| View previous topic :: View next topic |
| Author |
Message |
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
 Posted: Tue May 10, 2011 12:52 pm Post subject: [SOLVED] Kernel Panic aftger Update to Kernel-2.6.37 |
 |
|
Hello Everybody
I'm trying to update my kernel to version 2.6.37 using genkernel, but everytime I try to reboot the system with the new kernel, I get the following message:
| Code: | ...
UDF-fs: No partition found (1)
List of all partitions:
No filesystem could mount root, tried: reiserfs ext3 ext2 squashfs vfat iso9660 udf
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
Pid: 1, comm: swapper Not tainted 2.6.37-gentoo-r4 #1
Call Trace:
[<c0402416>] ? prtink+0xf/0x11
[<c040230c>] panic+0x50/0x14b
...
|
I found this problem appearing on other posts, but non of them could help me out. What could be the problem? What additional information do you need?
Last edited by Javaretto on Tue May 10, 2011 8:30 pm; edited 1 time in total |
|
| Back to top |
|
 |
thardy01
Tux's lil' helper
Joined: 05 Aug 2002
Posts: 77
|
| Posted: Tue May 10, 2011 12:57 pm Post subject: |
|
|
| need to compile your hardrive controler into kernel if im not mistaken. if you dont know the correctone post the results of |
|
| Back to top |
|
|
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
| Posted: Tue May 10, 2011 1:22 pm Post subject: |
|
|
Yes, that is what I read in the other articles, and I couldn't find, what should be missing in the kernel-config. So, maybe, I actually missed something:
| Code: | 00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0101: 8086:27c4 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0300: 1002:71c4
02:00.0 0200: 8086:109a
03:00.0 0200: 168c:1014 (rev 01)
15:00.0 0607: 104c:ac56
|
What does this information actually tell me and what can I do with it?
Last edited by Javaretto on Tue May 10, 2011 5:39 pm; edited 2 times in total |
|
| Back to top |
|
|
thardy01
Tux's lil' helper
Joined: 05 Aug 2002
Posts: 77
|
| Posted: Tue May 10, 2011 1:30 pm Post subject: |
|
|
| attemps to give information for all the devices on the pci but "where your hard drive controller sits" as far as what you can do with it go to http://kmuto.jp/debian/hcl/index.rhtmlx and paste it in the box and it will tell you the name of the kernel drivers you need. |
|
| Back to top |
|
|
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
| Posted: Tue May 10, 2011 1:40 pm Post subject: |
|
|
OK, it says the following: http://kmuto.jp/debian/hcl/IBM/T60P
But how do I find these drivers in the menuconfig? Search doesn't find any matches, when I type "intel-agp" or so... |
|
| Back to top |
|
|
thardy01
Tux's lil' helper
Joined: 05 Aug 2002
Posts: 77
|
| Posted: Tue May 10, 2011 1:47 pm Post subject: |
|
|
While in menuconfig allows you to enter search terms if im not mistaken you need i2c-i801. "i would think genkernel would do it automatically". So do | Code: | | genkernal --menuconfig all |
And check to see if its there. Also if you want to make your own kernal without genkernel or learn how to take a look at http://kernel-seeds.org/ |
|
| Back to top |
|
|
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
| Posted: Tue May 10, 2011 1:57 pm Post subject: |
|
|
I'm not shure, whether I understand you properly, what might be my lack of understanding English. So, you think, what's missing in my config is the driver i2c-i801? How can I check this? I used "/" to search, but whatever I try to find (intel-agp, i2c-i801, other drivers), it says: "No matches found."
Last edited by Javaretto on Tue May 10, 2011 5:40 pm; edited 2 times in total |
|
| Back to top |
|
|
thardy01
Tux's lil' helper
Joined: 05 Aug 2002
Posts: 77
|
| Posted: Tue May 10, 2011 2:12 pm Post subject: |
|
|
Don't worry about the rest of the drivers just now search for that should point you to | Code: | | Device Drivers -->I2C support -->I2C Hardware Bus support |
|
|
| Back to top |
|
|
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
| Posted: Tue May 10, 2011 5:38 pm Post subject: |
|
|
Thank you, thardy01, I now also understand, why "/" didn't find anything: The module is called i2c_i801 in the kernel-config. So, I changed to the following settings:
| Code: | Device Drivers --->
{*} I2C support --->
I2C Hardware Bus support --->
<*> Intel 82801 (ICH/PCH)
|
Before, this all was set to be compiled as module. I rebootet the system with the new kernel, but the same error occured as written above... |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 55187
Location: 56N 3W
|
| Posted: Tue May 10, 2011 5:48 pm Post subject: |
|
|
Javaretto,
You need some of this for your hard drive controller.
The kernel has grown some sub menus in the SATA menu since that was written - you need to enable those.
Yo use that post with genkernel, add the -menuconfig option.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Javaretto
n00b
Joined: 28 Jan 2005
Posts: 64
|
| Posted: Tue May 10, 2011 8:29 pm Post subject: |
|
|
| Thank you very much for your help, thardy01 and NeddySeagoon, it finally worked! I went through menuconfig and activated SATA drivers and that did the job... |
|
| Back to top |
|
|
|
Kernel & Hardware
