| View previous topic :: View next topic |
| Author |
Message |
piggy1983
n00b
Joined: 28 Aug 2010
Posts: 5
|
 Posted: Sat Aug 28, 2010 1:12 pm Post subject: Local login delay is very long when no network available. |
 |
|
When the network is connected to the Internet, this delay will about 1-2 seconds.
I don't know what packages I have installed that would cause this problem.
When I change the password, my system will ask me to type the same new password four times.
| Code: |
zzzzz#passwd
Password:
Retype new password:
Enter new password:
Retype new password:
passwd: password updated successfully
|
The USE of shadow package is USE="audit cracklib nls pam skey"
I don't know if my system is OK, or it haved been infected by virus. |
|
| Back to top |
|
 |
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
|
| Back to top |
|
|
piggy1983
n00b
Joined: 28 Aug 2010
Posts: 5
|
| Posted: Sun Aug 29, 2010 3:30 am Post subject: |
|
|
| audiodef wrote: | If you're not connected and eth0 starts up, you should expect a delay; however, login is PAST this point, so that is odd.
What does dmesg say? |
Network have been connected to the Internet.
| Code: |
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-gentoo-r4 (root@T-Workstation) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5) ) #1 SMP PREEMPT Sat Aug 28 22:38:27 CST 2010
Command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/sda3 init=/linuxrc splash=verbose,theme:natural-gentoo console=tty1 video=nvidiafb:mtrr:3,ywrap quiet vga=0x31B
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bd780000 (usable)
BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data)
BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BE000000 mask FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbd780 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009e800 (usable)
modified: 000000000009e800 - 00000000000a0000 (reserved)
modified: 00000000000e8000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bd780000 (usable)
modified: 00000000bd780000 - 00000000bd78e000 (ACPI data)
modified: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
modified: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
modified: 00000000bd7ed000 - 00000000be000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffa00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000bd780000
0000000000 - 00bd600000 page 2M
00bd600000 - 00bd780000 page 4k
kernel direct mapping tables up to bd780000 @ 16000-1b000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 19000-1f000
RAMDISK: 37b85000 - 37ff0000
ACPI: RSDP 00000000000fa470 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bd780000 0003C (v01 DELL RSDT1345 20100315 MSFT 00000097)
ACPI: FACP 00000000bd780200 00084 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: DSDT 00000000bd7805e0 060AC (v01 A7448 A7448001 00000001 INTL 20051117)
ACPI: FACS 00000000bd78e000 00040
ACPI: APIC 00000000bd780390 0008C (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: MCFG 00000000bd780420 0003C (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: OEMB 00000000bd78e040 00072 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: HPET 00000000bd78a5e0 00038 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: SSDT 00000000bd790b90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880007200000-ffff88000a9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bd780
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1038094
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 757688 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [1a200 - 1a9ff]
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000
PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000
PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000
PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000
PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000
PM: Registered nosave memory: 00000000be000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:40e00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880006a00000 s93120 r8192 d21568 u262144
pcpu-alloc: s93120 r8192 d21568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
early_res array is doubled to 128 at [1aa00 - 1b9ff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1020174
Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/sda3 init=/linuxrc splash=verbose,theme:natural-gentoo console=tty1 video=nvidiafb:mtrr:3,ywrap quiet vga=0x31B
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (66 early reservations)
#1 [0001000000 - 0006907778] TEXT DATA BSS
#2 [0037b85000 - 0037ff0000] RAMDISK
#3 [0006908000 - 00069080f8] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009e800 - 00000fdcd0] BIOS reserved
#7 [00000fde34 - 00000ff780] BIOS reserved
#8 [00000fdcd0 - 00000fde34] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000019000] PGTABLE
#12 [0000019000 - 000001a000] PGTABLE
#13 [0006908100 - 0006909100] BOOTMEM
#14 [000001a000 - 000001a200] BOOTMEM
#15 [000710a000 - 000710b000] BOOTMEM
#16 [000710b000 - 000710c000] BOOTMEM
#17 [0007200000 - 000aa00000] MEMMAP 0
#18 [0006909100 - 0006921100] BOOTMEM
#19 [0006921100 - 0006939100] BOOTMEM
#20 [0006939100 - 0006951100] BOOTMEM
#21 [0006952000 - 0006953000] BOOTMEM
#22 [0006907780 - 00069077c1] BOOTMEM
#23 [0006907800 - 0006907843] BOOTMEM
#24 [0006907880 - 0006907b20] BOOTMEM
#25 [0006907b40 - 0006907ba8] BOOTMEM
#26 [0006907bc0 - 0006907c28] BOOTMEM
#27 [0006907c40 - 0006907ca8] BOOTMEM
#28 [0006907cc0 - 0006907d28] BOOTMEM
#29 [0006907d40 - 0006907da8] BOOTMEM
#30 [0006907dc0 - 0006907e28] BOOTMEM
#31 [0006907e40 - 0006907ea8] BOOTMEM
#32 [0006907ec0 - 0006907f28] BOOTMEM
#33 [0006907f40 - 0006907fa8] BOOTMEM
#34 [0006951100 - 0006951168] BOOTMEM
#35 [0006951180 - 00069511e8] BOOTMEM
#36 [0006907fc0 - 0006907fe0] BOOTMEM
#37 [0006951200 - 0006951220] BOOTMEM
#38 [0006951240 - 00069512dd] BOOTMEM
#39 [0006951300 - 000695139d] BOOTMEM
#40 [0006a00000 - 0006a1e000] BOOTMEM
#41 [0006a40000 - 0006a5e000] BOOTMEM
#42 [0006a80000 - 0006a9e000] BOOTMEM
#43 [0006ac0000 - 0006ade000] BOOTMEM
#44 [0006b00000 - 0006b1e000] BOOTMEM
#45 [0006b40000 - 0006b5e000] BOOTMEM
#46 [0006b80000 - 0006b9e000] BOOTMEM
#47 [0006bc0000 - 0006bde000] BOOTMEM
#48 [00069513c0 - 00069513c8] BOOTMEM
#49 [0006951400 - 0006951408] BOOTMEM
#50 [0006951440 - 0006951460] BOOTMEM
#51 [0006951480 - 00069514c0] BOOTMEM
#52 [00069514c0 - 00069515e0] BOOTMEM
#53 [0006951600 - 0006951648] BOOTMEM
#54 [0006951680 - 00069516c8] BOOTMEM
#55 [0006951700 - 0006951900] BOOTMEM
#56 [0006951900 - 0006951b00] BOOTMEM
#57 [0006951b00 - 0006951d00] BOOTMEM
#58 [0006951d00 - 0006951f00] BOOTMEM
#59 [0006953000 - 000695b000] BOOTMEM
#60 [0006bde000 - 0006fde000] BOOTMEM
#61 [000aa00000 - 000ac00000] BOOTMEM
#62 [000ac00000 - 000ec00000] BOOTMEM
#63 [000695b000 - 000697b000] BOOTMEM
#64 [000697b000 - 00069bb000] BOOTMEM
#65 [000001ba00 - 0000023a00] BOOTMEM
Memory: 3925896k/5242880k available (5376k kernel code, 1090504k absent, 226480k reserved, 13926k data, 568k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352
Console: colour dummy device 80x25
console [tty1] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2792.713 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.15 BogoMIPS (lpj=9309043)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (44703.71 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: generic_sse
generic_sse: 10394.400 MB/sec
xor: using function: generic_sse (10394.400 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bd78e0c0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bd790510 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbe000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf7fffc00-0xf7fffc0f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7c00000-0xf7c003ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7a00000-0xf7a003ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xdc00-0xdc07]
pci 0000:00:1f.2: reg 14: [io 0xd880-0xd883]
pci 0000:00:1f.2: reg 18: [io 0xd800-0xd807]
pci 0000:00:1f.2: reg 1c: [io 0xd480-0xd483]
pci 0000:00:1f.2: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7800000-0xf78007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7fff800-0xf7fff8ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:01:00.0: reg 30: [mem 0xfbe80000-0xfbefffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1 2483 MB/s
raid6: int64x2 2967 MB/s
raid6: int64x4 2179 MB/s
raid6: int64x8 2165 MB/s
raid6: sse2x1 6926 MB/s
raid6: sse2x2 8160 MB/s
raid6: sse2x4 8928 MB/s
raid6: using algorithm sse2x4 (8928 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000bd780000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io 0x0a00-0x0adf] has been reserved
system 00:07: [io 0x0ae0-0x0aef] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbdffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xbe000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4524k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000ac00000 - ffff88000ec00000
software IO TLB at phys 0xac00000 - 0xec00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1283039091.263:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 7676
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
Linux agpgart interface v0.103
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010680000, using 10240k, total 14336k
vesafb: mode is 1280x1024x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800380 irq 47
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c00000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-gentoo-r4 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7a00000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-gentoo-r4 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST3500418AS, CC45, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC45 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.1: new low speed USB device using ehci_hcd and address 3
usb 2-1.1: New USB device found, idVendor=413c, idProduct=2106
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Dell QuietKey Keyboard
usb 2-1.1: Manufacturer: DELL
usb 2-1.2: new low speed USB device using ehci_hcd and address 4
usb 2-1.2: New USB device found, idVendor=0461, idProduct=4d22
usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
usb 2-1.5: new high speed USB device using ehci_hcd and address 5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100
ata3.00: configured for UDMA/100
usb 2-1.5: New USB device found, idVendor=6780, idProduct=6781
usb 2-1.5: New USB device strings: Mfr=1, Product=11, SerialNumber=3
usb 2-1.5: Product: aigo External Storage
usb 2-1.5: Manufacturer: JMicron
usb 2-1.5: SerialNumber: 0000000000000000
scsi6 : usb-storage 2-1.5:1.0
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH50N B103 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 568k freed
scsi 6:0:0:0: Direct-Access aigo External Storage PQ: 0 ANSI: 2 CCS
scsi7 : pata_legacy
ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi8 : pata_legacy
ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.15
Fusion MPT FC Host driver 3.04.15
Fusion MPT SAS Host driver 3.04.15
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[26400]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
QLogic Fibre Channel HBA Driver: 8.03.02-k2
Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver hiddev
input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input0
generic-usb 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.1/input0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
fuse init (API version 7.14)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
tg3.c:v3.110 (April 9, 2010)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 mdio bus: probed
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address a4:ba:db:fd:64:ef
tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev: starting version 161
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI: acpi_idle yielding to intel_idle
input: PC Speaker as /devices/platform/pcspkr/input/input4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb 0000:01:00.0: BAR 3: can't reserve [mem 0xf8000000-0xf9ffffff 64bit]
nvidiafb: cannot request PCI regions
hda_codec: ALC662 rev1: BIOS auto-probing.
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
EXT4-fs (sda3): re-mounted. Opts: user_xattr
fbcondecor: console 0 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 5
tg3 0000:02:00.0: irq 49 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is down
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmmon[13300]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[13300]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[13300]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[13300]: Module vmmon: initialized
/dev/vmci[13300]: VMCI: Driver initialized.
/dev/vmci[13300]: Module vmci: registered with major=10 minor=56
/dev/vmci[13300]: Module vmci: initialized
/dev/vmnet: open called by PID 13306 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 13313 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 13315 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 13318 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 13322 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 13323 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
conftest[4116]: segfault at ffffffff9b680ff8 ip 00002ac79b8f88b9 sp 00007ffff328baa0 error 4 in libc-2.12.1.so[2ac79b881000+15c000]
|
Last edited by piggy1983 on Sun Aug 29, 2010 3:45 am; edited 1 time in total |
|
| Back to top |
|
|
piggy1983
n00b
Joined: 28 Aug 2010
Posts: 5
|
| Posted: Sun Aug 29, 2010 3:44 am Post subject: |
|
|
| audiodef wrote: | If you're not connected and eth0 starts up, you should expect a delay; however, login is PAST this point, so that is odd.
What does dmesg say? |
New boot, no network.
| Code: |
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-gentoo-r4 (root@T-Workstation) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5) ) #1 SMP PREEMPT Sat Aug 28 22:38:27 CST 2010
Command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/sda3 init=/linuxrc splash=verbose,theme:natural-gentoo console=tty1 video=nvidiafb:mtrr:3,ywrap quiet vga=0x31B
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bd780000 (usable)
BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data)
BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BE000000 mask FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbd780 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009e800 (usable)
modified: 000000000009e800 - 00000000000a0000 (reserved)
modified: 00000000000e8000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bd780000 (usable)
modified: 00000000bd780000 - 00000000bd78e000 (ACPI data)
modified: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
modified: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
modified: 00000000bd7ed000 - 00000000be000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffa00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000bd780000
0000000000 - 00bd600000 page 2M
00bd600000 - 00bd780000 page 4k
kernel direct mapping tables up to bd780000 @ 16000-1b000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 19000-1f000
RAMDISK: 37b85000 - 37ff0000
ACPI: RSDP 00000000000fa470 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bd780000 0003C (v01 DELL RSDT1345 20100315 MSFT 00000097)
ACPI: FACP 00000000bd780200 00084 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: DSDT 00000000bd7805e0 060AC (v01 A7448 A7448001 00000001 INTL 20051117)
ACPI: FACS 00000000bd78e000 00040
ACPI: APIC 00000000bd780390 0008C (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: MCFG 00000000bd780420 0003C (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: OEMB 00000000bd78e040 00072 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: HPET 00000000bd78a5e0 00038 (v01 DELL MI09 20100315 MSFT 00000097)
ACPI: SSDT 00000000bd790b90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880007200000-ffff88000a9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bd780
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1038094
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 757688 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [1a200 - 1a9ff]
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000
PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000
PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000
PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000
PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000
PM: Registered nosave memory: 00000000be000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:40e00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880006a00000 s93120 r8192 d21568 u262144
pcpu-alloc: s93120 r8192 d21568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
early_res array is doubled to 128 at [1aa00 - 1b9ff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1020174
Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/sda3 init=/linuxrc splash=verbose,theme:natural-gentoo console=tty1 video=nvidiafb:mtrr:3,ywrap quiet vga=0x31B
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (66 early reservations)
#1 [0001000000 - 0006907778] TEXT DATA BSS
#2 [0037b85000 - 0037ff0000] RAMDISK
#3 [0006908000 - 00069080f8] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009e800 - 00000fdcd0] BIOS reserved
#7 [00000fde34 - 00000ff780] BIOS reserved
#8 [00000fdcd0 - 00000fde34] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000019000] PGTABLE
#12 [0000019000 - 000001a000] PGTABLE
#13 [0006908100 - 0006909100] BOOTMEM
#14 [000001a000 - 000001a200] BOOTMEM
#15 [000710a000 - 000710b000] BOOTMEM
#16 [000710b000 - 000710c000] BOOTMEM
#17 [0007200000 - 000aa00000] MEMMAP 0
#18 [0006909100 - 0006921100] BOOTMEM
#19 [0006921100 - 0006939100] BOOTMEM
#20 [0006939100 - 0006951100] BOOTMEM
#21 [0006952000 - 0006953000] BOOTMEM
#22 [0006907780 - 00069077c1] BOOTMEM
#23 [0006907800 - 0006907843] BOOTMEM
#24 [0006907880 - 0006907b20] BOOTMEM
#25 [0006907b40 - 0006907ba8] BOOTMEM
#26 [0006907bc0 - 0006907c28] BOOTMEM
#27 [0006907c40 - 0006907ca8] BOOTMEM
#28 [0006907cc0 - 0006907d28] BOOTMEM
#29 [0006907d40 - 0006907da8] BOOTMEM
#30 [0006907dc0 - 0006907e28] BOOTMEM
#31 [0006907e40 - 0006907ea8] BOOTMEM
#32 [0006907ec0 - 0006907f28] BOOTMEM
#33 [0006907f40 - 0006907fa8] BOOTMEM
#34 [0006951100 - 0006951168] BOOTMEM
#35 [0006951180 - 00069511e8] BOOTMEM
#36 [0006907fc0 - 0006907fe0] BOOTMEM
#37 [0006951200 - 0006951220] BOOTMEM
#38 [0006951240 - 00069512dd] BOOTMEM
#39 [0006951300 - 000695139d] BOOTMEM
#40 [0006a00000 - 0006a1e000] BOOTMEM
#41 [0006a40000 - 0006a5e000] BOOTMEM
#42 [0006a80000 - 0006a9e000] BOOTMEM
#43 [0006ac0000 - 0006ade000] BOOTMEM
#44 [0006b00000 - 0006b1e000] BOOTMEM
#45 [0006b40000 - 0006b5e000] BOOTMEM
#46 [0006b80000 - 0006b9e000] BOOTMEM
#47 [0006bc0000 - 0006bde000] BOOTMEM
#48 [00069513c0 - 00069513c8] BOOTMEM
#49 [0006951400 - 0006951408] BOOTMEM
#50 [0006951440 - 0006951460] BOOTMEM
#51 [0006951480 - 00069514c0] BOOTMEM
#52 [00069514c0 - 00069515e0] BOOTMEM
#53 [0006951600 - 0006951648] BOOTMEM
#54 [0006951680 - 00069516c8] BOOTMEM
#55 [0006951700 - 0006951900] BOOTMEM
#56 [0006951900 - 0006951b00] BOOTMEM
#57 [0006951b00 - 0006951d00] BOOTMEM
#58 [0006951d00 - 0006951f00] BOOTMEM
#59 [0006953000 - 000695b000] BOOTMEM
#60 [0006bde000 - 0006fde000] BOOTMEM
#61 [000aa00000 - 000ac00000] BOOTMEM
#62 [000ac00000 - 000ec00000] BOOTMEM
#63 [000695b000 - 000697b000] BOOTMEM
#64 [000697b000 - 00069bb000] BOOTMEM
#65 [000001ba00 - 0000023a00] BOOTMEM
Memory: 3925896k/5242880k available (5376k kernel code, 1090504k absent, 226480k reserved, 13926k data, 568k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352
Console: colour dummy device 80x25
console [tty1] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2792.887 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5588.51 BogoMIPS (lpj=9309623)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (44704.13 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: generic_sse
generic_sse: 10394.400 MB/sec
xor: using function: generic_sse (10394.400 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bd78e0c0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bd790510 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbe000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf7fffc00-0xf7fffc0f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7c00000-0xf7c003ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7a00000-0xf7a003ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xdc00-0xdc07]
pci 0000:00:1f.2: reg 14: [io 0xd880-0xd883]
pci 0000:00:1f.2: reg 18: [io 0xd800-0xd807]
pci 0000:00:1f.2: reg 1c: [io 0xd480-0xd483]
pci 0000:00:1f.2: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7800000-0xf78007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7fff800-0xf7fff8ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:01:00.0: reg 30: [mem 0xfbe80000-0xfbefffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1 2480 MB/s
raid6: int64x2 2968 MB/s
raid6: int64x4 2179 MB/s
raid6: int64x8 2166 MB/s
raid6: sse2x1 6943 MB/s
raid6: sse2x2 8172 MB/s
raid6: sse2x4 9007 MB/s
raid6: using algorithm sse2x4 (9007 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000bd780000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io 0x0a00-0x0adf] has been reserved
system 00:07: [io 0x0ae0-0x0aef] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbdffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xbe000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4524k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000ac00000 - ffff88000ec00000
software IO TLB at phys 0xac00000 - 0xec00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1283081818.263:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 7676
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
Linux agpgart interface v0.103
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010680000, using 10240k, total 14336k
vesafb: mode is 1280x1024x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800380 irq 47
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c00000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-gentoo-r4 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7a00000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-gentoo-r4 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST3500418AS, CC45, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC45 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.1: new low speed USB device using ehci_hcd and address 3
usb 2-1.1: New USB device found, idVendor=413c, idProduct=2106
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Dell QuietKey Keyboard
usb 2-1.1: Manufacturer: DELL
usb 2-1.2: new low speed USB device using ehci_hcd and address 4
usb 2-1.2: New USB device found, idVendor=0461, idProduct=4d22
usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
usb 2-1.5: new high speed USB device using ehci_hcd and address 5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100
ata3.00: configured for UDMA/100
usb 2-1.5: New USB device found, idVendor=6780, idProduct=6781
usb 2-1.5: New USB device strings: Mfr=1, Product=11, SerialNumber=3
usb 2-1.5: Product: aigo External Storage
usb 2-1.5: Manufacturer: JMicron
usb 2-1.5: SerialNumber: 0000000000000000
scsi6 : usb-storage 2-1.5:1.0
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH50N B103 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 568k freed
scsi 6:0:0:0: Direct-Access aigo External Storage PQ: 0 ANSI: 2 CCS
scsi7 : pata_legacy
ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi8 : pata_legacy
ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.15
Fusion MPT FC Host driver 3.04.15
Fusion MPT SAS Host driver 3.04.15
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[26400]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
QLogic Fibre Channel HBA Driver: 8.03.02-k2
Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver hiddev
input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input0
generic-usb 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.1/input0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
fuse init (API version 7.14)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
tg3.c:v3.110 (April 9, 2010)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 mdio bus: probed
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address a4:ba:db:fd:64:ef
tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev: starting version 161
ACPI: acpi_idle yielding to intel_idle
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
input: PC Speaker as /devices/platform/pcspkr/input/input4
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb 0000:01:00.0: BAR 3: can't reserve [mem 0xf8000000-0xf9ffffff 64bit]
nvidiafb: cannot request PCI regions
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hda_codec: ALC662 rev1: BIOS auto-probing.
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
EXT4-fs (sda3): re-mounted. Opts: user_xattr
fbcondecor: console 0 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 5
tg3 0000:02:00.0: irq 49 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
tg3 0000:02:00.0: eth0: Link is down
/dev/vmmon[13298]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[13298]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[13298]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
/dev/vmmon[13298]: Module vmmon: initialized
/dev/vmci[13298]: VMCI: Driver initialized.
/dev/vmci[13298]: Module vmci: registered with major=10 minor=56
/dev/vmci[13298]: Module vmci: initialized
/dev/vmnet: open called by PID 13312 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 13314 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 13317 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 13321 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 13322 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
fbcondecor: console 0 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 0 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 0 using theme 'natural-gentoo'
fbcondecor: switched decor state to 'on' on console 0
|
|
|
| Back to top |
|
|
your_WooDness
Tux's lil' helper
Joined: 25 Oct 2007
Posts: 77
|
| Posted: Sun Aug 29, 2010 8:34 am Post subject: |
|
|
Hi,
maybe you have installed kerberos/ldap. If yes it could be that the pam module /etc/pam.d/system.auth has entries with pam_krb5.so. If you do not use ldap/kerberos, which is very likely, you can savely comment the lines out with pam_krb5.so.
WooD |
|
| Back to top |
|
|
piggy1983
n00b
Joined: 28 Aug 2010
Posts: 5
|
| Posted: Sun Aug 29, 2010 1:53 pm Post subject: |
|
|
| your_WooDness wrote: | Hi,
maybe you have installed kerberos/ldap. If yes it could be that the pam module /etc/pam.d/system.auth has entries with pam_krb5.so. If you do not use ldap/kerberos, which is very likely, you can savely comment the lines out with pam_krb5.so.
WooD |
I installed the packages mit-krb5 and openldap. But my another GENTOO system was builded before has the same USE in make.conf (both have kerberos and ldap in USE), there is no problem for that system. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
