Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Xorg Number of created screens does not match number of ...
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
seba766
n00b
n00b


Joined: 25 Feb 2013
Posts: 14

PostPosted: Tue Jun 11, 2013 12:44 pm    Post subject: Xorg Number of created screens does not match number of ... Reply with quote

Hello everyone,
I have a big trouble with installation Xorg server. If I past
Code:
X -configure

a have message
Code:
number of created screens does not match number of detected devices. configuration failed

after all I run startx and have message
Code:
no screens found(EE)

and my /var/log/xorg shows
Code:
Warning, couldn't open module mga
...
Failed to load module "mga" (module does not exist, 0)


command
Code:
qlist -IC x11-drivers

shows
Code:
x11-drivers/xf86-input-evdev
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-intel


Please don't return to search because I researach 1000 site, and don't have good question for my trouble.
My laptop is samsung n150 with Intel Graphics Media Accelerator (GMA) 3150
Sorry for my english
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 6920

PostPosted: Wed Jun 12, 2013 1:55 am    Post subject: Reply with quote

Can you post the output of "lspci", and "dmesg | grep -i drm"
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Wed Jun 12, 2013 4:24 am    Post subject: Reply with quote

You need KMS in kernel for Intel. Did you turn it on?
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
seba766
n00b
n00b


Joined: 25 Feb 2013
Posts: 14

PostPosted: Wed Jun 12, 2013 9:32 am    Post subject: Reply with quote

Yes I configure my kernel to use KMS. I follow for this instuction
Code:
http://www.gentoo.org/doc/en/xorg-config.xml?style=printable


"dmesg | grep -i drm" show
Code:
Initialized drm 1.1.0 20060810
SUpport vblank timestap caching Rev 1 (10.10.2010)
No driver support for vblank timestap query
Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


Code:
00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Fri Jun 14, 2013 9:09 pm    Post subject: Reply with quote

Have you tried booting with SystemRescueCd, if it works investigate how it does it.

OTOH, you mentioned you tried X -configure, not sure but methinks this command is not compatible with KMS. In fact, this command is obsolete and should not be used with any hardware configuration.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum