| View previous topic :: View next topic |
| Author |
Message |
andrewwalker27
l33t
Joined: 27 Jun 2005
Posts: 660
|
 Posted: Sun Mar 20, 2011 12:00 am Post subject: WinTV nova-t not working (SOLVED) |
 |
|
I'm trying to get my TV card working in kernel-2.6.38 but the kernel doesn't seem to want to talk to it.
Here's the errors I'm getting
[ 124.815309] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[ 124.815318] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 124.815328] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
[ 124.815335] cx88[0]/2: cx2388x based DVB/ATSC card
[ 124.815340] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 124.819808] DVB: Unable to find symbol dvb_pll_attach()
[ 124.819822] cx88[0]/2: dvb_register failed (err = -22)
[ 124.819829] cx88[0]/2: cx8802 probe failed, err = -22
the card model is as follows
[ 14.530078] cx88[0]: hauppauge eeprom: model=90003
and loaded modules are
Module Size Used by
adt7475 21919 0
hwmon_vid 2019 1 adt7475
cx22702 4535 0
videobuf_dvb 5098 0
cx8802 12574 0
nvidia 10264753 38
cx8800 27730 0
cx88xx 72944 2 cx8802,cx8800
i2c_algo_bit 4670 1 cx88xx
tveeprom 13065 1 cx88xx
v4l2_common 7960 2 cx8800,cx88xx
videodev 62505 3 cx8800,cx88xx,v4l2_common
v4l2_compat_ioctl32 6593 1 videodev
btcx_risc 3562 3 cx8802,cx8800,cx88xx
videobuf_dma_sg 8150 3 cx8802,cx8800,cx88xx
videobuf_core 15708 5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
k10temp 3119 0
i2c_piix4 8151 0
asus_atk0110 10380 0
hwmon 1830 3 adt7475,k10temp,asus_atk0110
i2c_core 20390 10 adt7475,cx22702,cx8800,cx88xx,nvidia,i2c_algo_bit,tveeprom,v4l2_common,videodev,i2c_piix4
Any ideas anyone?
Last edited by andrewwalker27 on Sun Mar 20, 2011 9:56 pm; edited 1 time in total |
|
| Back to top |
|
 |
blotto
Tux's lil' helper
Joined: 03 Jul 2003
Posts: 116
Location: Whitehaven UK
|
| Posted: Sun Mar 20, 2011 8:56 pm Post subject: |
|
|
Hi
Have you tried the info at linuxtv http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-Stick
I have the nova-t 500 dual and it uses the same modules listed on linuxtv
here is a snip of my dmesg
| Quote: | usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=2040, idProduct=9950
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: WinTV Nova-DT
usb 2-1: Manufacturer: Hauppauge
usb 2-1: SerialNumber: 4028965499 |
and
| Quote: | dib0700: loaded with support for 15 different device-types
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
lirc_dev: IR Remote Control driver registered, major 253
IR LIRC bridge handler initialized
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1213)
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1228)
dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700 |
lsmod
| Quote: | Module Size Used by
fuse 65868 1
mt2060 4493 2
ir_lirc_codec 4243 0
lirc_dev 11216 1 ir_lirc_codec
dvb_usb_dib0700 81482 0
dib7000p 17061 1 dvb_usb_dib0700
dib0090 13713 1 dvb_usb_dib0700
dib7000m 14232 1 dvb_usb_dib0700
dib0070 8190 1 dvb_usb_dib0700
dvb_usb 16059 1 dvb_usb_dib0700
dib8000 26888 1 dvb_usb_dib0700
dvb_core 95232 3 dib7000p,dvb_usb,dib8000
dib3000mc 12049 3 dvb_usb_dib0700
ir_sony_decoder 2301 0
ir_jvc_decoder 2394 0
dibx000_common 3397 4 dib7000p,dib7000m,dib8000,dib3000mc
ir_rc6_decoder 2874 0
ir_rc5_decoder 2394 0
ir_nec_decoder 2618 0
ir_core 17553 8 ir_lirc_codec,dvb_usb_dib0700,dvb_usb,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder
forcedeth 53009 0
k8temp 3811 0
snd_usb_audio 103922 2
snd_pcm 79453 1 snd_usb_audio
snd_timer 20489 1 snd_pcm
snd_page_alloc 8029 1 snd_pcm
snd_hwdep 6482 1 snd_usb_audio
snd_usbmidi_lib 19562 1 snd_usb_audio
snd_rawmidi 20798 1 snd_usbmidi_lib
snd_seq_device 6049 1 snd_rawmidi
snd 58520 11 snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq_device |
Check the linuxtv site and let us know how you get on |
|
| Back to top |
|
|
andrewwalker27
l33t
Joined: 27 Jun 2005
Posts: 660
|
| Posted: Sun Mar 20, 2011 9:29 pm Post subject: |
|
|
Sorry, should have mentioned that it was a PCI card, not a USB stick!
When I try modprobe cx88_dvb I get the following
FATAL: Error inserting cx88_dvb (/lib/modules/2.6.38-gentoo/kernel/drivers/media/video/cx88/cx88-dvb.ko): No such device
The file cx88-dvb.ko exists there so what's the problem? When I do lspci it shows up as this
02:07.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
02:07.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
02:07.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
The dmesg errors I get are
[15285.915320] cx8802_alloc_frontends() allocating 1 frontend(s)
[15285.919061] DVB: Unable to find symbol dvb_pll_attach()
[15285.919065] cx88[0]/2: dvb_register failed (err = -22)
[15285.919067] cx88[0]/2: cx8802 probe failed, err = -22 |
|
| Back to top |
|
|
andrewwalker27
l33t
Joined: 27 Jun 2005
Posts: 660
|
| Posted: Sun Mar 20, 2011 9:56 pm Post subject: |
|
|
Seems to be a kernel bug. You need the following kernel option to work around it.
Kernel Configuration:
Device Drivers -->
Multimedia devices -->
DVB/ATSC adapters -->
Customize DVB frontends -->
<*> Generic I2C PLL based tuners
May affect a lot more cards other than mine. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
