Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Thinkpad W500 and xorg troubles
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 11, 2009 12:25 am    Post subject: Thinkpad W500 and xorg troubles Reply with quote

Whenever I start xorg my computer experiences massive slowdown. I am fairly certain the slowdown is related to my graphics card. The slowdown continues when xorg has been shutdown and makes the computer essentially unusable unless I ssh in. When I do ssh in I experience no slowdown which indicates to me that its a problem with the GPU. Despite what the lspci -vv says the GPU is an AMD FireGL V5700. Here is the output of startx:

Code:

xauth:  creating new authority file /home/jcp/.serverauth.4439


This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 x86_64
Current Operating System: Linux jcp-lenovo 2.6.29-gentoo-r5 #1 SMP PREEMPT Thu Sep 10 18:28:02 EDT 2009 x86_64
Build Date: 10 September 2009  04:44:36PM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 10 20:10:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) module ABI major version (4) doesn't match the server's version (5)
(EE) Failed to load module "intel" (module requirement mismatch, 0)
xinit:  Resource temporarily unavailable (errno 11):  Cannot register with ConsoleKit: org.freedesktop.CkConnector.Error: Unable to open session: Failed to execute program /usr/libexec/dbus-daemon-launch-helper: Success
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)
which: no gnome-settings-daemon in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)
which: no xfce-mcs-manager in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)
which: no start_kdeinit in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2)

ERROR: xdg-autostart requires PyXDG to be installed


The rest of the information I could think of is in this pastebin: http://pastebin.com/m2c469d0f

Has anyone come accross any of this kind of problem before / have a suggestion for me?
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7694
Location: Pelotas, BR

PostPosted: Fri Sep 11, 2009 12:58 am    Post subject: Reply with quote

Moved from Kernel & Hardware to Desktop Environments.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
Mike Hunt
Watchman
Watchman


Joined: 19 Jul 2009
Posts: 5287

PostPosted: Fri Sep 11, 2009 1:37 am    Post subject: Reply with quote

Please post the output of
    eselect rc show
    emerge --info
    sed -n '/Section "Device"/,/EndSection/p' /etc/X11/xorg.conf
    cat $HOME/.xinitrc
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 11, 2009 1:54 am    Post subject: Reply with quote

Here is the information you requested:

Code:

jcp@jcp-lenovo ~ $ eselect rc show
Status of init scripts in runlevel "default"
  hald                      [started]
  local                     [started]
  net.eth0                  [started]
  netmount                  [started]
  syslog-ng                 [started]
  vixie-cron                [started]


Code:

jcp@jcp-lenovo ~ $ emerge --info
Portage 2.1.6.13 (default/linux/amd64/2008.0, gcc-4.3.2, glibc-2.9_p20081201-r2, 2.6.29-gentoo-r5 x86_64)
=================================================================
System uname: Linux-2.6.29-gentoo-r5-x86_64-Intel-R-_Core-TM-2_Duo_CPU_P9500_@_2.53GHz-with-gentoo-1.12.11.1
Timestamp of tree: Thu, 10 Sep 2009 13:00:01 +0000
app-shells/bash:     3.2_p39
dev-java/java-config: 2.1.8-r1
dev-lang/python:     2.6.2-r1
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.6-r2
sys-devel/autoconf:  2.63-r1
sys-devel/automake:  1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils:  2.18-r3
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.27-r2
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -march=athlon64 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/sandbox.d /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=athlon64 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://192.168.1.160/gentoo-portage/"
USE="X a52 aac aalib acl acpi aim alsa amd64 audiofile bash-completion bash_completion berkdb branding bzip2 cairo cdr cli cracklib crypt cups curl dbus dga dri dvd dvdr emacs encode exif ffmpeg firefox flac fortran ftp gd gdbm gif gnutls gphoto2 gpm gtk hal iconv idn ipv6 irc isdnlog jack java jpeg jpeg2k lcms libcaca mad mmx mp3 mpeg mplayer msn mudflap multilib ncurses nls nptl nptlonly ogg openal opengl openmp oss pam pcre perl png portaudio ppds pppd python quicktime readline reflection samba session slp sndfile speex spl sqlite sse sse2 ssl svg symlink sysfs tcl tcpd theora tidy tiff truetype unicode usb vorbis wifi wmf wxwindows x264 xcb xcomposite xft xine xml xorg xvid zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="evdev keyboard mouse synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="intel vesa radeon radeonhd fglrx"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


