Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] AMD HD 6370m and ati-drivers
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
actac
n00b
n00b


Joined: 13 Apr 2011
Posts: 2

PostPosted: Wed Apr 13, 2011 9:54 am    Post subject: [Solved] AMD HD 6370m and ati-drivers Reply with quote

i have eMachines e732G. i try to use closed drivers on it, but i have one problem.
I emerged the ati-drivers-11.3 and tried to create xorg.conf, but I got an error.
with 11.2 i got this error too.

$aticonfig
Code:
aticonfig : No supported adapters detected


this is my output for
$lspci --vv
Code:

   BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [88] Subsystem: Acer Incorporated [ALI] Device 0498
   Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
         ClockPM- Surprise- LLActRep- BwNot+
      LnkCtl:   ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
         Slot #17, PowerLimit 75.000W; Interlock- NoCompl+
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [100 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
         Status:   NegoPending- InProgress-

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 7
   Region 0: Memory at d4106100 (64-bit, non-prefetchable) [size=16]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
      Address: 0000000000000000  Data: 0000

00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d4105c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 41
   Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000fee0f00c  Data: 4169
   Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE- FLReset+
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
         ClockPM- Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
   Capabilities: [100 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
      VC1:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=1 ArbSelect=Fixed TC/VC=00
         Status:   NegoPending- InProgress-
   Capabilities: [130 v1] Root Complex Link
      Desc:   PortNumber=0f ComponentID=00 EltType=Config
      Link0:   Desc:   TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
         Addr:   00000000fed1c000
   Kernel driver in use: HDA Intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: d3000000-d3ffffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
         ClockPM- Surprise- LLActRep+ BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
         Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
      DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+ ARIFwd-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0498
   Capabilities: [a0] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00001000-00001fff
   Memory behind bridge: d2000000-d2ffffff
   Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
         ClockPM- Surprise- LLActRep+ BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
         Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
      DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+ ARIFwd-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0498
   Capabilities: [a0] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 23
   Region 0: Memory at d4105800 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 0498

00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 40
   Region 0: I/O ports at 4048 [size=8]
   Region 1: I/O ports at 4054 [size=4]
   Region 2: I/O ports at 4040 [size=8]
   Region 3: I/O ports at 4050 [size=4]
   Region 4: I/O ports at 4020 [size=32]
   Region 5: Memory at d4105000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: fee0f00c  Data: 4151
   Capabilities: [70] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
   Capabilities: [b0] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 19
   Region 0: Memory at d4106000 (64-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at 4000 [size=32]
   Kernel modules: i2c-i801

01:00.0 VGA compatible controller: ATI Technologies Inc Robson CE [AMD Radeon HD 6300 Series] (prog-if 00 [VGA controller])
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Region 2: Memory at d4000000 (64-bit, non-prefetchable) [size=128K]
   Region 4: I/O ports at 3000 [size=256]
   Expansion ROM at d4040000 [disabled] [size=128K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
         ClockPM- Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis-
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
      Address: 0000000000000000  Data: 0000
   Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Kernel driver in use: fglrx_pci
   Kernel modules: fglrx

01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 42
   Region 0: Memory at d4020000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
         ClockPM- Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis-
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000fee0f00c  Data: 4171
   Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Kernel driver in use: HDA Intel

02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
   Subsystem: Acer Incorporated [ALI] Device 047f
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 43
   Region 0: Memory at d3000000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [48] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
   Capabilities: [60] Vendor Specific Information: Len=6c <?>
   Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000fee0f00c  Data: 4179
   Capabilities: [cc] Express (v2) Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 4096 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <32us
         ClockPM+ Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [13c v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
   Capabilities: [160 v1] Device Serial Number 60-eb-69-ff-fe-97-ee-54
   Capabilities: [16c v1] Power Budgeting <?>
   Kernel driver in use: tg3
   Kernel modules: tg3

03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
   Subsystem: Foxconn International, Inc. Device e035
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 5
   Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [40] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM- Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis+
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [140 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
   Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
   Capabilities: [170 v1] Power Budgeting <?>

7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
   Subsystem: Acer Incorporated [ALI] Device 0498
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0


$lsmod
Code:

Module                  Size  Used by
fglrx                2648089  249
tg3                   104022  0
i2c_i801                6668  0
i2c_core               15761  1 i2c_i801


Then I tried to run the X server, and it worked. Earn all, including visual effects. But there was bad news, right below the screen I got an inscription on unsupported hardware. I understand that any driver established incorrectly, or did I go wrong somewhere else. have any ideas how I can fix this?

my /var/log/Xorg.0.log
http://pastebin.com/UugM8Czj

my $emerge --info
http://pastebin.com/21cFX1cZ


and my .config for kernel
http://pastebin.com/AsqhjX6D

p.s. sorry for my bad english


Last edited by actac on Thu Apr 14, 2011 8:30 pm; edited 1 time in total
Back to top
View user's profile Send private message
GES
Tux's lil' helper
Tux's lil' helper


Joined: 12 Jun 2005
Posts: 107
Location: Budapest, Hungary

PostPosted: Wed Apr 13, 2011 11:19 am    Post subject: Reply with quote

I have the same situation.

# lspci -vv
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Device 68e4 (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device 1411
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at d4500000 (64-bit, non-prefetchable) [size=128K]
        Region 4: I/O ports at 5000 [size=256]
        Expansion ROM at d4540000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0f00c  Data: 41b1
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Kernel driver in use: fglrx_pci
        Kernel modules: fglrx

The unsupported hardware watermark can be removed:
# cat /usr/local/bin/rm_ati_fgrlx_unsuphw_logo
Code:
#!/bin/sh
DRIVER=/usr/lib/xorg/modules/drivers/fglrx_drv.so
for x in $(objdump -d $DRIVER|awk '/call/&&/EnableLogo/{print "\\x"$2"\\x"$3"\\x"$4"\\x"$5"\\x"$6}'); do
    sed -i "s/$x/\x90\x90\x90\x90\x90/g" $DRIVER
done
Back to top
View user's profile Send private message
actac
n00b
n00b


Joined: 13 Apr 2011
Posts: 2

PostPosted: Thu Apr 14, 2011 8:29 pm    Post subject: Reply with quote

thanks, it helped. I first thought that my video card is supported. apparently I was wrong.
solved
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum