Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
xorg-server-1.8.1-r1 and intel drivers [SOLVED]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
NathanZachary
Moderator
Moderator


Joined: 30 Jan 2007
Posts: 2605

PostPosted: Wed Jun 09, 2010 6:06 am    Post subject: xorg-server-1.8.1-r1 and intel drivers [SOLVED] Reply with quote

Hello all,

I'm in the process of a clean install on my netbook, and I'm running into the "No kernel modesetting driver detected" error when trying to start X. I have xorg-server-1.8.1-r1 and xf86-video-intel-2.11.0 installed, and I do have my kernel configured for KMS:

Code:

# cat /usr/src/linux/.config | grep KMS
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_I915_KMS=y


I'm currently running without an xorg.conf, and can't seem to find the problem here. My /var/log/Xorg.0.log indicates:

Code:

(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
             no screens found


I have tried following the information in the wiki by adding the appropriate device section in xorg.conf, but to no avail.

Any help would be greatly appreciated. Thank you preemptively. :)
_________________
“Truth, like infinity, is to be forever approached but never reached.” --Jean Ayres (1972)
---avatar cropped from =AimanStudio---


Last edited by NathanZachary on Wed Jun 09, 2010 2:38 pm; edited 1 time in total
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Wed Jun 09, 2010 7:15 am    Post subject: Reply with quote

A few people here have already claimed, that kernel mode setting is not working
with xorg-server 1.8 - can neither confirm nor deny it, as I don't have an intel card.

But lets try standard steps.
- pastebin full xorg log
- make sure CONFIG_FRAMEBUFFER_CONSOLE is set (perhaps even to 'y')
- try to rebuild libdrm, driver, mesa (in that order, pay attention to the useflags too)
Back to top
View user's profile Send private message
96140
Retired Dev
Retired Dev


Joined: 23 Jan 2005
Posts: 1324

PostPosted: Wed Jun 09, 2010 7:47 am    Post subject: Reply with quote

--

Last edited by 96140 on Wed Sep 11, 2013 8:40 am; edited 1 time in total
Back to top
View user's profile Send private message
albright
Advocate
Advocate


Joined: 16 Nov 2003
Posts: 2588
Location: Near Toronto

PostPosted: Wed Jun 09, 2010 11:36 am    Post subject: Reply with quote

FWIW, I had to downgrade to xorg-server-1.7.7 with my intel
card (GM965/GL960). I was getting many problems including
hard lockups. 1.7.7 seems to work pretty well though.
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme)
Back to top
View user's profile Send private message
NathanZachary
Moderator
Moderator


Joined: 30 Jan 2007
Posts: 2605

PostPosted: Wed Jun 09, 2010 2:37 pm    Post subject: Reply with quote

Thank you to all for the suggestions!

Firstly, @VoidMage,
Yes, CONFIG_FRAMEBUFFER_CONSOLE=y. I have rebuilt libdrm, xf86-video-intel, and mesa in that order. Sadly, no avail.

Secondly, @nightmorph,
Running eselect opengl set xorg-x11 did the trick. I had set it yesterday, and rebuilt everything related to X (drivers, mesa, video & input drivers), but that didn't help. However, going through today and simply re-setting opengl solved the problem. Thank you very much for the suggestion!

Again, thanks to all for the help. :)
_________________
“Truth, like infinity, is to be forever approached but never reached.” --Jean Ayres (1972)
---avatar cropped from =AimanStudio---
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum