Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[RESOLU] [ATI] Radeon 9200 - Failed to read PCI ROM
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
brunof
n00b
n00b


Joined: 05 Jul 2011
Posts: 2

PostPosted: Wed Jul 06, 2011 12:04 am    Post subject: [RESOLU] [ATI] Radeon 9200 - Failed to read PCI ROM Reply with quote

bonjour
je ne suis pas tres experimente, j'ai cherche une solution a mon probleme sur le net ou des forums, je n'ai rien trouve donc je reviens vers vous :
(c'est la premiere fois que je poste donc si je fais des erreurs dites le moi)

voila la config :
PPC G4 -minimac
je n'arrive pas a activer l'acceleration graphique, je suis sous fluxbox grace a xdm, sans xdm je ne pouvais meme pas demarer fluxbox

Code:
 # uname -ra
Linux new-host 2.6.37-gentoo-r4 #3 Sat Jul 2 18:57:47 CEST 2011 ppc 7447A, altivec supported PowerMac10,2 GNU/Linux


Lspci -vvnn :
Code:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 16, Cache Line Size: 32 bytes
        Capabilities: [80] AGP version 1.0
                Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
        Kernel driver in use: agpgart-uninorth
        Kernel modules: uninorth-agp

0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200] [1002:5962] (rev 01) (prog-if 00 [VGA controller])
        Subsystem: ATI Technologies Inc RV280 [Radeon 9200] [1002:5962]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 0400 [size=256]
        Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 90020000 [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: radeonfb
        Kernel modules: radeon


glxinfo

Code:
name of display: :0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_MESA_copy_sub_buffer, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_INTEL_swap_event
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.10.1
OpenGL shading language version string: 1.20
OpenGL extensions:
    GL_ARB_copy_buffer, GL_ARB_depth_clamp, GL_ARB_depth_texture,
    GL_ARB_draw_buffers, GL_ARB_draw_elements_base_vertex,
    GL_ARB_explicit_attrib_location, GL_ARB_fragment_coord_conventions,
    GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
    GL_ARB_fragment_shader, GL_ARB_framebuffer_object,
    GL_ARB_half_float_pixel, GL_ARB_half_float_vertex,
    GL_ARB_map_buffer_range, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_provoking_vertex,
    GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shadow_ambient,
    GL_ARB_shadow, GL_ARB_sync, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
    GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_swizzle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
    GL_ARB_vertex_array_object, GL_ARB_vertex_buffer_object,
    GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
    GL_EXT_depth_bounds_test, GL_EXT_draw_buffers2,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit,
    GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object,
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
    GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
    GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_provoking_vertex,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_shader_objects, GL_EXT_separate_specular_color,
    GL_EXT_shadow_funcs, GL_EXT_shared_texture_palette,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture3D, GL_EXT_texture_array, GL_EXT_texture_cube_map,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture, GL_EXT_texture_rectangle,
    GL_EXT_texture_sRGB, GL_EXT_texture_swizzle, GL_EXT_vertex_array_bgra,
    GL_EXT_vertex_array, GL_OES_read_format, GL_3DFX_texture_compression_FXT1,
    GL_APPLE_object_purgeable, GL_APPLE_packed_pixels,
    GL_APPLE_vertex_array_object, GL_ATI_blend_equation_separate,
    GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_separate_stencil,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
    GL_MESA_pack_invert, GL_MESA_resize_buffers, GL_MESA_texture_array,
    GL_MESA_window_pos, GL_MESA_ycbcr_texture, GL_NV_blend_square,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fragment_program,
    GL_NV_fragment_program_option, GL_NV_light_max_exponent,
    GL_NV_packed_depth_stencil, GL_NV_point_sprite, GL_NV_texgen_reflection,
    GL_NV_texture_env_combine4, GL_NV_texture_rectangle,
    GL_NV_vertex_program1_1, GL_NV_vertex_program, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGI_texture_color_table, GL_SUN_multi_draw_arrays


xorg.conf
Code:
Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/misc/"
   FontPath     "/usr/share/fonts/TTF/"
   FontPath     "/usr/share/fonts/OTF/"
   FontPath     "/usr/share/fonts/Type1/"
   FontPath     "/usr/share/fonts/100dpi/"
   FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
   Load  "extmod"
   Load  "record"
   Load  "glx"
   Load  "dri2"
   Load  "dbe"
   Load  "dri"
   Load  "radeon"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
   Option      "kbLayout" "fr-latin9"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "Dac8Bit"               # [<bool>]
        Option     "BusType"               "PCI"
        #Option     "CPPIOMode"             # [<bool>]
        #Option     "CPusecTimeout"         # <i>
        Option     "AGPMode"               "4"
        Option     "AGPFastWrite"      "True"
        #Option     "AGPSize"               # <i>
        #Option     "GARTSize"              # <i>
        #Option     "RingSize"              # <i>
        #Option     "BufferSize"            # <i>
        #Option     "EnableDepthMoves"      # [<bool>]
        #Option     "EnablePageFlip"        # [<bool>]
        #Option     "NoBackBuffer"          # [<bool>]
        #Option     "DMAForXv"              # [<bool>]
        #Option     "FBTexPercent"          # <i>
        #Option     "DepthBits"             # <i>
        #Option     "PCIAPERSize"           # <i>
        Option     "AccelDFS"              "True"
        #Option     "IgnoreEDID"            # [<bool>]
        #Option     "CustomEDID"            # [<str>]
        #Option     "DisplayPriority"       # [<str>]
        #Option     "PanelSize"             # [<str>]
        #Option     "ForceMinDotClock"      # <freq>
        #Option     "ColorTiling"           "True"
        #Option     "VideoKey"              # <i>
        #Option     "RageTheatreCrystal"    # <i>
        #Option     "RageTheatreTunerPort"    # <i>
        #Option     "RageTheatreCompositePort"    # <i>
        #Option     "RageTheatreSVideoPort"    # <i>
        #Option     "TunerType"             # <i>
        #Option     "RageTheatreMicrocPath"    # <str>
        #Option     "RageTheatreMicrocType"    # <str>
        #Option     "ScalerWidth"           # <i>
        Option     "RenderAccel"           "True"
        #Option     "SubPixelOrder"         # [<str>]
        #Option     "ClockGating"           # [<bool>]
        #Option     "VGAAccess"             # [<bool>]
        #Option     "ReverseDDC"            # [<bool>]
        #Option     "LVDSProbePLL"          # [<bool>]
        #Option     "AccelMethod"           # <str>
        Option     "DRI"                   "True"
        #Option     "ConnectorTable"        # <str>
        #Option     "DefaultConnectorTable"    # [<bool>]
        #Option     "DefaultTMDSPLL"        # [<bool>]
        #Option     "MacModel"              # <str>
        #Option     "TVDACLoadDetect"       # [<bool>]
        #Option     "ForceTVOut"            # [<bool>]
        #Option     "TVStandard"            # <str>
        #Option     "IgnoreLidStatus"       # [<bool>]
        #Option     "DefaultTVDACAdj"       # [<bool>]
        #Option     "Int10"                 # [<bool>]
        #Option     "EXAVSync"              # [<bool>]
        #Option     "ATOMTVOut"             # [<bool>]
        #Option     "R4xxATOM"              # [<bool>]
        #Option     "ForceLowPowerMode"     # [<bool>]
        #Option     "DynamicPM"             # [<bool>]
        #Option     "NewPLL"                # [<bool>]
        #Option     "ZaphodHeads"           # <str>
   Identifier  "Card0"
   Driver      "radeon"
#   BusID       "PCI:0000:00:10.0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection



Xorg.0.log :
Code:
[  3994.246] (II) RADEON: Driver for ATI Radeon chipsets:
   ......
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   
              ........
[  3994.252] (--) using VT number 7

[  3994.288] (II) [KMS] drm report modesetting isn't supported.
[  3994.288] (II) RADEON(0): TOTO SAYS 0000000090000000
[  3994.289] (II) RADEON(0): MMIO registers at 0x0000000090000000: size 64KB
[  3994.289] (II) RADEON(0): PCI bus 0 card 16 func 0
[  3994.289] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  3994.289] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  3994.289] (==) RADEON(0): Default visual is TrueColor
[  3994.289] (**) RADEON(0): Option "BusType" "PCI"
[  3994.289] (**) RADEON(0): Option "AGPMode" "2"
[  3994.289] (**) RADEON(0): Option "AccelDFS" "True"
[  3994.289] (**) RADEON(0): Option "RenderAccel" "True"
[  3994.289] (**) RADEON(0): Option "DRI" "True"
[  3994.289] (II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped
[  3994.289] (==) RADEON(0): RGB weight 888
[  3994.289] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  3994.289] (--) RADEON(0): Chipset: "ATI Radeon 9200 5962 (AGP)" (ChipID = 0x5962)
[  3994.289] (--) RADEON(0): Linear framebuffer at 0x0000000098000000
[  3994.289] (II) RADEON(0): AGP card detected
[  3994.289] (**) RADEON(0): Forced into PCI mode
[  3994.289] (WW) RADEON(0): Failed to read PCI ROM!
[  3994.289] (II) RADEON(0): Attempting to read un-POSTed bios
[  3994.290] (WW) RADEON(0): Failed to read PCI ROM!
[  3994.290] (WW) RADEON(0): Unrecognized BIOS signature, BIOS data will not be used
[  3994.290] drmOpenDevice: node name is /dev/dri/card0
[  3994.298] drmOpenByBusid: Searching for BusID pci:0000:00:10.0
[  3994.298] drmOpenDevice: node name is /dev/dri/card0
[  3994.302] drmOpenByBusid: drmOpenMinor returns -1
[  3994.302] drmOpenDevice: node name is /dev/dri/card1
[  3994.305] drmOpenByBusid: drmOpenMinor returns -1
[  3994.305] drmOpenDevice: node name is /dev/dri/card2
[  3994.309] drmOpenByBusid: drmOpenMinor returns -1
[  3994.309] drmOpenDevice: node name is /dev/dri/card3
[  3994.313] drmOpenByBusid: drmOpenMinor returns -1
[  3994.313] drmOpenDevice: node name is /dev/dri/card4
[  3994.317] drmOpenByBusid: drmOpenMinor returns -1
[  3994.317] drmOpenDevice: node name is /dev/dri/card5
[  3994.321] drmOpenByBusid: drmOpenMinor returns -1
[  3994.321] drmOpenDevice: node name is /dev/dri/card6
[  3994.325] drmOpenByBusid: drmOpenMinor returns -1
[  3994.325] drmOpenDevice: node name is /dev/dri/card7
[  3994.328] drmOpenByBusid: drmOpenMinor returns -1
[  3994.328] drmOpenDevice: node name is /dev/dri/card8
[  3994.332] drmOpenByBusid: drmOpenMinor returns -1
[  3994.332] drmOpenDevice: node name is /dev/dri/card9
[  3994.336] drmOpenByBusid: drmOpenMinor returns -1
[  3994.336] drmOpenDevice: node name is /dev/dri/card10
[  3994.340] drmOpenByBusid: drmOpenMinor returns -1
[  3994.340] drmOpenDevice: node name is /dev/dri/card11
[  3994.344] drmOpenByBusid: drmOpenMinor returns -1
[  3994.344] drmOpenDevice: node name is /dev/dri/card12
[  3994.348] drmOpenByBusid: drmOpenMinor returns -1
[  3994.348] drmOpenDevice: node name is /dev/dri/card13
[  3994.351] drmOpenByBusid: drmOpenMinor returns -1
[  3994.351] drmOpenDevice: node name is /dev/dri/card14
[  3994.355] drmOpenByBusid: drmOpenMinor returns -1
[  3994.355] drmOpenDevice: node name is /dev/dri/card15
[  3994.359] drmOpenByBusid: drmOpenMinor returns -1
[  3994.359] drmOpenDevice: node name is /dev/dri/card0
[  3994.367] drmOpenDevice: node name is /dev/dri/card0
[  3994.370] drmOpenDevice: node name is /dev/dri/card1
[  3994.374] drmOpenDevice: node name is /dev/dri/card2
[  3994.378] drmOpenDevice: node name is /dev/dri/card3
[  3994.382] drmOpenDevice: node name is /dev/dri/card4
[  3994.386] drmOpenDevice: node name is /dev/dri/card5
[  3994.390] drmOpenDevice: node name is /dev/dri/card6
[  3994.393] drmOpenDevice: node name is /dev/dri/card7
[  3994.397] drmOpenDevice: node name is /dev/dri/card8
[  3994.401] drmOpenDevice: node name is /dev/dri/card9
[  3994.405] drmOpenDevice: node name is /dev/dri/card10
[  3994.409] drmOpenDevice: node name is /dev/dri/card11
[  3994.412] drmOpenDevice: node name is /dev/dri/card12
[  3994.416] drmOpenDevice: node name is /dev/dri/card13
[  3994.420] drmOpenDevice: node name is /dev/dri/card14
[  3994.424] drmOpenDevice: node name is /dev/dri/card15
[  3994.428] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[  3994.428] (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
[  3994.428] (II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
[  3994.428] (--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
[  3994.428] (II) RADEON(0): Color tiling enabled by default


dans l'espoir d'une reponse .... Merci
_________________
Noob 4 ever


Last edited by brunof on Wed Jul 06, 2011 7:20 pm; edited 2 times in total
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Wed Jul 06, 2011 12:54 am    Post subject: Reply with quote

Peux-tu mettre ton titre du topic en conformité avec les conventions de notre forum s'il te plait ? Merci :)

Tu as activé le driver DRI pour Radeon dans le kernel ?
Back to top
View user's profile Send private message
brunof
n00b
n00b


Joined: 05 Jul 2011
Posts: 2

PostPosted: Wed Jul 06, 2011 4:58 pm    Post subject: [ATI] Radeon 9200 - Failed to read PCI ROM Reply with quote

voila j'ai repris le titre du post, c'est tout ce qu'il fallait reprendre ??

je ne sais pas c'est quelle option pour activer DRI pour radeon dans le kernel, j'ai donc fais un zcat au hasard, voila ce que ca retourne :

Code:
new-host linux-2.6.37-gentoo-r4 # zcat config.gz | grep DRI2
new-host linux-2.6.37-gentoo-r4 # zcat config.gz | grep RADEON
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
new-host linux-2.6.37-gentoo-r4 # zcat config.gz | grep DRI
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_RAW_DRIVER is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y


edit:

Dans la doc Gentoo : Guide de l'accélération 3D matérielle il y a l'etape a suivre pour l'activer et DRI l'etait bien mais il y a aussi :
Code:
 [*]     Enable modesetting on radeon by default - NEW DRIVER


Je le desactive & recompile pour voir ce que ca donne ...

Edit :
YES !!!
Merci pour m'avoir mis sur la bonne voie, il fallait juste desactiver cette option dans le kernel.... tout fonctionne correctement maintenant
Merci Geekounet...
_________________
Noob 4 ever
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum