Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[RAID 1] Message d'erreur après reboot
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Mon Jan 03, 2011 8:59 am    Post subject: [RAID 1] Message d'erreur après reboot Reply with quote

Bonjour et meilleurs vœux à tous les membres du forum.

Après avoir rallumé mon ordi après quelques congés j'ai vu au boot quelques erreurs concernant mon raid1, par contre pas de répercussion sur l'utilisation de la machine.

Je paste ci-dessous les différentes informations qui pourraient être utiles.


Code:
[root@corei7 ascodas]$ dmesg | grep md
ata1: SATA max UDMA/133 cmd 0x3158 ctl 0x316c bmdma 0x3130 irq 19
ata2: SATA max UDMA/133 cmd 0x3150 ctl 0x3168 bmdma 0x3138 irq 19
ata3: SATA max UDMA/133 cmd 0x3148 ctl 0x3164 bmdma 0x3110 irq 18
ata4: SATA max UDMA/133 cmd 0x3140 ctl 0x3160 bmdma 0x3118 irq 18
ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 16
ata6: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 16
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
md: bind<sdb7>
md: bind<sdc5>
md: bind<sdc6>
md: bind<sdc7>
md: bind<sdb5>
md: raid1 personality registered for level 1
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 300000477184
raid1: raid set md3 active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 400200892416
 md1: unknown partition table
 md3: unknown partition table
md: bind<sdb6>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 300000477184
 md2: unknown partition table
EXT4-fs (md1): barriers enabled
kjournald2 starting: pid 1421, dev md1:8, commit interval 5 seconds
EXT4-fs (md1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (md1): internal journal on md1:8
EXT4-fs (md1): delayed allocation enabled
EXT4-fs (md1): mounted filesystem with ordered data mode
EXT4-fs (md2): barriers enabled
kjournald2 starting: pid 1439, dev md2:8, commit interval 5 seconds
EXT4-fs (md2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (md2): internal journal on md2:8
EXT4-fs (md2): delayed allocation enabled
EXT4-fs (md2): mounted filesystem with ordered data mode
EXT3 FS on md3, internal journal



Code:
[root@corei7 ascodas]$ fdisk -l

Disque /dev/sdb: 1000.2 Go, 1000204886016 octets
255 têtes, 63 secteurs/piste, 121601 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x00000000

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdb1               1      121601   976760001    5  Etendue
/dev/sdb5   *           1       36473   292969309+  fd  Linux rai
/dev/sdb6           36474       72946   292969341   fd  Linux rai
/dev/sdb7           72947      121601   390821256   fd  Linux rai

Disque /dev/sdc: 1000.2 Go, 1000204886016 octets
255 têtes, 63 secteurs/piste, 121601 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x00000000

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdc1               1      121601   976760001    5  Etendue
/dev/sdc5   *           1       36473   292969309+  fd  Linux rai
/dev/sdc6           36474       72946   292969341   fd  Linux rai
/dev/sdc7           72947      121601   390821256   fd  Linux rai

Disque /dev/sda: 320.1 Go, 320072933376 octets
255 têtes, 63 secteurs/piste, 38913 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x0001864a

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1   *           1        2432    19535008+  83  Linux
/dev/sda2            2433       18481   128913592+   5  Etendue
/dev/sda5            2433        4864    19535008+  83  Linux
/dev/sda6            4865        6080     9767488+  83  Linux
/dev/sda7            6081       18238    97659103+  83  Linux
/dev/sda8           18239       18481     1951866   82  Linux swa

Disque /dev/md3: 400.2 Go, 400200892416 octets
2 têtes, 4 secteurs/piste, 97705296 cylindres
Unités = cylindres de 8 * 512 = 4096 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x00000000

Le disque /dev/md3 ne contient pas une table de partition valide

Disque /dev/md1: 300.0 Go, 300000477184 octets
2 têtes, 4 secteurs/piste, 73242304 cylindres
Unités = cylindres de 8 * 512 = 4096 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x00000000

Le disque /dev/md1 ne contient pas une table de partition valide

Disque /dev/md2: 300.0 Go, 300000477184 octets
2 têtes, 4 secteurs/piste, 73242304 cylindres
Unités = cylindres de 8 * 512 = 4096 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x00000000

Le disque /dev/md2 ne contient pas une table de partition valide


Code:
[root@corei7 ascodas]$ mdadm --detail /dev/md1
/dev/md1:
        Version : 0.90
  Creation Time : Sat Nov 21 14:11:44 2009
     Raid Level : raid1
     Array Size : 292969216 (279.40 GiB 300.00 GB)
  Used Dev Size : 292969216 (279.40 GiB 300.00 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 1
    Persistence : Superblock is persistent

    Update Time : Mon Jan  3 09:47:44 2011
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

           UUID : c289dd4e:34805d73:a505a7da:c85ab409
         Events : 0.90

    Number   Major   Minor   RaidDevice State
       0       8       21        0      active sync   /dev/sdb5
       1       8       37        1      active sync   /dev/sdc5
[root@corei7 ascodas]$ mdadm --detail /dev/md2
/dev/md2:
        Version : 0.90
  Creation Time : Sat Nov 21 14:12:00 2009
     Raid Level : raid1
     Array Size : 292969216 (279.40 GiB 300.00 GB)
  Used Dev Size : 292969216 (279.40 GiB 300.00 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 2
    Persistence : Superblock is persistent

    Update Time : Mon Jan  3 09:27:09 2011
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

           UUID : 61b592a5:1d84abb4:fdc55552:8cf5bca1
         Events : 0.40

    Number   Major   Minor   RaidDevice State
       0       8       22        0      active sync   /dev/sdb6
       1       8       38        1      active sync   /dev/sdc6
[root@corei7 ascodas]$ mdadm --detail /dev/md3
/dev/md3:
        Version : 0.90
  Creation Time : Sat Nov 21 14:12:32 2009
     Raid Level : raid1
     Array Size : 390821184 (372.72 GiB 400.20 GB)
  Used Dev Size : 390821184 (372.72 GiB 400.20 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 3
    Persistence : Superblock is persistent

    Update Time : Mon Jan  3 09:36:53 2011
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

           UUID : e4ae76ef:39b6827e:2b41a788:072aec4f
         Events : 0.40

    Number   Major   Minor   RaidDevice State
       0       8       23        0      active sync   /dev/sdb7
       1       8       39        1      active sync   /dev/sdc7



Lors du fdsik -l, les messages "Le disque /dev/md2 ne contient pas une table de partition valide" sont semble t'il parfaitement normaux à ma connaissance en tous les cas présents depuis la création de mon raid.

Merci.
Back to top
View user's profile Send private message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Wed Jan 12, 2011 8:20 pm    Post subject: Reply with quote

Quelques infos supplémentaires après reboot, les messages sont du types :

Code:
/dev/sdb5 has no superblock
/dev/sdb6 has no superblock
/dev/sdb7 has no superblock



et puis assembly aborted pour chacun des disques et pourtant
Code:

mdadm --detail /dev/md1
/dev/md1:
        Version : 0.90
  Creation Time : Sat Nov 21 14:11:44 2009
     Raid Level : raid1
     Array Size : 292969216 (279.40 GiB 300.00 GB)
  Used Dev Size : 292969216 (279.40 GiB 300.00 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 1
    Persistence : Superblock is persistent

    Update Time : Wed Jan 12 21:16:14 2011
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

           UUID : c289dd4e:34805d73:a505a7da:c85ab409
         Events : 0.90

    Number   Major   Minor   RaidDevice State
       0       8       21        0      active sync   /dev/sdb5
       1       8       37        1      active sync   /dev/sdc5



Vous y comprenez quelque chose ?

merci.
Back to top
View user's profile Send private message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Wed Jan 12, 2011 8:54 pm    Post subject: Reply with quote

Et encore :
Code:

[root@corei7 thomas]$ mdadm -S /dev/md2
mdadm: stopped /dev/md2
[root@corei7 thomas]$ mdadm -As /dev/md2
mdadm: /dev/md2 has been started with 2 drives.
[root@corei7 thomas]$


La seule facon de reproduire le message du boot c'est de faire un assemblage alors que les disques sont déja assemblé par ex :

Code:
[root@corei7 thomas]$ mdadm -As /dev/md2
mdadm: /dev/md2 has been started with 2 drives.
[root@corei7 thomas]$ mdadm -As /dev/md2
mdadm: /dev/sdb6 has no superblock - assembly aborted
[root@corei7 thomas]$
Back to top
View user's profile Send private message
DuF
Advocate
Advocate


Joined: 09 Dec 2002
Posts: 2671
Location: Paris

PostPosted: Wed Jan 12, 2011 11:20 pm    Post subject: Reply with quote

Bonjour,

Que donne une vérification FS sur le raid1 concerné ?

