Gnome startx - first start takes 40 second why?!!!

[gentoo2x]

Hi,

After turn laptop on, the first start of Gnome takes about 40-45 seconds long. I don't use GDM simple startx command. I have intel integrated graphics card in ThinkPad T410.
Fluxbox first start takes 2 seconds to load so why GNOME Shell does not? Second time Gnome loads in 3 seconds!

I think it is releated with intel card, because in Xorg.0.log is 14 seconds break after:
(II) intel(0): EDID vendor "LEN", prod id 16438

only in first start.

My log file: cat /var/log/Xorg.0.log

[ 37.624]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 37.624] X Protocol Version 11, Revision 0
[ 37.624] Build Operating System: Linux 3.7.1 x86_64 Gentoo
[ 37.624] Current Operating System: Linux thinkpad 3.13.6 #1 SMP Sat Mar 22 14:30:59 CET 2014 x86_64
[ 37.624] Kernel command line: root=/dev/sda5 raid=noautodetect
[ 37.624] Build Date: 19 February 2014 08:50:35PM
[ 37.625]
[ 37.625] Current version of pixman: 0.32.4
[ 37.625] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 37.625] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.673] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 23 13:57:02 2014
[ 37.762] (==) Using config file: "/etc/X11/xorg.conf"
[ 37.762] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.762] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 37.833] (==) ServerLayout "X.org Configured"
[ 37.833] (**) |-->Screen "Screen0" (0)
[ 37.833] (**) | |-->Monitor "Monitor0"
[ 37.833] (**) | |-->Device "Card0"
[ 37.833] (**) |-->Input Device "Mouse0"
[ 37.833] (**) |-->Input Device "Keyboard0"
[ 37.833] (==) Automatically adding devices
[ 37.833] (==) Automatically enabling devices
[ 37.833] (==) Automatically adding GPU devices
[ 37.932] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 37.932] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 37.932] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 37.932] (WW) Disabling Mouse0
[ 37.932] (WW) Disabling Keyboard0
[ 37.940] (II) Loader magic: 0x603c60
[ 37.940] (II) Module ABI versions:
[ 37.940] X.Org ANSI C Emulation: 0.4
[ 37.940] X.Org Video Driver: 15.0
[ 37.940] X.Org XInput driver : 20.0
[ 37.940] X.Org Server Extension : 8.0
[ 37.940] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 37.943] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 37.950] Initializing built-in extension Generic Event Extension
[ 37.950] Initializing built-in extension SHAPE
[ 37.950] Initializing built-in extension MIT-SHM
[ 37.950] Initializing built-in extension XInputExtension
[ 37.950] Initializing built-in extension XTEST
[ 37.950] Initializing built-in extension BIG-REQUESTS
[ 37.950] Initializing built-in extension SYNC
[ 37.950] Initializing built-in extension XKEYBOARD
[ 37.950] Initializing built-in extension XC-MISC
[ 37.950] Initializing built-in extension XINERAMA
[ 37.950] Initializing built-in extension XFIXES
[ 37.950] Initializing built-in extension RENDER
[ 37.950] Initializing built-in extension RANDR
[ 37.951] Initializing built-in extension COMPOSITE
[ 37.951] Initializing built-in extension DAMAGE
[ 37.951] Initializing built-in extension MIT-SCREEN-SAVER
[ 37.953] Initializing built-in extension DOUBLE-BUFFER
[ 37.955] Initializing built-in extension RECORD
[ 37.958] Initializing built-in extension DPMS
[ 37.960] Initializing built-in extension Present
[ 37.962] Initializing built-in extension DRI3
[ 37.965] Initializing built-in extension X-Resource
[ 37.967] Initializing built-in extension XVideo
[ 37.969] Initializing built-in extension XVideo-MotionCompensation
[ 37.971] Initializing built-in extension XFree86-VidModeExtension
[ 37.973] Initializing built-in extension XFree86-DGA
[ 37.975] Initializing built-in extension XFree86-DRI
[ 37.977] Initializing built-in extension DRI2
[ 37.977] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 37.977] (II) LoadModule: "glx"
[ 38.140] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 38.377] (II) Module glx: vendor="X.Org Foundation"
[ 38.377] compiled for 1.15.0, module version = 1.0.0
[ 38.377] ABI class: X.Org Server Extension, version 8.0
[ 38.377] (==) AIGLX enabled
[ 38.378] Loading extension GLX
[ 38.379] (II) LoadModule: "intel"
[ 38.379] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 38.428] (II) Module intel: vendor="X.Org Foundation"
[ 38.428] compiled for 1.15.0, module version = 2.99.910
[ 38.428] Module class: X.Org Video Driver
[ 38.428] ABI class: X.Org Video Driver, version 15.0
[ 38.428] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 38.428] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 38.428] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 38.428] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 38.428] (--) using VT number 2

