| View previous topic :: View next topic |
| Author |
Message |
sebB
l33t
Joined: 02 Mar 2011
Posts: 806
Location: S.O. France
|
 Posted: Fri Nov 04, 2011 8:23 pm Post subject: DVB USB Hauppauge HVR900H kernel 3.0 no channels found |
 |
|
Hello,
Since upgrade from kernel 2.6.38 to 3.0.6 I can't lock channels with DVB-T/USB Hauppauge WinTV HVR 900H .
Same issue with kernel 3.1.0
The modules are loaded, the firmware (xc3028L-v36.fw) is copied to /lib/firmware, the signal is good but I have no channels
With kernel 2.6.38 I've no problems.
dmesg when I plug my key
| Code: | [ 316.615742] tm6000: alt 0, interface 0, class 255
[ 316.615746] tm6000: alt 0, interface 0, class 255
[ 316.615749] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[ 316.615752] tm6000: alt 0, interface 0, class 255
[ 316.615754] tm6000: alt 1, interface 0, class 255
[ 316.615757] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[ 316.615759] tm6000: alt 1, interface 0, class 255
[ 316.615762] tm6000: alt 1, interface 0, class 255
[ 316.615764] tm6000: INT IN endpoint: 0x83 (max size=4 bytes)
[ 316.615767] tm6000: alt 2, interface 0, class 255
[ 316.615769] tm6000: alt 2, interface 0, class 255
[ 316.615771] tm6000: alt 2, interface 0, class 255
[ 316.615774] tm6000: alt 3, interface 0, class 255
[ 316.615776] tm6000: alt 3, interface 0, class 255
[ 316.615778] tm6000: alt 3, interface 0, class 255
[ 316.615781] tm6000: New video device @ 480 Mbps (2040:6600, ifnum 0)
[ 316.615784] tm6000: Found Hauppauge WinTV HVR-900H / WinTV USB2-Stick
[ 316.618489] IR RC6 protocol handler initialized
[ 316.622760] IR JVC protocol handler initialized
[ 316.626209] IR Sony protocol handler initialized
[ 316.630096] Found tm6010
[ 316.634871] lirc_dev: IR Remote Control driver registered, major 250
[ 316.637168] IR LIRC bridge handler initialized
[ 318.830057] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 00 00 40 40 20 00 66 .YTE.......@@ .f
[ 319.150037] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 00 79 00 62 00 72 00 i.. @...H.y.b.r.
[ 319.470033] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ..d.............
[ 319.790047] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 320.110037] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 00 30 00 30 00 48 00 ..H.V.R.9.0.0.H.
[ 320.430038] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 320.750071] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff ff 0a 03 32 00 2e 00 0...........2...
[ 321.070032] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
[ 321.390044] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 321.710037] tm6000 #0: i2c eeprom 90: 32 ff ff ff 16 03 34 00 30 00 33 00 32 00 31 00 2.....4.0.3.2.1.
[ 322.030038] tm6000 #0: i2c eeprom a0: 33 00 34 00 39 00 30 00 32 00 00 00 00 00 ff ff 3.4.9.0.2.......
[ 322.350030] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 322.670031] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 322.990030] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 323.310048] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 323.630045] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 323.930044] ................
[ 323.940666] i2c-core: driver [tuner] using legacy suspend method
[ 323.940670] i2c-core: driver [tuner] using legacy resume method
[ 323.941627] tuner 3-0061: chip found @ 0xc2 (tm6000 #0)
[ 323.964305] xc2028 3-0061: creating new instance
[ 323.964310] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 323.964315] Setting firmware parameters for xc2028
[ 323.967431] xc2028 3-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[ 324.250038] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 448.560044] xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
[ 450.660054] SCODE (20000000), id 000000000000b700:
[ 450.660062] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 452.590177] tm6000 #0: registered device video1
[ 452.590181] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[ 452.590212] usbcore: registered new interface driver tm6000
[ 452.592586] tm6000: open called (dev=video1)
[ 452.613509] tm6000_dvb: module is from the staging directory, the quality is unknown, you have been warned.
[ 452.640081] DVB: registering new adapter (Trident TVMaster 6000 DVB-T)
[ 452.640089] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 452.640322] xc2028 3-0061: attaching existing instance
[ 452.640325] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 452.640328] tm6000: XC2028/3028 asked to be attached to frontend!
[ 452.640440] tm6000 #0: Initialized (TM6000 dvb Extension) extension |
w_scan and kaffeine are unable to find channels although the signal is maximum
The difference between the two kernel is that instead of having
undefined coderate HP or a channel
I've
Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
w_scan kernel 2.6.38
| Quote: | w_scan version 20111011 (compiled for DVB API 5.2)
guessing country 'FR', use -c <country> to override
using settings for FRANCE
DVB aerial
DVB-T FR
frontend_type DVB-T, channellist 5
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Zarlink ZL10353 DVB-T": good 
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.3
frontend 'Zarlink ZL10353 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 02:12)
.
.
.
Scanning 8MHz frequencies...
474000: (time: 02:55) (time: 03:00) signal ok:
QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999
undefined coderate HP
new transponder:
(QAM_64 f = 4294967 kHz I999B8C999D0T8G32Y0)
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
474167: skipped (already known transponder)
473833: skipped (already known transponder)
482000: (time: 03:15)
.
.
.
857833: (time: 17:55)
tune to: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999
(time: 18:01) service = France 2 (GR1)
service = France 5 (GR1)
service = France � (GR1)
service = LCP (GR1)
service = France3 (Nat)
service = (null) ((null))
undefined coderate HP
undefined coderate HP
.
.
.
undefined coderate HP
service = Direct 8 (NTN)
service = BFM TV (NTN)
service = i>TELE (NTN)
service = DirectStar (NTN)
service = Gulli (NTN)
service = France 4 (NTN)
dumping lists (41 services) |
w_scan kernel 3.0.6
| Quote: | w_scan version 20111011 (compiled for DVB API 5.2)
guessing country 'FR', use -c <country> to override
using settings for FRANCE
DVB aerial
DVB-T FR
frontend_type DVB-T, channellist 5
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Zarlink ZL10353 DVB-T": good
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.3
frontend 'Zarlink ZL10353 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:29)
.
.
.
226500: (time: 00:50)
Scanning 8MHz frequencies...
474000: (time: 00:53) (time: 00:54) signal ok:
QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
474167: skipped (already known transponder)
473833: skipped (already known transponder)
482000: (time: 01:09)
.
.
.
858167: (time: 09:36)
857833: (time: 09:39)
tune to: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999
(time: 09:42) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 554000 kHz I999B8C999D999T999G999Y999
(time: 09:57) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 578000 kHz I999B8C999D999T999G999Y999
(time: 10:12) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 602000 kHz I999B8C999D999T999G999Y999
(time: 10:27) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999
(time: 10:41) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 714000 kHz I999B8C999D999T999G999Y999
(time: 10:56) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
dumping lists (0 services) |
log kaffeine kernel 3.0
| Code: | kaffeine(8730) DvbScanfilter::timerEvent: timeout while reading section; type = 0 pid = 0
kaffeine(8730) DvbScanfilter::timerEvent: timeout while reading section; type = 2 pid = 17
kaffeine(8730) DvbDevice::frontendEvent: tuning failed |
Thanks |
|
| Back to top |
|
 |
bjlockie
Veteran
Joined: 18 Oct 2002
Posts: 1186
Location: Canada
|
| Posted: Sat Nov 05, 2011 5:13 pm Post subject: |
|
|
Does your computer have more than 4G of ram?
_________________
AMD FX6100 CPU, 16 GiB RAM, OCZ Vertex 3 SSD
ASRock 970 Extreme3 motherboard with S/PDIF audio
Galaxy-NVidia GeForce 8800GT video card, Cyber Power CP550HG USB UPS |
|
| Back to top |
|
|
bjlockie
Veteran
Joined: 18 Oct 2002
Posts: 1186
Location: Canada
|
| Posted: Sat Nov 05, 2011 5:19 pm Post subject: |
|
|
If you have vlc, try to open your channels.conf or use from the command line.
_________________
AMD FX6100 CPU, 16 GiB RAM, OCZ Vertex 3 SSD
ASRock 970 Extreme3 motherboard with S/PDIF audio
Galaxy-NVidia GeForce 8800GT video card, Cyber Power CP550HG USB UPS |
|
| Back to top |
|
|
sebB
l33t
Joined: 02 Mar 2011
Posts: 806
Location: S.O. France
|
| Posted: Sat Nov 05, 2011 5:50 pm Post subject: |
|
|
| bjlockie wrote: | | Does your computer have more than 4G of ram? |
No I've 4G
mplayer dvb://
| Code: | MPlayer SVN-r33094-4.5.3 (C) 2000-2011 MPlayer Team
Lecture de dvb://
dvb_tune Freq: 554000000
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 4 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 3 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 1 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, return 0 bytes
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 4 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 3 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 1 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, return 0 bytes |
Same think with an other freq
I use the channel.conf generate with kernel 2.6.38
scan with VLC
| Code: | [0x8872b1c] dvb access: Scan ETA 01:01 | 99.107143
[0x8872b1c] dvb access: Scan ETA 00:58 | 99.151786
[0x8872b1c] dvb access: Scan ETA 00:55 | 99.196429
[0x8872b1c] dvb access: Scan ETA 00:52 | 99.241071
[0x8872b1c] dvb access: Scan ETA 00:49 | 99.285714
[0x88557e4] main stream error: cannot pre fill buffer |
It seems that with kernel 2.6.38 the firmware reload automatically
dmesg w-scan kernel 2.6.38
| Code: | [ 775.560383] tm6000: got start feed request tm6000_start_feed
[ 775.560388] tm6000: got start stream request tm6000_start_stream
[ 775.720044] buf 0xf 0xc
[ 775.740535] tm6000: pipe resetted
[ 775.740626] tm6000: got start feed request tm6000_start_feed
[ 775.740649] tm6000: got start feed request tm6000_start_feed
[ 776.590043] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 900.810043] xc2028 3-0061: Loading firmware for type=D2633 DTV6 QAM (70), id 0000000000000000.
[ 902.810042] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[ 910.150042] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 973.510258] tm6000: got stop feed request tm6000_stop_feed
[ 973.510263] stream 0x3
[ 973.510272] tm6000: got stop feed request tm6000_stop_feed
[ 973.510275] stream 0x2
[ 973.510281] tm6000: got stop feed request tm6000_stop_feed
[ 973.510283] stream 0x1
[ 973.510285] stop stream
[ 973.510286] urb killing
[ 973.510458] urb buffer free
[ 1034.570043] xc2028 3-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000.
[ 1036.570041] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[ 1048.900039] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 1173.350070] xc2028 3-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000.
[ 1175.350034] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[ 1305.740038] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 1430.220037] xc2028 3-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000.
[ 1432.220043] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[ 1433.630119] tm6000: got start feed request tm6000_start_feed
[ 1433.630133] tm6000: got start stream request tm6000_start_stream
[ 1433.630523] tm6000: pipe resetted
[ 1433.630555] tm6000: got start feed request tm6000_start_feed
[ 1433.630575] tm6000: got start feed request tm6000_start_feed
[ 1433.664830] tm6000: got stop feed request tm6000_stop_feed
[ 1433.664833] stream 0x3
[ 1433.726612] tm6000: got start feed request tm6000_start_feed
[ 1433.726639] tm6000: got start feed request tm6000_start_feed
[ 1433.726673] tm6000: got start feed request tm6000_start_feed
[ 1433.726695] tm6000: got start feed request tm6000_start_feed
[ 1433.726719] tm6000: got start feed request tm6000_start_feed
[ 1433.726745] tm6000: got start feed request tm6000_start_feed
[ 1433.726749] tm6000: got stop feed request tm6000_stop_feed
[ 1433.726752] stream 0x8
[ 1433.741422] tm6000: got stop feed request tm6000_stop_feed
[ 1433.741426] stream 0x7
[ 1433.761167] tm6000: got stop feed request tm6000_stop_feed
[ 1433.761170] stream 0x6
[ 1433.780916] tm6000: got stop feed request tm6000_stop_feed
[ 1433.780919] stream 0x5
[ 1433.790791] tm6000: got stop feed request tm6000_stop_feed
[ 1433.790794] stream 0x4
[ 1433.810541] tm6000: got stop feed request tm6000_stop_feed
[ 1433.810544] stream 0x3
[ 1433.820417] tm6000: got stop feed request tm6000_stop_feed
[ 1433.820420] stream 0x2
[ 1435.361161] tm6000: got stop feed request tm6000_stop_feed
[ 1435.361165] stream 0x1
[ 1435.361167] stop stream
[ 1435.361169] urb killing
[ 1435.361327] urb buffer free
[ 1435.361383] DVB: adapter 0 frontend 0 frequency 4294967286 out of range (174000000..862000000)
[ 1435.361454] DVB: adapter 0 frontend 0 frequency 4294967286 out of range (174000000..862000000)
[ 1475.450041] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
|
But with kernel 3.0
dmesg w_scan
| Code: | [ 775.560383] tm6000: got start feed request tm6000_start_feed
[ 775.560388] tm6000: got start stream request tm6000_start_stream
[ 775.720044] buf 0xf 0xc
[ 775.740535] tm6000: pipe resetted
[ 775.740626] tm6000: got start feed request tm6000_start_feed
[ 775.740649] tm6000: got start feed request tm6000_start_feed
[ 973.510258] tm6000: got stop feed request tm6000_stop_feed
[ 973.510263] stream 0x3
[ 973.510272] tm6000: got stop feed request tm6000_stop_feed
[ 973.510275] stream 0x2
[ 973.510281] tm6000: got stop feed request tm6000_stop_feed
[ 973.510283] stream 0x1
[ 973.510285] stop stream
[ 973.510286] urb killing
[ 973.510458] urb buffer free
[ 1433.630119] tm6000: got start feed request tm6000_start_feed
[ 1433.630133] tm6000: got start stream request tm6000_start_stream
[ 1433.630523] tm6000: pipe resetted
[ 1433.630555] tm6000: got start feed request tm6000_start_feed
[ 1433.630575] tm6000: got start feed request tm6000_start_feed
[ 1433.664830] tm6000: got stop feed request tm6000_stop_feed
[ 1433.664833] stream 0x3
[ 1433.726612] tm6000: got start feed request tm6000_start_feed
[ 1433.726639] tm6000: got start feed request tm6000_start_feed
[ 1433.726673] tm6000: got start feed request tm6000_start_feed
[ 1433.726695] tm6000: got start feed request tm6000_start_feed
[ 1433.726719] tm6000: got start feed request tm6000_start_feed
[ 1433.726745] tm6000: got start feed request tm6000_start_feed
[ 1433.726749] tm6000: got stop feed request tm6000_stop_feed
[ 1433.726752] stream 0x8
[ 1433.741422] tm6000: got stop feed request tm6000_stop_feed
[ 1433.741426] stream 0x7
[ 1433.761167] tm6000: got stop feed request tm6000_stop_feed
[ 1433.761170] stream 0x6
[ 1433.780916] tm6000: got stop feed request tm6000_stop_feed
[ 1433.780919] stream 0x5
[ 1433.790791] tm6000: got stop feed request tm6000_stop_feed
[ 1433.790794] stream 0x4
[ 1433.810541] tm6000: got stop feed request tm6000_stop_feed
[ 1433.810544] stream 0x3
[ 1433.820417] tm6000: got stop feed request tm6000_stop_feed
[ 1433.820420] stream 0x2
[ 1435.361161] tm6000: got stop feed request tm6000_stop_feed
[ 1435.361165] stream 0x1
[ 1435.361167] stop stream
[ 1435.361169] urb killing
[ 1435.361327] urb buffer free
|
Thanks |
|
| Back to top |
|
|
bjlockie
Veteran
Joined: 18 Oct 2002
Posts: 1186
Location: Canada
|
| Posted: Tue Nov 08, 2011 3:52 am Post subject: |
|
|
It is possible a more recent build of the media infrastructure will fix the problem.
If you know how to recompile the kernel, disable 'Drivers/Multimedia Support' and compile the latest modules.
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
Otherwise, I would just wait for the new kernel.
_________________
AMD FX6100 CPU, 16 GiB RAM, OCZ Vertex 3 SSD
ASRock 970 Extreme3 motherboard with S/PDIF audio
Galaxy-NVidia GeForce 8800GT video card, Cyber Power CP550HG USB UPS |
|
| Back to top |
|
|
sebB
l33t
Joined: 02 Mar 2011
Posts: 806
Location: S.O. France
|
| Posted: Tue Nov 08, 2011 8:43 pm Post subject: |
|
|
I've try with the git version of v4l but it don't work.
I've a Fatal Error when I modprobe tm6000.
That's strange because when I do tzap -c channels.conf TF1 in kernel 3.0.6
| Code: | using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file 'channels.conf'
tuning to 554000000 Hz
video pid 0x0078, audio pid 0x0082
status 00 | signal ac00 | snr 0000 | ber 00000000 | unc 00000000 |
status 1e | signal 9a18 | snr b9b9 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1e | signal 9a10 | snr bbbb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1e | signal 9a34 | snr b7b7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1e | signal 9a50 | snr b9b9 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1e | signal 9a58 | snr b9b9 | ber 00000020 | unc 00000000 | FE_HAS_LOCK
status 1e | signal 9a94 | snr b9b9 | ber 00000020 | unc 00000000 | FE_HAS_LOCK |
It means that The signal is found.
I've try with a live-cd ubuntu 11.04 (kernel 2.6.38) and it works
With ubuntu 11.10 (kernel 3.0) same results that gentoo i.e unable to lock channels.
I suppose, I can exclude my kernel config.
EDIT: With the git kernel source download from v4l same result
I've post a bug #389827 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