Cdt,

DuF
Back to top
View user's profile Send private message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Thu Jan 13, 2011 8:25 pm    Post subject: Reply with quote

par exemple :

Code:
[root@corei7 thomas]$ fsck.ext4 /dev/sdb6
e2fsck 1.41.12 (17-May-2010)
/dev/sdb6 a été monté 101 fois sans avoir été vérifié, vérification forcée.
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe
/dev/sdb6 : 4166/18317312 fichiers (23.2% non contigus), 18127486/73242304 blocs


[root@corei7 thomas]$ fsck.ext4 /dev/sdc6
e2fsck 1.41.12 (17-May-2010)
/dev/sdc6 a été monté 101 fois sans avoir été vérifié, vérification forcée.
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe
/dev/sdc6 : 4166/18317312 fichiers (23.2% non contigus), 18127486/73242304 blocs
[root@corei7 thomas]$


et

Code:
[root@corei7 thomas]$ tune2fs -l /dev/sdb6
tune2fs 1.41.12 (17-May-2010)
Filesystem volume name:   <none>
Last mounted on:          /mnt/backup
Filesystem UUID:          9081244a-3341-4cf8-b5d4-d755bce34754
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype sparse_super large_file
Filesystem flags:         signed_directory_hash
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              18317312
Block count:              73242304
Reserved block count:     3662115
Free blocks:              55114818
Free inodes:              18313146
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1006
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Filesystem created:       Sat Nov 21 15:17:52 2009
Last mount time:          Wed Jan 12 21:47:59 2011
Last write time:          Thu Jan 13 21:14:51 2011
Mount count:              0
Maximum mount count:      26
Last checked:             Thu Jan 13 21:14:51 2011
Check interval:           15552000 (6 months)
Next check after:         Tue Jul 12 22:14:51 2011
Lifetime writes:          86 GB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:             256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
Default directory hash:   half_md4
Directory Hash Seed:      0ace9372-85cf-4900-8824-86f01a7cadcc
Journal backup:           inode blocks



[root@corei7 thomas]$ tune2fs -l /dev/sdc6
tune2fs 1.41.12 (17-May-2010)
Filesystem volume name:   <none>
Last mounted on:          /mnt/backup
Filesystem UUID:          9081244a-3341-4cf8-b5d4-d755bce34754
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype sparse_super large_file
Filesystem flags:         signed_directory_hash
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              18317312
Block count:              73242304
Reserved block count:     3662115
Free blocks:              55114818
Free inodes:              18313146
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1006
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Filesystem created:       Sat Nov 21 15:17:52 2009
Last mount time:          Wed Jan 12 21:47:59 2011
Last write time:          Thu Jan 13 21:16:45 2011
Mount count:              0
Maximum mount count:      26
Last checked:             Thu Jan 13 21:16:45 2011
Check interval:           15552000 (6 months)
Next check after:         Tue Jul 12 22:16:45 2011
Lifetime writes:          86 GB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:             256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
Default directory hash:   half_md4
Directory Hash Seed:      0ace9372-85cf-4900-8824-86f01a7cadcc
Journal backup:           inode bloc
Back to top
View user's profile Send private message
DuF
Advocate
Advocate


Joined: 09 Dec 2002
Posts: 2671
Location: Paris

PostPosted: Thu Jan 13, 2011 11:26 pm    Post subject: Reply with quote

C'est étonnant tout ça, quand tu as un problème de superblock, logiquement le raid ne fonctionne pas contrairement à ton cas et il suffit de faire un "assembly -force" pour que mdadm remette tout dans l'ordre, quand il n'y a pas eu de problèmes sur les FS et données. Mais vu que ça fonctionne c'est ennuyeux de faire ça car c'est pas censé être utilisé dans cette situation.

Tu n'as pas d'autres erreurs mais plus orientées matérielles ou pilotes pour le coup ? Les disques et câbles n'ont pas été manipulés récemment ?
Back to top
View user's profile Send private message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Sun Jan 16, 2011 6:29 pm    Post subject: Reply with quote

Non pas de manip de cable récemment.
Le message d'erreur est exactement le même pour les 3 disque raids.
Un autre message que j'ai pu glaner au boot : "No Volume Group Found" pour les trois disques.

et au risque de polluer mon topic un dmesg après reboot :
Code:

[root@corei7 thomas]$ dmesg
rted from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f]
pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd3220000-0xd32203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: reg 10 io port: [0x3158-0x315f]
pci 0000:00:1f.2: reg 14 io port: [0x316c-0x316f]
pci 0000:00:1f.2: reg 18 io port: [0x3150-0x3157]
pci 0000:00:1f.2: reg 1c io port: [0x3168-0x316b]
pci 0000:00:1f.2: reg 20 io port: [0x3130-0x313f]
pci 0000:00:1f.2: reg 24 io port: [0x3120-0x312f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0004000-0xf00040ff]
pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
pci 0000:00:1f.5: reg 10 io port: [0x3148-0x314f]
pci 0000:00:1f.5: reg 14 io port: [0x3164-0x3167]
pci 0000:00:1f.5: reg 18 io port: [0x3140-0x3147]
pci 0000:00:1f.5: reg 1c io port: [0x3160-0x3163]
pci 0000:00:1f.5: reg 20 io port: [0x3110-0x311f]
pci 0000:00:1f.5: reg 24 io port: [0x3100-0x310f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:02:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfff80000-0xffffffff]
pci 0000:00:03.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:06:00.0: reg 10 io port: [0x1018-0x101f]
pci 0000:06:00.0: reg 14 io port: [0x1024-0x1027]
pci 0000:06:00.0: reg 18 io port: [0x1010-0x1017]
pci 0000:06:00.0: reg 1c io port: [0x1020-0x1023]
pci 0000:06:00.0: reg 20 io port: [0x1000-0x100f]
pci 0000:06:00.0: reg 24 32bit mmio: [0xd3100000-0xd31003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd3100000-0xd31fffff]
pci 0000:07:03.0: reg 10 32bit mmio: [0xd3004000-0xd30047ff]
pci 0000:07:03.0: reg 14 32bit mmio: [0xd3000000-0xd3003fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xd3000000-0xd30fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x500-0x53f has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x680-0x6ff has been reserved
pci 0000:02:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: 0x2000-0x2fff
pci 0000:00:03.0:   MEM window: 0xd0000000-0xd2ffffff
pci 0000:00:03.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0:   IO window: disabled
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: disabled
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4:   IO window: 0x1000-0x1fff
pci 0000:00:1c.4:   MEM window: 0xd3100000-0xd31fffff
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xd3000000-0xd30fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd2ffffff]
pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0xd3100000-0xd31fffff]
pci_bus 0000:07: resource 1 mem: [0xd3000000-0xd30fffff]
pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Scanning for low memory corruption every 60 seconds
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 11948
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90005b00000, using 10240k, total 14336k
vesafb: mode is 1280x1024x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: no devices on the port
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
ahci 0000:06:00.0: version 3.0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x3158 ctl 0x316c bmdma 0x3130 irq 19
ata2: SATA max UDMA/133 cmd 0x3150 ctl 0x3168 bmdma 0x3138 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x3148 ctl 0x3164 bmdma 0x3110 irq 18
ata4: SATA max UDMA/133 cmd 0x3140 ctl 0x3160 bmdma 0x3118 irq 18
pata_marvell 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:06:00.0: setting latency timer to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 16
ata6: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 16
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
aoe: AoE v47 initialised.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL00, max UDMA/100
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AC0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
 sdb:
sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH22LS50  TL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
 sdc:
sr 1:0:1:0: Attached scsi CD-ROM sr0
 sdb1 < sdb5 sdc1 < sdc5 sdb6 sdc6 sdb7 >
sd 0:0:1:0: [sdb] Attached SCSI disk
 sdc7 >
sd 1:0:0:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
REISERFS (device sda1): found reiserfs format "3.6" with standard journal
REISERFS (device sda1): using ordered data mode
REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda1): checking transaction log (sda1)
REISERFS (device sda1): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
Freeing unused kernel memory: 560k freed
Write protecting the kernel read-only data: 5152k
udev: starting version 151
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
sr 1:0:1:0: Attached scsi generic sg3 type 5
Monitor-Mwait will be used to enter C-1 state
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
processor LNXCPU:02: registered as cooling_device2
ACPI: Processor [CPU2] (supports 8 throttling states)
processor LNXCPU:03: registered as cooling_device3
ACPI: Processor [CPU3] (supports 8 throttling states)
processor LNXCPU:04: registered as cooling_device4
ACPI: Processor [CPU4] (supports 8 throttling states)
processor LNXCPU:05: registered as cooling_device5
ACPI: Processor [CPU5] (supports 8 throttling states)
processor LNXCPU:06: registered as cooling_device6
ACPI: Processor [CPU6] (supports 8 throttling states)
processor LNXCPU:07: registered as cooling_device7
ACPI: Processor [CPU7] (supports 8 throttling states)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
Real Time Clock Driver v1.12b
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:a3:9f:c3
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3221000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.12-rt21 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3220000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.12-rt21 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00003080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31.12-rt21 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci1394 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[d3004000-d30047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 1-4: new high speed USB device using ehci_hcd and address 3
md: bind<sdc6>
md: bind<sdc5>
md: bind<sdb5>
usb 1-4: New USB device found, idVendor=0424, idProduct=2502
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.29  Wed Dec  8 12:08:56 PST 2010
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
md: raid1 personality registered for level 1
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 300000477184
 md1: unknown partition table
md: bind<sdc7>
md: bind<sdb7>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 400200892416
 md3: unknown partition table
md: bind<sdb6>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 300000477184
 md2: unknown partition table
usb 3-5: new high speed USB device using ehci_hcd and address 3
usb 3-5: New USB device found, idVendor=1058, idProduct=0704
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5: Product: External HDD   
usb 3-5: Manufacturer: Western Digital
usb 3-5: SerialNumber: 57442D575848583038393234303931
usb 3-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=0582, idProduct=0011
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: EDIROL UA-5
usb 4-1: Manufacturer: Roland
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver snd-usb-audio
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270002481727]
usb 5-2: new low speed USB device using uhci_hcd and address 2
fuse init (API version 7.12)
vboxdrv: Found 8 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0bd29c0
vboxdrv: fAsync=0 offMin=0x1f4 offMax=0x1830
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
usb 5-2: New USB device found, idVendor=0463, idProduct=ffff
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 5-2: Product: PROTECTIONCENTER
usb 5-2: Manufacturer: MGE UPS SYSTEMS
usb 5-2: SerialNumber: 1H4F2902W
usb 5-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
REISERFS (device sda5): found reiserfs format "3.6" with standard journal
REISERFS (device sda5): using ordered data mode
REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda5): checking transaction log (sda5)
REISERFS (device sda5): Using r5 hash to sort names
REISERFS (device sda6): found reiserfs format "3.6" with standard journal
REISERFS (device sda6): using ordered data mode
REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda6): checking transaction log (sda6)
REISERFS (device sda6): Using r5 hash to sort names
usb 6-2: new low speed USB device using uhci_hcd and address 2
EXT4-fs (md1): barriers enabled
kjournald2 starting: pid 1431, dev md1:8, commit interval 5 seconds
EXT4-fs (md1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (md1): internal journal on md1:8
EXT4-fs (md1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (md1): mounted filesystem with ordered data mode
XFS mounting filesystem sda7
usb 6-2: New USB device found, idVendor=0d3d, idProduct=0001
usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-2: Product: USBPS2
usb 6-2: configuration #1 chosen from 1 choice
Ending clean XFS mount for filesystem: sda7
EXT4-fs (md2): barriers enabled
kjournald2 starting: pid 1449, dev md2:8, commit interval 5 seconds
EXT4-fs (md2): internal journal on md2:8
EXT4-fs (md2): delayed allocation enabled
EXT4-fs: mballoc enabled
EXT4-fs (md2): mounted filesystem with ordered data mode
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
usb 8-2: new low speed USB device using uhci_hcd and address 2
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
usb 8-2: New USB device found, idVendor=046d, idProduct=c03d
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB-PS/2 Optical Mouse
usb 8-2: Manufacturer: Logitech
usb 8-2: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 5
usb 1-4.1: New USB device found, idVendor=0424, idProduct=2504
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4.1: configuration #1 chosen from 1 choice
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 4 ports detected
usb 1-4.2: new high speed USB device using ehci_hcd and address 6
Adding 1951856k swap on /dev/sda8.  Priority:-1 extents:1 across:1951856k
usb 1-4.2: New USB device found, idVendor=0424, idProduct=223a
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.2: Product: USB2223
usb 1-4.2: Manufacturer: SMSC
usb 1-4.2: SerialNumber: 000223223223
usb 1-4.2: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 1-4.1.2: new full speed USB device using ehci_hcd and address 7
usb 1-4.1.2: New USB device found, idVendor=0a5c, idProduct=200a
usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.2: Product: BCM92035DGROM
usb 1-4.1.2: Manufacturer: Broadcom
usb 1-4.1.2: SerialNumber: 000B0D64817E
usb 1-4.1.2: configuration #1 chosen from 1 choice
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     WD       3200BMV External 1.75 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sd 6:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sd 6:0:0:0: [sdd] Attached SCSI disk
generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.00 Device [MGE UPS SYSTEMS PROTECTIONCENTER] on usb-0000:00:1a.2-2/input0
input: USBPS2 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
generic-usb 0003:0D3D:0001.0002: input,hidraw1: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-2/input0
input: USBPS2 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input3
generic-usb 0003:0D3D:0001.0003: input,hidraw2: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-2/input1
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
generic-usb 0003:046D:C03D.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access     SMSC     223 U HS-CF      3.60 PQ: 0 ANSI: 0
scsi 7:0:0:1: Direct-Access     SMSC     223 U HS-MS      3.60 PQ: 0 ANSI: 0
scsi 7:0:0:2: Direct-Access     SMSC     223 U HS-SM      3.60 PQ: 0 ANSI: 0
scsi 7:0:0:3: Direct-Access     SMSC     223 U HS-SD/MMC  3.60 PQ: 0 ANSI: 0
sd 7:0:0:0: Attached scsi generic sg5 type 0
sd 7:0:0:1: Attached scsi generic sg6 type 0
sd 7:0:0:2: Attached scsi generic sg7 type 0
sd 7:0:0:3: Attached scsi generic sg8 type 0
sd 7:0:0:0: [sde] Attached SCSI removable disk
sd 7:0:0:2: [sdg] Attached SCSI removable disk
sd 7:0:0:3: [sdh] Attached SCSI removable disk
sd 7:0:0:1: [sdf] Attached SCSI removable disk
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bridge firewalling registered
device eth0 entered promiscuous mode
device tap0 entered promiscuous mode
br0: port 2(tap0) entering learning state
br0: port 1(eth0) entering learning state
br0: port 2(tap0) entering forwarding state
br0: port 1(eth0) entering forwarding state
NVRM: Xid (0002:00): 51
XFS mounting filesystem sdd1
Ending clean XFS mount for filesystem: sdd1
[root@corei7 thomas]$


Mon système marche parfaitement c'est ce qui est le plus étonnant ...
Back to top
View user's profile Send private message
Ascodas
Apprentice
Apprentice


Joined: 18 Nov 2004
Posts: 259

PostPosted: Sun Jan 16, 2011 6:38 pm    Post subject: Reply with quote

Code:
[root@corei7 thomas]$ cat /proc/mdstat
Personalities : [raid1]
md3 : active raid1 sdb7[0] sdc7[1]
      390821184 blocks [2/2] [UU]
     
md1 : active raid1 sdb5[0] sdc5[1]
      292969216 blocks [2/2] [UU]
     
md2 : active raid1 sdb6[0] sdc6[1]
      292969216 blocks [2/2] [UU]
     
unused devices: <none>
[root@corei7 thomas]$ lvs
  No volume groups found
[root@corei7 thomas]$ vgscan
  Reading all physical volumes.  This may take a while...
  No volume groups found
[root@corei7 thomas]$ vgchange -a y
  No volume groups found
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum