hika Apprentice
Joined: 13 Mar 2009 Posts: 234 Location: Utrecht
|
Posted: Mon Nov 04, 2013 12:59 pm Post subject: lirc_serial kernel module won't load [solved] |
|
|
I had Lirc working with my hauppauge PV350, but I want to move the card to a dedicated mythbackend in my server, so as not to have the frontend running needlessly. So I soldered a serial receiver and reemerged lirc with LIRC_DEVICES="serial".
Now when I want to load lirc_serial I get:
Code: | modprobe: ERROR: could not insert 'lirc_serial' : Device or resource busy |
In dmesg I see the serialports being found:
Code: | [ 2.133769] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.154515] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.420285] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
I know it's the first one, the other is not connected, but both give the error.
I have been looking around and found something about:
Code: | setserial /dev/ttyS0 uart none |
to release the serial port, but I don't know which package to emerge to get setserial.
Can anybody give me a hint?
Hika
Last edited by hika on Mon Nov 04, 2013 4:11 pm; edited 1 time in total |
|