| View previous topic :: View next topic |
| Author |
Message |
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
 Posted: Fri Dec 11, 2009 6:43 am Post subject: [SOLVED] ati-drivers & xorg-server 1.7.3 |
 |
|
I'm guessing there is no work around for the block seen here:
| Code: |
Calculating dependencies... done!
[ebuild N ] x11-drivers/ati-drivers-9.11 USE="modules (multilib) -debug"
[blocks B ] >=x11-base/xorg-server-1.7.0 (">=x11-base/xorg-server-1.7.0" is blocking x11-drivers/ati-drivers-9.11)
[~] sudo emerge --ask ati-drivers
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] x11-drivers/ati-drivers-9.11 USE="modules (multilib) -debug"
[blocks B ] >=x11-base/xorg-server-1.7.0 (">=x11-base/xorg-server-1.7.0" is blocking x11-drivers/ati-drivers-9.11)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('ebuild', '/', 'x11-drivers/ati-drivers-9.11', 'merge') pulled in by
ati-drivers
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked
|
so I was wondering what driver I should use for a ati 5850. From what I've read radeonhd isn't ready.
Last edited by reasons on Tue Dec 15, 2009 9:50 am; edited 1 time in total |
|
| Back to top |
|
 |
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5945
|
| Posted: Fri Dec 11, 2009 10:59 am Post subject: Re: ati-drivers & xorg-server 1.7.3 |
|
|
| reasons wrote: | I'm guessing there is no work around for the block seen here:
| Code: |
Calculating dependencies... done!
[ebuild N ] x11-drivers/ati-drivers-9.11 USE="modules (multilib) -debug"
[blocks B ] >=x11-base/xorg-server-1.7.0 (">=x11-base/xorg-server-1.7.0" is blocking x11-drivers/ati-drivers-9.11)
[~] sudo emerge --ask ati-drivers
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] x11-drivers/ati-drivers-9.11 USE="modules (multilib) -debug"
[blocks B ] >=x11-base/xorg-server-1.7.0 (">=x11-base/xorg-server-1.7.0" is blocking x11-drivers/ati-drivers-9.11)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('ebuild', '/', 'x11-drivers/ati-drivers-9.11', 'merge') pulled in by
ati-drivers
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked
|
so I was wondering what driver I should use for a ati 5850. From what I've read radeonhd isn't ready. |
use older xserver.
neither radeon nor radeonhd are ready in the 3d department. (actually mesa and drm are the packages that gives the 3d)
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Fri Dec 11, 2009 6:01 pm Post subject: |
|
|
| I don't need 3D though. I run xmonad and with mplayer being the most intensive app for the gpu. I've tried to roll back xorg-server all the way to 1.6.5 to but compile always fails. |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5945
|
| Posted: Fri Dec 11, 2009 6:06 pm Post subject: |
|
|
| reasons wrote: | | I don't need 3D though. I run xmonad and with mplayer being the most intensive app for the gpu. I've tried to roll back xorg-server all the way to 1.6.5 to but compile always fails. |
afaik, ati5xxx work with earlier versions (2d) with that unsupported hardware watermark, you've might wanna stay with the current working version.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Fri Dec 11, 2009 6:14 pm Post subject: |
|
|
| Hi, you should upgrade to the latest stable version of Xorg-Server and pick the ati-drivers version that work with the specific version of Xorg. |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Fri Dec 11, 2009 6:18 pm Post subject: |
|
|
| DaggyStyle wrote: | | reasons wrote: | | I don't need 3D though. I run xmonad and with mplayer being the most intensive app for the gpu. I've tried to roll back xorg-server all the way to 1.6.5 to but compile always fails. |
afaik, ati5xxx work with earlier versions (2d) with that unsupported hardware watermark, you've might wanna stay with the current working version. |
When I emerge xf86-video-radeonhd and then use the driver "radeonhd" in my xorg.conf no screens are found
| d2_racing wrote: | | Hi, you should upgrade to the latest stable version of Xorg-Server and pick the ati-drivers version that work with the specific version of Xorg. |
The problem with that is I've gone down to 1.5.3-r6, none will compile. |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Fri Dec 11, 2009 6:19 pm Post subject: |
|
|
| What's the actual build fail message ? |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Fri Dec 11, 2009 6:24 pm Post subject: |
|
|
| Code: |
Portage 2.1.7.13 (default/linux/amd64/10.0, gcc-4.4.2, glibc-2.11-r1, 2.6.32-gentoo x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-2.6.32-gentoo-x86_64-Intel-R-_Core-TM-_i5_CPU_750_@_2.67GHz-with-gentoo-2.0.1
Timestamp of tree: Fri, 11 Dec 2009 18:00:01 +0000
app-shells/bash: 4.0_p35
dev-lang/python: 2.6.4, 3.1.1-r1
sys-apps/baselayout: 2.0.1
sys-apps/openrc: 0.5.2-r2
sys-apps/sandbox: 2.2
sys-devel/autoconf: 2.13, 2.64
sys-devel/automake: 1.10.2, 1.11.1
sys-devel/binutils: 2.20
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=core2 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="en en_US"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/overlay"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl acpi ada alsa amd64 bash-completion berkdb bzip2 cairo cdparanoia cli clock cracklib crypt cups curl cxx dbus dri ffmpeg fftw firefox flac fontconfig fortran gdbm gimp gpm gstreamer gtk hal iconv jpeg mmx modules mp3 mpd mplayer mudflap multilib ncurses nls nptl nptlonly ogg openmp pam pcre perl png pppd python readline reflection session sound spl sse sse2 ssl svg symlink sysfs tcpd truetype unicode visualizer vorbis x264 xft xinerama xorg xterm zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en en_US" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeonhd"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
| Code: |
* CPV: x11-base/xorg-server-1.6.5-r1
* REPO: gentoo
* USE: amd64 elibc_glibc hal kernel_linux multilib nptl userland_GNU xorg
Switching to xorg-x11 OpenGL interface... done
>>> Unpacking source...
>>> Unpacking xorg-server-1.6.5.tar.bz2 to /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work
>>> Unpacking xorg-server-1.6.5-gentoo-patches-01.tar.bz2 to /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work
>>> Source unpacked in /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work
>>> Preparing source in /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5 ...
* Applying various patches (bugfixes/updates) ...
* 0001-xace-Fake-return-values-on-denials-in-input-polling-.patch ... [ ok ]
* 0002-xselinux-Stop-special-casing-QueryPointer-access-che.patch ... [ ok ]
* 0003-xace-Relax-permissions-on-XkbGetState-from-Read-to-G.patch ... [ ok ]
* 0004-xselinux-switch-from-x_device-to-separate-x_pointer-.patch ... [ ok ]
* 0005-xselinux-Note-something-in-the-log-if-disabled-by-bo.patch ... [ ok ]
* 0006-xselinux-Allow-SetWindowCreateContext-to-be-used-for.patch ... [ ok ]
* 0007-xselinux-Use-a-more-informative-message-when-disable.patch ... [ ok ]
* 0008-Fix-breakage-on-alpha-caused-by-c7680befe5ae.patch ... [ ok ]
* Done with patching
* Running elibtoolize in: xorg-server-1.6.5
* Applying portage-2.2.patch ...
* Applying sed-1.5.6.patch ...
* Applying as-needed-2.2.6.patch ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5 ...
* econf: updating xorg-server-1.6.5/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating xorg-server-1.6.5/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --prefix=/usr --datadir=/usr/share --disable-ipv6 --disable-dmx --disable-kdrive --disable-tslib --disable-xcalibrate --enable-xvfb --enable-xnest --enable-record --enable-xfree86-utils --enable-install-libxf86config --enable-dri --enable-dri2 --enable-glx --enable-xorg --enable-glx-tls --enable-config-hal --sysconfdir=/etc/X11 --localstatedir=/var --enable-install-setuid --with-fontdir=/usr/share/fonts --with-xkb-output=/var/lib/xkb --without-dtrace --disable-xsdl
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of x86_64-pc-linux-gnu-gcc... gcc3
checking dependency style of x86_64-pc-linux-gnu-gcc... gcc3
checking whether ln -s works... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for bash... /bin/bash
checking if dolt supports this host... yes, replacing libtool
checking whether make sets $(MAKE)... (cached) yes
checking for x86_64-pc-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for bison... bison -y
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for cpp... /usr/bin/cpp
checking if /usr/bin/cpp requires -undef... yes
checking if /usr/bin/cpp requires -traditional... yes
checking for sed... (cached) /bin/sed
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking whether byte ordering is bigendian... no
checking size of unsigned long... 8
checking for pid_t... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/endian.h usability... no
checking sys/endian.h presence... no
checking for sys/endian.h... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking for vprintf... yes
checking for _doprnt... no
checking for geteuid... yes
checking for getuid... yes
checking for link... yes
checking for memmove... yes
checking for memset... yes
checking for mkstemp... yes
checking for strchr... yes
checking for strrchr... yes
checking for strtol... yes
checking for getopt... yes
checking for getopt_long... yes
checking for vsnprintf... yes
checking for walkcontext... no
checking for backtrace... yes
checking for getisax... no
checking for getzoneid... no
checking for shmctl64... no
checking for strcasestr... yes
checking for ffs... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for getdtablesize... yes
checking for getifaddrs... yes
checking for getpeereid... no
checking for getpeerucred... no
checking for strlcat... no
checking for strlcpy... no
checking for mmap... yes
checking for sqrt in -lm... yes
checking for cbrt in -lm... yes
checking ndbm.h usability... no
checking ndbm.h presence... no
checking for ndbm.h... no
checking dbm.h usability... no
checking dbm.h presence... no
checking for dbm.h... no
checking rpcsvc/dbm.h usability... no
checking rpcsvc/dbm.h presence... no
checking for rpcsvc/dbm.h... no
checking linux/agpgart.h usability... yes
checking linux/agpgart.h presence... yes
checking for linux/agpgart.h... yes
checking sys/agpio.h usability... no
checking sys/agpio.h presence... no
checking for sys/agpio.h... no
checking linux/apm_bios.h usability... yes
checking linux/apm_bios.h presence... yes
checking for linux/apm_bios.h... yes
checking linux/fb.h usability... yes
checking linux/fb.h presence... yes
checking for linux/fb.h... yes
checking asm/mtrr.h usability... yes
checking asm/mtrr.h presence... yes
checking for asm/mtrr.h... yes
checking sys/memrange.h usability... no
checking sys/memrange.h presence... no
checking for sys/memrange.h... no
checking machine/mtrr.h usability... no
checking machine/mtrr.h presence... no
checking for machine/mtrr.h... no
checking for sys/linker.h... no
checking for SYSV IPC... yes
checking machine/apmvar.h usability... no
checking machine/apmvar.h presence... no
checking for machine/apmvar.h... no
checking execinfo.h usability... yes
checking execinfo.h presence... yes
checking for execinfo.h... yes
checking for backtrace in -lc... yes
checking to see if we can install the Xorg server as root... yes
checking if Xtrans should support UNIX socket connections... yes
checking if Xtrans should support TCP socket connections... yes
checking for library containing socket... none required
checking for library containing gethostbyname... none required
checking for main in -lws2_32... no
checking if IPv6 support should be built... no
./configure: line 15287: ac_fn_c_check_member: command not found
checking for socklen_t... yes
checking if Xtrans should support os-specific local connections... no
checking for authdes_seccreate... no
checking for authdes_create... yes
checking for library containing getsecretkey... none required
checking if Secure RPC authentication ("SUN-DES-1") should be supported... yes
checking for /usr/share/sgml/X11/defs.ent... no
checking for linuxdoc... no
checking for ps2pdf... /usr/bin/ps2pdf
checking Whether to build documentation... no
checking Whether to build pdf documentation... yes
checking for DBUS... yes
checking for HAL... yes
checking for glibc...... yes
checking for clock_gettime... no
checking for clock_gettime in -lrt... yes
checking for a useful monotonic clock ...... yes
checking for XLIB... yes
checking for GL... yes
checking for DRIPROTO... yes
checking for GL... yes
checking for DRI2PROTO... yes
checking for LIBDRM... yes
checking for strcasecmp... yes
checking for strncasecmp... yes
checking for strcasestr... (cached) yes
checking for XDMCP... yes
checking for XdmcpWrap in -lXdmcp... yes
checking for SHA1Init in -lmd... no
checking for XSERVERCFLAGS... yes
checking for XSERVERLIBS... yes
checking if SVR4 needs to be defined... no
checking whether to build Xvfb DDX... yes
checking for XNESTMODULES... yes
checking whether to build Xnest DDX... yes
checking whether to build Xorg DDX... yes
checking for PCIACCESS... yes
checking for pci_system_init_dev_mem... yes
checking for pci_device_enable... yes
checking for DGA... yes
checking for DGA... yes
checking for XF86VIDMODE... yes
checking for XF86VIDMODE... yes
checking for XORG_MODULES... yes
checking for perl... /usr/bin/perl
checking whether to build XWin DDX... no
checking dependency style of $(CC)... none
checking for DMXMODULES... no
checking whether to build Xdmx DDX... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating glx/Makefile
config.status: creating include/Makefile
config.status: creating composite/Makefile
config.status: creating damageext/Makefile
config.status: creating dbe/Makefile
config.status: creating dix/Makefile
config.status: creating doc/Makefile
config.status: creating fb/Makefile
config.status: creating record/Makefile
config.status: creating config/Makefile
config.status: creating mi/Makefile
config.status: creating miext/Makefile
config.status: creating miext/damage/Makefile
config.status: creating miext/shadow/Makefile
config.status: creating miext/cw/Makefile
config.status: creating miext/rootless/Makefile
config.status: creating os/Makefile
config.status: creating randr/Makefile
config.status: creating render/Makefile
config.status: creating xkb/Makefile
config.status: creating Xext/Makefile
config.status: creating Xi/Makefile
config.status: creating xfixes/Makefile
config.status: creating exa/Makefile
config.status: creating hw/Makefile
config.status: creating hw/xfree86/Makefile
config.status: creating hw/xfree86/common/Makefile
config.status: creating hw/xfree86/common/xf86Build.h
config.status: creating hw/xfree86/ddc/Makefile
config.status: creating hw/xfree86/dixmods/Makefile
config.status: creating hw/xfree86/dixmods/extmod/Makefile
config.status: creating hw/xfree86/doc/Makefile
config.status: creating hw/xfree86/doc/devel/Makefile
config.status: creating hw/xfree86/doc/man/Makefile
config.status: creating hw/xfree86/doc/sgml/Makefile
config.status: creating hw/xfree86/dri/Makefile
config.status: creating hw/xfree86/dri2/Makefile
config.status: creating hw/xfree86/dummylib/Makefile
config.status: creating hw/xfree86/exa/Makefile
config.status: creating hw/xfree86/fbdevhw/Makefile
config.status: creating hw/xfree86/i2c/Makefile
config.status: creating hw/xfree86/int10/Makefile
config.status: creating hw/xfree86/loader/Makefile
config.status: creating hw/xfree86/modes/Makefile
config.status: creating hw/xfree86/os-support/Makefile
config.status: creating hw/xfree86/os-support/bsd/Makefile
config.status: creating hw/xfree86/os-support/bus/Makefile
config.status: creating hw/xfree86/os-support/hurd/Makefile
config.status: creating hw/xfree86/os-support/misc/Makefile
config.status: creating hw/xfree86/os-support/linux/Makefile
config.status: creating hw/xfree86/os-support/sco/Makefile
config.status: creating hw/xfree86/os-support/solaris/Makefile
config.status: creating hw/xfree86/os-support/sysv/Makefile
config.status: creating hw/xfree86/parser/Makefile
config.status: creating hw/xfree86/ramdac/Makefile
config.status: creating hw/xfree86/shadowfb/Makefile
config.status: creating hw/xfree86/vbe/Makefile
config.status: creating hw/xfree86/vgahw/Makefile
config.status: creating hw/xfree86/x86emu/Makefile
config.status: creating hw/xfree86/xaa/Makefile
config.status: creating hw/xfree86/xf8_16bpp/Makefile
config.status: creating hw/xfree86/utils/Makefile
config.status: creating hw/xfree86/utils/cvt/Makefile
config.status: creating hw/xfree86/utils/gtf/Makefile
config.status: creating hw/dmx/config/Makefile
config.status: creating hw/dmx/doc/Makefile
config.status: creating hw/dmx/examples/Makefile
config.status: creating hw/dmx/input/Makefile
config.status: creating hw/dmx/glxProxy/Makefile
config.status: creating hw/dmx/Makefile
config.status: creating hw/vfb/Makefile
config.status: creating hw/xnest/Makefile
config.status: creating hw/xwin/Makefile
config.status: creating hw/xquartz/Makefile
config.status: creating hw/xquartz/GL/Makefile
config.status: creating hw/xquartz/bundle/Makefile
config.status: creating hw/xquartz/doc/Makefile
config.status: creating hw/xquartz/mach-startup/Makefile
config.status: creating hw/xquartz/pbproxy/Makefile
config.status: creating hw/xquartz/xpr/Makefile
config.status: creating hw/kdrive/Makefile
config.status: creating hw/kdrive/ephyr/Makefile
config.status: creating hw/kdrive/fake/Makefile
config.status: creating hw/kdrive/fbdev/Makefile
config.status: creating hw/kdrive/linux/Makefile
config.status: creating hw/kdrive/sdl/Makefile
config.status: creating hw/kdrive/src/Makefile
config.status: creating xorg-server.pc
config.status: creating include/do-not-use-config.h
config.status: creating include/xorg-server.h
config.status: creating include/dix-config.h
config.status: creating include/xorg-config.h
config.status: creating include/xkb-config.h
config.status: creating include/xwin-config.h
config.status: creating include/kdrive-config.h
config.status: executing depfiles commands
config.status: executing libtool commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5 ...
make -j5
Making all in doc
make[1]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/doc'
/usr/bin/cpp -undef -traditional -D__vendorversion__="\"xorg-server 1.6.5\" \"X Version 11\"" -D__xorgversion__="\"xorg-server 1.6.5\" \"X Version 11\"" -D__appmansuffix__=1 -D__filemansuffix__=5 -D__libmansuffix__=3 -D__miscmansuffix__=7 -D__drivermansuffix__=4 -D__adminmansuffix__=8 -D__mandir__=/usr/share/man -D__projectroot__=/usr -D__xconfigfile__=xorg.conf -D__xconfigdir__= -D__xlogfile__= -D__xservername__=Xorg -D__default_font_path__="`echo /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/ | sed -e 's/,/, /g'`" < Xserver.man.pre | sed -e '/^# *[0-9][0-9]* *.*$/d' -e '/^#line *[0-9][0-9]* *.*$/d' -e '/^[ ]*XCOMM$/s/XCOMM/#/' -e '/^[ ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/#/' -e '/^[ ]*XHASH/s/XHASH/#/' -e '/\@\@$/s/\@\@$/\\/' > Xserver.man
make all-am
make[2]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/doc'
cp Xserver.man Xserver.1
make[2]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/doc'
make[1]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/doc'
Making all in include
make[1]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/include'
make all-am
make[2]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/include'
make[2]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/include'
make[1]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/include'
Making all in dix
make[1]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/dix'
make all-am
make[2]: Entering directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/dix'
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT atom.lo -MD -MP -MF .deps/atom.Tpo -c -o atom.lo atom.c
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT colormap.lo -MD -MP -MF .deps/colormap.Tpo -c -o colormap.lo colormap.c
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT cursor.lo -MD -MP -MF .deps/cursor.Tpo -c -o cursor.lo cursor.c
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT deprecated.lo -MD -MP -MF .deps/deprecated.Tpo -c -o deprecated.lo deprecated.c
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT devices.lo -MD -MP -MF .deps/devices.Tpo -c -o devices.lo devices.c
cursor.c: In function ‘CreateRootCursor’:
cursor.c:548: warning: ‘LookupIDByType’ is deprecated (declared at ../include/resource.h:282)
devices.c: In function ‘InitStringFeedbackClassDeviceStruct’:
devices.c:1468: warning: cast from pointer to integer of different size
colormap.c: In function ‘AllocColor’:
colormap.c:898: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
colormap.c:915: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
colormap.c: In function ‘FreeClientPixels’:
colormap.c:1557: warning: ‘LookupIDByType’ is deprecated (declared at ../include/resource.h:282)
deprecated.c: In function ‘LookupIDByType’:
deprecated.c:152: warning: ‘SecurityLookupIDByType’ is deprecated (declared at deprecated.c:120)
deprecated.c: In function ‘LookupIDByClass’:
deprecated.c:159: warning: ‘SecurityLookupIDByClass’ is deprecated (declared at deprecated.c:135)
mv -f .deps/deprecated.Tpo .deps/deprecated.Plo
mv -f .deps/atom.Tpo .deps/atom.Plo
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT dispatch.lo -MD -MP -MF .deps/dispatch.Tpo -c -o dispatch.lo dispatch.c
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT dixfonts.lo -MD -MP -MF .deps/dixfonts.Tpo -c -o dixfonts.lo dixfonts.c
mv -f .deps/cursor.Tpo .deps/cursor.Plo
../doltcompile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -DDBUS_API_SUBJECT_TO_CHANGE -D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I../include -I../include -I../Xext -I../composite -I../damageext -I../xfixes -I../Xi -I../mi -I../miext/shadow -I../miext/damage -I../render -I../randr -I../fb -DVENDOR_NAME=\""The X.Org Foundation"\" -DVENDOR_RELEASE="(((1) * 10000000) + ((6) * 100000) + ((5) * 1000) + 0)" -march=core2 -O2 -pipe -MT dixutils.lo -MD -MP -MF .deps/dixutils.Tpo -c -o dixutils.lo dixutils.c
In file included from ../Xext/panoramiX.h:44,
from dispatch.c:134:
/usr/include/X11/extensions/panoramiXext.h:49: error: expected ‘)’ before ‘*’ token
/usr/include/X11/extensions/panoramiXext.h:54: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXQueryVersion’
/usr/include/X11/extensions/panoramiXext.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetState’
/usr/include/X11/extensions/panoramiXext.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetScreenCount’
/usr/include/X11/extensions/panoramiXext.h:76: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetScreenSize’
In file included from ../Xext/panoramiX.h:44,
from dixfonts.c:75:
/usr/include/X11/extensions/panoramiXext.h:49: error: expected ‘)’ before ‘*’ token
/usr/include/X11/extensions/panoramiXext.h:54: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXQueryVersion’
/usr/include/X11/extensions/panoramiXext.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetState’
/usr/include/X11/extensions/panoramiXext.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetScreenCount’
/usr/include/X11/extensions/panoramiXext.h:76: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘XPanoramiXGetScreenSize’
dixfonts.c: In function ‘SetDefaultFont’:
dixfonts.c:145: warning: ‘LookupIDByType’ is deprecated (declared at ../include/resource.h:282)
dixfonts.c: In function ‘doPolyText’:
dixfonts.c:1212: warning: ‘SecurityLookupIDByClass’ is deprecated (declared at ../include/resource.h:275)
dixfonts.c:1242: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
dixfonts.c: In function ‘doImageText’:
dixfonts.c:1497: warning: ‘SecurityLookupIDByClass’ is deprecated (declared at ../include/resource.h:275)
dixfonts.c: In function ‘find_old_font’:
dixfonts.c:2046: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
make[2]: *** [dixfonts.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
dispatch.c: In function ‘ProcCloseFont’:
dispatch.c:1117: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
make[2]: *** [dispatch.lo] Error 1
dixutils.c: In function ‘dixLookupGC’:
dixutils.c:243: warning: ‘SecurityLookupIDByType’ is deprecated (declared at ../include/resource.h:268)
mv -f .deps/dixutils.Tpo .deps/dixutils.Plo
mv -f .deps/devices.Tpo .deps/devices.Plo
mv -f .deps/colormap.Tpo .deps/colormap.Plo
make[2]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/dix'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5/dix'
make: *** [all-recursive] Error 1
* ERROR: x11-base/xorg-server-1.6.5-r1 failed:
* emake failed
*
* Call stack:
* ebuild.sh, line 61: Called src_compile
* environment, line 3742: Called x-modular_src_compile
* environment, line 4704: Called x-modular_src_make
* environment, line 4742: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of 'emerge --info =x11-base/xorg-server-1.6.5-r1',
* the complete build log and the output of 'emerge -pqv =x11-base/xorg-server-1.6.5-r1'.
* The complete build log is located at '/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/temp/environment'.
* S: '/var/tmp/portage/x11-base/xorg-server-1.6.5-r1/work/xorg-server-1.6.5'
|
| Code: |
Portage 2.1.7.13 (default/linux/amd64/10.0, gcc-4.4.2, glibc-2.11-r1, 2.6.32-gentoo x86_64)
=================================================================
System uname: Linux-2.6.32-gentoo-x86_64-Intel-R-_Core-TM-_i5_CPU_750_@_2.67GHz-with-gentoo-2.0.1
Timestamp of tree: Fri, 11 Dec 2009 18:00:01 +0000
app-shells/bash: 4.0_p35
dev-lang/python: 2.6.4, 3.1.1-r1
sys-apps/baselayout: 2.0.1
sys-apps/openrc: 0.5.2-r2
sys-apps/sandbox: 2.2
sys-devel/autoconf: 2.13, 2.64
sys-devel/automake: 1.10.2, 1.11.1
sys-devel/binutils: 2.20
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=core2 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="en en_US"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/overlay"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl acpi ada alsa amd64 bash-completion berkdb bzip2 cairo cdparanoia cli clock cracklib crypt cups curl cxx dbus dri ffmpeg fftw firefox flac fontconfig fortran gdbm gimp gpm gstreamer gtk hal iconv jpeg mmx modules mp3 mpd mplayer mudflap multilib ncurses nls nptl nptlonly ogg openmp pam pcre perl png pppd python readline reflection session sound spl sse sse2 ssl svg symlink sysfs tcpd truetype unicode visualizer vorbis x264 xft xinerama xorg xterm zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en en_US" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeonhd"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
|
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Sun Dec 13, 2009 1:19 am Post subject: |
|
|
your version of xineramaproto and/or libXinerama is too new 
you might need to mask several other versions of x11-proto/... and x11-libs/... and re-compile them to get it (xorg-server) to compile
try the following in /etc/portage/package.mask:
| Quote: | #=x11-libs/libxcb-1.1.93*
#=x11-proto/randrproto-1.2.99*
=x11-libs/libdrm-9999
=x11-libs/libXrandr-1.2.99*
=x11-proto/fixesproto-4.1*
=x11-libs/libXext-1.1*
=x11-proto/xextproto-7.1*
=x11-libs/libXfixes-4.0.4*
=x11-libs/libXi-1.3*
#=x11-libs/xtrans-1.2.5*
=x11-libs/libXtst-1.0.99*
=x11-libs/libXtst-1.1*
=x11-libs/libXxf86vm-1.1*
=x11-libs/libXxf86vm-1.1*
=x11-proto/inputproto-2.0*
=x11-proto/recordproto-1.14*
=x11-proto/xf86vidmodeproto-2.3*
=x11-base/xorg-server-1.7*
=x11-libs/libXxf86vm-1.1*
=x11-proto/xineramaproto-1.2*
=x11-libs/libXinerama-1.1*
=x11-libs/libdmx-1.1*
=x11-apps/xinput-1.5*
=x11-proto/dmxproto-2.3*
#=x11-proto/xf86dgaproto-2.1*
#=x11-libs/libXxf86dga-1.1* |
I hope you've already upgraded to newer libxcb 
latest stable version of xorg-server working for me is:
1.6.5
get a patched version from energyman's overlay which will make compositing faster ...
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004  |
|
| Back to top |
|
|
kiboko
n00b
Joined: 29 May 2003
Posts: 59
|
| Posted: Mon Dec 14, 2009 7:32 pm Post subject: beginning to get frustrated |
|
|
I had to downgrade to x11-base/xorg-server-1.6.5-r1 to keep x11-drivers/ati-drivers-9.11 working as it blocks >=x11-base/xorg-server-7.0.
Now x11-drivers/ati-drivers-9.11 does not compile on sys-kernel/gentoo-sources-2.6.32. So now I cannot even upgrade my kernel to the latest.
Also I have just found that the new media-libs/mesa-7.7_rc2 requires >=x11-proto/xextproto-7.0.99.1.
Things are beginning to spiral out of control on my ~ ATI platforms.
Any new suggestions on how to get x11-drivers/xorg-server working again with the latest kernels on ATI based workstations? |
|
| Back to top |
|
|
i92guboj
Bodhisattva
Joined: 30 Nov 2004
Posts: 10315
Location: Córdoba (Spain)
|
| Posted: Mon Dec 14, 2009 8:08 pm Post subject: |
|
|
With latest kernels there are not many options, only radeon really. fglrx has always been that way. They always lack a couple of kernel versions behind, and some X releases as well.
I have managed to get DRI working and 3d support with the radeon driver, but it won't be painless. If you want to try, you will probably need the 9999 ebuilds for xf86-video-ati, libdrm and mesa, from the x11 overlay. Note that I don't need 3d either, but the big problem without DRI is that everything takes quite a bit of cpu, and that XVideo doesn't work, which in turn means that even watching to a movie in mplayer will be nearly impossible if DRI is not on.
I got it working, somehow, though it's far from perfect. Even neverwinter nights runs, kind of, though X leaks ram like mad and I have to shut it down in a minute or so becase the swapping completely kills my machine. I admit they are getting close though, good work. KMS is also working nicely I might add. One of the very big pains with fglrx is that I was always scared to exit X. No matter what version there was always a big chance that it would lock my box, requiring a reboot. KMS got rid of that completely.
Also note that this is on an r6xx (2600) GPU. I have no idea how well supported your -newer- GPU will work with radeon. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Mon Dec 14, 2009 8:22 pm Post subject: Re: beginning to get frustrated |
|
|
| kiboko wrote: | I had to downgrade to x11-base/xorg-server-1.6.5-r1 to keep x11-drivers/ati-drivers-9.11 working as it blocks >=x11-base/xorg-server-7.0.
Now x11-drivers/ati-drivers-9.11 does not compile on sys-kernel/gentoo-sources-2.6.32. So now I cannot even upgrade my kernel to the latest.
Also I have just found that the new media-libs/mesa-7.7_rc2 requires >=x11-proto/xextproto-7.0.99.1.
Things are beginning to spiral out of control on my ~ ATI platforms.
Any new suggestions on how to get x11-drivers/xorg-server working again with the latest kernels on ATI based workstations? |
sure
| Code: | | cd /usr/local/portage/x11-drivers/ati-drivers && ebuild ati-drivers-9.11.ebuild unpack |
| Code: | | cd /var/tmp/portage/x11-drivers/ati-drivers/work && grep -q signal.h common/lib/modules/fglrx/build_mod/kcl_io.c || perl -pi -e 's|(#include <linux/poll.h>\n)|\1#include <linux/signal.h>\n|' common/lib/modules/fglrx/build_mod/kcl_io.c && cd /usr/local/portage/x11-drivers/ati-drivers |
| Code: | | ebuild ati-drivers-9.11.ebuild compile && ebuild ati-drivers-9.11.ebuild install && ebuild ati-drivers-9.11.ebuild qmerge && ebuild ati-drivers-9.11.ebuild clean |
then manually load the module
that should get you up and running again
eventually you'll need to
| Code: | | eselect opengl set ati |
kudos to kano for this "fix" for 2.6.32 
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004 |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Mon Dec 14, 2009 8:46 pm Post subject: |
|
|
Was able to roll back with a lot of work, but now X doesn't start and Xorg -configure gives me this error. Do the latest ati drivers require kernel32 because I have 31-r6 ATM.
| Code: |
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 x86_64
Current Operating System: Linux epsilon 2.6.31-gentoo-r6 #1 SMP Mon Dec 14 03:48:07 PST 2009 x86_64
Build Date: 14 December 2009 12:33:27PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 14 12:42:05 2009
(II) Loader magic: 0xd20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:6899:1043:0330 ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xbfbe0000/131072, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
List of video drivers:
ati
radeon
fglrx
vesa
(II) LoadModule: "ati"
(II) Loading /usr/lib64/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.67.4
Module class: X.Org Video Driver
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) PCS database file /etc/ati/amdpcsdb not found
(II) Creating PCS database from initial defaults instead
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(**) ChipID override: 0x6899
(**) Chipset Supported AMD Graphics Processor (0x6899) found
Backtrace:
0: Xorg(xorg_backtrace+0x26) [0x4eb3d6]
1: Xorg(xf86SigHandler+0x39) [0x4938c9]
2: /lib/libc.so.6 [0x7f13cf8c3f50]
3: /usr/lib64/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x97d) [0x7f13ce628e3d]
4: Xorg(xf86CallDriverProbe+0xe4) [0x469d54]
5: Xorg(DoConfigure+0x1a4) [0x47c184]
6: Xorg(InitOutput+0x998) [0x46b7d8]
7: Xorg(main+0x200) [0x4311f0]
8: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f13cf8b05c6]
9: Xorg [0x430839]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
|
|
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Tue Dec 15, 2009 7:46 am Post subject: |
|
|
Solved that and I'm sitting fine with the vesa driver. When I use fglrx, X starts but freezes with a black screen and everything is non-responsive forcing me to restart. I tried aticonfig --acpi-services=off before starting X and that did nothing and glxinfo | grep direct gives me direct rendering: Yes though I don't think that counts.
Based on this post I assumed 9.9 drivers would work, so I went to them and I get this.
http://www.phoronix.com/forums/showpost.php?p=94752&postcount=42
| Code: |
sudo modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.31-gentoo-r6/video/fglrx.ko): Operation not permitted
|
EDIT - Thank God for the gentoo archives. Had to disabled direct rendering in the kernel and we're good. After two days of vesa, 1680x1050 never looked so good. |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Tue Dec 15, 2009 12:50 pm Post subject: |
|
|
Nice  |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Fri Apr 16, 2010 3:28 pm Post subject: |
|
|
I swear ATI just hates me. Did an update yesterday, just changed use to allow ipv6. Long story short, I now have the same problem. New log, same error:
| Code: |
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-gentoo-r1 x86_64
Current Operating System: Linux epsilon 2.6.33-gentoo-r1 #3 SMP Fri Apr 16 08:13:22 PDT 2010 x86_64
Build Date: 16 April 2010 07:51:14AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 16 08:20:13 2010
(II) Loader magic: 0xf60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 2
(--) PCI:*(0:1:0:0) 1002:6899:1043:0330 ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xbfbe0000/131072, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
List of video drivers:
fglrx
vesa
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.70.3
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.70.3
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(**) ChipID override: 0x6899
(**) Chipset Supported AMD Graphics Processor (0x6899) found
Backtrace:
0: Xorg(xorg_backtrace+0x26) [0x4e9286]
1: Xorg(xf86SigHandler+0x39) [0x4913f9]
2: /lib/libc.so.6 [0x7f936d4e13a0]
3: /usr/lib64/xorg/modules/drivers//fglrx_drv.so(atiddxProbe+0x998) [0x7f936c8cfef8]
4: Xorg(xf86CallDriverProbe+0xe4) [0x4678c4]
5: Xorg(DoConfigure+0x1a4) [0x479cb4]
6: Xorg(InitOutput+0x998) [0x469348]
7: Xorg(main+0x200) [0x430500]
8: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f936d4cda26]
9: Xorg [0x42fb49]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
|
|
|
| Back to top |
|
|
whig
l33t
Joined: 27 Nov 2004
Posts: 973
Location: New Zealand
|
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Fri Apr 16, 2010 9:45 pm Post subject: |
|
|
| That's radeonhd, what about x11-video-ati ? |
|
| Back to top |
|
|
whig
l33t
Joined: 27 Nov 2004
Posts: 973
Location: New Zealand
|
| Posted: Sat Apr 17, 2010 8:24 am Post subject: |
|
|
| Unsure myself, but the poster a bit back had limited success. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
