| View previous topic :: View next topic |
| Author |
Message |
Crimjob
Tux's lil' helper
Joined: 04 Dec 2006
Posts: 111
|
 Posted: Wed Nov 02, 2011 2:25 pm Post subject: econf failed & failed to run configure after GCC 4.5 upg |
 |
|
Hey Guys,
I think I broke my GCC 
I followed the Gentoo GCC upgrade guide and things were going well. I was able to update my system, but upon starting revdep-rebuild, everything went down hill. I was unable to build most of the packages revdep-rebuild wanted due to GCC errors. I've even tried re-emerging GCC but I'm getting errors with that.
Where's the best place to start troubleshooting this? What can I do to revive my GCC?
| Code: |
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/dev-libs/mpfr-3.0.1_p4/work/mpfr-3.0.1':
configure: error: C compiler cannot create executables
* ERROR: dev-libs/mpfr-3.0.1_p4 failed (compile phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 2135: Called _eapi0_src_compile
* ebuild.sh, line 627: Called econf
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
|
I did manage to get one config.log for mpfr
| Code: | checking for C compiler default output file name...
configure: error: in `/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build':
configure: error: C compiler cannot create executables
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* failed to run configure
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4549: Called toolchain_src_compile
* environment, line 5245: Called gcc_do_configure
* environment, line 2630: Called die
* The specific snippet of code:
* "${S}"/configure "$@" || die "failed to run configure";
|
_________________
"Who are you to judge the life I live? I know I'm not perfect and I don't live to be, but before you start pointing fingers... make sure your hands are clean." ~Bob Marley
Last edited by Crimjob on Thu Mar 28, 2013 11:43 pm; edited 1 time in total |
|
| Back to top |
|
 |
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10789
Location: Somewhere over Atlanta, Georgia
|
| Posted: Wed Nov 02, 2011 2:27 pm Post subject: |
|
|
What doesreport?
- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters. |
|
| Back to top |
|
|
Crimjob
Tux's lil' helper
Joined: 04 Dec 2006
Posts: 111
|
| Posted: Wed Nov 02, 2011 2:35 pm Post subject: |
|
|
Thanks for the quick response!
| Code: | Zeppelin ~ # gcc-config -l
[1] i686-pc-linux-gnu-4.5.3
[2] i686-pc-linux-gnu-4.5.3-hardenednopie *
[3] i686-pc-linux-gnu-4.5.3-hardenednopiessp
[4] i686-pc-linux-gnu-4.5.3-hardenednossp
[5] i686-pc-linux-gnu-4.5.3-vanilla
|
I briefly attempted profile 1 but was warned of a bug.
_________________
"Who are you to judge the life I live? I know I'm not perfect and I don't live to be, but before you start pointing fingers... make sure your hands are clean." ~Bob Marley |
|
| Back to top |
|
|
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10789
Location: Somewhere over Atlanta, Georgia
|
| Posted: Wed Nov 02, 2011 2:37 pm Post subject: |
|
|
Hmm. Output ofplease.
- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters. |
|
| Back to top |
|
|
Crimjob
Tux's lil' helper
Joined: 04 Dec 2006
Posts: 111
|
| Posted: Wed Nov 02, 2011 2:49 pm Post subject: |
|
|
| Code: | Portage 2.1.10.11 (hardened/linux/x86, gcc-4.5.3-hardenednopie, glibc-2.12.2-r0, 3.0.4-hardened-r4 i686)
=================================================================
System uname: Linux-3.0.4-hardened-r4-i686-Intel-R-_Pentium-R-_4_CPU_3.00GHz-with-gentoo-2.0.3
Timestamp of tree: Wed, 02 Nov 2011 06:15:01 +0000
ccache version 2.4 [disabled]
app-shells/bash: 4.1_p9::<unknown repository>
dev-lang/python: 2.6.6-r2::<unknown repository>, 2.7.2-r3, 3.1.4-r3
dev-util/ccache: 2.4-r9
dev-util/cmake: 2.8.4-r1
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.0.3
sys-apps/openrc: 0.8.3-r1
sys-apps/sandbox: 2.4::<unknown repository>
sys-devel/autoconf: 2.68
sys-devel/automake: 1.11.1
sys-devel/binutils: 2.20.1-r1
sys-devel/gcc: 4.5.3-r1
sys-devel/gcc-config: 1.4.1-r1
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 2.6.39 (virtual/os-headers)
sys-libs/glibc: 2.12.2
Repositories: gentoo
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /var/bind"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/cli-php5.3/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="ftp://mirrors.tera-byte.com/pub/gentoo http://gentoo.mirrors.tera-byte.com/ ftp://gentoo.arcticnetwork.ca/pub/gentoo/ http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ http://gentoo.arcticnetwork.ca/ ftp://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ "
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="acl apache2 berkdb bzip2 cli cracklib crypt cups cxx diskio dri gdbm gpm hardened iconv imap libwww maildir modules mudflap mysql ncurses nls nptl nptlonly openmp pam pax_kernel pcre perl pic pppd python readline sasl session snmp sockets ssl sysfs tcpd urandom vhosts x86 xml xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias proxy scgi" CALLIGRA_FEATURES="kexi words flow plan stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint i128 i740 intel mach64 mga neomagic nsc nv r128 radeon rendition s3 s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa via vmware nouveau" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
_________________
"Who are you to judge the life I live? I know I'm not perfect and I don't live to be, but before you start pointing fingers... make sure your hands are clean." ~Bob Marley |
|
| Back to top |
|
|
Crimjob
Tux's lil' helper
Joined: 04 Dec 2006
Posts: 111
|
| Posted: Thu Nov 03, 2011 1:50 pm Post subject: |
|
|
Now I'm starting to get worried. Hacking together some other suggestions on the net I came up with a bit of a re-install of GCC, but to no avail, I still get the same errors when trying to emerge.
| Code: | Zeppelin / # mkdir /gccfix
Zeppelin / # cd /gccfix/
Zeppelin gccfix # wget http://gentoo.mirrors.tds.net/gentoo/releases/x86/current-stage3/stage3-i686-20111101.tar.bz2
...
Zeppelin gccfix # tar -xvjpf stage3-i686-20111101.tar.bz2
...
Zeppelin gccfix # chroot /gccfix
Zeppelin / # quickpkg sys-devel/gcc
* Building package for sys-devel/gcc-4.5.3-r1 ... [ ok ]
* Packages now in '/usr/portage/packages':
* sys-devel/gcc-4.5.3-r1: 18.7M
Zeppelin / # exit
exit
Zeppelin gccfix # mkdir /usr/portage/packages
Zeppelin gccfix # mv /gccfix/usr/portage/packages/* /usr/portage/packages/
Zeppelin gccfix # cd /
Zeppelin / # tar -xvjpf /usr/portage/packages/sys-devel/gcc-4.5.3-r1.tbz2
...
Zeppelin / # gcc-config -l
[1] i686-pc-linux-gnu-4.5.3
[2] i686-pc-linux-gnu-4.5.3-hardenednopie *
[3] i686-pc-linux-gnu-4.5.3-hardenednopiessp
[4] i686-pc-linux-gnu-4.5.3-hardenednossp
[5] i686-pc-linux-gnu-4.5.3-vanilla
Zeppelin / # gcc-config 1
* Switching native-compiler to i686-pc-linux-gnu-4.5.3 ...
>>> Regenerating /etc/ld.so.cache... [ ok ]
* If you intend to use the gcc from the new profile in an already
* running shell, please remember to do:
* . /etc/profile
Zeppelin / # env-update && source /etc/profile
>>> Regenerating /etc/ld.so.cache...
Zeppelin / # emerge -av --oneshot libtool binutils
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] sys-devel/libtool-2.4-r1 USE="-test -vanilla" 0 kB
[ebuild R ] sys-devel/binutils-2.20.1-r1 USE="nls -multislot -multitarget -static-libs -test -vanilla" 0 kB
Total: 2 packages (2 reinstalls), Size of downloads: 0 kB
Would you like to merge these packages? [Yes/No] y
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 2) sys-devel/libtool-2.4-r1
* libtool-2.4.tar.xz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking ./libtool-2.4.tar to /var/tmp/portage/sys-devel/libtool-2.4-r1/work
>>> Source unpacked in /var/tmp/portage/sys-devel/libtool-2.4-r1/work
>>> Preparing source in /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4 ...
* Removing useless C++ checks ... [ ok ]
* Applying libtool-1.5.20-use-linux-version-in-fbsd.patch ... [ ok ]
* Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl' ...
* Running aclocal -I m4 ... [ ok ]
* Running true --copy --force --install --automake ... [ ok ]
* Running aclocal -I m4 ... [ ok ]
* Running autoconf ... [ ok ]
* Running autoheader ... [ ok ]
* Running automake --add-missing --copy --foreign ... [ ok ]
* Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4' ...
* Running aclocal -I libltdl/m4 ... [ ok ]
* Running true --copy --force --install --automake ... [ ok ]
* Running aclocal -I libltdl/m4 ... [ ok ]
* Running autoconf ... [ ok ]
* Running autoheader ... [ ok ]
* Running automake --add-missing --copy ... [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4 ...
* econf: updating libtool-2.4/libltdl/config/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating libtool-2.4/libltdl/config/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib
## ----------------------- ##
## Configuring libtool 2.4 ##
## ----------------------- ##
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
configure: autobuild project... GNU Libtool
configure: autobuild revision... 2.4 ()
configure: autobuild hostname... Zeppelin
configure: autobuild mode... default
configure: autobuild timestamp... 20111103T134411Z
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/config.log
* ERROR: sys-devel/libtool-2.4-r1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2760: Called default
* ebuild.sh, line 1623: Called _eapi2_src_configure
* ebuild.sh, line 663: Called econf
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =sys-devel/libtool-2.4-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/libtool-2.4-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4'
>>> Failed to emerge sys-devel/libtool-2.4-r1, Log file:
>>> '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log'
* Messages for package sys-devel/libtool-2.4-r1:
* ERROR: sys-devel/libtool-2.4-r1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2760: Called default
* ebuild.sh, line 1623: Called _eapi2_src_configure
* ebuild.sh, line 663: Called econf
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =sys-devel/libtool-2.4-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/libtool-2.4-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4'
|
_________________
"Who are you to judge the life I live? I know I'm not perfect and I don't live to be, but before you start pointing fingers... make sure your hands are clean." ~Bob Marley |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