[ 38.462] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 38.462] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 38.462] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 38.462] (==) intel(0): RGB weight 888
[ 38.462] (==) intel(0): Default visual is TrueColor
[ 38.462] (**) intel(0): Framebuffer tiled
[ 38.462] (**) intel(0): Pixmaps tiled
[ 38.462] (**) intel(0): "Tear free" disabled
[ 38.462] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 38.462] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 38.463] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 38.463] (II) intel(0): Output VGA1 has no monitor section
[ 38.463] (II) intel(0): Output HDMI1 has no monitor section
[ 38.463] (II) intel(0): Output DP1 has no monitor section
[ 38.463] (II) intel(0): Output HDMI2 has no monitor section
[ 38.463] (II) intel(0): Output HDMI3 has no monitor section
[ 38.463] (II) intel(0): Output DP2 has no monitor section
[ 38.463] (II) intel(0): Output DP3 has no monitor section
[ 38.463] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 38.463] (--) intel(0): Output LVDS1 using initial mode 1440x900 on pipe 0
[ 38.463] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[ 38.463] (==) intel(0): DPI set to (96, 96)
[ 38.463] (II) Loading sub module "dri2"
[ 38.463] (II) LoadModule: "dri2"
[ 38.463] (II) Module "dri2" already built-in
[ 38.463] (==) Depth 24 pixmap format is 32 bpp
[ 38.488] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 38.488] (==) intel(0): Backing store enabled
[ 38.488] (==) intel(0): Silken mouse enabled
[ 38.489] (II) intel(0): HW Cursor enabled
[ 38.489] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38.492] (==) intel(0): DPMS enabled
[ 38.492] (II) intel(0): [DRI2] Setup complete
[ 38.492] (II) intel(0): [DRI2] DRI driver: i965
[ 38.492] (II) intel(0): [DRI2] VDPAU driver: i965
[ 38.492] (II) intel(0): direct rendering: DRI2 Enabled
[ 38.492] (==) intel(0): hotplug detection: "enabled"
[ 38.492] (--) RandR disabled
[ 38.701] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 38.701] (II) AIGLX: enabled GLX_ARB_create_context
[ 38.701] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 38.701] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 38.701] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 38.701] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 38.701] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 38.701] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 38.701] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 38.701] (II) AIGLX: Loaded and initialized i965
[ 38.701] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.730] (II) intel(0): switch to mode 1440x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 38.753] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 38.757] (II) intel(0): Setting screen physical size to 508 x 285
[ 39.487] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 39.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.487] (**) Power Button: Applying InputClass "keyboard-all"
[ 39.487] (II) LoadModule: "evdev"
[ 39.488] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 39.529] (II) Module evdev: vendor="X.Org Foundation"
[ 39.529] compiled for 1.15.0, module version = 2.8.2
[ 39.529] Module class: X.Org XInput Driver
[ 39.529] ABI class: X.Org XInput driver, version 20.0
[ 39.529] (II) Using input driver 'evdev' for 'Power Button'
[ 39.529] (**) Power Button: always reports core events
[ 39.529] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 39.530] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 39.530] (--) evdev: Power Button: Found keys
[ 39.530] (II) evdev: Power Button: Configuring as keyboard
[ 39.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 39.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 39.530] (**) Option "xkb_rules" "evdev"
[ 39.530] (**) Option "xkb_model" "pc104"
[ 39.530] (**) Option "xkb_layout" "pl"
[ 39.579] (II) config/udev: Adding input device Video Bus (/dev/input/event19)
[ 39.579] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 39.579] (**) Video Bus: Applying InputClass "keyboard-all"
[ 39.579] (II) Using input driver 'evdev' for 'Video Bus'
[ 39.579] (**) Video Bus: always reports core events
[ 39.579] (**) evdev: Video Bus: Device: "/dev/input/event19"
[ 39.579] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 39.579] (--) evdev: Video Bus: Found keys
[ 39.579] (II) evdev: Video Bus: Configuring as keyboard
[ 39.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input20/event19"
[ 39.579] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 39.579] (**) Option "xkb_rules" "evdev"
[ 39.579] (**) Option "xkb_model" "pc104"
[ 39.579] (**) Option "xkb_layout" "pl"
[ 39.580] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 39.580] (**) Lid Switch: Applying InputClass "keyboard-all"
[ 39.580] (II) Using input driver 'evdev' for 'Lid Switch'
[ 39.580] (**) Lid Switch: always reports core events
[ 39.580] (**) evdev: Lid Switch: Device: "/dev/input/event0"
[ 39.580] (--) evdev: Lid Switch: Vendor 0 Product 0x5
[ 39.580] (WW) evdev: Lid Switch: Don't know how to use device
[ 39.588] (EE) PreInit returned 8 for "Lid Switch"
[ 39.588] (II) UnloadModule: "evdev"
[ 39.588] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 39.588] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 39.588] (**) Sleep Button: Applying InputClass "keyboard-all"
[ 39.588] (II) Using input driver 'evdev' for 'Sleep Button'
[ 39.588] (**) Sleep Button: always reports core events
[ 39.588] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 39.588] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 39.588] (--) evdev: Sleep Button: Found keys
[ 39.588] (II) evdev: Sleep Button: Configuring as keyboard
[ 39.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 39.588] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 39.588] (**) Option "xkb_rules" "evdev"
[ 39.588] (**) Option "xkb_model" "pc104"
[ 39.588] (**) Option "xkb_layout" "pl"
[ 39.588] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 39.589] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event5)
[ 39.589] (**) Logitech USB Trackball: Applying InputClass "evdev pointer catchall"
[ 39.589] (**) Logitech USB Trackball: Applying InputClass "keyboard-all"
[ 39.589] (II) Using input driver 'evdev' for 'Logitech USB Trackball'
[ 39.589] (**) Logitech USB Trackball: always reports core events
[ 39.589] (**) evdev: Logitech USB Trackball: Device: "/dev/input/event5"
[ 39.589] (--) evdev: Logitech USB Trackball: Vendor 0x46d Product 0xc408
[ 39.589] (--) evdev: Logitech USB Trackball: Found 9 mouse buttons
[ 39.589] (--) evdev: Logitech USB Trackball: Found relative axes
[ 39.589] (--) evdev: Logitech USB Trackball: Found x and y relative axes
[ 39.589] (II) evdev: Logitech USB Trackball: Configuring as mouse
[ 39.589] (**) evdev: Logitech USB Trackball: YAxisMapping: buttons 4 and 5
[ 39.589] (**) evdev: Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7/event5"
[ 39.589] (II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE, id 9)
[ 39.589] (II) evdev: Logitech USB Trackball: initialized for relative axes.
[ 39.589] (**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
[ 39.589] (**) Logitech USB Trackball: (accel) acceleration profile 0
[ 39.589] (**) Logitech USB Trackball: (accel) acceleration factor: 2.000
[ 39.589] (**) Logitech USB Trackball: (accel) acceleration threshold: 4
[ 39.589] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse0)
[ 39.589] (**) Logitech USB Trackball: Applying InputClass "keyboard-all"
[ 39.589] (II) Using input driver 'evdev' for 'Logitech USB Trackball'
[ 39.589] (**) Logitech USB Trackball: always reports core events
[ 39.589] (**) evdev: Logitech USB Trackball: Device: "/dev/input/mouse0"
[ 39.589] (EE) evdev: Logitech USB Trackball: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[ 39.589] (EE) Logitech USB Trackball: Couldn't open mtdev device
[ 39.601] (EE) PreInit returned 2 for "Logitech USB Trackball"
[ 39.601] (II) UnloadModule: "evdev"
[ 39.601] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 39.601] (**) HDA Digital PCBeep: Applying InputClass "keyboard-all"
[ 39.601] (II) Using input driver 'evdev' for 'HDA Digital PCBeep'
[ 39.601] (**) HDA Digital PCBeep: always reports core events
[ 39.601] (**) evdev: HDA Digital PCBeep: Device: "/dev/input/event11"
[ 39.601] (--) evdev: HDA Digital PCBeep: Vendor 0x14f1 Product 0x5069
[ 39.601] (WW) evdev: HDA Digital PCBeep: Don't know how to use device
[ 39.611] (EE) PreInit returned 8 for "HDA Digital PCBeep"
[ 39.611] (II) UnloadModule: "evdev"
[ 39.611] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event18)
[ 39.611] (**) HDA Intel MID Mic: Applying InputClass "keyboard-all"
[ 39.611] (II) Using input driver 'evdev' for 'HDA Intel MID Mic'
[ 39.611] (**) HDA Intel MID Mic: always reports core events
[ 39.611] (**) evdev: HDA Intel MID Mic: Device: "/dev/input/event18"
[ 39.611] (--) evdev: HDA Intel MID Mic: Vendor 0 Product 0
[ 39.611] (WW) evdev: HDA Intel MID Mic: Don't know how to use device
[ 39.621] (EE) PreInit returned 8 for "HDA Intel MID Mic"
[ 39.621] (II) UnloadModule: "evdev"
[ 39.621] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event17)
[ 39.621] (**) HDA Intel MID Dock Mic: Applying InputClass "keyboard-all"
[ 39.621] (II) Using input driver 'evdev' for 'HDA Intel MID Dock Mic'
[ 39.621] (**) HDA Intel MID Dock Mic: always reports core events
[ 39.621] (**) evdev: HDA Intel MID Dock Mic: Device: "/dev/input/event17"
[ 39.621] (--) evdev: HDA Intel MID Dock Mic: Vendor 0 Product 0
[ 39.621] (WW) evdev: HDA Intel MID Dock Mic: Don't know how to use device
[ 39.631] (EE) PreInit returned 8 for "HDA Intel MID Dock Mic"
[ 39.631] (II) UnloadModule: "evdev"
[ 39.631] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event16)
[ 39.631] (**) HDA Intel MID Dock Headphone: Applying InputClass "keyboard-all"
[ 39.631] (II) Using input driver 'evdev' for 'HDA Intel MID Dock Headphone'
[ 39.631] (**) HDA Intel MID Dock Headphone: always reports core events
[ 39.631] (**) evdev: HDA Intel MID Dock Headphone: Device: "/dev/input/event16"
[ 39.631] (--) evdev: HDA Intel MID Dock Headphone: Vendor 0 Product 0
[ 39.631] (WW) evdev: HDA Intel MID Dock Headphone: Don't know how to use device
[ 39.641] (EE) PreInit returned 8 for "HDA Intel MID Dock Headphone"
[ 39.641] (II) UnloadModule: "evdev"
[ 39.641] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event15)
[ 39.641] (**) HDA Intel MID Headphone: Applying InputClass "keyboard-all"
[ 39.641] (II) Using input driver 'evdev' for 'HDA Intel MID Headphone'
[ 39.641] (**) HDA Intel MID Headphone: always reports core events
[ 39.641] (**) evdev: HDA Intel MID Headphone: Device: "/dev/input/event15"
[ 39.641] (--) evdev: HDA Intel MID Headphone: Vendor 0 Product 0
[ 39.641] (WW) evdev: HDA Intel MID Headphone: Don't know how to use device
[ 39.651] (EE) PreInit returned 8 for "HDA Intel MID Headphone"
[ 39.651] (II) UnloadModule: "evdev"
[ 39.651] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 39.651] (**) HDA Intel MID HDMI/DP,pcm=3: Applying InputClass "keyboard-all"
[ 39.651] (II) Using input driver 'evdev' for 'HDA Intel MID HDMI/DP,pcm=3'
[ 39.651] (**) HDA Intel MID HDMI/DP,pcm=3: always reports core events
[ 39.651] (**) evdev: HDA Intel MID HDMI/DP,pcm=3: Device: "/dev/input/event14"
[ 39.651] (--) evdev: HDA Intel MID HDMI/DP,pcm=3: Vendor 0 Product 0
[ 39.651] (WW) evdev: HDA Intel MID HDMI/DP,pcm=3: Don't know how to use device
[ 39.661] (EE) PreInit returned 8 for "HDA Intel MID HDMI/DP,pcm=3"
[ 39.661] (II) UnloadModule: "evdev"
[ 39.661] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event13)
[ 39.661] (**) HDA Intel MID HDMI/DP,pcm=7: Applying InputClass "keyboard-all"
[ 39.661] (II) Using input driver 'evdev' for 'HDA Intel MID HDMI/DP,pcm=7'
[ 39.661] (**) HDA Intel MID HDMI/DP,pcm=7: always reports core events
[ 39.661] (**) evdev: HDA Intel MID HDMI/DP,pcm=7: Device: "/dev/input/event13"
[ 39.661] (--) evdev: HDA Intel MID HDMI/DP,pcm=7: Vendor 0 Product 0
[ 39.661] (WW) evdev: HDA Intel MID HDMI/DP,pcm=7: Don't know how to use device
[ 39.671] (EE) PreInit returned 8 for "HDA Intel MID HDMI/DP,pcm=7"
[ 39.671] (II) UnloadModule: "evdev"
[ 39.671] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event12)
[ 39.671] (**) HDA Intel MID HDMI/DP,pcm=8: Applying InputClass "keyboard-all"
[ 39.671] (II) Using input driver 'evdev' for 'HDA Intel MID HDMI/DP,pcm=8'
[ 39.671] (**) HDA Intel MID HDMI/DP,pcm=8: always reports core events
[ 39.671] (**) evdev: HDA Intel MID HDMI/DP,pcm=8: Device: "/dev/input/event12"
[ 39.671] (--) evdev: HDA Intel MID HDMI/DP,pcm=8: Vendor 0 Product 0
[ 39.671] (WW) evdev: HDA Intel MID HDMI/DP,pcm=8: Don't know how to use device
[ 39.681] (EE) PreInit returned 8 for "HDA Intel MID HDMI/DP,pcm=8"
[ 39.681] (II) UnloadModule: "evdev"
[ 39.681] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event7)
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev keyboard catchall"
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "keyboard-all"
[ 39.681] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 39.681] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event7"
[ 39.681] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Vendor 0x45e Product 0x7a5
[ 39.681] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found keys
[ 39.681] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as keyboard
[ 39.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9/event7"
[ 39.681] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.1" (type: KEYBOARD, id 10)
[ 39.681] (**) Option "xkb_rules" "evdev"
[ 39.681] (**) Option "xkb_model" "pc104"
[ 39.681] (**) Option "xkb_layout" "pl"
[ 39.681] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event8)
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev pointer catchall"
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "keyboard-all"
[ 39.681] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 39.681] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 39.681] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event8"
[ 39.691] (EE) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Unable to open evdev device "/dev/input/event8".
[ 39.691] (EE) PreInit returned 2 for "Microsoft Microsoft® Nano Transceiver v2.1"
[ 39.691] (II) UnloadModule: "evdev"
[ 39.691] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/mouse2)
[ 39.691] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "keyboard-all"
[ 39.691] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 39.691] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 39.691] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/mouse2"
[ 39.701] (EE) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Unable to open evdev device "/dev/input/mouse2".
[ 39.701] (EE) PreInit returned 2 for "Microsoft Microsoft® Nano Transceiver v2.1"
[ 39.701] (II) UnloadModule: "evdev"
[ 39.701] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event9)
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev keyboard catchall"
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "keyboard-all"
[ 39.701] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 39.701] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event9"
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Using mtdev for this device
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Vendor 0x45e Product 0x7a5
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found 1 mouse buttons
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found scroll wheel(s)
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found relative axes
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found absolute axes
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found absolute multitouch axes
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found x and y absolute axes
[ 39.701] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found keys
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Forcing relative x/y axes to exist.
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as mouse
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as keyboard
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Adding scrollwheel support
[ 39.701] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: YAxisMapping: buttons 4 and 5
[ 39.701] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input11/event9"
[ 39.701] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.1" (type: KEYBOARD, id 11)
[ 39.701] (**) Option "xkb_rules" "evdev"
[ 39.701] (**) Option "xkb_model" "pc104"
[ 39.701] (**) Option "xkb_layout" "pl"
[ 39.701] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: initialized for relative axes.
[ 39.701] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.1: ignoring absolute axes.
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) keeping acceleration scheme 1
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration profile 0
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration factor: 2.000
[ 39.701] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration threshold: 4
[ 39.702] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 39.702] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 39.702] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 39.702] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 39.702] (**) AT Translated Set 2 keyboard: always reports core events
[ 39.702] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 39.702] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 39.702] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 39.702] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 39.702] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 39.702] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 39.702] (**) Option "xkb_rules" "evdev"
[ 39.702] (**) Option "xkb_model" "pc104"
[ 39.702] (**) Option "xkb_layout" "pl"
[ 39.702] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 39.702] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 39.702] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 39.702] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 39.702] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "keyboard-all"
[ 39.702] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "synaptics-all"
[ 39.702] (II) LoadModule: "synaptics"
[ 39.702] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 39.715] (II) Module synaptics: vendor="X.Org Foundation"
[ 39.715] compiled for 1.15.0, module version = 1.7.3
[ 39.716] Module class: X.Org XInput Driver
[ 39.716] ABI class: X.Org XInput driver, version 20.0
[ 39.716] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 39.716] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 39.716] (**) Option "Device" "/dev/input/event6"
[ 39.739] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 39.739] (**) Option "EmulateTwoFingerMinW" "50"
[ 39.739] (**) Option "VertEdgeScroll" "false"
[ 39.739] (**) Option "HorizEdgeScroll" "true"
[ 39.739] (**) Option "CornerCoasting" "false"
[ 39.739] (**) Option "VertTwoFingerScroll" "false"
[ 39.739] (**) Option "HorizTwoFingerScroll" "false"
[ 39.739] (**) Option "CircularScrolling" "false"
[ 39.739] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 39.739] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 39.749] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 39.749] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 39.749] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 39.749] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 39.749] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 39.749] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 39.749] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 39.749] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 39.749] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 39.749] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 39.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 39.750] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 39.750] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 39.750] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 39.750] (**) TPPS/2 IBM TrackPoint: Applying InputClass "keyboard-all"
[ 39.750] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 39.750] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 39.750] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 39.750] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 39.750] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 39.750] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 39.750] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 39.750] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 39.750] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 39.750] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input8/event10"
[ 39.751] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 39.751] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 39.751] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 39.751] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 39.751] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 39.751] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 39.751] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 39.751] (**) TPPS/2 IBM TrackPoint: Applying InputClass "keyboard-all"
[ 39.751] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 39.751] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 39.751] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/mouse3"
[ 39.752] (EE) evdev: TPPS/2 IBM TrackPoint: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[ 39.752] (EE) TPPS/2 IBM TrackPoint: Couldn't open mtdev device
[ 39.763] (EE) PreInit returned 2 for "TPPS/2 IBM TrackPoint"
[ 39.763] (II) UnloadModule: "evdev"
[ 39.763] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 39.763] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 39.763] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-all"
[ 39.763] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 39.763] (**) ThinkPad Extra Buttons: always reports core events
[ 39.763] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 39.763] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 39.763] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 39.763] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 39.763] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 39.763] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 39.763] (**) Option "xkb_rules" "evdev"
[ 39.763] (**) Option "xkb_model" "pc104"
[ 39.764] (**) Option "xkb_layout" "pl"
[ 53.875] (II) intel(0): EDID vendor "LEN", prod id 16438
[ 53.875] (II) intel(0): Printing DDC gathered Modelines:
[ 53.875] (II) intel(0): Modeline "1440x900"x0.0 114.06 1440 1488 1520 2044 900 903 909 930 -hsync -vsync (55.8 kHz eP)
[ 53.875] (II) intel(0): Modeline "1440x900"x0.0 114.06 1440 1488 1520 2204 900 903 909 1035 -hsync -vsync (51.8 kHz e)
[ 54.623] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 91.073] (II) config/udev: Adding input device Apple Magic Mouse (/dev/input/mouse4)
[ 91.073] (**) Apple Magic Mouse: Applying InputClass "keyboard-all"
[ 91.073] (II) Using input driver 'evdev' for 'Apple Magic Mouse'
[ 91.073] (**) Apple Magic Mouse: always reports core events
[ 91.073] (**) evdev: Apple Magic Mouse: Device: "/dev/input/mouse4"
[ 91.073] (EE) evdev: Apple Magic Mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[ 91.074] (EE) Apple Magic Mouse: Couldn't open mtdev device
[ 91.090] (EE) PreInit returned 2 for "Apple Magic Mouse"
[ 91.090] (II) UnloadModule: "evdev"
[ 91.090] (II) config/udev: Adding input device Apple Magic Mouse (/dev/input/event20)
[ 91.090] (**) Apple Magic Mouse: Applying InputClass "evdev pointer catchall"
[ 91.090] (**) Apple Magic Mouse: Applying InputClass "keyboard-all"
[ 91.090] (II) Using input driver 'evdev' for 'Apple Magic Mouse'
[ 91.090] (**) Apple Magic Mouse: always reports core events
[ 91.090] (**) evdev: Apple Magic Mouse: Device: "/dev/input/event20"
[ 91.090] (II) evdev: Apple Magic Mouse: Using mtdev for this device
[ 91.090] (--) evdev: Apple Magic Mouse: Vendor 0x5ac Product 0x30d
[ 91.090] (--) evdev: Apple Magic Mouse: Found 3 mouse buttons
[ 91.090] (--) evdev: Apple Magic Mouse: Found scroll wheel(s)
[ 91.090] (--) evdev: Apple Magic Mouse: Found relative axes
[ 91.090] (--) evdev: Apple Magic Mouse: Found x and y relative axes
[ 91.090] (--) evdev: Apple Magic Mouse: Found absolute axes
[ 91.090] (--) evdev: Apple Magic Mouse: Found absolute multitouch axes
[ 91.090] (II) evdev: Apple Magic Mouse: Configuring as mouse
[ 91.090] (II) evdev: Apple Magic Mouse: Adding scrollwheel support
[ 91.091] (**) evdev: Apple Magic Mouse: YAxisMapping: buttons 4 and 5
[ 91.091] (**) evdev: Apple Magic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 91.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input21/event20"
[ 91.091] (II) XINPUT: Adding extended input device "Apple Magic Mouse" (type: MOUSE, id 16)
[ 91.091] (II) evdev: Apple Magic Mouse: initialized for relative axes.
[ 91.091] (WW) evdev: Apple Magic Mouse: ignoring absolute axes.
[ 91.091] (**) Apple Magic Mouse: (accel) keeping acceleration scheme 1
[ 91.092] (**) Apple Magic Mouse: (accel) acceleration profile 0
[ 91.092] (**) Apple Magic Mouse: (accel) acceleration factor: 2.000
[ 91.092] (**) Apple Magic Mouse: (accel) acceleration threshold: 4

[Keruskerfuerst]

Take a look at the messages with (EE) in the xorg.log.

[gentoo2x]

Hi,


Thank you for your answer. I've unplugged all my devices (mouse, keyboard, and Monitor). Current Xorg.0.log has no (EE), gnome load time takes 40 seconds still

It is i7 core processor with Intel 5700MHD grapthics.

cat /var/log/Xorg.0.log
[ 28.227]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 28.228] X Protocol Version 11, Revision 0
[ 28.228] Build Operating System: Linux 3.7.1 x86_64 Gentoo
[ 28.228] Current Operating System: Linux thinkpad 3.13.6 #1 SMP Sat Mar 22 14:30:59 CET 2014 x86_64
[ 28.228] Kernel command line: root=/dev/sda5 raid=noautodetect
[ 28.228] Build Date: 19 February 2014 08:50:35PM
[ 28.228]
[ 28.228] Current version of pixman: 0.32.4
[ 28.228] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.228] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.276] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 23 21:41:35 2014
[ 28.386] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.386] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.429] (==) No Layout section. Using the first Screen section.
[ 28.429] (==) No screen section available. Using defaults.
[ 28.429] (**) |-->Screen "Default Screen Section" (0)
[ 28.429] (**) | |-->Monitor "<default monitor>"
[ 28.429] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 28.429] (**) | |-->Device "Intel HMA HD"
[ 28.429] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.429] (==) Automatically adding devices
[ 28.429] (==) Automatically enabling devices
[ 28.429] (==) Automatically adding GPU devices
[ 28.519] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 28.519] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 28.519] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.527] (II) Loader magic: 0x603c60
[ 28.527] (II) Module ABI versions:
[ 28.527] X.Org ANSI C Emulation: 0.4
[ 28.527] X.Org Video Driver: 15.0
[ 28.527] X.Org XInput driver : 20.0
[ 28.527] X.Org Server Extension : 8.0
[ 28.527] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 28.530] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 28.537] Initializing built-in extension Generic Event Extension
[ 28.537] Initializing built-in extension SHAPE
[ 28.537] Initializing built-in extension MIT-SHM
[ 28.537] Initializing built-in extension XInputExtension
[ 28.537] Initializing built-in extension XTEST
[ 28.537] Initializing built-in extension BIG-REQUESTS
[ 28.537] Initializing built-in extension SYNC
[ 28.537] Initializing built-in extension XKEYBOARD
[ 28.537] Initializing built-in extension XC-MISC
[ 28.537] Initializing built-in extension XINERAMA
[ 28.537] Initializing built-in extension XFIXES
[ 28.537] Initializing built-in extension RENDER
[ 28.537] Initializing built-in extension RANDR
[ 28.538] Initializing built-in extension COMPOSITE
[ 28.538] Initializing built-in extension DAMAGE
[ 28.538] Initializing built-in extension MIT-SCREEN-SAVER
[ 28.538] Initializing built-in extension DOUBLE-BUFFER
[ 28.540] Initializing built-in extension RECORD
[ 28.542] Initializing built-in extension DPMS
[ 28.545] Initializing built-in extension Present
[ 28.547] Initializing built-in extension DRI3
[ 28.549] Initializing built-in extension X-Resource
[ 28.551] Initializing built-in extension XVideo
[ 28.553] Initializing built-in extension XVideo-MotionCompensation
[ 28.555] Initializing built-in extension XFree86-VidModeExtension
[ 28.558] Initializing built-in extension XFree86-DGA
[ 28.560] Initializing built-in extension XFree86-DRI
[ 28.562] Initializing built-in extension DRI2
[ 28.562] (II) "glx" will be loaded by default.
[ 28.562] (II) LoadModule: "dri2"
[ 28.562] (II) Module "dri2" already built-in
[ 28.562] (II) LoadModule: "glamoregl"
[ 28.592] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 28.921] (II) Module glamoregl: vendor="X.Org Foundation"
[ 28.921] compiled for 1.15.0, module version = 0.6.0
[ 28.921] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.921] (II) LoadModule: "glx"
[ 29.061] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 29.073] (II) Module glx: vendor="X.Org Foundation"
[ 29.073] compiled for 1.15.0, module version = 1.0.0
[ 29.073] ABI class: X.Org Server Extension, version 8.0
[ 29.073] (==) AIGLX enabled
[ 29.075] Loading extension GLX
[ 29.075] (II) LoadModule: "intel"
[ 29.075] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 29.123] (II) Module intel: vendor="X.Org Foundation"
[ 29.123] compiled for 1.15.0, module version = 2.99.910
[ 29.123] Module class: X.Org Video Driver
[ 29.123] ABI class: X.Org Video Driver, version 15.0
[ 29.123] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 29.124] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 29.124] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 29.124] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 29.124] (--) using VT number 2

[ 29.157] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 29.157] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 29.157] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.157] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.157] (==) intel(0): RGB weight 888
[ 29.157] (==) intel(0): Default visual is TrueColor
[ 29.157] (**) intel(0): Option "AccelMethod" "sna"
[ 29.158] (**) intel(0): Framebuffer tiled
[ 29.158] (**) intel(0): Pixmaps tiled
[ 29.158] (**) intel(0): "Tear free" disabled
[ 29.158] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 29.158] (II) intel(0): Output LVDS1 has no monitor section
[ 29.158] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 29.158] (II) intel(0): Output VGA1 has no monitor section
[ 29.158] (II) intel(0): Output HDMI1 has no monitor section
[ 29.158] (II) intel(0): Output DP1 has no monitor section
[ 29.158] (II) intel(0): Output HDMI2 has no monitor section
[ 29.158] (II) intel(0): Output HDMI3 has no monitor section
[ 29.158] (II) intel(0): Output DP2 has no monitor section
[ 29.159] (II) intel(0): Output DP3 has no monitor section
[ 29.159] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 29.159] (--) intel(0): Output LVDS1 using initial mode 1440x900 on pipe 0
[ 29.159] (==) intel(0): DPI set to (96, 96)
[ 29.159] (II) Loading sub module "dri2"
[ 29.159] (II) LoadModule: "dri2"
[ 29.159] (II) Module "dri2" already built-in
[ 29.159] (==) Depth 24 pixmap format is 32 bpp
[ 29.184] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 29.184] (==) intel(0): Backing store enabled
[ 29.184] (==) intel(0): Silken mouse enabled
[ 29.184] (II) intel(0): HW Cursor enabled
[ 29.184] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.187] (==) intel(0): DPMS enabled
[ 29.187] (II) intel(0): [DRI2] Setup complete
[ 29.187] (II) intel(0): [DRI2] DRI driver: i965
[ 29.187] (II) intel(0): [DRI2] VDPAU driver: i965
[ 29.187] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.187] (==) intel(0): hotplug detection: "enabled"
[ 29.187] (--) RandR disabled
[ 29.396] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 29.396] (II) AIGLX: enabled GLX_ARB_create_context
[ 29.396] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 29.396] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 29.396] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 29.396] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 29.396] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 29.396] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 29.396] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 29.397] (II) AIGLX: Loaded and initialized i965
[ 29.397] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.421] (II) intel(0): switch to mode 1440x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 29.434] (II) intel(0): Setting screen physical size to 381 x 238
[ 29.999] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 29.999] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.999] (II) LoadModule: "evdev"
[ 29.999] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 30.041] (II) Module evdev: vendor="X.Org Foundation"
[ 30.041] compiled for 1.15.0, module version = 2.8.2
[ 30.041] Module class: X.Org XInput Driver
[ 30.041] ABI class: X.Org XInput driver, version 20.0
[ 30.041] (II) Using input driver 'evdev' for 'Power Button'
[ 30.041] (**) Power Button: always reports core events
[ 30.041] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 30.042] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.042] (--) evdev: Power Button: Found keys
[ 30.042] (II) evdev: Power Button: Configuring as keyboard
[ 30.042] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 30.042] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.042] (**) Option "xkb_rules" "evdev"
[ 30.042] (**) Option "xkb_model" "pc104"
[ 30.042] (**) Option "xkb_layout" "us"
[ 30.084] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 30.084] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.084] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.084] (**) Video Bus: always reports core events
[ 30.084] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 30.084] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.084] (--) evdev: Video Bus: Found keys
[ 30.084] (II) evdev: Video Bus: Configuring as keyboard
[ 30.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15"
[ 30.084] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.084] (**) Option "xkb_rules" "evdev"
[ 30.084] (**) Option "xkb_model" "pc104"
[ 30.084] (**) Option "xkb_layout" "us"
[ 30.085] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 30.085] (II) No input driver specified, ignoring this device.
[ 30.085] (II) This device may have been added with another device file.
[ 30.085] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 30.085] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.085] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.085] (**) Sleep Button: always reports core events
[ 30.085] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 30.085] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.085] (--) evdev: Sleep Button: Found keys
[ 30.085] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.085] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 30.085] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 30.085] (**) Option "xkb_rules" "evdev"
[ 30.085] (**) Option "xkb_model" "pc104"
[ 30.085] (**) Option "xkb_layout" "us"
[ 30.086] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 30.087] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 30.087] (II) No input driver specified, ignoring this device.
[ 30.087] (II) This device may have been added with another device file.
[ 30.087] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event13)
[ 30.087] (II) No input driver specified, ignoring this device.
[ 30.087] (II) This device may have been added with another device file.
[ 30.088] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event12)
[ 30.088] (II) No input driver specified, ignoring this device.
[ 30.088] (II) This device may have been added with another device file.
[ 30.088] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11)
[ 30.088] (II) No input driver specified, ignoring this device.
[ 30.088] (II) This device may have been added with another device file.
[ 30.088] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event10)
[ 30.088] (II) No input driver specified, ignoring this device.
[ 30.088] (II) This device may have been added with another device file.
[ 30.089] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event9)
[ 30.089] (II) No input driver specified, ignoring this device.
[ 30.089] (II) This device may have been added with another device file.
[ 30.089] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event8)
[ 30.089] (II) No input driver specified, ignoring this device.
[ 30.089] (II) This device may have been added with another device file.
[ 30.090] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event14)
[ 30.090] (II) No input driver specified, ignoring this device.
[ 30.090] (II) This device may have been added with another device file.
[ 30.090] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 30.090] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.090] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.090] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.090] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 30.090] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.090] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.090] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.090] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 30.090] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 30.090] (**) Option "xkb_rules" "evdev"
[ 30.090] (**) Option "xkb_model" "pc104"
[ 30.090] (**) Option "xkb_layout" "us"
[ 30.091] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 30.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 30.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 30.091] (II) LoadModule: "synaptics"
[ 30.091] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 30.103] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.103] compiled for 1.15.0, module version = 1.7.3
[ 30.103] Module class: X.Org XInput Driver
[ 30.103] ABI class: X.Org XInput driver, version 20.0
[ 30.103] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 30.103] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.103] (**) Option "Device" "/dev/input/event5"
[ 30.123] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 30.123] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 30.123] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.133] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 30.133] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 30.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 30.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 30.133] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 30.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 30.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 30.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 30.133] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 30.134] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 30.134] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.134] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 30.134] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 30.134] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 30.134] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 30.134] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 30.134] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 30.134] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 30.134] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 30.134] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 30.134] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 30.134] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 30.134] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.134] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event6"
[ 30.134] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[ 30.135] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 30.135] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 30.135] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 30.135] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 30.135] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 30.135] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 30.135] (II) No input driver specified, ignoring this device.
[ 30.135] (II) This device may have been added with another device file.
[ 30.136] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 30.136] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 30.136] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 30.136] (**) ThinkPad Extra Buttons: always reports core events
[ 30.136] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 30.136] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 30.136] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 30.136] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 30.136] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 30.136] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[ 30.136] (**) Option "xkb_rules" "evdev"
[ 30.136] (**) Option "xkb_model" "pc104"
[ 30.136] (**) Option "xkb_layout" "us"
[ 44.537] (II) intel(0): EDID vendor "LEN", prod id 16438
[ 44.537] (II) intel(0): Printing DDC gathered Modelines:
[ 44.537] (II) intel(0): Modeline "1440x900"x0.0 114.06 1440 1488 1520 2044 900 903 909 930 -hsync -vsync (55.8 kHz eP)
[ 44.537] (II) intel(0): Modeline "1440x900"x0.0 114.06 1440 1488 1520 2204 900 903 909 1035 -hsync -vsync (51.8 kHz e)

[Keruskerfuerst]

Are you using the autoconfiguration of Xorg or are you using a xorg.conf in /etc/* ?

[gentoo2x]

Hi,

I've tried both. No difference. Time is always about 42-43 seconds.

How long is your Gnome loading start time after reboot?

[gentoo2x]

Could anyone provide what is your Gnome start up time?

[aCOSwt]

Moved from Multimedia to Desktop Environments. (beandog's request)
_________________

[lyallp]

Just a couple of problem solving questions.

It's as though the Intel video is having problems communicating with your monitor to determine its capabilities.

Have you tried re-seating the video cable or even replacing it?

Is it only Gnome that has problems or does some other window manager have the same issues?

Is the machine Dual boot to windows? If so, does windows take a long time to 'boot' too?

What about the gentoo install CD, does that take ages to boot into graphical mode?
_________________
...Lyall

[jhon987]

[jhon987]

This is when /var/log/journal is not renamed

[TomWij]

The explanation to this might be visible in the output of the command `dmesg` or the output of the command `journalctl -rb`

[jhon987]

[TomWij]

[jhon987]

[ulenrich]

startx
cannot initialize any of logind, which is part of systemd. Because Gnome is not in any way configured to run without systemd (Gentoo maintainers follow a cosy and lazy approach here), it is probably timing out any systemd related expectation.

Also it is stated by systemd upstream they don't want to support "startx" in the near future any more. An alternative is to use a cheap DM replacement such as no-dm, but this is dead now. There is a similar project I have forgotten the name on github.

[TomWij]

Hmm, right; `startx` used to work in 3.6 / 3.8 era, I haven't needed it since and it indeed appears to have regressed. Is nodm still usable besides it being dead?

[gentoo2x]

Hi,

I don't have /var/log/journal or /var/log/journal.org
I created journal.org by:
touch /var/log/journal.org

but it did not help.

As I said, it is only Gnome that load so slow, and only at first start after computer start. If I exit from gnome to console and start gnome again it starts in 3 seconds! Besides fluxbox starts in 3 seconds even after restart or fresh start.
I have dual boot with Windows 7 but windows starts in normal time.

Any other suggestions?

[TomWij]

[gentoo2x]

This is output from journalctl -rb


mar 29 18:23:44 thinkpad gnome-session[552]: (tracker-store:866): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
mar 29 18:23:41 thinkpad gnome-session[552]: Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
mar 29 18:23:40 thinkpad gnome-session[552]: Entering running state
mar 29 18:23:38 thinkpad gnome-session[552]: Failed to play sound: File or data not found
mar 29 18:23:37 thinkpad colord[669]: Device added: xrandr-Lenovo Group Limited
mar 29 18:23:37 thinkpad colord[669]: Automatic metadata add icc-fac02a0c0024f281cd6a1a526150dd66 to xrandr-Lenovo Group Limited
mar 29 18:23:37 thinkpad colord[669]: Device added: xrandr-Hewlett Packard-HP 23xi-3CM2520552
mar 29 18:23:37 thinkpad colord[669]: Automatic metadata add icc-0927a0a40a2744272e8a7d8bb72d1ba7 to xrandr-Hewlett Packard-HP 23xi-3CM2520552
mar 29 18:23:37 thinkpad gnome-session[552]: Gjs-Message: JS LOG: GNOME Shell started at Sat Mar 29 2014 18:23:37 GMT+0100 (CET)
mar 29 18:23:37 thinkpad goa[819]: goa-daemon version 3.10.2 starting [main.c:117, main()]
mar 29 18:23:36 thinkpad systemd[1]: Started Disk Manager.
mar 29 18:23:36 thinkpad udisksd[825]: Acquired the name org.freedesktop.UDisks2 on the system message bus
mar 29 18:23:36 thinkpad dbus[313]: [system] Successfully activated service 'org.freedesktop.UDisks2'
mar 29 18:23:36 thinkpad dbus-daemon[313]: dbus[313]: [system] Successfully activated service 'org.freedesktop.UDisks2'
mar 29 18:23:36 thinkpad udisksd[825]: udisks daemon version 2.1.0 starting
mar 29 18:23:36 thinkpad systemd[1]: Starting Disk Manager...
mar 29 18:23:36 thinkpad dbus[313]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
mar 29 18:23:36 thinkpad dbus-daemon[313]: dbus[313]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
mar 29 18:23:35 thinkpad polkitd[408]: Registered Authentication Agent for unix-session:1 (system bus name :1.24 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale pl_PL.
mar 29 18:23:21 thinkpad systemd[1]: Started Locale Service.
mar 29 18:23:21 thinkpad dbus[313]: [system] Successfully activated service 'org.freedesktop.locale1'
mar 29 18:23:21 thinkpad dbus-daemon[313]: dbus[313]: [system] Successfully activated service 'org.freedesktop.locale1'
mar 29 18:23:21 thinkpad colord[669]: Profile added: icc-0927a0a40a2744272e8a7d8bb72d1ba7
mar 29 18:23:21 thinkpad colord[669]: Profile added: icc-fac02a0c0024f281cd6a1a526150dd66
mar 29 18:23:21 thinkpad systemd[1]: Starting Locale Service...
mar 29 18:23:21 thinkpad dbus[313]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
mar 29 18:23:21 thinkpad dbus-daemon[313]: dbus[313]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
mar 29 18:23:21 thinkpad colord[669]: Device added: sysfs-Chicony_Electronics_Co.__Ltd.-Integrated_Camera
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-ad7193fc500778fbd3714471fcee076f
mar 29 18:23:20 thinkpad colord[669]: (colord:669): libcolord-WARNING **: lcms2(profile): Failed with error: Corrupted tag 'meta' [12]
mar 29 18:23:20 thinkpad colord[669]: (colord:669): libcolord-WARNING **: lcms2(profile): Failed with error: Bad dictionary Name/Value [12]
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-a5f10846975eeb751fd90b1d6512e852
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-b3c2473bb2ab503334ccb0c38a1a7778
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-e71517d256c444eb75fca0375dea4e5a
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-7c840f5d113af75c9b2544f95cf94728
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-83c9227cee43e657a58674804fe00278
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-1e5ad2ecb3ad689bc88adc29de09c7ba
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-e873ad108de4ef37f2f6e9a77fe5204d
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-366bb0a3101f6341aa22107c36a282c7
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-5fe73ea8e1711173ecf046a414b358b0
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-1f45c3fed247b0713c7afa57c09e8f84
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-0948af7e067817c24555e1b061718b44
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-fdfdf1022b23440abcd5b7331cf02a55
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-5ee4438fecdd8837531e73605f42394c
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-8b2bebf25c11d0ffb49c33056544b98e
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-fdc99ad017032e7e0673db706d165f76
mar 29 18:23:20 thinkpad colord[669]: (colord:669): libcolord-WARNING **: lcms2(profile): Failed with error: Corrupted tag 'meta' [12]
mar 29 18:23:20 thinkpad colord[669]: (colord:669): libcolord-WARNING **: lcms2(profile): Failed with error: Bad dictionary Name/Value [12]
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-0a91d97691639c980c16364f630f9c1f
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-5b605be32b278d8e91dcdb94462ac27f
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-72b87d4a35db3384a8129c0cb731af4c
mar 29 18:23:20 thinkpad colord[669]: Profile added: icc-955ffdfc2d370c411b62cbfc653ad7a5

[TomWij]

Hmm, sorry, there are multiple topics going on about this subject; I've missed reading the delay in the Xorg.0.log in this case.

As can be seen, the `journalctl -rb` doesn't really tell anything:

[gentoo2x]

thinkpad ~ # dmesg | grep intel
[ 0.131381] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.427130] intel_idle: MWAIT substates: 0x1120
[ 0.427131] intel_idle: v0.4 model 0x25
[ 0.427132] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.711432] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 0.712510] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 0.714344] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 8.148018] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 8.148232] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.149205] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 8.149475] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.301859] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 10.072430] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.915314] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo

dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.6 (root@thinkpad) (gcc version 4.7.3 (Gentoo 4.7.3 p1.1, pie-0.5.5) ) #2 SMP Fri Mar 28 13:07:17 CET 2014
[ 0.000000] Command line: root=/dev/sda5 raid=noautodetect
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 2516CTO/2516CTO, BIOS 6IET68WW (1.28 ) 07/12/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f68b0-0x000f68bf] mapped at [ffff8800000f68b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01edf000, 0x01edffff] PGTABLE
[ 0.000000] BRK [0x01ee0000, 0x01ee0fff] PGTABLE
[ 0.000000] BRK [0x01ee1000, 0x01ee1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01ee2000, 0x01ee2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[ 0.000000] [mem 0x134000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[ 0.000000] [mem 0x100000000-0x133ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[ 0.000000] [mem 0xbb282000-0xbb35efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] [mem 0xbb40f000-0xbb46efff] page 4k
[ 0.000000] BRK [0x01ee3000, 0x01ee3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] [mem 0xbb70f000-0xbb716fff] page 4k
[ 0.000000] BRK [0x01ee4000, 0x01ee4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb76afff]
[ 0.000000] [mem 0xbb71f000-0xbb76afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] [mem 0xbb7ff000-0xbb7fffff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f6870 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bb7ef338 00009C (v01 LENOVO TP-6I 00001280 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bb7ef400 0000F4 (v04 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bb7ef7d1 00F2F8 (v01 LENOVO TP-6I 00001280 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bb6e7000 000040
[ 0.000000] ACPI: SSDT 00000000bb7ef5b4 00021D (v01 LENOVO TP-6I 00001280 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bb7feac9 000052 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bb7feb1b 000084 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bb7febd7 00003C (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bb7fec13 000038 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bb7fedbe 0000A4 (v16 LENOVO TP-6I 00001280 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bb7fee62 000176 (v01 LENOVO TP-6I 00001280 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bb7fefd8 000028 (v01 LENOVO TP-6I 00001280 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bb6e591a 00084B (v01 LENOVO TP-6I 00001280 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bb78b000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 00000000bb781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bb779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bb778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bb777000 00049F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[ 0.000000] NODE_DATA [mem 0x137ff9000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb27bfff]
[ 0.000000] node 0: [mem 0xbb282000-0xbb35efff]
[ 0.000000] node 0: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] node 0: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] node 0: [mem 0xbb71f000-0xbb76afff]
[ 0.000000] node 0: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x137ffffff]
[ 0.000000] On node 0 totalpages: 996267
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s79040 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s79040 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 980677
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 raid=noautodetect
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3839644K/3985068K available (7188K kernel code, 814K rwdata, 3748K rodata, 1076K init, 1016K bss, 145424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2660.128 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.25 BogoMIPS (lpj=2660128)
[ 0.000241] pid_max: default: 32768 minimum: 301
[ 0.000378] Security Framework initialized
[ 0.002438] SELinux: Initializing.
[ 0.002559] SELinux: Starting in permissive mode
[ 0.002785] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003989] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004553] Mount-cache hash table entries: 256
[ 0.004852] Initializing cgroup subsys freezer
[ 0.005004] CPU: Physical Processor ID: 0
[ 0.005120] CPU: Processor Core ID: 0
[ 0.005239] mce: CPU supports 9 MCE banks
[ 0.005363] CPU0: Thermal monitoring enabled (TM1)
[ 0.005490] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.005856] Freeing SMP alternatives memory: 20K (ffffffff81dda000 - ffffffff81ddf000)
[ 0.006061] ACPI: Core revision 20131115
[ 0.011351] ACPI: All ACPI Tables successfully acquired
[ 0.019312] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.029456] smpboot: CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.130985] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.131381] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.131526] ... version: 3
[ 0.131660] ... bit width: 48
[ 0.131793] ... generic registers: 4
[ 0.131927] ... value mask: 0000ffffffffffff
[ 0.132068] ... max period: 000000007fffffff
[ 0.132207] ... fixed-purpose events: 3
[ 0.132340] ... event mask: 000000070000000f
[ 0.132714] x86: Booting SMP configuration:
[ 0.132850] .... node #0, CPUs: #1 #2 #3
[ 0.173041] x86: Booted up 1 node, 4 CPUs
[ 0.173301] smpboot: Total of 4 processors activated (21281.02 BogoMIPS)
[ 0.175467] devtmpfs: initialized
[ 0.175811] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.176053] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.176292] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.176519] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.176746] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.176973] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.177393] RTC time: 18:22:35, date: 03/29/14
[ 0.177571] NET: Registered protocol family 16
[ 0.177811] cpuidle: using governor ladder
[ 0.177946] cpuidle: using governor menu
[ 0.178117] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.178343] ACPI: bus type PCI registered
[ 0.178527] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.178762] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.201268] PCI: Using configuration type 1 for base access
[ 0.202736] bio: create slab <bio-0> at 0
[ 0.202961] ACPI: Added _OSI(Module Device)
[ 0.203100] ACPI: Added _OSI(Processor Device)
[ 0.203235] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.203372] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204643] ACPI : EC: EC description table is found, configuring boot EC
[ 0.208626] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.285619] ACPI: SSDT 00000000bb71a598 0004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.286203] ACPI: Dynamic OEM Table Load:
[ 0.286420] ACPI: SSDT (null) 0004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.286816] ACPI: SSDT 00000000bb718718 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.287410] ACPI: Dynamic OEM Table Load:
[ 0.287626] ACPI: SSDT (null) 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.293250] ACPI: SSDT 00000000bb719a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.293874] ACPI: Dynamic OEM Table Load:
[ 0.294091] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.297130] ACPI: SSDT 00000000bb717d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.297718] ACPI: Dynamic OEM Table Load:
[ 0.297934] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.302541] ACPI: Interpreter enabled
[ 0.302681] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.302995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.303321] ACPI: (supports S0 S3 S4 S5)
[ 0.303455] ACPI: Using IOAPIC for interrupt routing
[ 0.303611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.304494] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.311932] ACPI: Power Resource [PUBS] (on)
[ 0.317486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.318117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.318726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.319515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320768] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321375] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.322167] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322747] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.322892] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.323123] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.323294] PCI host bridge to bus 0000:ff
[ 0.323430] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.323576] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.323612] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.323646] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.323678] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.323707] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.323736] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.323785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.323928] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.324311] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.324527] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.324762] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.324987] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.325213] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.325418] PCI host bridge to bus 0000:00
[ 0.325554] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.325696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.325838] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.325981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.326126] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.326271] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.326416] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.326565] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.326624] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.326634] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.326639] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.326643] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.326739] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.326767] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.326858] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.326923] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.326946] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.326957] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.327115] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.327140] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.327151] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.327162] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.327249] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.327287] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.327462] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.327486] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.327593] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.327631] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.327807] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.327828] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.327922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.327964] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.328136] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.328233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.328273] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.328442] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.328539] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.328580] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.328753] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.328850] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.328891] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.329060] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.329158] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.329199] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.329375] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.329399] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.329505] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.329543] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.329711] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.329829] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.329988] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.330015] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.330026] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.330037] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.330048] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.330059] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.330070] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.330136] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.330196] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.330217] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.330246] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.330327] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.330355] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.330541] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.330768] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.330784] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.330796] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.330894] pci 0000:03:00.0: supports D1 D2
[ 0.330895] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.332681] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.332831] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.332836] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.332904] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.333046] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.333051] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.333058] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.333188] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.333205] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.333418] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.333576] pci 0000:0d:00.0: supports D1 D2
[ 0.333578] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333696] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.333719] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.333877] pci 0000:0d:00.1: supports D1 D2
[ 0.333878] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333993] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.334015] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.334174] pci 0000:0d:00.3: supports D1 D2
[ 0.334176] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.336746] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.336895] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.336975] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.337130] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.337132] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.337134] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.337136] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.337138] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.337140] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.338626] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.338855] ACPI: \_SB_.UNCR: notify handler is installed
[ 0.338857] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.338887] Found 2 acpi root devices
[ 0.338935] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.339153] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.339383] vgaarb: loaded
[ 0.339512] vgaarb: bridge control possible 0000:00:02.0
[ 0.339754] SCSI subsystem initialized
[ 0.339924] libata version 3.00 loaded.
[ 0.339945] ACPI: bus type USB registered
[ 0.340094] usbcore: registered new interface driver usbfs
[ 0.340240] usbcore: registered new interface driver hub
[ 0.340397] usbcore: registered new device driver usb
[ 0.340548] media: Linux media interface: v0.10
[ 0.340692] Linux video capture interface: v2.00
[ 0.340832] pps_core: LinuxPPS API ver. 1 registered
[ 0.340969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.341203] PTP clock support registered
[ 0.341394] PCI: Using ACPI for IRQ routing
[ 0.351267] PCI: pci_cache_line_size set to 64 bytes
[ 0.351429] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.351431] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.351434] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.351436] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.351438] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.351440] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.351442] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.351521] Bluetooth: Core ver 2.17
[ 0.351663] NET: Registered protocol family 31
[ 0.351799] Bluetooth: HCI device and connection manager initialized
[ 0.351943] Bluetooth: HCI socket layer initialized
[ 0.352081] Bluetooth: L2CAP socket layer initialized
[ 0.352221] Bluetooth: SCO socket layer initialized
[ 0.352360] NET: Registered protocol family 8
[ 0.352495] NET: Registered protocol family 20
[ 0.352699] cfg80211: Calling CRDA to update world regulatory domain
[ 0.352843] NetLabel: Initializing
[ 0.352976] NetLabel: domain hash size = 128
[ 0.353114] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.353264] NetLabel: unlabeled traffic allowed by default
[ 0.353482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.353989] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.356157] Switched to clocksource hpet
[ 0.361027] pnp: PnP ACPI init
[ 0.363644] ACPI: bus type PNP registered
[ 0.364906] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.365053] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.365207] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.365352] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.365496] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.365640] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.365785] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.365931] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.366076] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.366227] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.366373] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.366518] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.366664] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.366810] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.366956] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.367103] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.367415] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.367558] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.367701] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.367844] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.367986] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.368127] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.368278] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.368421] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.368565] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.368708] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.368853] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.368997] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.369142] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.369292] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.369437] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369477] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.369486] pnp 00:03: [dma 4]
[ 0.369498] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.369515] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.369546] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.369568] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.369589] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.369610] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.369887] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.370701] pnp: PnP ACPI: found 10 devices
[ 0.370836] ACPI: bus type PNP unregistered
[ 0.377429] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.377580] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.377720] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.377867] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.378018] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.378166] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.378312] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.378459] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.378692] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.378834] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.378986] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.379136] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.379137] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.379140] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379141] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379143] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379145] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379147] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.379149] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.379151] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.379153] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.379155] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.379164] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.379166] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.379168] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.379170] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379172] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379174] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379175] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379205] NET: Registered protocol family 2
[ 0.379493] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.379803] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.380054] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.380241] TCP: reno registered
[ 0.380379] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380536] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380739] NET: Registered protocol family 1
[ 0.380960] RPC: Registered named UNIX socket transport module.
[ 0.381101] RPC: Registered udp transport module.
[ 0.381245] RPC: Registered tcp transport module.
[ 0.381381] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.381535] pci 0000:00:02.0: Boot video device
[ 0.381843] PCI: CLS 64 bytes, default 64
[ 0.381889] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.382034] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.382345] Simple Boot Flag at 0x35 set to 0x1
[ 0.382784] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 0.382929] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 0.383075] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 0.383227] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 0.383394] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.383624] Scanning for low memory corruption every 60 seconds
[ 0.383942] audit: initializing netlink socket (disabled)
[ 0.384088] type=2000 audit(1396117355.202:1): initialized
[ 0.422127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.423322] VFS: Disk quotas dquot_6.5.2
[ 0.423493] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.424137] NFS: Registering the id_resolver key type
[ 0.424292] Key type id_resolver registered
[ 0.424426] Key type id_legacy registered
[ 0.424566] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 0.424798] msgmni has been set to 7499
[ 0.424980] SELinux: Registering netfilter hooks
[ 0.425135] cryptomgr_test (40) used greatest stack depth: 7152 bytes left
[ 0.425319] cryptomgr_test (41) used greatest stack depth: 6880 bytes left
[ 0.425848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.426074] io scheduler noop registered
[ 0.426222] io scheduler deadline registered
[ 0.426377] io scheduler cfq registered (default)
[ 0.426980] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.427130] intel_idle: MWAIT substates: 0x1120
[ 0.427131] intel_idle: v0.4 model 0x25
[ 0.427132] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.427816] ACPI: AC Adapter [AC] (on-line)
[ 0.428019] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.428748] ACPI: Lid Switch [LID]
[ 0.428973] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.429257] ACPI: Sleep Button [SLPB]
[ 0.429433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.429658] ACPI: Power Button [PWRF]
[ 0.433853] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.434000] ACPI: Thermal Zone [THM0] (52 C)
[ 0.434319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.456505] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 0.457198] Non-volatile memory driver v1.3
[ 0.460119] brd: module loaded
[ 0.461640] loop: module loaded
[ 0.462022] ahci 0000:00:1f.2: version 3.0
[ 0.462254] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.462339] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.462644] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.462971] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst
[ 0.470506] scsi0 : ahci
[ 0.470837] scsi1 : ahci
[ 0.471138] scsi2 : ahci
[ 0.471499] scsi3 : ahci
[ 0.471897] scsi4 : ahci
[ 0.472236] scsi5 : ahci
[ 0.472457] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 40
[ 0.472765] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 40
[ 0.473099] ata3: DUMMY
[ 0.473271] ata4: DUMMY
[ 0.473430] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 40
[ 0.473783] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 40
[ 0.474114] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.474649] ACPI: Battery Slot [BAT0] (battery present)
[ 0.474846] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.474988] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.475138] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.475291] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.475443] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.475584] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.475853] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.476104] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 0.658045] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:12:07:50
[ 0.658281] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.658488] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 0.658646] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 0.658790] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 0.658942] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 0.659169] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.659325] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
[ 0.659551] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 0.659708] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k
[ 0.659941] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.660092] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 0.660244] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 0.660393] sky2: driver version 1.30
[ 0.660585] usbcore: registered new interface driver rtl8187
[ 0.660725] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 0.660868] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 0.661025] usbcore: registered new interface driver asix
[ 0.661169] usbcore: registered new interface driver ax88179_178a
[ 0.661321] usbcore: registered new interface driver cdc_ether
[ 0.661465] usbcore: registered new interface driver r815x
[ 0.661608] usbcore: registered new interface driver net1080
[ 0.661752] usbcore: registered new interface driver rndis_host
[ 0.661899] usbcore: registered new interface driver cdc_subset
[ 0.662044] usbcore: registered new interface driver zaurus
[ 0.662199] usbcore: registered new interface driver cdc_ncm
[ 0.662428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.662581] ehci_hcd: block sizes: qh 136 qtd 96 itd 192 sitd 96
[ 0.662584] ehci-pci: EHCI PCI platform driver
[ 0.662800] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.663008] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.663264] ehci-pci 0000:00:1a.0: debug port 2
[ 0.663404] ehci-pci 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 0.663408] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.663427] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.667316] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.667318] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[ 0.667333] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 0.667476] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.673280] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.673464] usb usb1: default language 0x0409
[ 0.673474] usb usb1: udev 1, busnum 1, minor = 0
[ 0.673476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.673621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.673845] usb usb1: Product: EHCI Host Controller
[ 0.673982] usb usb1: Manufacturer: Linux 3.13.6 ehci_hcd
[ 0.674121] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.674387] usb usb1: usb_probe_device
[ 0.674393] usb usb1: configuration #1 chosen from 1 choice
[ 0.674414] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.674451] hub 1-0:1.0: usb_probe_interface
[ 0.674457] hub 1-0:1.0: usb_probe_interface - got id
[ 0.674460] hub 1-0:1.0: USB hub found
[ 0.677056] hub 1-0:1.0: 3 ports detected
[ 0.677215] hub 1-0:1.0: standalone hub
[ 0.677217] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.677219] hub 1-0:1.0: individual port over-current protection
[ 0.677221] hub 1-0:1.0: power on to power good time: 20ms
[ 0.677228] hub 1-0:1.0: local power source is good
[ 0.677259] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 0.677261] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.677369] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.677555] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.677794] ehci-pci 0000:00:1d.0: debug port 2
[ 0.677934] ehci-pci 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 0.677938] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.677955] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.681848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.681851] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[ 0.681868] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 0.682011] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.687205] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.687377] usb usb2: default language 0x0409
[ 0.687385] usb usb2: udev 1, busnum 2, minor = 128
[ 0.687387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.687531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687756] usb usb2: Product: EHCI Host Controller
[ 0.687893] usb usb2: Manufacturer: Linux 3.13.6 ehci_hcd
[ 0.688033] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.688243] usb usb2: usb_probe_device
[ 0.688245] usb usb2: configuration #1 chosen from 1 choice
[ 0.688253] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.688267] hub 2-0:1.0: usb_probe_interface
[ 0.688268] hub 2-0:1.0: usb_probe_interface - got id
[ 0.688270] hub 2-0:1.0: USB hub found
[ 0.688408] hub 2-0:1.0: 3 ports detected
[ 0.688542] hub 2-0:1.0: standalone hub
[ 0.688543] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.688545] hub 2-0:1.0: individual port over-current protection
[ 0.688546] hub 2-0:1.0: power on to power good time: 20ms
[ 0.688552] hub 2-0:1.0: local power source is good
[ 0.688582] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 0.688584] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.688627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.688770] ohci_hcd: block sizes: ed 80 td 96
[ 0.688773] ohci-pci: OHCI PCI platform driver
[ 0.688917] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689080] usbcore: registered new interface driver usblp
[ 0.689257] usbcore: registered new interface driver usb-storage
[ 0.689427] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.692850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.692991] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.693208] mousedev: PS/2 mouse device common for all mice
[ 0.693483] usbcore: registered new interface driver appletouch
[ 0.693633] usbcore: registered new interface driver bcm5974
[ 0.693860] rtc_cmos 00:06: RTC can wake from S4
[ 0.694145] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.694354] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.694666] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 0.694921] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.695162] Bluetooth: Virtual HCI driver ver 1.4
[ 0.695356] Bluetooth: HCI UART driver ver 2.2
[ 0.695492] Bluetooth: HCI H4 protocol initialized
[ 0.695628] Bluetooth: HCI BCSP protocol initialized
[ 0.695766] Bluetooth: HCILL protocol initialized
[ 0.696003] usbcore: registered new interface driver bcm203x
[ 0.696149] usbcore: registered new interface driver bpa10x
[ 0.696496] usbcore: registered new interface driver bfusb
[ 0.696662] usbcore: registered new interface driver btusb
[ 0.696902] usbcore: registered new interface driver ath3k
[ 0.697052] usbcore: registered new interface driver ushc
[ 0.697322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.697711] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.697987] usbcore: registered new interface driver usbhid
[ 0.698126] usbhid: USB HID core driver
[ 0.699517] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 0.699655] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 0.699791] thinkpad_acpi: ThinkPad BIOS 6IET68WW (1.28 ), EC 6IHT36WW-1.11
[ 0.699934] thinkpad_acpi: Lenovo ThinkPad T410, model 2516CTO
[ 0.700414] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 0.700806] thinkpad_acpi: radio switch found; radios are enabled
[ 0.701012] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 0.701290] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 0.704321] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 0.705611] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 0.708995] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 0.709247] thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel
[ 0.710280] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 0.710716] hdaps: supported laptop not found!
[ 0.711101] hdaps: driver init failed (ret=-19)!
[ 0.711432] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 0.712510] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 0.714344] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 0.714603] Netfilter messages via NETLINK v0.30.
[ 0.714761] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.715057] ctnetlink v0.93: registering with nfnetlink.
[ 0.715386] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.715573] TCP: cubic registered
[ 0.715708] Initializing XFRM netlink socket
[ 0.716040] NET: Registered protocol family 10
[ 0.716715] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.716914] sit: IPv6 over IPv4 tunneling driver
[ 0.717320] NET: Registered protocol family 17
[ 0.717489] can: controller area network core (rev 20120528 abi 9)
[ 0.717657] NET: Registered protocol family 29
[ 0.717798] can: raw protocol (rev 20120528)
[ 0.717938] can: broadcast manager protocol (rev 20120528 t)
[ 0.718254] Bluetooth: RFCOMM TTY layer initialized
[ 0.718405] Bluetooth: RFCOMM socket layer initialized
[ 0.718554] Bluetooth: RFCOMM ver 1.11
[ 0.718696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.718838] Bluetooth: BNEP filters: protocol multicast
[ 0.718982] Bluetooth: BNEP socket layer initialized
[ 0.719125] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.719290] Bluetooth: HIDP socket layer initialized
[ 0.719457] 8021q: 802.1Q VLAN Support v1.8
[ 0.719632] Key type dns_resolver registered
[ 0.720721] registered taskstats version 1
[ 0.721745] Magic number: 6:892:393
[ 0.721992] console [netcon0] enabled
[ 0.722139] netconsole: network logging started
[ 0.722372] rtc_cmos 00:06: setting system clock to 2014-03-29 18:22:36 UTC (1396117356)
[ 0.730674] PM: Hibernation image not present or could not be loaded.
[ 0.777232] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.777250] hub 1-0:1.0: port 1: status 0501 change 0001
[ 0.788253] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.788273] hub 2-0:1.0: port 1: status 0501 change 0001
[ 0.877358] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 0.877407] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 0.928531] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 0.928540] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 0.935322] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.937450] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.937456] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.937940] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.937946] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.939309] ata1.00: ATA-8: HITACHI HTS725050A9A364, PC4ZC70F, max UDMA/100
[ 0.939458] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.940936] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.940943] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.941466] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.941472] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.942830] ata1.00: configured for UDMA/100
[ 0.943331] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72505 PC4Z PQ: 0 ANSI: 5
[ 0.943750] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.943803] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.943993] sd 0:0:0:0: [sda] Write Protect is off
[ 0.943997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.944063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979330] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.025052] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.026641] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.030540] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 1.030544] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.094083] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.094090] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.094239] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.094515] usb 1-1: usb_probe_device
[ 1.094523] usb 1-1: configuration #1 chosen from 1 choice
[ 1.094815] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.094857] hub 1-1:1.0: usb_probe_interface
[ 1.094863] hub 1-1:1.0: usb_probe_interface - got id
[ 1.094867] hub 1-1:1.0: USB hub found
[ 1.095142] hub 1-1:1.0: 6 ports detected
[ 1.095283] hub 1-1:1.0: standalone hub
[ 1.095284] hub 1-1:1.0: individual port power switching
[ 1.095286] hub 1-1:1.0: individual port over-current protection
[ 1.095287] hub 1-1:1.0: Single TT
[ 1.095289] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.095291] hub 1-1:1.0: Port indicators are supported
[ 1.095292] hub 1-1:1.0: power on to power good time: 100ms
[ 1.095780] hub 1-1:1.0: local power source is good
[ 1.096069] usb 1-1: usb port3's DeviceRemovable is changed to 1 according to platform information.
[ 1.096075] usb 1-1: usb port4's DeviceRemovable is changed to 1 according to platform information.
[ 1.096080] usb 1-1: usb port6's DeviceRemovable is changed to 1 according to platform information.
[ 1.096084] hub 1-1:1.0: enabling power on all ports
[ 1.096962] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 1.097001] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.147551] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.147555] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.196523] hub 1-1:1.0: port 1: status 0101 change 0001
[ 1.197184] hub 1-1:1.0: port 4: status 0101 change 0001
[ 1.197592] hub 1-1:1.0: port 6: status 0101 change 0001
[ 1.198306] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.249563] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.249574] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.297310] usb 1-1: ep 81: reserve intr @ 8+64 (1.0+256) [1/0 us] mask 0001
[ 1.297319] usb 1-1: link qh256-0001/ffff8800b6df0780 start 1 [1/0 us]
[ 1.313034] usb 2-1: udev 2, busnum 2, minor = 129
[ 1.313040] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.313174] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.313489] usb 2-1: usb_probe_device
[ 1.313495] usb 2-1: configuration #1 chosen from 1 choice
[ 1.313673] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 1.313709] hub 2-1:1.0: usb_probe_interface
[ 1.313713] hub 2-1:1.0: usb_probe_interface - got id
[ 1.313717] hub 2-1:1.0: USB hub found
[ 1.314032] hub 2-1:1.0: 8 ports detected
[ 1.314165] hub 2-1:1.0: standalone hub
[ 1.314171] hub 2-1:1.0: individual port power switching
[ 1.314173] hub 2-1:1.0: individual port over-current protection
[ 1.314174] hub 2-1:1.0: Single TT
[ 1.314175] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.314177] hub 2-1:1.0: Port indicators are supported
[ 1.314178] hub 2-1:1.0: power on to power good time: 100ms
[ 1.314718] hub 2-1:1.0: local power source is good
[ 1.315020] usb 2-1: usb port3's DeviceRemovable is changed to 1 according to platform information.
[ 1.315025] usb 2-1: usb port4's DeviceRemovable is changed to 1 according to platform information.
[ 1.315029] usb 2-1: usb port5's DeviceRemovable is changed to 1 according to platform information.
[ 1.315033] usb 2-1: usb port7's DeviceRemovable is changed to 1 according to platform information.
[ 1.315036] usb 2-1: usb port8's DeviceRemovable is changed to 1 according to platform information.
[ 1.315040] hub 2-1:1.0: enabling power on all ports
[ 1.316323] hub 1-1:1.0: state 7 ports 6 chg 0052 evt 0000
[ 1.316526] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 1.327576] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 1.383301] tsc: Refined TSC clocksource calibration: 2659.999 MHz
[ 1.389539] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.401523] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 1.404318] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412230] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.415750] hub 2-1:1.0: port 1: status 0101 change 0001
[ 1.417294] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.419053] ata2.00: ATAPI: Optiarc DVD RW AD-7930H, 1.D0, max UDMA/100
[ 1.431646] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.436676] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.438427] ata2.00: configured for UDMA/100
[ 1.454595] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7930H 1.D0 PQ: 0 ANSI: 5
[ 1.471573] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.471785] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.472129] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.472207] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.478400] usb 1-1.1: skipped 1 descriptor after interface
[ 1.479026] usb 1-1.1: default language 0x0409
[ 1.481033] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 1.481040] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c408
[ 1.481179] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.481430] usb 1-1.1: Product: USB Trackball
[ 1.481560] usb 1-1.1: Manufacturer: Logitech
[ 1.481879] usb 1-1.1: usb_probe_device
[ 1.481887] usb 1-1.1: configuration #1 chosen from 1 choice
[ 1.482290] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 1.482353] usbhid 1-1.1:1.0: usb_probe_interface
[ 1.482359] usbhid 1-1.1:1.0: usb_probe_interface - got id
[ 1.485374] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7
[ 1.485811] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.0-1.1/input0
[ 1.486315] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 1.497531] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 1.517340] usb 2-1: ep 81: reserve intr @ 8+64 (1.0+256) [1/0 us] mask 0001
[ 1.517349] usb 2-1: link qh256-0001/ffff880000096e40 start 1 [1/0 us]
[ 1.559564] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.570602] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 1.646125] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 1.646375] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.648208] usb 1-1.4: skipped 1 descriptor after interface
[ 1.648540] usb 1-1.4: default language 0x0409
[ 1.649786] usb 1-1.4: udev 4, busnum 1, minor = 3
[ 1.649792] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.649997] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.650189] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.650359] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.650491] usb 1-1.4: SerialNumber: 5CAC4CD02412
[ 1.650724] usb 1-1.4: usb_probe_device
[ 1.650732] usb 1-1.4: configuration #1 chosen from 1 choice
[ 1.650965] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 1.651029] btusb 1-1.4:1.0: usb_probe_interface
[ 1.651034] btusb 1-1.4:1.0: usb_probe_interface - got id
[ 1.651474] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 1.651509] usb 1-1.4: ep 81: reserve intr @ 0+8 (0.0+1) [1/3 us] mask 0601
[ 1.651518] usb 1-1.4: link qh1-0601/ffff880132b5c900 start 0 [1/3 us]
[ 1.651548] usb 1-1.4: adding 1-1.4:1.2 (config #1, interf

[TomWij]

[gentoo2x]

My kernel config is:

< > Nouveau (nVidia) cards │ │
│ │ < > Intel I810 │ │
│ │ <M> Intel 8xx/9xx/G3x/G4x/HD Graphics │ │
│ │ [*] Enable modesetting on intel by default │ │
│ │ [*] Enable legacy fbdev support for the modesettting intel driv│ │
│ │ [ ] Enable preliminary support for prerelease Intel hardware by│ │
│ │ < > Matrox g200/g400



[code:1:f18269b8d3]
thinkpad ~ # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.6 (root@thinkpad) (gcc version 4.7.3 (Gentoo 4.7.3 p1.1, pie-0.5.5) ) #2 SMP Fri Mar 28 13:07:17 CET 2014
[ 0.000000] Command line: root=/dev/sda5 raid=noautodetect
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 2516CTO/2516CTO, BIOS 6IET68WW (1.28 ) 07/12/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f68b0-0x000f68bf] mapped at [ffff8800000f68b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01edf000, 0x01edffff] PGTABLE
[ 0.000000] BRK [0x01ee0000, 0x01ee0fff] PGTABLE
[ 0.000000] BRK [0x01ee1000, 0x01ee1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01ee2000, 0x01ee2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[ 0.000000] [mem 0x134000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[ 0.000000] [mem 0x100000000-0x133ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[ 0.000000] [mem 0xbb282000-0xbb35efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] [mem 0xbb40f000-0xbb46efff] page 4k
[ 0.000000] BRK [0x01ee3000, 0x01ee3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] [mem 0xbb70f000-0xbb716fff] page 4k
[ 0.000000] BRK [0x01ee4000, 0x01ee4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb76afff]
[ 0.000000] [mem 0xbb71f000-0xbb76afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] [mem 0xbb7ff000-0xbb7fffff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f6870 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bb7ef338 00009C (v01 LENOVO TP-6I 00001280 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bb7ef400 0000F4 (v04 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bb7ef7d1 00F2F8 (v01 LENOVO TP-6I 00001280 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bb6e7000 000040
[ 0.000000] ACPI: SSDT 00000000bb7ef5b4 00021D (v01 LENOVO TP-6I 00001280 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bb7feac9 000052 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bb7feb1b 000084 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bb7febd7 00003C (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bb7fec13 000038 (v01 LENOVO TP-6I 00001280 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bb7fedbe 0000A4 (v16 LENOVO TP-6I 00001280 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bb7fee62 000176 (v01 LENOVO TP-6I 00001280 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bb7fefd8 000028 (v01 LENOVO TP-6I 00001280 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bb6e591a 00084B (v01 LENOVO TP-6I 00001280 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bb78b000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 00000000bb781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bb779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bb778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bb777000 00049F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[ 0.000000] NODE_DATA [mem 0x137ff9000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb27bfff]
[ 0.000000] node 0: [mem 0xbb282000-0xbb35efff]
[ 0.000000] node 0: [mem 0xbb40f000-0xbb46efff]
[ 0.000000] node 0: [mem 0xbb70f000-0xbb716fff]
[ 0.000000] node 0: [mem 0xbb71f000-0xbb76afff]
[ 0.000000] node 0: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x137ffffff]
[ 0.000000] On node 0 totalpages: 996267
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s79040 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s79040 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 980677
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 raid=noautodetect
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3839644K/3985068K available (7188K kernel code, 814K rwdata, 3748K rodata, 1076K init, 1016K bss, 145424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2660.128 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.25 BogoMIPS (lpj=2660128)
[ 0.000241] pid_max: default: 32768 minimum: 301
[ 0.000378] Security Framework initialized
[ 0.002438] SELinux: Initializing.
[ 0.002559] SELinux: Starting in permissive mode
[ 0.002785] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003989] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004553] Mount-cache hash table entries: 256
[ 0.004852] Initializing cgroup subsys freezer
[ 0.005004] CPU: Physical Processor ID: 0
[ 0.005120] CPU: Processor Core ID: 0
[ 0.005239] mce: CPU supports 9 MCE banks
[ 0.005363] CPU0: Thermal monitoring enabled (TM1)
[ 0.005490] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.005856] Freeing SMP alternatives memory: 20K (ffffffff81dda000 - ffffffff81ddf000)
[ 0.006061] ACPI: Core revision 20131115
[ 0.011351] ACPI: All ACPI Tables successfully acquired
[ 0.019312] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.029456] smpboot: CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.130985] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.131381] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.131526] ... version: 3
[ 0.131660] ... bit width: 48
[ 0.131793] ... generic registers: 4
[ 0.131927] ... value mask: 0000ffffffffffff
[ 0.132068] ... max period: 000000007fffffff
[ 0.132207] ... fixed-purpose events: 3
[ 0.132340] ... event mask: 000000070000000f
[ 0.132714] x86: Booting SMP configuration:
[ 0.132850] .... node #0, CPUs: #1 #2 #3
[ 0.173041] x86: Booted up 1 node, 4 CPUs
[ 0.173301] smpboot: Total of 4 processors activated (21281.02 BogoMIPS)
[ 0.175467] devtmpfs: initialized
[ 0.175811] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.176053] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.176292] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.176519] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.176746] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.176973] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.177393] RTC time: 18:22:35, date: 03/29/14
[ 0.177571] NET: Registered protocol family 16
[ 0.177811] cpuidle: using governor ladder
[ 0.177946] cpuidle: using governor menu
[ 0.178117] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.178343] ACPI: bus type PCI registered
[ 0.178527] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.178762] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.201268] PCI: Using configuration type 1 for base access
[ 0.202736] bio: create slab <bio-0> at 0
[ 0.202961] ACPI: Added _OSI(Module Device)
[ 0.203100] ACPI: Added _OSI(Processor Device)
[ 0.203235] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.203372] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204643] ACPI : EC: EC description table is found, configuring boot EC
[ 0.208626] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.285619] ACPI: SSDT 00000000bb71a598 0004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.286203] ACPI: Dynamic OEM Table Load:
[ 0.286420] ACPI: SSDT (null) 0004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.286816] ACPI: SSDT 00000000bb718718 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.287410] ACPI: Dynamic OEM Table Load:
[ 0.287626] ACPI: SSDT (null) 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.293250] ACPI: SSDT 00000000bb719a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.293874] ACPI: Dynamic OEM Table Load:
[ 0.294091] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.297130] ACPI: SSDT 00000000bb717d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.297718] ACPI: Dynamic OEM Table Load:
[ 0.297934] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.302541] ACPI: Interpreter enabled
[ 0.302681] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.302995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.303321] ACPI: (supports S0 S3 S4 S5)
[ 0.303455] ACPI: Using IOAPIC for interrupt routing
[ 0.303611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.304494] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.311932] ACPI: Power Resource [PUBS] (on)
[ 0.317486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.318117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.318726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.319515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320768] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321375] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.322167] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322747] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.322892] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.323123] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.323294] PCI host bridge to bus 0000:ff
[ 0.323430] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.323576] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.323612] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.323646] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.323678] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.323707] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.323736] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.323785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.323928] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.324311] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.324527] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.324762] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.324987] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.325213] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.325418] PCI host bridge to bus 0000:00
[ 0.325554] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.325696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.325838] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.325981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.326126] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.326271] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.326416] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.326565] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.326624] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.326634] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.326639] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.326643] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.326739] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.326767] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.326858] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.326923] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.326946] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.326957] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.327115] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.327140] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.327151] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.327162] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.327249] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.327287] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.327462] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.327486] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.327593] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.327631] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.327807] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.327828] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.327922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.327964] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.328136] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.328233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.328273] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.328442] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.328539] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.328580] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.328753] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.328850] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.328891] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.329060] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.329158] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.329199] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.329375] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.329399] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.329505] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.329543] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.329711] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.329829] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.329988] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.330015] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.330026] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.330037] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.330048] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.330059] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.330070] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.330136] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.330196] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.330217] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.330246] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.330327] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.330355] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.330541] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.330768] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.330784] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.330796] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.330894] pci 0000:03:00.0: supports D1 D2
[ 0.330895] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.332681] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.332831] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.332836] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.332904] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.333046] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.333051] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.333058] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.333188] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.333205] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.333418] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.333576] pci 0000:0d:00.0: supports D1 D2
[ 0.333578] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333696] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.333719] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.333877] pci 0000:0d:00.1: supports D1 D2
[ 0.333878] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333993] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.334015] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.334174] pci 0000:0d:00.3: supports D1 D2
[ 0.334176] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.336746] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.336895] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.336975] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.337130] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.337132] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.337134] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.337136] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.337138] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.337140] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.338626] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.338855] ACPI: \_SB_.UNCR: notify handler is installed
[ 0.338857] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.338887] Found 2 acpi root devices
[ 0.338935] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.339153] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.339383] vgaarb: loaded
[ 0.339512] vgaarb: bridge control possible 0000:00:02.0
[ 0.339754] SCSI subsystem initialized
[ 0.339924] libata version 3.00 loaded.
[ 0.339945] ACPI: bus type USB registered
[ 0.340094] usbcore: registered new interface driver usbfs
[ 0.340240] usbcore: registered new interface driver hub
[ 0.340397] usbcore: registered new device driver usb
[ 0.340548] media: Linux media interface: v0.10
[ 0.340692] Linux video capture interface: v2.00
[ 0.340832] pps_core: LinuxPPS API ver. 1 registered
[ 0.340969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.341203] PTP clock support registered
[ 0.341394] PCI: Using ACPI for IRQ routing
[ 0.351267] PCI: pci_cache_line_size set to 64 bytes
[ 0.351429] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.351431] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.351434] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.351436] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.351438] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.351440] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.351442] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.351521] Bluetooth: Core ver 2.17
[ 0.351663] NET: Registered protocol family 31
[ 0.351799] Bluetooth: HCI device and connection manager initialized
[ 0.351943] Bluetooth: HCI socket layer initialized
[ 0.352081] Bluetooth: L2CAP socket layer initialized
[ 0.352221] Bluetooth: SCO socket layer initialized
[ 0.352360] NET: Registered protocol family 8
[ 0.352495] NET: Registered protocol family 20
[ 0.352699] cfg80211: Calling CRDA to update world regulatory domain
[ 0.352843] NetLabel: Initializing
[ 0.352976] NetLabel: domain hash size = 128
[ 0.353114] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.353264] NetLabel: unlabeled traffic allowed by default
[ 0.353482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.353989] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.356157] Switched to clocksource hpet
[ 0.361027] pnp: PnP ACPI init
[ 0.363644] ACPI: bus type PNP registered
[ 0.364906] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.365053] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.365207] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.365352] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.365496] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.365640] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.365785] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.365931] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.366076] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.366227] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.366373] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.366518] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.366664] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.366810] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.366956] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.367103] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.367415] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.367558] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.367701] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.367844] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.367986] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.368127] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.368278] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.368421] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.368565] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.368708] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.368853] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.368997] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.369142] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.369292] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.369437] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369477] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.369486] pnp 00:03: [dma 4]
[ 0.369498] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.369515] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.369546] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.369568] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.369589] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.369610] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.369887] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.370701] pnp: PnP ACPI: found 10 devices
[ 0.370836] ACPI: bus type PNP unregistered
[ 0.377429] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.377580] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.377720] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.377867] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.378018] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.378166] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.378312] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.378459] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.378692] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.378834] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.378986] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.379136] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.379137] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.379140] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379141] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379143] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379145] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379147] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.379149] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.379151] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.379153] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.379155] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.379164] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.379166] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.379168] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.379170] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379172] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379174] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379175] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379205] NET: Registered protocol family 2
[ 0.379493] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.379803] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.380054] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.380241] TCP: reno registered
[ 0.380379] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380536] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380739] NET: Registered protocol family 1
[ 0.380960] RPC: Registered named UNIX socket transport module.
[ 0.381101] RPC: Registered udp transport module.
[ 0.381245] RPC: Registered tcp transport module.
[ 0.381381] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.381535] pci 0000:00:02.0: Boot video device
[ 0.381843] PCI: CLS 64 bytes, default 64
[ 0.381889] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.382034] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.382345] Simple Boot Flag at 0x35 set to 0x1
[ 0.382784] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 0.382929] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 0.383075] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 0.383227] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 0.383394] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.383624] Scanning for low memory corruption every 60 seconds
[ 0.383942] audit: initializing netlink socket (disabled)
[ 0.384088] type=2000 audit(1396117355.202:1): initialized
[ 0.422127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.423322] VFS: Disk quotas dquot_6.5.2
[ 0.423493] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.424137] NFS: Registering the id_resolver key type
[ 0.424292] Key type id_resolver registered
[ 0.424426] Key type id_legacy registered
[ 0.424566] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 0.424798] msgmni has been set to 7499
[ 0.424980] SELinux: Registering netfilter hooks
[ 0.425135] cryptomgr_test (40) used greatest stack depth: 7152 bytes left
[ 0.425319] cryptomgr_test (41) used greatest stack depth: 6880 bytes left
[ 0.425848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.426074] io scheduler noop registered
[ 0.426222] io scheduler deadline registered
[ 0.426377] io scheduler cfq registered (default)
[ 0.426980] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.427130] intel_idle: MWAIT substates: 0x1120
[ 0.427131] intel_idle: v0.4 model 0x25
[ 0.427132] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.427816] ACPI: AC Adapter [AC] (on-line)
[ 0.428019] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.428748] ACPI: Lid Switch [LID]
[ 0.428973] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.429257] ACPI: Sleep Button [SLPB]
[ 0.429433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.429658] ACPI: Power Button [PWRF]
[ 0.433853] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.434000] ACPI: Thermal Zone [THM0] (52 C)
[ 0.434319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.456505] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 0.457198] Non-volatile memory driver v1.3
[ 0.460119] brd: module loaded
[ 0.461640] loop: module loaded
[ 0.462022] ahci 0000:00:1f.2: version 3.0
[ 0.462254] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.462339] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.462644] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.462971] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst
[ 0.470506] scsi0 : ahci
[ 0.470837] scsi1 : ahci
[ 0.471138] scsi2 : ahci
[ 0.471499] scsi3 : ahci
[ 0.471897] scsi4 : ahci
[ 0.472236] scsi5 : ahci
[ 0.472457] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 40
[ 0.472765] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 40
[ 0.473099] ata3: DUMMY
[ 0.473271] ata4: DUMMY
[ 0.473430] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 40
[ 0.473783] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 40
[ 0.474114] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.474649] ACPI: Battery Slot [BAT0] (battery present)
[ 0.474846] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.474988] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.475138] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.475291] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.475443] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.475584] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.475853] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.476104] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 0.658045] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:12:07:50
[ 0.658281] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.658488] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 0.658646] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 0.658790] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 0.658942] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 0.659169] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.659325] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
[ 0.659551] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 0.659708] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k
[ 0.659941] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.660092] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 0.660244] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 0.660393] sky2: driver version 1.30
[ 0.660585] usbcore: registered new interface driver rtl8187
[ 0.660725] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 0.660868] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 0.661025] usbcore: registered new interface driver asix
[ 0.661169] usbcore: registered new interface driver ax88179_178a
[ 0.661321] usbcore: registered new interface driver cdc_ether
[ 0.661465] usbcore: registered new interface driver r815x
[ 0.661608] usbcore: registered new interface driver net1080
[ 0.661752] usbcore: registered new interface driver rndis_host
[ 0.661899] usbcore: registered new interface driver cdc_subset
[ 0.662044] usbcore: registered new interface driver zaurus
[ 0.662199] usbcore: registered new interface driver cdc_ncm
[ 0.662428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.662581] ehci_hcd: block sizes: qh 136 qtd 96 itd 192 sitd 96
[ 0.662584] ehci-pci: EHCI PCI platform driver
[ 0.662800] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.663008] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.663264] ehci-pci 0000:00:1a.0: debug port 2
[ 0.663404] ehci-pci 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 0.663408] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.663427] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.667316] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.667318] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[ 0.667333] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 0.667476] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.673280] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.673464] usb usb1: default language 0x0409
[ 0.673474] usb usb1: udev 1, busnum 1, minor = 0
[ 0.673476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.673621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.673845] usb usb1: Product: EHCI Host Controller
[ 0.673982] usb usb1: Manufacturer: Linux 3.13.6 ehci_hcd
[ 0.674121] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.674387] usb usb1: usb_probe_device
[ 0.674393] usb usb1: configuration #1 chosen from 1 choice
[ 0.674414] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.674451] hub 1-0:1.0: usb_probe_interface
[ 0.674457] hub 1-0:1.0: usb_probe_interface - got id
[ 0.674460] hub 1-0:1.0: USB hub found
[ 0.677056] hub 1-0:1.0: 3 ports detected
[ 0.677215] hub 1-0:1.0: standalone hub
[ 0.677217] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.677219] hub 1-0:1.0: individual port over-current protection
[ 0.677221] hub 1-0:1.0: power on to power good time: 20ms
[ 0.677228] hub 1-0:1.0: local power source is good
[ 0.677259] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 0.677261] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.677369] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.677555] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.677794] ehci-pci 0000:00:1d.0: debug port 2
[ 0.677934] ehci-pci 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 0.677938] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.677955] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.681848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.681851] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[ 0.681868] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 0.682011] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.687205] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.687377] usb usb2: default language 0x0409
[ 0.687385] usb usb2: udev 1, busnum 2, minor = 128
[ 0.687387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.687531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687756] usb usb2: Product: EHCI Host Controller
[ 0.687893] usb usb2: Manufacturer: Linux 3.13.6 ehci_hcd
[ 0.688033] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.688243] usb usb2: usb_probe_device
[ 0.688245] usb usb2: configuration #1 chosen from 1 choice
[ 0.688253] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.688267] hub 2-0:1.0: usb_probe_interface
[ 0.688268] hub 2-0:1.0: usb_probe_interface - got id
[ 0.688270] hub 2-0:1.0: USB hub found
[ 0.688408] hub 2-0:1.0: 3 ports detected
[ 0.688542] hub 2-0:1.0: standalone hub
[ 0.688543] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.688545] hub 2-0:1.0: individual port over-current protection
[ 0.688546] hub 2-0:1.0: power on to power good time: 20ms
[ 0.688552] hub 2-0:1.0: local power source is good
[ 0.688582] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 0.688584] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.688627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.688770] ohci_hcd: block sizes: ed 80 td 96
[ 0.688773] ohci-pci: OHCI PCI platform driver
[ 0.688917] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689080] usbcore: registered new interface driver usblp
[ 0.689257] usbcore: registered new interface driver usb-storage
[ 0.689427] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.692850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.692991] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.693208] mousedev: PS/2 mouse device common for all mice
[ 0.693483] usbcore: registered new interface driver appletouch
[ 0.693633] usbcore: registered new interface driver bcm5974
[ 0.693860] rtc_cmos 00:06: RTC can wake from S4
[ 0.694145] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.694354] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.694666] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 0.694921] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.695162] Bluetooth: Virtual HCI driver ver 1.4
[ 0.695356] Bluetooth: HCI UART driver ver 2.2
[ 0.695492] Bluetooth: HCI H4 protocol initialized
[ 0.695628] Blue

[TomWij]

The kernel config looks okay; your dmesg is cut off again (by the forum text limits), you'll want to paste it at http://dpaste.com and paste a link to it.

[gentoo2x]

This is the link: http://dpaste.com/hold/1763541/