] Brought up 4 CPUs
[   80.064185] Testing NMI watchdog ... OK.
[   80.265657] NET: Registered protocol family 16
[   80.286629] /pci@1c,600000: TOMATILLO PCI Bus Module ver[4:0]
[   80.286649] /pci@1c,600000: PCI IO[7ce01000000] MEM[7cf00000000]
[   80.288184] PCI: Scanning PBM /pci@1c,600000
[   80.289293] /pci@1d,700000: TOMATILLO PCI Bus Module ver[4:0]
[   80.289307] /pci@1d,700000: PCI IO[7c601000000] MEM[7c700000000]
[   80.290801] PCI: Scanning PBM /pci@1d,700000
[   80.293786] /pci@1e,600000: TOMATILLO PCI Bus Module ver[4:0]
[   80.293808] /pci@1e,600000: PCI IO[7fe01000000] MEM[7ff00000000]
[   80.295303] PCI: Scanning PBM /pci@1e,600000
[   80.295752] pci 0002:00:06.0: quirk: [io  0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI
[   80.295777] pci 0002:00:06.0: quirk: [io  0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB
[   80.297517] /pci@1f,700000: TOMATILLO PCI Bus Module ver[4:0]
[   80.297537] /pci@1f,700000: PCI IO[7f601000000] MEM[7f700000000]
[   80.299041] PCI: Scanning PBM /pci@1f,700000
[   80.318977] bio: create slab <bio-0> at 0
[   80.319814] vgaarb: device added: PCI:0002:00:02.0,decodes=io+mem,owns=mem,locks=none
[   80.319856] vgaarb: loaded
[   80.319867] vgaarb: bridge control possible 0002:00:02.0
[   80.320668] SCSI subsystem initialized
[   80.321370] usbcore: registered new interface driver usbfs
[   80.321508] usbcore: registered new interface driver hub
[   80.321671] usbcore: registered new device driver usb
[   80.323186] /pci@1e,600000/isa@7/rtc@0,70: RTC regs at 0x7fe01000070
[   80.324532] Switching to clocksource stick
[   80.327156] Switched to NOHz mode on CPU #3
[   80.331882] Switched to NOHz mode on CPU #0
[   80.332922] Switched to NOHz mode on CPU #1
[   80.333999] Switched to NOHz mode on CPU #2
[   80.341996] NET: Registered protocol family 2
[   80.342889] IP route cache hash table entries: 524288 (order: 9, 4194304 bytes)
[   80.351009] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[   80.376837] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   80.380069] TCP: Hash tables configured (established 524288 bind 65536)
[   80.380086] TCP reno registered
[   80.380166] UDP hash table entries: 8192 (order: 5, 262144 bytes)
[   80.381024] UDP-Lite hash table entries: 8192 (order: 5, 262144 bytes)
[   80.382363] NET: Registered protocol family 1
[   80.382490] pci 0002:00:07.0: Activating ISA DMA hang workarounds
[   80.382940] power: Control reg at 7fe01000800
[   80.383592] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0
[   80.383630] chmc: UltraSPARC-IIIi memory controller at /memory-controller@1,0
[   80.383663] chmc: UltraSPARC-IIIi memory controller at /memory-controller@2,0
[   80.383697] chmc: UltraSPARC-IIIi memory controller at /memory-controller@3,0
[   80.764539] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   80.765827] msgmni has been set to 32492
[   80.766771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   80.766796] io scheduler noop registered
[   80.766808] io scheduler deadline registered
[   80.766903] io scheduler cfq registered (default)
[   80.767511] radeonfb 0002:00:02.0: BAR 6: can't assign [mem 0x7ff00120000-0x7ff0013ffff] (bogus alignment)
[   80.767534] radeonfb (0002:00:02.0): ROM failed to map
[   80.784592] radeonfb: Retrieved PLL infos from Open Firmware
[   80.784608] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=150.00 Mhz, System=150.00 MHz
[   80.784628] radeonfb: PLL min 12000 max 35000
[   80.925707] i2c i2c-1: unable to read EDID block.
[   81.145699] i2c i2c-1: unable to read EDID block.
[   81.365700] i2c i2c-1: unable to read EDID block.
[   81.585699] i2c i2c-3: unable to read EDID block.
[   81.805703] i2c i2c-3: unable to read EDID block.
[   82.025699] i2c i2c-3: unable to read EDID block.
[   82.245697] i2c i2c-2: unable to read EDID block.
[   82.465697] i2c i2c-2: unable to read EDID block.
[   82.685698] i2c i2c-2: unable to read EDID block.
[   82.905697] i2c i2c-3: unable to read EDID block.
[   83.125698] i2c i2c-3: unable to read EDID block.
[   83.345697] i2c i2c-3: unable to read EDID block.
[   83.524576] radeonfb: Monitor 1 type CRT found
[   83.524589] radeonfb: Monitor 2 type no found
[   84.094247] Console: switching to colour frame buffer device 80x30
[   84.106760] radeonfb (0002:00:02.0): ATI Radeon 5159 "QY"
[   84.112252] f00a75ec: ttyS0 at MMIO 0x7fe010003f8 (irq = 28) is a 16550A
[   84.116062] Console: ttyS0 (SU)
[   96.714559] console [ttyS0] enabled
[   96.763998] f00a9140: ttyS1 at MMIO 0x7fe010002e8 (irq = 28) is a 16550A
[   96.862658] brd: module loaded
[   96.909672] loop: module loaded
[   96.954481] Uniform Multi-Platform E-IDE driver
[   97.017601] alim15x3 0002:00:0d.0: IDE controller (0x10b9:0x5229 rev 0xc4)
[   97.111566] alim15x3 0002:00:0d.0: 100% native mode on irq 32
[   97.190573]     ide0: BM-DMA at 0x7fe01000a20-0x7fe01000a27
[   97.267521] alim15x3 0002:00:0d.0: simplex device: DMA forced
[   97.346948]     ide1: BM-DMA at 0x7fe01000a28-0x7fe01000a2f
[   97.844781] hda: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
[   98.671098] hda: UDMA/33 mode selected
[   99.324790] ide0 at 0x7fe01000a00-0x7fe01000a07,0x7fe01000a1a on irq 32
[   99.416601] ide1 at 0x7fe01000a10-0x7fe01000a17,0x7fe01000a0a on irq 32
[   99.509342] ide-gd driver 1.18
[   99.554422] ide-cd driver 5.00
[   99.630885] ide-cd: hda: ATAPI 24X DVD-ROM drive, 192kB Cache
[   99.711962] cdrom: Uniform CD-ROM driver Revision: 3.20
[  101.335526] QLogic Fibre Channel HBA Driver: 8.03.07.03-k
[  101.413255] sym0: <875> rev 0x14 at pci 0000:00:01.0 irq 6
[  101.577507] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[  101.666783] sym0: SCSI BUS has been reset.
[  101.726021] scsi0 : sym-2.2.3
[  101.771903] sym1: <875> rev 0x14 at pci 0000:00:01.1 irq 7
[  101.935893] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[  102.025008] sym1: SCSI BUS has been reset.
[  102.084148] scsi1 : sym-2.2.3
[  102.129820] sym2: <875> rev 0x14 at pci 0001:00:01.0 irq 15
[  102.294979] sym2: No NVRAM, ID 7, Fast-20, SE, parity checking
[  102.384052] sym2: SCSI BUS has been reset.
[  102.443060] scsi2 : sym-2.2.3
[  102.488715] sym3: <875> rev 0x14 at pci 0001:00:01.1 irq 16
[  102.653768] sym3: No NVRAM, ID 7, Fast-20, SE, parity checking
[  102.742680] sym3: SCSI BUS has been reset.
[  102.801658] scsi3 : sym-2.2.3
[  102.846324] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[  102.953004] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[  103.050361] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
[  103.139674] Fusion MPT base driver 3.04.19
[  103.199238] Copyright (c) 1999-2008 LSI Corporation
[  103.269061] Fusion MPT SPI Host driver 3.04.19
[  103.333295] mptbase: ioc0: Initiating bringup
[  104.594599] ioc0: LSI53C1030 B2: Capabilities={Initiator}
[  105.960612] scsi4 : ioc0: LSI53C1030 B2, FwRev=01030b01h, Ports=1, MaxQ=222, IRQ=40
[  106.616481] mptbase: ioc1: Initiating bringup
[  108.854586] ioc1: LSI53C1030 B2: Capabilities={Initiator}
[  110.215754] scsi 4:0:0:0: Direct-Access     SEAGATE  ST373307LC       0007 PQ: 0 ANSI: 3
[  110.219634] scsi5 : ioc1: LSI53C1030 B2, FwRev=01030b01h, Ports=1, MaxQ=222, IRQ=41
[  110.447388] scsi target4:0:0: Beginning Domain Validation
[  110.927588] Fusion MPT FC Host driver 3.04.19
[  110.991407] Fusion MPT SAS Host driver 3.04.19
