Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] ... sorta...linux-2.6.32-gentoo-r7 with rt2800usb
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
imbiea
Tux's lil' helper
Tux's lil' helper


Joined: 23 Nov 2004
Posts: 91
Location: Colorado Rockies

PostPosted: Thu Apr 22, 2010 10:51 pm    Post subject: [SOLVED] ... sorta...linux-2.6.32-gentoo-r7 with rt2800usb Reply with quote

I've posted this in the serial monkey forum as well, but thought I'd throw this out here too to see if some of the great gentoo minds can take a stab at this as well. I've gotten this card to work via a hacked 2.6.31r3 kernel with some hacked staging drivers, (https://forums.gentoo.org/viewtopic-t-774956-highlight-rt3070.html ) but performance is spotty, and I've been trying on/off for months to get this working with the rt2x00 drivers, but have not had luck.

Since the 2.6.32-gentoo-r7 kernel became stable for x86 I thought I've give it another shot.

the device shows up after a boot into the new kernel, but I can't configure it. The device shows up with a txpower of 8, and I can't change it, and it wont' find any access points at all, but here are my logs ... Ideas/suggestions are greatly appreciated! :-)

Thanks!




Quote:


Apr 22 16:30:37 foxtop kernel: hub 1-1.4:1.0: port 3, status 0101, change 0001, 12 Mb/s
Apr 22 16:30:37 foxtop kernel: hub 1-1.4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: new high speed USB device using ehci_hcd and address 12
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: default language 0x0409
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: udev 12, busnum 1, minor = 11
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: New USB device found, idVendor=1737, idProduct=0077
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: Product: 802.11 g WLAN
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: Manufacturer: Ralink
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: SerialNumber: 1.0
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: uevent
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: usb_probe_device
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: configuration #1 chosen from 1 choice
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: adding 1-1.4.3:1.0 (config #1, interface 0)
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3:1.0: uevent
Apr 22 16:30:37 foxtop kernel: rt2800usb 1-1.4.3:1.0: usb_probe_interface
Apr 22 16:30:37 foxtop kernel: rt2800usb 1-1.4.3:1.0: usb_probe_interface - got id
Apr 22 16:30:37 foxtop kernel: usb 1-1.4.3: uevent
Apr 22 16:30:37 foxtop kernel: phy3 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0006, rev: 30700200.
Apr 22 16:30:37 foxtop kernel: phy3: Selected rate control algorithm 'minstrel'
Apr 22 16:30:37 foxtop kernel: Registered led device: rt2800usb-phy3::radio
Apr 22 16:30:37 foxtop kernel: Registered led device: rt2800usb-phy3::assoc
Apr 22 16:30:37 foxtop kernel: Registered led device: rt2800usb-phy3::quality
Apr 22 16:30:37 foxtop kernel: drivers/usb/core/inode.c: creating file '012'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.795 [I] osspec.c:251: SEQNUM=1243, ACTION=add, SUBSYSTEM=usb, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3, DEVNAME=/dev/bus/usb/001/012, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.795 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.795 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3 is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.795 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.795 [I] device.c:4905: add_dev: subsys=usb sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3 dev=/dev/bus/usb/001/012 parent_dev=0x0817bb00
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.802 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.803 [D] device_store.c:516: adding 0x819afd0 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3)

Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.803 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.804 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.804 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.805 [I] osspec.c:251: SEQNUM=1244, ACTION=add, SUBSYSTEM=usb, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.805 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.805 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0 is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.805 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.805 [I] device.c:4905: add_dev: subsys=usb sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0 dev= parent_dev=0x0819afd0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.808 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.808 [D] device_store.c:516: adding 0x819ae10 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.808 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.809 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.809 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.810 [I] osspec.c:251: SEQNUM=1245, ACTION=add, SUBSYSTEM=ieee80211, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.810 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.810 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3 is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.810 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.810 [I] device.c:4905: add_dev: subsys=ieee80211 sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3 dev= parent_dev=0x0819ae10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [I] osspec.c:251: SEQNUM=1246, ACTION=add, SUBSYSTEM=rfkill, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3 is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.811 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.812 [I] device.c:4905: add_dev: subsys=rfkill sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3 dev= parent_dev=0x0819ae10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.813 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0_rfkill_phy3_wlan
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.813 [D] device_store.c:516: adding 0x819ad00 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.813 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0_rfkill_phy3_wlan
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.815 [I] hald_dbus.c:3556: Started singleton addon hald-addon-rfkill-killswitch for udi /org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0_rfkill_phy3_wlan
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.815 [D] hald_dbus.c:3572: singleton not initialised yet
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.815 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.815 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.815 [I] osspec.c:251: SEQNUM=1247, ACTION=change, SUBSYSTEM=rfkill, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] hotplug.c:121: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/ieee80211/phy3/rfkill3 is a device (store)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] device.c:5035: refresh_dev: subsys=rfkill
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] osspec.c:251: SEQNUM=1250, ACTION=add, SUBSYSTEM=leds, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.816 [I] device.c:4905: add_dev: subsys=leds sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc dev= parent_dev=0x0819ae10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.818 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.818 [D] device_store.c:516: adding 0x817dbc0 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::assoc)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.818 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] hald_dbus.c:3556: Started singleton addon hald-addon-leds for udi /org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [D] hald_dbus.c:3572: singleton not initialised yet
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] osspec.c:251: SEQNUM=1251, ACTION=add, SUBSYSTEM=leds, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::quality, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3
/1-1.4.3:1.0/leds/rt2800usb-phy3::quality
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::quality is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::quality'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.821 [I] device.c:4905: add_dev: subsys=leds sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::quality dev= parent_dev=0x0819ae10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.822 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_quality
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.823 [D] device_store.c:516: adding 0x819ad90 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::quality)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.823 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_quality
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.823 [D] hald_dbus.c:3572: singleton not initialised yet
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.824 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.824 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.824 [I] osspec.c:251: SEQNUM=1249, ACTION=add, SUBSYSTEM=leds, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio, DEVNAME=, IFINDEX=0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.825 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.825 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio is a device (subsystem)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.825 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.825 [I] device.c:4905: add_dev: subsys=leds sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio dev= parent_dev=0x0819ae10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_radio
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [D] device_store.c:516: adding 0x8195880 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/leds/rt2800usb-phy3::radio)
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_radio
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [D] hald_dbus.c:3572: singleton not initialised yet
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.826 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.828 [D] hald_dbus.c:3633: singleton_addon_is_ready
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.828 [D] hald_dbus.c:3633: singleton_addon_is_ready
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.829 [I] hald_dbus.c:3660: SingletonAddonIsReady recieved for 'hald-addon-rfkill-killswitch'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.829 [D] hald_dbus.c:3673: Signalling device added for queued devices
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.829 [D] hald_dbus.c:3677: device added for '/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_i
f0_0_rfkill_phy3_wlan'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.829 [D] hald_dbus.c:3473: singleton_signal_device_changed about to send message to connection 0x8
17d3c8
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.831 [D] hald_dbus.c:3267: udi=/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0_rfkill_ph
y3_wlan
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.831 [I] hald_dbus.c:3292: Local connection 0x817d3c8 to handle interface 'org.freedesktop.Hal.Device.KillSwitch' on udi '/org/freedesktop/Hal/devices/usb_device_1737_77_1_0_if0_0_rfkill_phy3_wlan'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.832 [D] hald_dbus.c:3515: incrementing ready addons for device
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.833 [D] hald_dbus.c:3633: singleton_addon_is_ready
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.833 [I] hald_dbus.c:3660: SingletonAddonIsReady recieved for 'hald-addon-leds'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.833 [D] hald_dbus.c:3673: Signalling device added for queued devices
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.834 [D] hald_dbus.c:3677: device added for '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_radio'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.834 [D] hald_dbus.c:3473: singleton_signal_device_changed about to send message to connection 0x8197e10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.834 [D] hald_dbus.c:3677: device added for '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_quality'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.835 [D] hald_dbus.c:3473: singleton_signal_device_changed about to send message to connection 0x8197e10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.835 [D] hald_dbus.c:3677: device added for '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.835 [D] hald_dbus.c:3473: singleton_signal_device_changed about to send message to connection 0x8197e10
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.836 [D] hald_dbus.c:3267: udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_radio
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.836 [I] hald_dbus.c:3292: Local connection 0x8197e10 to handle interface 'org.freedesktop.Hal.Device.Leds' on udi '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_radio'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.837 [D] hald_dbus.c:3515: incrementing ready addons for device
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.837 [D] hald_dbus.c:3267: udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_quality
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.838 [I] hald_dbus.c:3292: Local connection 0x8197e10 to handle interface 'org.freedesktop.Hal.Device.Leds' on udi '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_quality'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.839 [D] hald_dbus.c:3515: incrementing ready addons for device
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.840 [D] hald_dbus.c:3267: udi=/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.840 [I] hald_dbus.c:3292: Local connection 0x8197e10 to handle interface 'org.freedesktop.Hal.Dev
ice.Leds' on udi '/org/freedesktop/Hal/devices/leds_rt2800usb_phy3_assoc'
Apr 22 16:30:37 foxtop hald[4834]: 16:30:37.841 [D] hald_dbus.c:3515: incrementing ready addons for device
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.347 [I] osspec.c:251: SEQNUM=1248, ACTION=add, SUBSYSTEM=net, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0, DEVNAME=, IFINDEX=7
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.348 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.348 [I] hotplug.c:145: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0 is a device (subsystem)
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.348 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.348 [I] device.c:4905: add_dev: subsys=net sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0 dev= parent_dev=0x0819ae10
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.349 [I] device.c:4753: Add callouts completed udi=/org/freedesktop/Hal/devices/net_00_23_69_d8_10_50
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.349 [D] device_store.c:516: adding 0x817da80 to (linux.sysfs_path,/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/net/wlan0)
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.349 [I] hald.c:108: Added device to GDL; udi=/org/freedesktop/Hal/devices/net_00_23_69_d8_10_50
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.350 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:38 foxtop hald[4834]: 16:30:38.350 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
Apr 22 16:30:39 foxtop kernel: rt2800usb 1-1.4.3:1.0: firmware: requesting rt2870.bin
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [I] osspec.c:251: SEQNUM=1252, ACTION=add, SUBSYSTEM=firmware, DEVPATH=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0, DEVNAME=, IFINDEX=0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [I] osspec.c:1016: hal_util_find_known_parent: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0'->'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0'
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [I] device.c:4905: add_dev: subsys=firmware sysfs_path=/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0 dev= parent_dev=0x0819ae10
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.295 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.17.
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.297 [I] osspec.c:251: SEQNUM=1253, ACTION=remove, SUBSYSTEM=firmware, DEVPATH=/sys/devices/pci000
0:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0, DEVNAME=, IFINDEX=0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.297 [I] hotplug.c:435: checking event /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4.3
/1-1.4.3:1.0/firmware/1-1.4.3:1.0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.298 [I] device.c:4986: remove_dev: subsys=firmware sysfs_path=/sys/devices/pci0000:00/0000:00:1d.
7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/firmware/1-1.4.3:1.0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.298 [W] device.c:4990: Error removing device
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.298 [D] hotplug.c:453: events queued = 0, events in progress = 0
Apr 22 16:30:39 foxtop hald[4834]: 16:30:39.298 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
Apr 22 16:30:39 foxtop kernel: phy3 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
Apr 22 16:30:39 foxtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1
Apr 22 16:30:40 foxtop kernel: ehci_hcd 0000:00:1d.7: detected XactErr len 0/0 retry 1


Last edited by imbiea on Sun May 02, 2010 9:32 pm; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7636
Location: Goose Creek SC

PostPosted: Thu Apr 22, 2010 11:51 pm    Post subject: Reply with quote

Running a couple of rt2870 and 4 rt2860 using the staging drivers without hacks and without problems. The 2.6.33-r1 did change the name from ra) to wlan0.
No luck at all with the rt2x00 drivers. In fact, when the rt2x00 driver for 2870 was put in the kernel I lost the ability to use the direct from ralink drivers as well as finding the rt2x00 useless and was driven to the staging drivers.
Back to top
View user's profile Send private message
imbiea
Tux's lil' helper
Tux's lil' helper


Joined: 23 Nov 2004
Posts: 91
Location: Colorado Rockies

PostPosted: Fri Apr 23, 2010 3:32 pm    Post subject: Reply with quote

My problem this far is that my device (1737:0077) isn't in the staging sources for either 2870 or 3070 (unless I PUT it in. :-D (yes, I modified the code to include the device) And when I do (on any kernel other than 2.6.31-r3 ) it doesn't work (something odd in other staging source) So I'm stuck running 2.6.31-r3 unless I can figure my out why the hack doesn't work on other staging sources, or I have to try and get the rt2x00 drivers working. Something 'different/odd/ok... shitty) about this Linksys card.. :-( It does show up (1737:0077) in the rt2x00 drivers... but alas... does not work... :evil:
Back to top
View user's profile Send private message
Rexilion
Veteran
Veteran


Joined: 17 Mar 2009
Posts: 1044

PostPosted: Thu Apr 29, 2010 9:43 am    Post subject: Reply with quote

The rt2x00 drivers are under heavy development. I have seen a lot of commits fly by especially for rt2800usb (rt2x00). Perhaps you can try a git source of the wireless devlopment branche? Is that possible for you?
Back to top
View user's profile Send private message
oRDeX
Veteran
Veteran


Joined: 19 Oct 2003
Posts: 1309

PostPosted: Thu Apr 29, 2010 5:53 pm    Post subject: Reply with quote

As said, rt2x00 is under heavy development...You could try to download the last compat-wireless snapshot and compile it on your kernel.
I'm testing the rt2800pci for them and I can say that they are working hard, but problems aren't missing..
Maybe you could try, as suggested, the staging driver from your kernel.

Anyway, remember that the rt2x00 modules in the mainline kernel are not so uptodate.
Back to top
View user's profile Send private message
imbiea
Tux's lil' helper
Tux's lil' helper


Joined: 23 Nov 2004
Posts: 91
Location: Colorado Rockies

PostPosted: Fri Apr 30, 2010 2:07 pm    Post subject: Reply with quote

I have tried the git sources several time with no luck. However... yesterday I tried the staging drivers again for the rt drivers.. and it does have the device in the rt2870.h files... and ... it works!!
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7636
Location: Goose Creek SC

PostPosted: Fri Apr 30, 2010 2:14 pm    Post subject: Reply with quote

hooray for you!!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum