| View previous topic :: View next topic |
| Author |
Message |
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
 Posted: Sun Jul 03, 2011 6:09 am Post subject: [SOLVED] VFS cannot open root device "sda3" or unk |
 |
|
Czesc,
Utknalem podczas instalacji zgodnie z handbookiem na uruchomieniu mojej kompilacji :[ komunikat podczas uruchamiania:
| Code: | VFS: Cannot open root device "sda3" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
|
to available partitions: mnie martwi ze jest puste :/
nizej troche konfiguracji:
info z fdisk:
| Code: | Disk identifier: 0x001c2022
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 67583 32768 83 Linux
/dev/sda2 67584 2164735 1048576 82 Linux swap / Solaris
/dev/sda3 2164736 31326207 14580736 83 Linux
|
fstab:
| Code: | /dev/sda1 /boot ext3 defaults,noatime 1 2
/dev/sda2 none swap sw 0 0
/dev/sda3 / ext3 noatime 0 1
proc /proc proc defaults 0 0
|
grub.conf:
| Code: | # Which listing to boot as default. 0 is the first, 1 the second etc.
default 0
timeout 10
splashimage=(hd0,0)/grub/splash.xpm.gz
title Gentoo Linux 2.6.34-r1
root (hd0,0)
kernel /boot/kernel-via_c7_rev01 root=/dev/sda3
title Gentoo Linux 2.6.34-r1 (rescue)
root (hd0,0)
kernel /boot/kernel-via_c7_rev01 root=/dev/sda3 init=/bin/bb
|
...tak jak w handbook :/
dla pewnosci katalog /boot:
| Code: |
lrwxrwxrwx 1 root root 1 Jul 2 18:14 boot -> .
drwxr-xr-x 2 root root 1024 Jul 3 03:56 grub
-rw-r--r-- 1 root root 3226832 Jul 2 16:16 kernel-via_c7_rev01
drwx------ 2 root root 12288 Jul 2 13:51 lost+found
|
i katalog /boot/grub:
| Code: | -rw-r--r-- 1 root root 197 Jul 3 03:56 default
-rw-r--r-- 1 root root 47 Jul 3 09:07 device.map
-rw-r--r-- 1 root root 8780 Jul 3 03:56 e2fs_stage1_5
-rw-r--r-- 1 root root 7912 Jul 3 03:56 fat_stage1_5
-rw-r--r-- 1 root root 7184 Jul 3 03:56 ffs_stage1_5
-rw-r--r-- 1 root root 1002 Jul 3 10:05 grub.conf
-rw-r--r-- 1 root root 7180 Jul 3 03:56 iso9660_stage1_5
-rw-r--r-- 1 root root 8648 Jul 3 03:56 jfs_stage1_5
lrwxrwxrwx 1 root root 9 Jul 2 18:14 menu.lst -> grub.conf
-rw-r--r-- 1 root root 7380 Jul 3 03:56 minix_stage1_5
-rw-r--r-- 1 root root 9744 Jul 3 03:56 reiserfs_stage1_5
-rw-r--r-- 1 root root 33856 Jul 3 03:52 splash.xpm.gz
-rw-r--r-- 1 root root 512 Jul 3 03:56 stage1
-rw-r--r-- 1 root root 107608 Jul 3 03:56 stage2
-rw-r--r-- 1 root root 107608 Jul 2 19:01 stage2.old
-rw-r--r-- 1 root root 107608 Jul 3 03:52 stage2_eltorito
-rw-r--r-- 1 root root 7452 Jul 3 03:56 ufs2_stage1_5
-rw-r--r-- 1 root root 6804 Jul 3 03:56 vstafs_stage1_5
-rw-r--r-- 1 root root 9596 Jul 3 03:56 xfs_stage1_5
|
.config ktorym skompilowalem kernel (dlugi ale moze cos mialem wlaczyc extra):
http://goo.gl/WYf1U
konfiguracja sprzetowa z lspci:
| Code: | 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] |
GRUB poprawnie odczytuje splashimage, menu tez jest poprawne, a po wyborze opcji dostaje kernel panic... :/
Pomozcie bo po przeszukaniu kilku forow juz po malu trace nadzieje :/
Last edited by galandilias on Tue Jul 05, 2011 8:07 pm; edited 1 time in total |
|
| Back to top |
|
 |
Jacekalex
Guru
Joined: 17 Sep 2009
Posts: 554
|
| Posted: Mon Jul 04, 2011 10:23 am Post subject: Re: VFS cannot open root device "sda3" or unknown- |
|
|
| galandilias wrote: | Czesc,
Utknalem podczas instalacji zgodnie z handbookiem na uruchomieniu mojej kompilacji :[ komunikat podczas uruchamiania:
| Code: | VFS: Cannot open root device "sda3" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
|
|
Podobny komunikat wystęuje zazwyczaj w dwóch przypadkach:
1. Kernel nie ma sterownika do danego systemu plików (albo jest skompilowany jako moduł, ale nie jest załadowany, i nie ma go w initrd.
2. Kernel nie ma dostępu do sterownika kontrolera dysku, moduł nie znajduje się ani w kernelu, ani w initrd.
A żeby załadować sterownik z /lib/modules/`uname -r`/* - najpierw musi zamontować partycję root, czego bez tych 2 sterowników zrobić nie potrafi. W ten sposób koło się zamyka.
Radzilbym sterownik kontrolera i modul systemu plików wbudować na stałe w jajo, powinno pomóc.
Sznurek:
http://kmuto.jp/debian/hcl/
I wynik:
| Code: | | lspci -k | egrep -i 'driver|modules' |
Tak sprawdzisz moduły.
To by było na tyle
Last edited by Jacekalex on Sun Aug 14, 2011 12:18 am; edited 2 times in total |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Mon Jul 04, 2011 6:55 pm Post subject: |
|
|
stronka ktora podales fajna - dodalem do kompilacji kilka sterownikow - generalnie nie mam modolow - wszystko dalem w jajo - dalej niestety to samo :/
| Code: | | lspci -k | egrep -i 'driver|modules' |
nie zwraca mi nic |
|
| Back to top |
|
|
Jacekalex
Guru
Joined: 17 Sep 2009
Posts: 554
|
| Posted: Mon Jul 04, 2011 7:47 pm Post subject: |
|
|
A w ogóle masz polecenie lspci w systemie?
Bo np u mnie:
| Code: | root # lspci -k | egrep -i 'driver|modules'
Kernel driver in use: pcieport
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: HDA Intel
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: ahci
Kernel driver in use: i801_smbus
Kernel driver in use: nvidia
Kernel driver in use: r8169
Kernel driver in use: cx8800
Kernel driver in use: cx88_audio
Kernel driver in use: cx88-mpeg driver manager
Kernel driver in use: 3c59x |
Takiego wyniku nie nazwałbym niczym  |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Mon Jul 04, 2011 7:49 pm Post subject: |
|
|
bez grepowania zwraca wynik  takze chba dziala 
| Code: | 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Capabilities: [50] Power Management version 2
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Flags: bus master, medium devsel, latency 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Capabilities: [70] Power Management version 2
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
I/O ports at f200 [size=256]
Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 3bf00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at ff00 [size=8]
I/O ports at fe00 [size=4]
I/O ports at fd00 [size=8]
I/O ports at fc00 [size=4]
I/O ports at fb00 [size=16]
I/O ports at f400 [size=256]
Capabilities: [c0] Power Management version 2
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32, IRQ 20
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at fa00 [size=16]
Capabilities: [c0] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at f900 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at f800 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at f700 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at f600 [size=32]
Capabilities: [80] Power Management version 2
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: VIA Technologies, Inc. K7VT2 motherboard
Flags: medium devsel, IRQ 22
I/O ports at f000 [size=256]
Capabilities: [c0] Power Management version 2
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 3.0
|
|
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Mon Jul 04, 2011 7:50 pm Post subject: |
|
|
grr - obcielo - w kazdym razie pusto nie jest
btw. lspci odpalalem po chroot z pena instalacyjnego |
|
| Back to top |
|
|
Jacekalex
Guru
Joined: 17 Sep 2009
Posts: 554
|
| Posted: Mon Jul 04, 2011 8:36 pm Post subject: |
|
|
| galandilias wrote: | grr - obcielo - w kazdym razie pusto nie jest
btw. lspci odpalalem po chroot z pena instalacyjnego |
Lspci odpal na uruchomionym systemie, a nie w chroot.
Moduły kernela są we wszystkich Linuxach takie same.
Jak zrobisz prawidłowy konfig kernela, to możesz go używać we wszystkich dystrybucjach.
Np mój fruwał między Ubuntu, Gentoo i Debianem, i wszędzie po kompilacji kernela (na tym konfigu), wszystko działa tak samo.
Sznurek:
http://forum.dug.net.pl/viewtopic.php?pid=153575#p153575
To by było na tyle
|
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Mon Jul 04, 2011 8:48 pm Post subject: |
|
|
a widzisz
| Code: | Kernel driver in use: agpgart-via
Kernel modules: shpchp
Kernel driver in use: r8169
Kernel modules: r8169
Kernel driver in use: sata_via
Kernel modules: sata_via
Kernel driver in use: pata_via
Kernel modules: pata_via
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: ehci_hcd
Kernel modules: i2c-viapro
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
Kernel modules: viafb
|
jakby lepiej biore sie znow za kompilacje w takim razie |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 7:32 pm Post subject: |
|
|
ok - kernel panic juz nie leci - albo go nie widze teraz utknalem krok dalej jak sadze
przewija mi sie ekran z monitami wykrywanych urzadzen USB - w koncu staje i zachecajaco na dole miga prompt tylko nic nie moge pisac za to jak odepne mysz USB to sie znow przewija ze mysz odpieta - jak podepne to kolejne info leci ze podpieta - skad tu wytrzasnac BASH?
odpialem mysz i klawe USB zeby mi nie smiecily w komunikatach i mam takie cos:
wczesniej zadnych bledow - ale widze tylko 80 linii :/ md konczy wykrywanie maciezy
| Code: | [...] md: ... autorun DONE.
[...] EXT3-fs (sda3): mounted filesystem with writeback data mode
[...] VFS: Mounted root (ext3 filesystem) readonly on device 8:3
[...] Freeing unused kernel memory: 408k freed
[...] Write protecting the kernel text: 4208k
[...] Write protecting the kernel read-only data: 1536k
[...] init-early.sh used greatest stack depth: 5968 bytes left |
... i tu sie logowanie konczy chyba ze cos zaczne mieszac przy urzadzeniach usb |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Tue Jul 05, 2011 8:56 pm Post subject: |
|
|
| udeva nie miales w runlevelu? |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 8:58 pm Post subject: |
|
|
| robilem z hanbookiem angielskim i tam nie bylo o tym ani slowa... :/ to jest oczywiste? :> |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Tue Jul 05, 2011 9:01 pm Post subject: |
|
|
| stage3 winno miec udeva w sysinit runlevelu od kopa, jak nie, to jest to bug wielki jak stodola. (jestes juz ktoras osoba ktora nie miala udeva w runlevelu). Pobieram sobie stage3 i sprawdze czy tam jest. |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 9:03 pm Post subject: |
|
|
jako swierzak nie mieszalem na wlasna reke za bardzo nic takze hm... pewnie go tam nie bylo
btw. jak napisales | Quote: | | udeva nie miales w runlevelu? |
to tylko mi sie mordka usmiechnela niby informatyk ale nie rozumiem co piszesz  |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 9:10 pm Post subject: |
|
|
| o widzisz - to mnie pocieszyles bo juz cierpliwosc tracilem z ta instalacja |
|
| Back to top |
|
|
Pryka
l33t
Joined: 08 Jun 2007
Posts: 658
Location: /dev/null
|
| Posted: Tue Jul 05, 2011 9:10 pm Post subject: |
|
|
@galandilias Powinieneś mieć udev w /etc/runlevels/sysinit
Czy tam na liście w sekcji sysinit po wydaniu polecenia rc-update
@SlashBeast Ładnie pocisnęli |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 9:12 pm Post subject: |
|
|
oki oki szybko sie ucze ale pewnie jeszcze nie raz bede pytal
Dzieki Panowie |
|
| Back to top |
|
|
galandilias
n00b
Joined: 03 Jul 2011
Posts: 51
|
| Posted: Tue Jul 05, 2011 10:29 pm Post subject: |
|
|
| http://www.gentoo.org/doc/en/udev-guide.xml <_ tu w sekcji known issues jest to samo, powiedzcie mi jeszcze - jak releasowany jest stage? Przy instalacji bralem current a byl z 14.06.2011 w zgloszeniu SlashBeast'a chlopaki pisza o buildzie z 25.06.2011 i to tylko amd64 - stage nie wychodza rowno na wszystkie platformy? Skad ta data 25.06.2011? |
|
| Back to top |
|
|
Pryka
l33t
Joined: 08 Jun 2007
Posts: 658
Location: /dev/null
|
| Posted: Wed Jul 06, 2011 7:28 am Post subject: |
|
|
Ja teraz zaglądam i amd64 current jest z pierwszego tego miesiąca 01.07.2011
x86 jest sprzed miesiąca a dokładniej 15.06.2011
Miszmasz jak wyjdzie, nie ma chyba sztywnych dat, nigdy nie interesowałem się tym, ale można nawet to zauważyć przy wydawaniu LiveDVD, reguła When its done
Tyle, że jak już wychodzi tarball to razem z minimalCD i wersją hardened. |
|
| Back to top |
|
|
Jacekalex
Guru
Joined: 17 Sep 2009
Posts: 554
|
| Posted: Sat Jul 16, 2011 12:09 am Post subject: |
|
|
A u mnie ciekawa sprawa:
Właśnie zauważyłem, że w ogóle nie mam udeva w sysinit, ale w boot, a system wstaje normalnie:
| Code: | root # ls -l /etc/runlevels/sysinit
razem 0
lrwxrwxrwx. 1 root root 17 05-30 07:53 devfs -> /etc/init.d/devfs
lrwxrwxrwx. 1 root root 17 05-30 07:53 dmesg -> /etc/init.d/dmesg |
| Code: | root # rc-update show | grep udev
udev | boot
udev-postmount | default |
O ile pamiętam, nic nie zmieniałem w runlevelu sysinit, od rozpakowania stage,
- od ostatniej instalacji (pod koniec maja).
Wygląda na to, że do podniesienia systemu devfs wystarcza w zupełności.
Pozdrawiam
|
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Sat Jul 16, 2011 1:12 pm Post subject: |
|
|
nie, devfs nie wystarczy w zupelnosci.
Pewnie masz w kernelu devtmpfs i wlaczone automontowanie go do /dev przy boocie. |
|
| Back to top |
|
|
Jacekalex
Guru
Joined: 17 Sep 2009
Posts: 554
|
| Posted: Sat Jul 16, 2011 3:18 pm Post subject: |
|
|
Zgadza się, konfig kernela ostał się z eksperymentów z systemem bez udeva.
| Code: | zgrep -i devtmp /proc/config.gz
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y |
Pozdrawiam
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish) 