[  111.056230] Fusion MPT misc device (ioctl) driver 3.04.19
[  111.133683] mptctl: Registered with Fusion MPT base driver
[  111.212041] mptctl: /dev/mptctl @ (major,minor=10,220)
[  111.286313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  111.374008] ohci_hcd 0002:00:0a.0: OHCI Host Controller
[  111.448905] ohci_hcd 0002:00:0a.0: new USB bus registered, assigned bus number 1
[  111.558384] ohci_hcd 0002:00:0a.0: irq 30, io mem 0x7ff01000000
[  111.699031] hub 1-0:1.0: USB hub found
[  111.754319] hub 1-0:1.0: 2 ports detected
[  111.813046] ohci_hcd 0002:00:0b.0: OHCI Host Controller
[  111.887733] ohci_hcd 0002:00:0b.0: new USB bus registered, assigned bus number 2
[  111.997109] ohci_hcd 0002:00:0b.0: irq 31, io mem 0x7ff02000000
[  112.004360] scsi target4:0:0: Ending Domain Validation
[  112.004443] scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[  112.005123] scsi 4:0:1:0: Direct-Access     LSILOGIC 1030 IM       IM 1000 PQ: 0 ANSI: 2
[  112.469006] hub 2-0:1.0: USB hub found
[  112.524251] hub 2-0:1.0: 2 ports detected
[  112.583403] mousedev: PS/2 mouse device common for all mice
[  112.664359] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[  112.753823] rtc0: no alarms, 114 bytes nvram
[  112.820302] usbcore: registered new interface driver usbhid
[  112.899624] usbhid: USB HID core driver
[  112.956622] TCP cubic registered
[  113.004908] NET: Registered protocol family 17
[  113.070441] scsi: waiting for bus probes to complete ...
[  115.271120] scsi 4:1:1:0: Direct-Access     SEAGATE  ST373207LC       0003 PQ: 0 ANSI: 3
[  115.390275] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 1
[  115.470619] mptbase: ioc0:   volume is now degraded, enabled, quiesced
[  115.562344] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=1
[  115.562350] mptbase: ioc0:   PhysDisk is now missing, out of sync, quiesced
[  115.562356] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=1
[  115.562363] mptbase: ioc0:   PhysDisk is now online, quiesced
[  115.562455] scsi target4:1:1: Beginning Domain Validation
[  115.580464] scsi target4:1:1: Ending Domain Validation
[  115.581278] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 1
[  115.581283] mptbase: ioc0:   volume is now degraded, enabled
[  115.581551] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=1
[  115.581555] mptbase: ioc0:   PhysDisk is now missing, out of sync
[  115.581829] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=1
[  115.581833] mptbase: ioc0:   PhysDisk is now online
[  115.582480] scsi target4:1:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[  116.689445] sd 4:0:0:0: [sda] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
[  116.690207] sd 4:0:1:0: [sdb] 143374711 512-byte logical blocks: (73.4 GB/68.3 GiB)
[  116.690475] sd 4:0:1:0: [sdb] Write Protect is off
[  116.690736] sd 4:0:1:0: [sdb] Got wrong page
[  116.690741] sd 4:0:1:0: [sdb] Assuming drive cache: write through
[  116.805766] sd 4:0:1:0: [sdb] Got wrong page
[  116.805771] sd 4:0:1:0: [sdb] Assuming drive cache: write through
[  116.826555]  sdb: sdb3
[  117.314119] rtc_cmos rtc_cmos: setting system clock to 2012-01-06 15:37:50 UTC (1325864270)
[  117.315211] sd 4:0:1:0: [sdb] Got wrong page
[  117.315216] sd 4:0:1:0: [sdb] Assuming drive cache: write through
[  117.315222] sd 4:0:1:0: [sdb] Attached SCSI disk
[  117.649757] sd 4:0:0:0: [sda] Write Protect is off
[  117.720294] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[  117.860116]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[  117.930170] sd 4:0:0:0: [sda] Attached SCSI disk
[  118.049308] VFS: Mounted root (ext2 filesystem) readonly on device 8:1.
INIT: version 2.88 booting

   OpenRC 0.9.4 is starting up Gentoo Linux (sparc64)

 * Mounting /proc ...
 [ ok ]
 * WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection
 * Caching service dependencies ...
 [ ok ]
 * Mounting /sys ...
 [ ok ]
 * Mounting debug filesystem ...
 [ ok ]
 * Mounting /dev ...
 [ ok ]
 * Starting udevd ...
 [ ok ]
 * Populating /dev with existing devices through uevents ...
 [ ok ]
 * Waiting for uevents to be processed ...
 [ ok ]
 * Mounting /dev/pt * Setting system clock using the hardware clock [Local Time] ...
 [ ok ]
 * Loading module ppp_async ...
 [ ok ]
 * Autoloaded 1 module(s)
 * Checking local filesystems  ...
/dev/sda1: clean, 1713/262144 files, 249821/1048576 blocks
/dev/sda4: Superblock last mount time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set)  FIXED.
/dev/sda4: Superblock last write time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set).  FIXED.
/dev/sda4: clean, 224880/524288 files, 1621501/2097152 blocks
/dev/sda5: Superblock last mount time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set)  FIXED.
/dev/sda5: Superblock last write time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set).  FIXED.
/dev/sda5: clean, 4181/524288 files, 118222/2097152 blocks
/dev/sda6: Superblock last mount time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set)  FIXED.
/dev/sda6: Superblock last write time is in the future.
        (by less than a day, probably due to the hardware clock being incorrectly set).  FIXED.
/dev/sda6: clean, 12/4022272 files, 298506/16062018 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
 [ ok ]
 * Updating /etc/mtab ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
 * Creating user login records ...
 [ ok ]
 * Cleaning /var/run ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Setting hostname to V440 ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up interface lo
 *   Caching network module dependencies
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
INIT: Entering runlevel: 3ber gener
 * Bringing up interface eth1
 *   ERROR: interface eth1 does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
 * ERROR: net.eth1 failed to start
 * ERROR: cannot start netmount as net.eth1 would not start
 * Starting syslog-ng ...
 [ ok ]
 * ERROR: cannot start sshd as net.eth1 would not start
 * Doing udev cleanups
 * Starting local
 [ ok ]


This is V440.unknown_domain (Linux sparc64 3.0.6-gentoo) 15:38:00

V440 login: root
Password:
V440 ~ #



My network do not start as it should, that will be next challenge.

Input on how I can improve are most wellcome.

I will use my server for astronomical simulations with GADGET2 so speed and memory use is important.


Thank you!

Best regards,
/Christer
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum