Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Xorg - screen stays black
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Svenwie
n00b
n00b


Joined: 30 Sep 2003
Posts: 9

PostPosted: Fri Oct 21, 2011 5:30 am    Post subject: [SOLVED] Xorg - screen stays black Reply with quote

Hi there,

I've just setup a new system and trying to get this ******* X server to work.
I'm trying for 2 days now to get anything on the screen, but it stays just black after I've issued startx.

When I was installing my last machine with a GeForce, I remember I was using the nvidia driver some years
ago, but this time I've learned, that the nouveau is the new standard for NVidia Boards, right ?

Anyway - I couldn't get any of them to work. Do you guys have any ideas, why this screen stays black ?
Honestly - after reading the logs again and again, I don't see anything anymore in it ...


Here is some data :

Code:

ICA1SERV001 ~ # lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce 6150 LE] (rev a2)


Here is the Xorg.0.log without any manual configuration :

Code:

[    22.263]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    22.263] X Protocol Version 11, Revision 0
[    22.263] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
[    22.263] Current Operating System: Linux ICA1SERV001 3.0.6-gentoo #9 SMP Thu Oct 20 02:49:00 EDT 2011 x86_64
[    22.263] Kernel command line: root=/dev/sda3
[    22.263] Build Date: 19 October 2011  07:10:06PM
[    22.264]
[    22.264] Current version of pixman: 0.22.2
[    22.264]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    22.264] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.264] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 02:57:34 2011
[    22.377] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.391] (==) No Layout section.  Using the first Screen section.
[    22.391] (==) No screen section available. Using defaults.
[    22.391] (**) |-->Screen "Default Screen Section" (0)
[    22.391] (**) |   |-->Monitor "<default monitor>"
[    22.391] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    22.391] (==) Automatically adding devices
[    22.391] (==) Automatically enabling devices
[    22.426] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    22.426]    Entry deleted from font path.
[    22.426] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    22.426]    Entry deleted from font path.
[    22.426] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    22.426]    Entry deleted from font path.
[    22.427] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[    22.427] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    22.427] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.427] (II) Loader magic: 0x7d3160
[    22.427] (II) Module ABI versions:
[    22.427]    X.Org ANSI C Emulation: 0.4
[    22.427]    X.Org Video Driver: 10.0
[    22.427]    X.Org XInput driver : 12.2
[    22.427]    X.Org Server Extension : 5.0
[    22.428] (--) PCI:*(0:0:5:0) 10de:0241:1028:01ec rev 162, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    22.428] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    22.428] (II) LoadModule: "extmod"
[    22.518] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    22.536] (II) Module extmod: vendor="X.Org Foundation"
[    22.536]    compiled for 1.10.4, module version = 1.0.0
[    22.536]    Module class: X.Org Server Extension
[    22.536]    ABI class: X.Org Server Extension, version 5.0
[    22.536] (II) Loading extension MIT-SCREEN-SAVER
[    22.536] (II) Loading extension XFree86-VidModeExtension
[    22.536] (II) Loading extension XFree86-DGA
[    22.536] (II) Loading extension DPMS
[    22.536] (II) Loading extension XVideo
[    22.536] (II) Loading extension XVideo-MotionCompensation
[    22.536] (II) Loading extension X-Resource
[    22.536] (II) LoadModule: "dbe"
[    22.536] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    22.536] (II) Module dbe: vendor="X.Org Foundation"
[    22.536]    compiled for 1.10.4, module version = 1.0.0
[    22.536]    Module class: X.Org Server Extension
[    22.536]    ABI class: X.Org Server Extension, version 5.0
[    22.536] (II) Loading extension DOUBLE-BUFFER
[    22.536] (II) LoadModule: "glx"
[    22.537] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    22.543] (II) Module glx: vendor="X.Org Foundation"
[    22.543]    compiled for 1.10.4, module version = 1.0.0
[    22.543]    ABI class: X.Org Server Extension, version 5.0
[    22.543] (==) AIGLX enabled
[    22.543] (II) Loading extension GLX
[    22.543] (II) LoadModule: "record"
[    22.544] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    22.547] (II) Module record: vendor="X.Org Foundation"
[    22.547]    compiled for 1.10.4, module version = 1.13.0
[    22.547]    Module class: X.Org Server Extension
[    22.547]    ABI class: X.Org Server Extension, version 5.0
[    22.547] (II) Loading extension RECORD
[    22.547] (II) LoadModule: "dri"
[    22.547] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    22.564] (II) Module dri: vendor="X.Org Foundation"
[    22.564]    compiled for 1.10.4, module version = 1.0.0
[    22.564]    ABI class: X.Org Server Extension, version 5.0
[    22.564] (II) Loading extension XFree86-DRI
[    22.564] (II) LoadModule: "dri2"
[    22.564] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    22.564] (II) Module dri2: vendor="X.Org Foundation"
[    22.564]    compiled for 1.10.4, module version = 1.2.0
[    22.564]    ABI class: X.Org Server Extension, version 5.0
[    22.564] (II) Loading extension DRI2
[    22.564] (==) Matched nouveau as autoconfigured driver 0
[    22.564] (==) Matched vesa as autoconfigured driver 1
[    22.564] (==) Matched fbdev as autoconfigured driver 2
[    22.564] (==) Assigned the driver to the xf86ConfigLayout
[    22.565] (II) LoadModule: "nouveau"
[    22.585] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    22.611] (II) Module nouveau: vendor="X.Org Foundation"
[    22.611]    compiled for 1.10.4, module version = 0.0.16
[    22.611]    Module class: X.Org Video Driver
[    22.611]    ABI class: X.Org Video Driver, version 10.0
[    22.611] (II) LoadModule: "vesa"
[    22.612] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    22.622] (II) Module vesa: vendor="X.Org Foundation"
[    22.622]    compiled for 1.10.4, module version = 2.3.0
[    22.622]    Module class: X.Org Video Driver
[    22.622]    ABI class: X.Org Video Driver, version 10.0
[    22.622] (II) LoadModule: "fbdev"
[    22.622] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    22.627] (II) Module fbdev: vendor="X.Org Foundation"
[    22.627]    compiled for 1.10.4, module version = 0.4.2
[    22.627]    ABI class: X.Org Video Driver, version 10.0
[    22.627] (II) NOUVEAU driver
[    22.627] (II) NOUVEAU driver for NVIDIA chipset families :
[    22.627]    RIVA TNT        (NV04)
[    22.627]    RIVA TNT2       (NV05)
[    22.627]    GeForce 256     (NV10)
[    22.627]    GeForce 2       (NV11, NV15)
[    22.627]    GeForce 4MX     (NV17, NV18)
[    22.627]    GeForce 3       (NV20)
[    22.627]    GeForce 4Ti     (NV25, NV28)
[    22.627]    GeForce FX      (NV3x)
[    22.627]    GeForce 6       (NV4x)
[    22.627]    GeForce 7       (G7x)
[    22.627]    GeForce 8       (G8x)
[    22.627]    GeForce GTX 200 (NVA0)
[    22.627]    GeForce GTX 400 (NVC0)
[    22.627] (II) VESA: driver for VESA chipsets: vesa
[    22.628] (II) FBDEV: driver for framebuffer: fbdev
[    22.628] (--) using VT number 7

[    22.636] drmOpenDevice: node name is /dev/dri/card0
[    22.636] drmOpenDevice: open result is 7, (OK)
[    22.636] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[    22.636] drmOpenDevice: node name is /dev/dri/card0
[    22.636] drmOpenDevice: open result is 7, (OK)
[    22.636] drmOpenByBusid: drmOpenMinor returns 7
[    22.636] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[    22.636] (II) [drm] nouveau interface version: 0.0.16
[    22.636] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    22.636] (WW) Falling back to old probe method for vesa
[    22.636] (WW) Falling back to old probe method for fbdev
[    22.636] (II) Loading sub module "fbdevhw"
[    22.636] (II) LoadModule: "fbdevhw"
[    22.654] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    22.670] (II) Module fbdevhw: vendor="X.Org Foundation"
[    22.670]    compiled for 1.10.4, module version = 0.0.2
[    22.670]    ABI class: X.Org Video Driver, version 10.0
[    22.670] (II) Loading sub module "dri"
[    22.670] (II) LoadModule: "dri"
[    22.670] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    22.670] (II) Module dri: vendor="X.Org Foundation"
[    22.670]    compiled for 1.10.4, module version = 1.0.0
[    22.670]    ABI class: X.Org Server Extension, version 5.0
[    22.670] (II) NOUVEAU(0): Loaded DRI module
[    22.670] drmOpenDevice: node name is /dev/dri/card0
[    22.670] drmOpenDevice: open result is 8, (OK)
[    22.670] drmOpenDevice: node name is /dev/dri/card0
[    22.670] drmOpenDevice: open result is 8, (OK)
[    22.670] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[    22.670] drmOpenDevice: node name is /dev/dri/card0
[    22.670] drmOpenDevice: open result is 8, (OK)
[    22.670] drmOpenByBusid: drmOpenMinor returns 8
[    22.670] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[    22.670] (II) [drm] DRM interface version 1.4
[    22.671] (II) [drm] DRM open master succeeded.
[    22.671] (--) NOUVEAU(0): Chipset: "NVIDIA NV4e"
[    22.671] (II) NOUVEAU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    22.671] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    22.671] (==) NOUVEAU(0): RGB weight 888
[    22.671] (==) NOUVEAU(0): Default visual is TrueColor
[    22.671] (==) NOUVEAU(0): Using HW cursor
[    22.671] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    22.671] (==) NOUVEAU(0): Page flipping enabled
[    22.797] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    22.805] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[    22.922] (II) NOUVEAU(0): EDID for output VGA-1
[    22.922] (II) NOUVEAU(0): Manufacturer: ABO  Model: 6781  Serial#: 1639
[    22.922] (II) NOUVEAU(0): Year: 2003  Week: 12
[    22.922] (II) NOUVEAU(0): EDID Version: 1.3
[    22.922] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    22.922] (II) NOUVEAU(0): Sync:  Separate  CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[    22.922] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    22.922] (II) NOUVEAU(0): Gamma: 2.20
[    22.922] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    22.922] (II) NOUVEAU(0): First detailed timing is preferred mode
[    22.922] (II) NOUVEAU(0): redX: 0.633 redY: 0.354   greenX: 0.292 greenY: 0.598
[    22.922] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.106   whiteX: 0.305 whiteY: 0.338
[    22.922] (II) NOUVEAU(0): Supported established timings:
[    22.922] (II) NOUVEAU(0): 720x400@70Hz
[    22.922] (II) NOUVEAU(0): 640x480@60Hz
[    22.922] (II) NOUVEAU(0): 640x480@67Hz
[    22.922] (II) NOUVEAU(0): 640x480@72Hz
[    22.922] (II) NOUVEAU(0): 640x480@75Hz
[    22.922] (II) NOUVEAU(0): 800x600@56Hz
[    22.922] (II) NOUVEAU(0): 800x600@60Hz
[    22.922] (II) NOUVEAU(0): 800x600@72Hz
[    22.922] (II) NOUVEAU(0): 800x600@75Hz
[    22.922] (II) NOUVEAU(0): 832x624@75Hz
[    22.922] (II) NOUVEAU(0): 1024x768@60Hz
[    22.922] (II) NOUVEAU(0): 1024x768@70Hz
[    22.922] (II) NOUVEAU(0): 1024x768@75Hz
[    22.922] (II) NOUVEAU(0): 1280x1024@75Hz
[    22.922] (II) NOUVEAU(0): Manufacturer's mask: 0
[    22.922] (II) NOUVEAU(0): Supported standard timings:
[    22.922] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.922] (II) NOUVEAU(0): Supported detailed timing:
[    22.922] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    22.922] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    22.922] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    22.922] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 145 MHz
[    22.922] (II) NOUVEAU(0): Monitor name: Acer AL711
[    22.922] (II) NOUVEAU(0): Serial No: ET70731200667
[    22.922] (II) NOUVEAU(0): EDID (in hex):
[    22.922] (II) NOUVEAU(0):   00ffffffffffff00044f816767060000
[    22.922] (II) NOUVEAU(0):   0c0d01036d221b78ea2c12a25a4a9925
[    22.923] (II) NOUVEAU(0):   1b4e56bfef0081800101010101010101
[    22.923] (II) NOUVEAU(0):   010101010101302a009851002a403070
[    22.923] (II) NOUVEAU(0):   1300520e1100001e000000fd00384b18
[    22.923] (II) NOUVEAU(0):   500e000a202020202020000000fc0041
[    22.923] (II) NOUVEAU(0):   63657220414c3731310a2020000000ff
[    22.923] (II) NOUVEAU(0):   004554373037333132303036363700f2
[    22.923] (II) NOUVEAU(0): EDID vendor "ABO", prod id 26497
[    22.923] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    22.923] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    22.923] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    22.923] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    22.923] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    22.923] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.923] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    22.931] (II) NOUVEAU(0): EDID for output DVI-D-1
[    22.931] (II) NOUVEAU(0): Output VGA-1 connected
[    22.931] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[    22.931] (II) NOUVEAU(0): Using exact sizes for initial modes
[    22.931] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[    22.931] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    22.931] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[    22.931] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    22.931] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.931] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    22.931] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.931] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    22.931] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    22.931] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    22.931] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    22.932] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    22.932] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    22.932] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    22.932] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    22.932] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    22.932] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    22.932] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    22.932] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    22.932] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    22.932] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.932] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    22.932] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    22.932] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[    22.932] (**) NOUVEAU(0): DPI set to (95, 96)
[    22.932] (II) Loading sub module "fb"
[    22.932] (II) LoadModule: "fb"
[    22.932] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    22.946] (II) Module fb: vendor="X.Org Foundation"
[    22.946]    compiled for 1.10.4, module version = 1.0.0
[    22.946]    ABI class: X.Org ANSI C Emulation, version 0.4
[    22.946] (II) Loading sub module "exa"
[    22.946] (II) LoadModule: "exa"
[    22.947] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    22.947] (II) Module exa: vendor="X.Org Foundation"
[    22.947]    compiled for 1.10.4, module version = 2.5.0
[    22.947]    ABI class: X.Org Video Driver, version 10.0
[    22.947] (II) Loading sub module "shadowfb"
[    22.947] (II) LoadModule: "shadowfb"
[    22.948] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    22.948] (II) Module shadowfb: vendor="X.Org Foundation"
[    22.948]    compiled for 1.10.4, module version = 1.0.0
[    22.948]    ABI class: X.Org ANSI C Emulation, version 0.4
[    22.948] (II) UnloadModule: "vesa"
[    22.948] (II) Unloading vesa
[    22.948] (II) UnloadModule: "fbdev"
[    22.948] (II) Unloading fbdev
[    22.948] (II) UnloadModule: "fbdevhw"
[    22.948] (II) Unloading fbdevhw
[    22.948] (--) Depth 24 pixmap format is 32 bpp
[    22.949] (II) NOUVEAU(0): Opened GPU channel 1
[    22.949] (II) NOUVEAU(0): [DRI2] Setup complete
[    22.949] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    22.949] (II) NOUVEAU(0): GART: 64MiB available
[    22.951] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    22.962] (II) EXA(0): Driver allocated offscreen pixmaps
[    22.962] (II) EXA(0): Driver registered support for the following operations:
[    22.962] (II)         Solid
[    22.962] (II)         Copy
[    22.962] (II)         Composite (RENDER acceleration)
[    22.962] (II)         UploadToScreen
[    22.962] (II)         DownloadFromScreen
[    22.962] (==) NOUVEAU(0): Backing store disabled
[    22.962] (==) NOUVEAU(0): Silken mouse enabled
[    22.962] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    22.962] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    22.962] (==) NOUVEAU(0): DPMS enabled
[    22.962] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.963] (--) RandR disabled
[    22.963] (II) Initializing built-in extension Generic Event Extension
[    22.963] (II) Initializing built-in extension SHAPE
[    22.963] (II) Initializing built-in extension MIT-SHM
[    22.963] (II) Initializing built-in extension XInputExtension
[    22.963] (II) Initializing built-in extension XTEST
[    22.963] (II) Initializing built-in extension BIG-REQUESTS
[    22.963] (II) Initializing built-in extension SYNC
[    22.963] (II) Initializing built-in extension XKEYBOARD
[    22.963] (II) Initializing built-in extension XC-MISC
[    22.963] (II) Initializing built-in extension XINERAMA
[    22.963] (II) Initializing built-in extension XFIXES
[    22.963] (II) Initializing built-in extension RENDER
[    22.963] (II) Initializing built-in extension RANDR
[    22.963] (II) Initializing built-in extension COMPOSITE
[    22.963] (II) Initializing built-in extension DAMAGE
[    23.416] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.416] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.416] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.416] (II) AIGLX: enabled GLX_SGI_make_current_read
[    23.416] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.416] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so
[    23.416] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.417] (II) NOUVEAU(0): NVEnterVT is called.
[    26.426] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[    26.426] resize called 1280 1024
[    26.720] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    26.720] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.720] (II) LoadModule: "evdev"
[    26.721] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    26.743] (II) Module evdev: vendor="X.Org Foundation"
[    26.743]    compiled for 1.10.4, module version = 2.6.0
[    26.743]    Module class: X.Org XInput Driver
[    26.743]    ABI class: X.Org XInput driver, version 12.2
[    26.743] (II) Using input driver 'evdev' for 'Power Button'
[    26.743] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    26.743] (**) Power Button: always reports core events
[    26.743] (**) Power Button: Device: "/dev/input/event1"
[    26.743] (--) Power Button: Found keys
[    26.743] (II) Power Button: Configuring as keyboard
[    26.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    26.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    26.743] (**) Option "xkb_rules" "evdev"
[    26.743] (**) Option "xkb_model" "evdev"
[    26.743] (**) Option "xkb_layout" "us"
[    26.766] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    26.766] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.766] (II) Using input driver 'evdev' for 'Power Button'
[    26.766] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    26.767] (**) Power Button: always reports core events
[    26.767] (**) Power Button: Device: "/dev/input/event0"
[    26.767] (--) Power Button: Found keys
[    26.767] (II) Power Button: Configuring as keyboard
[    26.767] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    26.767] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    26.767] (**) Option "xkb_rules" "evdev"
[    26.767] (**) Option "xkb_model" "evdev"
[    26.767] (**) Option "xkb_layout" "us"
[    26.769] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event2)
[    26.769] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    26.769] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
[    26.769] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    26.769] (**) Dell Dell USB Keyboard: always reports core events
[    26.769] (**) Dell Dell USB Keyboard: Device: "/dev/input/event2"
[    26.769] (--) Dell Dell USB Keyboard: Found keys
[    26.769] (II) Dell Dell USB Keyboard: Configuring as keyboard
[    26.769] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input2/event2"
[    26.769] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
[    26.769] (**) Option "xkb_rules" "evdev"
[    26.769] (**) Option "xkb_model" "evdev"
[    26.769] (**) Option "xkb_layout" "us"
[    26.770] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    26.770] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    26.770] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    26.770] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    26.770] (**) Logitech USB Receiver: always reports core events
[    26.770] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[    26.770] (--) Logitech USB Receiver: Found 20 mouse buttons
[    26.770] (--) Logitech USB Receiver: Found scroll wheel(s)
[    26.770] (--) Logitech USB Receiver: Found relative axes
[    26.770] (--) Logitech USB Receiver: Found x and y relative axes
[    26.770] (II) Logitech USB Receiver: Configuring as mouse
[    26.770] (II) Logitech USB Receiver: Adding scrollwheel support
[    26.770] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    26.770] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.770] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input3/event3"
[    26.770] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[    26.770] (II) Logitech USB Receiver: initialized for relative axes.
[    26.770] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    26.770] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    26.770] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    26.770] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    26.771] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    26.771] (II) No input driver/identifier specified (ignoring)
[    27.239] (II) Power Button: Close
[    27.239] (II) UnloadModule: "evdev"
[    27.239] (II) Unloading evdev
[    27.247] (II) Power Button: Close
[    27.247] (II) UnloadModule: "evdev"
[    27.247] (II) Unloading evdev
[    27.272] (II) Dell Dell USB Keyboard: Close
[    27.272] (II) UnloadModule: "evdev"
[    27.272] (II) Unloading evdev
[    27.304] (II) Logitech USB Receiver: Close
[    27.304] (II) UnloadModule: "evdev"
[    27.304] (II) Unloading evdev


I've tried to change the default resolution and color depth and some other parts manually using this config - without any success :

Code:

ICA1SERV001 ~ # cat /etc/X11/xorg.conf.d/40-monitor.conf
Section "Monitor"
  Identifier    "Acer AL711"
  Option        "PreferredMode" "1024x768"
EndSection

Section "Device"
  Identifier    "GeForce 6150 LE"
  Driver        "nouveau"
  Option        "Monitor-VGA-1" "ACER AL711"
  Option        "PreferredMode" "1024x768"
EndSection

Section "Screen"
  Identifier    "Screen0"
  Device        "GeForce 6150 LE"
  Monitor       "Acer AL711"
  DefaultDepth  16
  SubSection "Display"
        Depth   16
        Modes   "1024x768_60.00"
  EndSubSection
EndSection


Thanks a lot in advance. I really appreciate any help on this ...


Last edited by Svenwie on Sat Oct 22, 2011 7:38 am; edited 1 time in total
Back to top
View user's profile Send private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 320
Location: Virginia, USA

PostPosted: Fri Oct 21, 2011 2:04 pm    Post subject: Reply with quote

Did you follow the directions at http://en.gentoo-wiki.com/wiki/Nouveau ?
I have comparing your xorg log to mine (Where Nouveau is working perfectly) and see references to vesa and fb being loaded. For me these modules are not found. It makes me think your kernel is not configured correctly.

Could you please provide your emerge --info ?
Could you also provide your /boot/grub/grub.conf ?
_________________
jfp
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7447

PostPosted: Fri Oct 21, 2011 2:20 pm    Post subject: Reply with quote

did you emerge a desktop to run ?
Look at NeddySeagoon advice (one in the code tag) : https://forums.gentoo.org/viewtopic-p-6825556.html#6825556
Back to top
View user's profile Send private message
Svenwie
n00b
n00b


Joined: 30 Sep 2003
Posts: 9

PostPosted: Sat Oct 22, 2011 7:38 am    Post subject: Reply with quote

Hello Guys,

thanks a lot for your help. I was working myself through the links you've posted and recompiled pretty
much everything on this box - but finally it seems that it must have something to do with the framebuffer
acceleration. I've dsabled that and X was starting right away !!!

For those, who might need to disable it too, just add this line to this file /etc/modprobe.d/nouveau.conf :

Code:
options nouveau nofbaccel=1


Thanks a lot for your help again !!!!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum