View previous topic :: View next topic |
Author |
Message |
dirtbag Guru
Joined: 18 Feb 2003 Posts: 508 Location: NC
|
Posted: Mon Jan 03, 2011 6:39 pm Post subject: cant mount my phone sd card anymore? |
|
|
hey folks, this used to work fine, but I recently upgraded my kernel and now I can no longer mount the sd card in my htc incredible.
badman ~ # uname -a
Linux badman 2.6.36-tuxonice #5 SMP Thu Nov 18 18:50:00 EST 2010 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ AuthenticAMD GNU/Linux
badman ~ #
(from dmesg)
Code: |
usb 1-8: new full speed USB device using ohci_hcd and address 11
scsi4 : usb-storage 1-8:1.0
scsi 4:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
badman jason # fdisk -l |
(from fdisk -l) Code: |
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xfacbfacb
Device Boot Start End Blocks Id System
/dev/sda1 * 1 7 56196 83 Linux
/dev/sda2 8 130 987997+ 82 Linux swap / Solaris
/dev/sda3 131 19457 155244127+ 83 Linux
badman jason # |
I cant mount /dev/sdb1 where this device (i assume) is supposed to be.. any ideas?
I can still mount this device fine from my laptop ( running xubuntu)
-db |
|
Back to top |
|
|
TJNII l33t
Joined: 09 Nov 2003 Posts: 637 Location: for(;;);
|
|
Back to top |
|
|
dirtbag Guru
Joined: 18 Feb 2003 Posts: 508 Location: NC
|
Posted: Sat Jan 08, 2011 6:18 pm Post subject: |
|
|
here ya go
Code: |
badman jason # ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sdb
badman jason # dmesg | tail
scsi13 : usb-storage 1-8:1.0
scsi 13:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg1 type 0
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 1-8: USB disconnect, address 40
usb 1-8: new full speed USB device using ohci_hcd and address 41
scsi14 : usb-storage 1-8:1.0
scsi 14:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 14:0:0:0: Attached scsi generic sg1 type 0
sd 14:0:0:0: [sdb] Attached SCSI removable disk
badman jason # mount /dev/sdb1 /mnt
mount: you must specify the filesystem type
badman jason # mount /dev/sdb /mnt
mount: you must specify the filesystem type
badman jason # dmesg | tail
scsi13 : usb-storage 1-8:1.0
scsi 13:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg1 type 0
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 1-8: USB disconnect, address 40
usb 1-8: new full speed USB device using ohci_hcd and address 41
scsi14 : usb-storage 1-8:1.0
scsi 14:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 14:0:0:0: Attached scsi generic sg1 type 0
sd 14:0:0:0: [sdb] Attached SCSI removable disk
badman jason #
|
|
|
Back to top |
|
|
TJNII l33t
Joined: 09 Nov 2003 Posts: 637 Location: for(;;);
|
Posted: Sat Jan 08, 2011 10:14 pm Post subject: |
|
|
It's not seeing any partitions on your sd card.
Can you post the output of "fdisk -l /dev/sdb", please? (Your previous post was for you hard drive, not the SD card)
What partition types have you enabled support for in your kernel? Do you have support for PC BIOS partitions? _________________ Maintaining documentation on upgrades is apparently not within the power of Gentoo
Beware when you emerge -u world! |
|
Back to top |
|
|
carlosp n00b
Joined: 21 Sep 2006 Posts: 31
|
Posted: Wed Jan 09, 2013 3:14 pm Post subject: |
|
|
Any update here? I am having the same problems. _________________ Live is complex - it has both real and imaginary parts. (Anonymous) |
|
Back to top |
|
|
|