Filtering IPv6 Router Advertisements: WHAT!?

wswartzendruber

I'm told that despite router advertisements being ICMPv6, I can't use ip6tables to filter them. "Packets don't pass through the CPU unless they jump interfaces" is what I'm told.

I'm having a very hard time believing this.

massimo · Veteran Joined: 22 Jun 2003 Posts: 1226

Have a look at [1]. Nevertheless, you will not be able to prevent any packet from entering your interface physically (unless you cut the cable or filter it at some other point in your network).

[1] RFC4890
_________________
Hello 911? How are you?

maxime1986 · n00b Joined: 23 Oct 2009 Posts: 74

you can't filter then but at least you can specify if you want to accept it :
sysctl net.ipv6.conf.all.accept_ra

pa4wdh · l33t Joined: 16 Dec 2005 Posts: 812

You can absolutely filter them (i know for sure because i had problems because i blocked them

).
Any packet entering or leaving a linux system passes the CPU (maybe with an exception for special hardware, but i guess thats not the case).

Maybe the one who told you this is confused with IPv4's ARP, because that's not IP but an ARP packet directly in an ethernet frame you can't filter it with iptables.
_________________
The gentoo way of bringing peace to the world:
USE="-war" emerge --newuse @world

My shared code repository: https://code.pa4wdh.nl.eu.org
Music, Free as in Freedom: https://www.jamendo.com

hayalci · n00b Joined: 18 Jul 2004 Posts: 44

pa4wdh · l33t Joined: 16 Dec 2005 Posts: 812

As far as i know from experience building my own set of firewall rules on my router (IPv4 and IPv6, doing routing, DHCP, DNS, HTTP, OpenVPN, FTP, SSH), you can block really anything as long as it's carried on IP, so the only exception would be ARP in case of IPv4. Since DHCP is just using UDP ports 67 and 68 i see no reason why you wouldn't be able to block it.
_________________
The gentoo way of bringing peace to the world:
USE="-war" emerge --newuse @world

My shared code repository: https://code.pa4wdh.nl.eu.org
Music, Free as in Freedom: https://www.jamendo.com

hayalci · n00b Joined: 18 Jul 2004 Posts: 44

DHCP still works because it taps into the network interface and takes DHCP packets from there. Even if you block it with iptables rules, so that the packet is dropped, the DHCP client(/server) will still get what it needs.

RNHavens · n00b Joined: 22 May 2007 Posts: 8

What about Ebtables to filter at layer two? I've never looked into the above topics, but I would think that Ebtables would stop all of them.