| View previous topic :: View next topic |
| Author |
Message |
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
 Posted: Tue Sep 23, 2003 1:19 pm Post subject: Codecs de video |
 |
|
Hola a to2 de nuevo,
He instalado varios visores de video y hasta ahora me ha resulatdo muy pero muy facil todo, pero me he dado cuenta de que cada tipo de video necesita un visor distinto y esto hace que sea tedioso el probar cada video ó peli con los distintos visores, asi mismo algunos dan error por no poder cargar los cedecs.
¿Como y donde cargo los codecs?, en el Windows de mis compañeros instalan un pack de elisoft que contiene la mayoria de todos los codecs actualizados (aunque instala espias je je je je) y asi mismo utilizan un visualizador como bsplayer para la mayoria de los videos.
Solo hay 2 trancas para lograr que migren a Linux y son el sistema administrativo que corre bajo DOS y que no rula en Dosemu ni en Wine y las pelis que no les enamora tener que estar cambiando de visor para cada video je je je je je je je ..........
Si alguien puede darme luces le agradecere cualquier comentario
Salu2
Eleazar Anzola |
|
| Back to top |
|
 |
RaUleX
n00b
Joined: 18 Sep 2003
Posts: 10
Location: Getafe
|
| Posted: Tue Sep 23, 2003 1:42 pm Post subject: |
|
|
Entiendo que tengas problemas de codecs con otros sistemas operativos no libres, pero ¿que problemas de codecs tienes bajo Gentoo GNU/Linux?.
Usa MPlayer (Movie Player, no confundir con el WMP) con todos los codecs y olvidate de problemas.
para ello:
Y para ver las variables USE que puedes utilizar (interesante antes de emerger  )
| Code: | | # etcat uses mplayer |
Saludos
_________________
mount /dev/nena/home/raulex/cama
ID Jabber: RaUleX@myjabber.net |
|
| Back to top |
|
|
Javier Lopez
Guru
Joined: 13 Sep 2002
Posts: 377
Location: Barcelona
|
| Posted: Tue Sep 23, 2003 1:43 pm Post subject: |
|
|
| Prueba el mplayer, yo aún no he encontrado ningún formato nada que no reproduzca. |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 2:12 pm Post subject: |
|
|
Tengo instalado el mplayer, pero no se que quieres decir con el
#etcat uses mplayer
Tambien he probado el kmplayer y el xmovie, que tienen un gui para los mas novatos (Mis compañeros de oficina) y no rulan todas las pelis ó videos.
Para mejor ejemplo esta la peli de bajos instintos que es un avi y todos lo visualizadores se traban y no rulan, simplemente quedan en negro y es todo.
Salu2
Eleazar |
|
| Back to top |
|
|
Gaenya
Tux's lil' helper
Joined: 03 Apr 2003
Posts: 81
|
| Posted: Tue Sep 23, 2003 3:57 pm Post subject: |
|
|
| Yo tengo instalado mplayer y funciona bien con todos los archivos de video y sonido que le tiro, talvez si nos dices que formato de archivo estas tratando de ver y cual es la salida completa del mplayer talvez te podamos ayudar. |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:23 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:24 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:24 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:25 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:27 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:28 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:29 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:29 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:30 pm Post subject: |
|
|
El archivo es un avi y la salida del mplayer es esta
| Code: | Playing Bajos Instintos.avi
Cache fill: 3,32% (278528 bytes) AVI file format detected.
VIDEO: [DX50] 512x240 24bpp 25,00 fps 691,1 kbps (84,4 kbyte/s)
==========================================================================
Opening audio decoder: [dmo] Win32/DMO decoders
======= WAVE Format =======
Format Tag: 353 (0x161)
Channels: 2
Samplerate: 44100
avg byte/sec: 8010
Block align: 372
bits/sample: 16
cbSize: 10
Unknown extra header dump: [0] [8] [0] [0] [1] [0] [74] [1] [0] [0]
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 2
Samplerate: 44100
avg byte/sec: 176400
Block align: 4
bits/sample: 16
cbSize: 0
External func OLEAUT32.dll:7
External func OLEAUT32.dll:8
GetOutput r=0x0 size:16384 align:1
StreamCount r=0x0 1 1
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64,1 kbit)
Selected audio codec: [wmadmo] afm:dmo (Windows Media Audio DMO)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 512 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,13:1 - prescaling to correct movie aspect.
VO: [xv] 512x240 => 512x240 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0,0% 1 0 1%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc
version. If you think it's MPlayer's fault, please read DOCS/bugreports.html
and follow the instructions there. We can't and won't help unless you provide
this information when reporting a possible bug.
Total Unfree 0 bytes cnt 0 [(nil),0]
Xlib: unexpected async reply (sequence 0x59)!
|
¿Existe algun gui para el mplayer?
Salu2
Eleazar |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Tue Sep 23, 2003 4:35 pm Post subject: |
|
|
Opsssssssss,
pido disculpa, la repeticion fue debido al konqueror que decia que no podia cargar la página y yo le di varias veces reload 
Salu2
Eleazar |
|
| Back to top |
|
|
Javier Lopez
Guru
Joined: 13 Sep 2002
Posts: 377
Location: Barcelona
|
| Posted: Tue Sep 23, 2003 5:18 pm Post subject: |
|
|
Sí, y está en el mismo paquete, arráncalo con gmplayer en vez de mplayer.
Desde ahí podrás configurar los drivers de vídeo y sonido q debe utilizar .. |
|
| Back to top |
|
|
Haduart
Tux's lil' helper
Joined: 05 Aug 2003
Posts: 77
|
| Posted: Tue Sep 23, 2003 8:43 pm Post subject: |
|
|
Por lo que he visto no es un problema de codecs sino un problema de recursos, como si tu sistema no tubiera suficientes recursos para ejecutar ese video ¿?. Para mi que ese video que quieres reproducir esta muy fastidiado y me estrañaria que lo reprodugeras con algun otro programa.
Un buen programa en gui es xine, ocupa un poco per creo que merece la pena |
|
| Back to top |
|
|
Gaenya
Tux's lil' helper
Joined: 03 Apr 2003
Posts: 81
|
| Posted: Tue Sep 23, 2003 9:55 pm Post subject: |
|
|
Haz intentado con otro tipo de salida de video, por ejemplo sdl???
mplayer -vo sdl <Nombre_del_archivo>
Que tipo de tarjeta de video tienes porque me parece que esta intentando usar xv y talvez no esta encontrando soporte para xv |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Wed Sep 24, 2003 1:24 pm Post subject: |
|
|
Mi tarjeta de video es de las que vienen en el MB una sis630 tengo 512MB ram y 256 swap y te dire que he probado con el win.... y el video si se muestra bien.
Donde esta xine en el portage, no logro verlo en media-video y no me acepta un emerge xine
Salu2
Eleazar  |
|
| Back to top |
|
|
Gaenya
Tux's lil' helper
Joined: 03 Apr 2003
Posts: 81
|
| Posted: Wed Sep 24, 2003 4:32 pm Post subject: |
|
|
Intenta con mplayer -vo sdl <Nombre_del_video> o con mplayer -vo x11 <nombre_del_video>
Para el xine dale emerge -s xine y el te listara todos los paquetes que tienen ese nombre |
|
| Back to top |
|
|
Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1318
Location: Caracas / Venezuela
|
| Posted: Wed Sep 24, 2003 5:00 pm Post subject: |
|
|
je je je je emerge xine-ui y esta listo ya puedo ver la peli y mucho mejor que en win.....
Gracias gracias gracias 
Salu2
Eleazar
PD:
1 Solo me queda el sistema administrativo de la empresa y los endoso a gentoo a todos los jorobadores estos je je je je
2 Si algien quiere puede probar y darme una mano con esto bajando los intaladores desde
| Code: | | http://www.sicorres.com/datapro/install19.exe |
El instalador es una aplicación win, pero el sistema administrativo una vez instalado corre en DOS |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