My full xorg.conf is in the pastebin I included, but for kicks heres the output of the command:
Code:

jcp@jcp-lenovo ~ $ sed -n '/Section "Device"/,/EndSection/p' /etc/X11/xorg.conf
Section "Device"
  Identifier "intel"
  Driver "intel"
  BusID "PCI:0:2:0"
EndSection
Section "Device"
  Identifier "fglrx"
  Driver "fglrx"
  BusID "PCI:1:0:0"
EndSection
Section "Device"
  Identifier "radeon"
  Driver "radeon"
  BusID "PCI:1:0:0"
  Option "DynamicClocks" "on"
EndSection
Section "Device"
  Identifier "radeonhd"
  Driver "radeonhd"
  BusID "PCI:1:0:0"
EndSection


Code:

jcp@jcp-lenovo ~ $ cat .xinitrc
exec openbox-session
Back to top
View user's profile Send private message
yangman
n00b
n00b


Joined: 28 Aug 2004
Posts: 57

PostPosted: Fri Sep 11, 2009 4:17 am    Post subject: Reply with quote

"Switchable GPU" systems aren't supported under linux right now. Try disabling the Intel chip in your BIOS, and settle on one of the three ATI drivers instead of having all three listed.
Back to top
View user's profile Send private message
ToeiRei
Veteran
Veteran


Joined: 03 Jan 2005
Posts: 1173
Location: Austria

PostPosted: Fri Sep 11, 2009 6:17 am    Post subject: Reply with quote

As a small hint: If you don't use the ATI drivers, the card will not go to 'sleep' and just run on full power producing some heat. A fine thing: thinkwiki - a wiki about linux on thinkpads.

Rei
_________________
Please stand by - The mailer daemon is busy burning your messages in hell...
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 11, 2009 12:03 pm    Post subject: Reply with quote

Thanks yangman, but I already have the intel chip disabled in the bios. I tried removing those sections in my xorg.conf but that did not stop the massive slowdown. Thank you ToeiRei thinkwiki looks like an excellent resource I will have to check it out.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 11, 2009 12:25 pm    Post subject: Reply with quote

I tried removing the module with:

Code:

# modprobe -r fglrx


but it had no effect, typing in the console was still extremely laggy, doesn't make a whole lot of sense to me.
Back to top
View user's profile Send private message
yangman
n00b
n00b


Joined: 28 Aug 2004
Posts: 57

PostPosted: Fri Sep 11, 2009 5:58 pm    Post subject: Reply with quote

fglrx doesn't play nice with the open source drivers at all. You need to make absolutely sure that the module has not been loaded since the last boot. Just unloading it won't do.

In any case, post your complete Xorg.0.log.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 11, 2009 10:31 pm    Post subject: Reply with quote

Here you are:
http://pastebin.com/d62e1863e
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sun Sep 13, 2009 1:13 am    Post subject: Reply with quote

Ok now I have tried kernel version 2.6.27-gentoo-r8 and also the current stable version of fglrx but I get the exact same problems (in addition to the annoying bugs the current stable version has). Still not really sure what direction I should be looking in for a solution.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sun Sep 13, 2009 3:51 pm    Post subject: Reply with quote

Ok this is weird, when I run glxgears i get about 500fps (which seems a bit low) and then everything runs relatively smooth, no slow downs or anything. Maybe the card is being agressivly underclocked to save power or something? Any way of checking if this is so?

Also after running dmesg I see the following entry:
Code:

[    4.500118] Clocksource tsc unstable (delta = -447865626 ns)


Could this have anything to do with it?
Back to top
View user's profile Send private message
yangman
n00b
n00b


Joined: 28 Aug 2004
Posts: 57

PostPosted: Sun Sep 13, 2009 7:38 pm    Post subject: Reply with quote

No resource at that pastebin ID.

I can't help you with fglrx.

For the open source drivers, to get 2D acceleration, you'll need 2.6.30 kernel or newer. 3D acceleration support is still being worked on, and won't be available in a Mesa release for a while yet.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sun Sep 13, 2009 8:31 pm    Post subject: Reply with quote

Here is my Xorg.0.log:

Code:

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r8 x86_64
Current Operating System: Linux jcp-lenovo 2.6.27-gentoo-r8 #1 SMP PREEMPT Sun Sep 13 12:07:48 EDT 2009 x86_64
Build Date: 12 September 2009  08:59:33PM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 13 16:28:21 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default"
(**) |-->Screen "Discrete" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "fglrx"
(==) No monitor specified for screen "Discrete".
   Using a default monitor configuration.
(**) |-->Input Device "TouchPad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/misc/").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
   Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(==) FontPath set to:
   /usr/share/fonts/75dpi/,
   built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x3200
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 4.1
   X.Org XInput driver : 2.1
   X.Org Server Extension : 1.1
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobilitiy Radeon HD 3650 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"

(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 7.4.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(WW) fglrx: Force AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 7.4.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"

(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"

(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "fglrx"

(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.55.2
   Module class: X.Org Video Driver
(II) LoadModule: "synaptics"

(II) Loading /usr/lib64/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.1
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.55.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.552                   
(II) ATI Proprietary Linux Driver Build Date: Oct 28 2008 21:23:41
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x9591) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x9a23b0
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 0.1.0
   ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3650" (Chipset = 0x9591)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x2127)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.0.0
   ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib64/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.1.0
   ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: FGL M86
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.55.2
   ABI class: X.Org Server Extension, version 1.1
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LEN  Model: 4055  Serial#: 0
(II) fglrx(0): Year: 2007  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 167.8 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2298 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1203  v_sync_end 1206 v_blanking: 1217 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 134.3 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2208 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1202  v_sync_end 1208 v_blanking: 1220 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0):  LTN154U2-L05
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):    00ffffffffffff0030ae554000000000
(II) fglrx(0):    0011010380211578ea87f594574f8c27
(II) fglrx(0):    27505400000001010101010101010101
(II) fglrx(0):    0101010101018c41807a71b011403020
(II) fglrx(0):    33004bcf100000197434802071b01440
(II) fglrx(0):    302026004bcf100000190000000f00d1
(II) fglrx(0):    0a32d10a281101004ca35532000000fe
(II) fglrx(0):    004c544e31353455322d4c30350a0011
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 34 modes found for primary display.
(--) fglrx(0): Virtual size is 1920x1200 (pitch 0)
(**) fglrx(0): *Mode "1920x1200": 167.8 MHz (scaled from 0.0 MHz), 73.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200"x60.0  167.80  1920 1968 2000 2298  1200 1203 1206 1217 +hsync +vsync (73.0 kHz)
(**) fglrx(0):  Default mode "1920x1200": 134.3 MHz (scaled from 0.0 MHz), 60.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1920x1200"x50.0  134.28  1920 1968 2000 2208  1200 1202 1208 1220 +hsync +vsync (60.8 kHz)
(**) fglrx(0):  Default mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080"x60.0  172.79  1920 2040 2248 2576  1080 1081 1084 1118 +hsync (67.1 kHz)
(**) fglrx(0):  Default mode "1920x1080": 141.4 MHz (scaled from 0.0 MHz), 55.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1920x1080"x50.0  141.44  1920 2032 2232 2544  1080 1081 1084 1112 +hsync (55.6 kHz)
(**) fglrx(0):  Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0):  Default mode "1600x1200": 132.4 MHz (scaled from 0.0 MHz), 61.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1600x1200"x50.0  132.39  1600 1704 1872 2144  1200 1201 1204 1235 +hsync (61.7 kHz)
(**) fglrx(0):  Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0):  Default mode "1400x1050": 99.9 MHz (scaled from 0.0 MHz), 54.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1400x1050"x50.0   99.88  1400 1480 1624 1848  1050 1051 1054 1081 +hsync (54.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 89.4 MHz (scaled from 0.0 MHz), 52.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x1024"x50.0   89.37  1280 1352 1488 1696  1024 1025 1028 1054 +hsync (52.7 kHz)
(**) fglrx(0):  Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0):  Default mode "1280x768": 65.2 MHz (scaled from 0.0 MHz), 39.5 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x768"x50.0   65.17  1280 1336 1464 1648  768 769 772 791 +hsync (39.5 kHz)
(**) fglrx(0):  Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0):  Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0   60.46  1280 1328 1456 1632  720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0):  Default mode "1152x864": 66.8 MHz (scaled from 0.0 MHz), 44.4 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1152x864"x50.0   66.85  1152 1208 1328 1504  864 865 868 889 +hsync (44.4 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0):  Default mode "1024x768": 51.9 MHz (scaled from 0.0 MHz), 39.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1024x768"x50.0   51.89  1024 1064 1168 1312  768 769 772 791 +hsync (39.6 kHz)
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 31.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
(II) fglrx(0): Modeline "800x600"x50.0   31.14  800 824 904 1008  600 601 604 618 +hsync (30.9 kHz)
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "720x480": 21.8 MHz (scaled from 0.0 MHz), 24.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "720x480"x50.0   21.78  720 728 800 880  480 481 484 495 +hsync (24.8 kHz)
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "640x480": 19.4 MHz (scaled from 0.0 MHz), 24.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "640x480"x50.0   19.40  640 648 712 784  480 481 484 495 +hsync (24.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "640x400": 15.5 MHz (scaled from 0.0 MHz), 20.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "640x400"x50.0   15.49  640 632 696 752  400 401 404 412 +hsync (20.6 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "512x384": 12.0 MHz (scaled from 0.0 MHz), 19.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "512x384"x50.0   12.03  512 512 560 608  384 385 388 396 +hsync (19.8 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0   22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "400x300": 6.9 MHz (scaled from 0.0 MHz), 15.5 kHz, 50.0 Hz
(II) fglrx(0): Modeline "400x300"x50.0    6.94  400 392 424 448  300 301 304 310 +hsync (15.5 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0   12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x240": 4.2 MHz (scaled from 0.0 MHz), 12.4 kHz, 50.0 Hz
(II) fglrx(0): Modeline "320x240"x50.0    4.16  320 304 328 336  240 241 244 248 +hsync (12.4 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0   12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 3.3 MHz (scaled from 0.0 MHz), 10.3 kHz, 50.0 Hz
(II) fglrx(0): Modeline "320x200"x50.0    3.31  320 296 320 320  200 201 204 207 +hsync (10.3 kHz)
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (147, 145)
(--) fglrx(0): Virtual size is 1920x1200 (pitch 1920)
(**) fglrx(0): *Mode "1920x1200": 167.8 MHz (scaled from 0.0 MHz), 73.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200"x60.0  167.80  1920 1968 2000 2298  1200 1203 1206 1217 +hsync +vsync (73.0 kHz)
(**) fglrx(0):  Default mode "1920x1200": 134.3 MHz (scaled from 0.0 MHz), 60.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1920x1200"x50.0  134.28  1920 1968 2000 2208  1200 1202 1208 1220 +hsync +vsync (60.8 kHz)
(**) fglrx(0):  Default mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080"x60.0  172.79  1920 2040 2248 2576  1080 1081 1084 1118 +hsync (67.1 kHz)
(**) fglrx(0):  Default mode "1920x1080": 141.4 MHz (scaled from 0.0 MHz), 55.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1920x1080"x50.0  141.44  1920 2032 2232 2544  1080 1081 1084 1112 +hsync (55.6 kHz)
(**) fglrx(0):  Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0):  Default mode "1600x1200": 132.4 MHz (scaled from 0.0 MHz), 61.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1600x1200"x50.0  132.39  1600 1704 1872 2144  1200 1201 1204 1235 +hsync (61.7 kHz)
(**) fglrx(0):  Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0):  Default mode "1400x1050": 99.9 MHz (scaled from 0.0 MHz), 54.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1400x1050"x50.0   99.88  1400 1480 1624 1848  1050 1051 1054 1081 +hsync (54.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 89.4 MHz (scaled from 0.0 MHz), 52.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x1024"x50.0   89.37  1280 1352 1488 1696  1024 1025 1028 1054 +hsync (52.7 kHz)
(**) fglrx(0):  Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0):  Default mode "1280x768": 65.2 MHz (scaled from 0.0 MHz), 39.5 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x768"x50.0   65.17  1280 1336 1464 1648  768 769 772 791 +hsync (39.5 kHz)
(**) fglrx(0):  Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0):  Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0   60.46  1280 1328 1456 1632  720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0):  Default mode "1152x864": 66.8 MHz (scaled from 0.0 MHz), 44.4 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1152x864"x50.0   66.85  1152 1208 1328 1504  864 865 868 889 +hsync (44.4 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0):  Default mode "1024x768": 51.9 MHz (scaled from 0.0 MHz), 39.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1024x768"x50.0   51.89  1024 1064 1168 1312  768 769 772 791 +hsync (39.6 kHz)
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 31.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
(II) fglrx(0): Modeline "800x600"x50.0   31.14  800 824 904 1008  600 601 604 618 +hsync (30.9 kHz)
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "720x480": 21.8 MHz (scaled from 0.0 MHz), 24.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "720x480"x50.0   21.78  720 728 800 880  480 481 484 495 +hsync (24.8 kHz)
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "640x480": 19.4 MHz (scaled from 0.0 MHz), 24.7 kHz, 50.0 Hz
(II) fglrx(0): Modeline "640x480"x50.0   19.40  640 648 712 784  480 481 484 495 +hsync (24.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "640x400": 15.5 MHz (scaled from 0.0 MHz), 20.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "640x400"x50.0   15.49  640 632 696 752  400 401 404 412 +hsync (20.6 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "512x384": 12.0 MHz (scaled from 0.0 MHz), 19.8 kHz, 50.0 Hz
(II) fglrx(0): Modeline "512x384"x50.0   12.03  512 512 560 608  384 385 388 396 +hsync (19.8 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0   22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "400x300": 6.9 MHz (scaled from 0.0 MHz), 15.5 kHz, 50.0 Hz
(II) fglrx(0): Modeline "400x300"x50.0    6.94  400 392 424 448  300 301 304 310 +hsync (15.5 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0   12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x240": 4.2 MHz (scaled from 0.0 MHz), 12.4 kHz, 50.0 Hz
(II) fglrx(0): Modeline "320x240"x50.0    4.16  320 304 328 336  240 241 244 248 +hsync (12.4 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0   12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 3.3 MHz (scaled from 0.0 MHz), 10.3 kHz, 50.0 Hz
(II) fglrx(0): Modeline "320x200"x50.0    3.31  320 296 320 320  200 201 204 207 +hsync (10.3 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 1.2.1
   ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Reloading /usr/lib64/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x68000
(II) fglrx(0): [drm] mapped SAREA 0x68000 to 0x7fde3ad85000
(II) fglrx(0): [drm] framebuffer handle = 0x69000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.55.2
(II) fglrx(0):     Date: Oct 28 2008
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.27-gentoo-r8
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x0006a000
(II) fglrx(0): FIREGL Board Found
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01068000
(II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1200) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1920 x 1040
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"

(II) Loading /usr/lib64/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
   compiled for 1.4.99.906, module version = 1.0.0
   ABI class: X.Org Server Extension, version 1.1
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 90
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   Solid Horizontal and Vertical Lines
   Driver provided ScreenToScreenBitBlt replacement
   Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"

(II) Loading /usr/lib64/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
   compiled for 1.4.99.906, module version = 1.0.0
   ABI class: X.Org Server Extension, version 1.1
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) Synaptics touchpad driver version 1.0.0
(--) TouchPad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(II) TouchPad: x-axis range 1472 - 5472
(II) TouchPad: y-axis range 1408 - 4448
(II) TouchPad: pressure range 0 - 255
(II) TouchPad: finger width range 0 - 0
(II) TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(--) TouchPad touchpad found
(**) Option "SendCoreEvents"
(**) Option "CorePointer"
(**) TouchPad: always reports core events
(II) evaluating device (TouchPad)
(II) XINPUT: Adding extended input device "TouchPad" (type: TOUCHPAD)
(--) TouchPad touchpad found
(II) config/hal: Adding input device PS/2 Generic Mouse
(II) LoadModule: "evdev"

(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.5.3, module version = 2.1.3
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.1
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event7"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.0.0
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event4"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) UnloadModule: "synaptics"
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) fglrx(0): Shutdown CMMQS
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x68000 at 0x7fde3ad85000


I'll give the open source drivers a shot.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sun Sep 13, 2009 9:02 pm    Post subject: Reply with quote

Tried a kernel generated using:

Code:

# genkernel all


And everything is running smoothly now, although im only getting 300 fps with glxgears... seems it was my kernel configuration causing the slowdown.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Tue Sep 15, 2009 11:55 pm    Post subject: Reply with quote

Pappy here is the usual information, any help you can provide is appreciated:

http://pastebin.com/m4cc7c804
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.

PostPosted: Fri Sep 18, 2009 7:00 am    Post subject: Reply with quote

Ok, we're going to do this scientifically. Your machine has a mix of Intel and ATI video. For the moment, since you expressed an inclination to this in your kernel, let's concentrate on getting the intel working.

To get this done, do this:
1) remove all xf86-video drivers, fglrx drivers included.
2) edit /etc/make.conf to include VIDEO_CARDS="intel". Remove all other cards mentioned.
3) emerge libdrm && emerge mesa && emerge xorg-server && emerge xf86-video-intel && emerge $(qlist -IC x11-drivers)
4) rename or remove /etc/X11/xorg.conf.
5) startx

See what happens at that point. If the intel works, problem solved. If not, you might have to change to VIDEO_CARDS="radeon", change emerge xf86-video-intel to emerge xf86-video-ati in step 3 above, and change the DRM support from Intel to radeon in kernel. Frame buffer support can remain unchanged, as it is set to VESA VGA, and won't be an issue.

Disclaimer: Somehow, a combination of the above steps will result in getting your X working properly. I have no direct experience with this setup, and it will probably require a bit of experimentation on your end to see where you solution lies. The above scenarios are ones I would try before hurling said object out my window, or giving it to a roommate who can stand windoze.

Click here for your new .config. Compile as is.

For the best results, please do the following:

1) Move your .config file out of your kernel source directory (/usr/src/linux- ).
2) Issue the command make mrproper. This is a destructive step. It returns the source to pristine condition. Unmoved .config files will be deleted!
3) Copy my .config into your source directory.
4) Issue the command make && make modules_install.
5) Install the kernel as you normally would, and reboot.
6) Once it boots, please post /var/log/dmesg so I can see how things loaded.

Good luck, and let me know where this leads.

Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 18, 2009 5:00 pm    Post subject: Reply with quote

As you can see in the following dmesg:

http://pastebin.com/m4080bdec

There are a couple messages that concern me and that also appear to be causing delay in startup.

Code:

[    3.869002] Marking TSC unstable due to TSC halts in idle
...
[    4.500092] Clocksource tsc unstable (delta = -451820919 ns)


Are either of these messages a problem? I have found a few things I can try to get rid of them, like changing the clocksource to something else, ill fiddle with that for a while. Other than that it seems to be working fine with intel so far.

Thanks again for your help Pappy!
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Fri Sep 18, 2009 6:50 pm    Post subject: Reply with quote

Alright, sucessfully got both fglrx working on the ati card and intel working on the intel card (it has an integrated card and a discrete one) I can also switch between the two by changing options in the bios and one line in my xorg.conf. Not too shabby.

I also changed the clocksource to "clocksource=rtc" as a kernel parameter, this got rid of the unstable clock source warning in dmesg. It did not however get rid of the delay (10 seconds total to load the kernel which is slower than I'd expect but not unbearable) so unless anyone knows how to fix it or what its related too offhand then I will leave it as is.

Thanks for all your help Pappy!
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.

PostPosted: Sat Sep 19, 2009 4:42 am    Post subject: Reply with quote

I've had that error, and I could never tell whether anything was wrong. I just ignore it now. Glad you got it going.

Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.

PostPosted: Sat Sep 19, 2009 7:46 pm    Post subject: Reply with quote

Kruppe wrote:
It did not however get rid of the delay (10 seconds total to load the kernel which is slower than I'd expect but not unbearable) so unless anyone knows how to fix it or what its related too offhand then I will leave it as is.

Ok, tell me about this delay. Is it the time from when grub/lilo hands off to the kernel? Is it at some other point?

Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sat Sep 19, 2009 8:01 pm    Post subject: Reply with quote

The delay occurs right after tcp is registered. Here is a clipping of my dmesg where the delay occurs:

Code:

[    3.989546] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.991920] ctnetlink v0.93: registering with nfnetlink.
[    3.994341] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.997093] TCP cubic registered
[    3.999424] NET: Registered protocol family 17
[    4.002769] RPC: Registered udp transport module.
[    4.004259] RPC: Registered tcp transport module.
[    9.513032] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    9.748757] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    9.929655] EXT3-fs: mounted filesystem with ordered data mode.
[    9.931172] VFS: Mounted root (ext3 filesystem) readonly.
[    9.933527] Freeing unused kernel memory: 352k freed
[    9.936004] kjournald starting.  Commit interval 5 seconds
[    9.998725] khelper used greatest stack depth: 5576 bytes left
[   10.756261] consoletype used greatest stack depth: 5472 bytes left
[   10.827307] stty used greatest stack depth: 4296 bytes left
[   10.879542] grep used greatest stack depth: 4288 bytes left


Some unfortunate news, despite the fact that the fglrx driver appeared to be working, I had only overcome my original problem. Now it's crashing, I suspect that it's not kernel related though.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sat Sep 19, 2009 10:10 pm    Post subject: Reply with quote

I found something suggesting the use of the following kernel parameters in order to fix the crash:

Code:

noapic nolapic pci=noapci


How safe are these kernel options?
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.

PostPosted: Sun Sep 20, 2009 5:06 am    Post subject: Reply with quote

They're ok, but it would be better to figure out what's wrong as opposed to just shutting off ACPI. That's usually not a good thing for laptops. I would suggest googling the model number of your computer with the word, "Linux", or checking more into the forums. There are folks who know how to fix those things without overusing amend="".

Post /var/log/dmesg so I can get a possible idea of what's happening.

Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Kruppe
Tux's lil' helper
Tux's lil' helper


Joined: 14 Oct 2008
Posts: 120

PostPosted: Sun Sep 20, 2009 5:14 am    Post subject: Reply with quote

Here is the dmesg in full.

http://pastebin.com/m78722a51

Yeah, I didn't like what I read about those kernel parameters. Seems like I could accidentally fry my cpu at worst. Not something I'm comfortable with.

For now I'm just using the xf86-video-ati drivers since they seem nice and stable. No crashes so far at least.

I did try the absolute newest fglrx which helped some but along with it came a whole slew of new bugs and oddities. Like running blazingly fast and fluid until I change workspaces (which caused a delay of about 4 seconds till something even appeared from the new workspace).
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum