| View previous topic :: View next topic |
| Author |
Message |
pingufunkybeat
l33t
Joined: 01 Dec 2004
Posts: 610
|
|
| Back to top |
|
 |
hallabro
n00b
Joined: 12 Oct 2008
Posts: 24
|
 Posted: Mon Sep 20, 2010 9:41 pm Post subject: |
 |
|
I really can't seem to get the r600 driver working for my Radeon 5700 (Juniper) for some strange reason (been trying since the initial r600 import, but now I really want to get this sorted out). I am now running latest mesa, xf86-video-ati, xorg-server and libdrm and I have tried 3 different kernels (zen-stable, zen-untable, and latest git-sources in the portage tree). I have tried with and without my Xorg,conf, but to no avail.
Xorg.log
| Code: |
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 15.912] X Protocol Version 11, Revision 0
[ 15.913] Build Operating System: Linux 2.6.35-zen3+ i686 Gentoo
[ 15.914] Current Operating System: Linux hallabro 2.6.36-rc4-git5 #1 SMP PREEMPT Tue Sep 21 01:28:33 CEST 2010 i686
[ 15.915] Kernel command line: BOOT_IMAGE=/kernel root=/dev/sdd4 rw quiet fastboot
[ 15.916] Build Date: 21 September 2010 01:09:14AM
[ 15.917]
[ 15.918] Current version of pixman: 0.18.4
[ 15.919] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.921] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.924] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 21 01:31:25 2010
[ 15.927] (II) Loader magic: 0x81f8aa0
[ 15.927] (II) Module ABI versions:
[ 15.927] X.Org ANSI C Emulation: 0.4
[ 15.927] X.Org Video Driver: 8.0
[ 15.927] X.Org XInput driver : 11.0
[ 15.927] X.Org Server Extension : 4.0
[ 15.928] (--) PCI:*(0:1:0:0) 1002:68be:174b:e138 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/131072, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 15.928] (==) Using default built-in configuration (30 lines)
[ 15.929] (==) --- Start of built-in configuration ---
[ 15.929] Section "Device"
[ 15.929] Identifier "Builtin Default ati Device 0"
[ 15.929] Driver "ati"
[ 15.929] EndSection
[ 15.929] Section "Screen"
[ 15.929] Identifier "Builtin Default ati Screen 0"
[ 15.929] Device "Builtin Default ati Device 0"
[ 15.929] EndSection
[ 15.929] Section "Device"
[ 15.929] Identifier "Builtin Default vesa Device 0"
[ 15.929] Driver "vesa"
[ 15.929] EndSection
[ 15.929] Section "Screen"
[ 15.929] Identifier "Builtin Default vesa Screen 0"
[ 15.929] Device "Builtin Default vesa Device 0"
[ 15.929] EndSection
[ 15.929] Section "Device"
[ 15.929] Identifier "Builtin Default fbdev Device 0"
[ 15.929] Driver "fbdev"
[ 15.929] EndSection
[ 15.929] Section "Screen"
[ 15.929] Identifier "Builtin Default fbdev Screen 0"
[ 15.929] Device "Builtin Default fbdev Device 0"
[ 15.929] EndSection
[ 15.929] Section "ServerLayout"
[ 15.929] Identifier "Builtin Default Layout"
[ 15.929] Screen "Builtin Default ati Screen 0"
[ 15.929] Screen "Builtin Default vesa Screen 0"
[ 15.929] Screen "Builtin Default fbdev Screen 0"
[ 15.929] EndSection
[ 15.929] (==) --- End of built-in configuration ---
[ 15.929] (==) ServerLayout "Builtin Default Layout"
[ 15.929] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[ 15.929] (**) | |-->Monitor "<default monitor>"
[ 15.930] (**) | |-->Device "Builtin Default ati Device 0"
[ 15.930] (==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
[ 15.930] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 15.930] (**) | |-->Monitor "<default monitor>"
[ 15.930] (**) | |-->Device "Builtin Default vesa Device 0"
[ 15.930] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 15.930] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 15.930] (**) | |-->Monitor "<default monitor>"
[ 15.930] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 15.930] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 15.930] (==) Not automatically adding devices
[ 15.930] (==) Not automatically enabling devices
[ 15.936] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 15.936] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.936] (==) |-->Input Device "<default pointer>"
[ 15.936] (==) |-->Input Device "<default keyboard>"
[ 15.936] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 15.936] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 15.936] (II) LoadModule: "extmod"
[ 15.939] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.940] (II) Module extmod: vendor="X.Org Foundation"
[ 15.940] compiled for 1.9.0, module version = 1.0.0
[ 15.940] Module class: X.Org Server Extension
[ 15.940] ABI class: X.Org Server Extension, version 4.0
[ 15.940] (II) Loading extension MIT-SCREEN-SAVER
[ 15.940] (II) Loading extension XFree86-VidModeExtension
[ 15.940] (II) Loading extension XFree86-DGA
[ 15.940] (II) Loading extension DPMS
[ 15.940] (II) Loading extension XVideo
[ 15.940] (II) Loading extension XVideo-MotionCompensation
[ 15.940] (II) Loading extension X-Resource
[ 15.940] (II) LoadModule: "dbe"
[ 15.941] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.941] (II) Module dbe: vendor="X.Org Foundation"
[ 15.941] compiled for 1.9.0, module version = 1.0.0
[ 15.941] Module class: X.Org Server Extension
[ 15.941] ABI class: X.Org Server Extension, version 4.0
[ 15.941] (II) Loading extension DOUBLE-BUFFER
[ 15.941] (II) LoadModule: "glx"
[ 15.941] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.943] (II) Module glx: vendor="X.Org Foundation"
[ 15.943] compiled for 1.9.0, module version = 1.0.0
[ 15.943] ABI class: X.Org Server Extension, version 4.0
[ 15.943] (==) AIGLX enabled
[ 15.943] (II) Loading extension GLX
[ 15.943] (II) LoadModule: "record"
[ 15.944] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.944] (II) Module record: vendor="X.Org Foundation"
[ 15.944] compiled for 1.9.0, module version = 1.13.0
[ 15.944] Module class: X.Org Server Extension
[ 15.944] ABI class: X.Org Server Extension, version 4.0
[ 15.944] (II) Loading extension RECORD
[ 15.944] (II) LoadModule: "dri"
[ 15.944] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.948] (II) Module dri: vendor="X.Org Foundation"
[ 15.948] compiled for 1.9.0, module version = 1.0.0
[ 15.948] ABI class: X.Org Server Extension, version 4.0
[ 15.948] (II) Loading extension XFree86-DRI
[ 15.948] (II) LoadModule: "dri2"
[ 15.948] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.948] (II) Module dri2: vendor="X.Org Foundation"
[ 15.948] compiled for 1.9.0, module version = 1.2.0
[ 15.948] ABI class: X.Org Server Extension, version 4.0
[ 15.948] (II) Loading extension DRI2
[ 15.948] (II) LoadModule: "ati"
[ 15.949] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 15.949] (II) Module ati: vendor="X.Org Foundation"
[ 15.949] compiled for 1.9.0, module version = 6.13.99
[ 15.949] Module class: X.Org Video Driver
[ 15.949] ABI class: X.Org Video Driver, version 8.0
[ 15.949] (II) LoadModule: "radeon"
[ 15.949] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 15.954] (II) Module radeon: vendor="X.Org Foundation"
[ 15.954] compiled for 1.9.0, module version = 6.13.99
[ 15.954] Module class: X.Org Video Driver
[ 15.954] ABI class: X.Org Video Driver, version 8.0
[ 15.955] (II) LoadModule: "vesa"
[ 15.957] (WW) Warning, couldn't open module vesa
[ 15.957] (II) UnloadModule: "vesa"
[ 15.957] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 15.958] (II) LoadModule: "fbdev"
[ 15.958] (WW) Warning, couldn't open module fbdev
[ 15.958] (II) UnloadModule: "fbdev"
[ 15.958] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.959] (II) LoadModule: "mouse"
[ 15.960] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 15.960] (II) Module mouse: vendor="X.Org Foundation"
[ 15.960] compiled for 1.9.0, module version = 1.5.0
[ 15.960] Module class: X.Org XInput Driver
[ 15.960] ABI class: X.Org XInput driver, version 11.0
[ 15.960] (II) LoadModule: "kbd"
[ 15.960] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 15.961] (II) Module kbd: vendor="X.Org Foundation"
[ 15.961] compiled for 1.9.0, module version = 1.4.0
[ 15.961] Module class: X.Org XInput Driver
[ 15.961] ABI class: X.Org XInput driver, version 11.0
[ 15.961] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AG[ 15.909] P), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR
[ 15.962] (--) using VT number 7
[ 15.967] (II) [KMS] Kernel modesetting enabled.
[ 15.967] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 15.967] (II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[ 15.967] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 15.967] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.967] (==) RADEON(0): Default visual is TrueColor
[ 15.967] (==) RADEON(0): RGB weight 888
[ 15.967] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 15.967] (--) RADEON(0): Chipset: "ATI Radeon HD 5700 Series" (ChipID = 0x68be)
[ 15.967] (II) RADEON(0): PCIE card detected
[ 15.967] drmOpenDevice: node name is /dev/dri/card0
[ 15.967] drmOpenDevice: open result is 7, (OK)
[ 15.967] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 15.967] drmOpenDevice: node name is /dev/dri/card0
[ 15.967] drmOpenDevice: open result is 7, (OK)
[ 15.967] drmOpenByBusid: drmOpenMinor returns 7
[ 15.967] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 15.967] (II) RADEON(0): KMS Color Tiling: disabled
[ 15.973] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 15.977] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 15.990] (II) RADEON(0): Output DVI-0 has no monitor section
[ 16.043] (II) RADEON(0): Output DVI-1 has no monitor section
[ 16.050] (II) RADEON(0): EDID for output DisplayPort-0
[ 16.054] (II) RADEON(0): EDID for output HDMI-0
[ 16.066] (II) RADEON(0): EDID for output DVI-0
[ 16.120] (II) RADEON(0): EDID for output DVI-1
[ 16.120] (II) RADEON(0): Manufacturer: BNQ Model: 790e Serial#: 21573
[ 16.120] (II) RADEON(0): Year: 2009 Week: 6
[ 16.120] (II) RADEON(0): EDID Version: 1.3
[ 16.120] (II) RADEON(0): Digital Display Input
[ 16.120] (II) RADEON(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 16.120] (II) RADEON(0): Gamma: 2.20
[ 16.120] (II) RADEON(0): DPMS capabilities: Off
[ 16.120] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 16.120] (II) RADEON(0): Default color space is primary color space
[ 16.120] (II) RADEON(0): First detailed timing is preferred mode
[ 16.120] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 16.120] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 16.120] (II) RADEON(0): Supported established timings:
[ 16.120] (II) RADEON(0): 720x400@70Hz
[ 16.120] (II) RADEON(0): 640x480@60Hz
[ 16.120] (II) RADEON(0): 640x480@67Hz
[ 16.120] (II) RADEON(0): 640x480@72Hz
[ 16.120] (II) RADEON(0): 640x480@75Hz
[ 16.120] (II) RADEON(0): 800x600@56Hz
[ 16.120] (II) RADEON(0): 800x600@60Hz
[ 16.120] (II) RADEON(0): 800x600@72Hz
[ 16.120] (II) RADEON(0): 800x600@75Hz
[ 16.120] (II) RADEON(0): 832x624@75Hz
[ 16.120] (II) RADEON(0): 1024x768@60Hz
[ 16.120] (II) RADEON(0): 1024x768@70Hz
[ 16.120] (II) RADEON(0): 1024x768@75Hz
[ 16.120] (II) RADEON(0): 1280x1024@75Hz
[ 16.120] (II) RADEON(0): 1152x864@75Hz
[ 16.120] (II) RADEON(0): Manufacturer's mask: 0
[ 16.120] (II) RADEON(0): Supported standard timings:
[ 16.120] (II) RADEON(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 16.120] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 16.120] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 16.120] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 16.120] (II) RADEON(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 16.120] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 16.120] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 16.120] (II) RADEON(0): Supported detailed timing:
[ 16.120] (II) RADEON(0): clock: 138.5 MHz Image Size: 480 x 270 mm
[ 16.120] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 16.120] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 16.120] (II) RADEON(0): Ranges: V min: 55 V max: 85 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[ 16.120] (II) RADEON(0): Monitor name: BENQ E2400HD
[ 16.120] (II) RADEON(0): Serial No: 52900325019
[ 16.120] (II) RADEON(0): EDID (in hex):
[ 16.120] (II) RADEON(0): 00ffffffffffff0009d10e7945540000
[ 16.120] (II) RADEON(0): 0613010380301b782eee95a3544c9926
[ 16.120] (II) RADEON(0): 0f5054bfef8081c0814081809500a940
[ 16.120] (II) RADEON(0): b300d1c001011a3680a070381f403020
[ 16.120] (II) RADEON(0): 3500e00e1100001e000000fd0037551e
[ 16.120] (II) RADEON(0): 5315000a202020202020000000fc0042
[ 16.120] (II) RADEON(0): 454e5120453234303048440a000000ff
[ 16.120] (II) RADEON(0): 0035323930303332353031390a20001f
[ 16.120] (II) RADEON(0): Printing probed modes for output DVI-1
[ 16.120] (II) RADEON(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
[ 16.120] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 16.120] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 16.120] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 16.120] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 16.120] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 16.120] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 16.120] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 16.120] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 16.120] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 16.120] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 16.120] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 16.120] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 16.120] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 16.120] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 16.120] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 16.120] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 16.120] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 16.120] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 16.120] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 16.120] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 16.120] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 16.120] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 16.120] (II) RADEON(0): Output HDMI-0 disconnected
[ 16.121] (II) RADEON(0): Output DVI-0 disconnected
[ 16.121] (II) RADEON(0): Output DVI-1 connected
[ 16.121] (II) RADEON(0): Using exact sizes for initial modes
[ 16.121] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 16.121] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 16.121] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:3f7d7000
[ 16.121] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 16.121] (==) RADEON(0): DPI set to (96, 96)
[ 16.121] (II) Loading sub module "fb"
[ 16.121] (II) LoadModule: "fb"
[ 16.121] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.122] (II) Module fb: vendor="X.Org Foundation"
[ 16.122] compiled for 1.9.0, module version = 1.0.0
[ 16.122] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.122] (II) Loading sub module "ramdac"
[ 16.122] (II) LoadModule: "ramdac"
[ 16.122] (II) Module "ramdac" already built-in
[ 16.122] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[ 16.122] (II) Loading sub module "shadow"
[ 16.122] (II) LoadModule: "shadow"
[ 16.122] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 16.123] (II) Module shadow: vendor="X.Org Foundation"
[ 16.123] compiled for 1.9.0, module version = 1.1.0
[ 16.123] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.123] (--) Depth 24 pixmap format is 32 bpp
[ 16.123] (II) RADEON(0): Front buffer size: 8704K
[ 16.123] (II) RADEON(0): VRAM usage limit set to 928364K
[ 16.126] (==) RADEON(0): Backing store disabled
[ 16.126] (WW) RADEON(0): Direct rendering disabled
[ 16.126] (II) RADEON(0): Acceleration disabled
[ 16.126] (==) RADEON(0): DPMS enabled
[ 16.126] (==) RADEON(0): Silken mouse enabled
[ 16.126] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.126] (--) RandR disabled
[ 16.126] (II) Initializing built-in extension Generic Event Extension
[ 16.126] (II) Initializing built-in extension SHAPE
[ 16.126] (II) Initializing built-in extension MIT-SHM
[ 16.126] (II) Initializing built-in extension XInputExtension
[ 16.126] (II) Initializing built-in extension XTEST
[ 16.126] (II) Initializing built-in extension BIG-REQUESTS
[ 16.126] (II) Initializing built-in extension SYNC
[ 16.126] (II) Initializing built-in extension XKEYBOARD
[ 16.126] (II) Initializing built-in extension XC-MISC
[ 16.126] (II) Initializing built-in extension XINERAMA
[ 16.126] (II) Initializing built-in extension XFIXES
[ 16.126] (II) Initializing built-in extension RENDER
[ 16.126] (II) Initializing built-in extension RANDR
[ 16.126] (II) Initializing built-in extension COMPOSITE
[ 16.126] (II) Initializing built-in extension DAMAGE
[ 16.133] (II) AIGLX: Screen 0 is not DRI2 capable
[ 16.133] (II) AIGLX: Screen 0 is not DRI capable
[ 16.154] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 16.154] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 16.154] (II) RADEON(0): Setting screen physical size to 507 x 285
[ 16.208] (WW) <default pointer>: No Device specified, looking for one...
[ 16.250] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 16.250] (--) <default pointer>: Device: "/dev/input/mice"
[ 16.250] (==) <default pointer>: Protocol: "Auto"
[ 16.250] (**) Option "CorePointer"
[ 16.250] (**) <default pointer>: always reports core events
[ 16.283] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 16.283] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 16.283] (**) <default pointer>: Buttons: 9
[ 16.283] (**) <default pointer>: Sensitivity: 1
[ 16.283] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[ 16.283] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 16.283] (**) <default pointer>: (accel) acceleration profile 0
[ 16.283] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 16.283] (**) <default pointer>: (accel) acceleration threshold: 4
[ 16.303] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 16.594] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 16.594] (**) Option "CoreKeyboard"
[ 16.594] (**) <default keyboard>: always reports core events
[ 16.594] (**) Option "Protocol" "standard"
[ 16.594] (**) <default keyboard>: Protocol: standard
[ 16.594] (**) Option "XkbRules" "base"
[ 16.594] (**) <default keyboard>: XkbRules: "base"
[ 16.594] (**) Option "XkbModel" "pc105"
[ 16.594] (**) <default keyboard>: XkbModel: "pc105"
[ 16.594] (**) Option "XkbLayout" "us"
[ 16.594] (**) <default keyboard>: XkbLayout: "us"
[ 16.594] (**) Option "CustomKeycodes" "off"
[ 16.594] (**) <default keyboard>: CustomKeycodes disabled
[ 16.594] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
[ 119.362] (II) 3rd Button detected: disabling emulate3Button
|
dmesg if anyone is interested:
http://www.codeupload.com/926
The firmware seems to be loading, but for some reason Xorg really doesn't like my gallium setup. Any ideas? |
|
| Back to top |
|
|
vespaman
Guru
Joined: 28 Aug 2002
Posts: 346
Location: Stockholm, Sweden
|
| Posted: Tue Sep 21, 2010 8:12 am Post subject: |
|
|
ExZombie
Thank you so much, those lines where very helpful, now it works just great.
 |
|
| Back to top |
|
|
yellowhat
Guru
Joined: 10 Sep 2008
Posts: 528
|
| Posted: Tue Sep 21, 2010 9:44 am Post subject: |
|
|
I have a Sapphire ati HD5770 and it works very good. I am using mesa-9999 (gallium), xf86-video-ati-9999 (evergreen_accel branch), libdrm-9999. xorg-server-1.8.2, vanilla-sources-2.6.36-rc5, without xorg.conf. Try with this configuration and with this ebuild for xf86-video-ati-9999:
| Code: | # Copyright 1999-2009 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $
EAPI=3
inherit xorg-2
EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/driver/xf86-video-ati"
EGIT_BRANCH="evergreen_accel"
EGIT_COMMIT="origin/evergreen_accel"
EGIT_BOOTSTRAP="./autogen.sh"
DESCRIPTION="ATI video driver"
KEYWORDS="~alpha ~amd64 ~ia64 ~ppc ~ppc64 ~sparc ~x86 ~x86-fbsd"
IUSE=""
RDEPEND=">=x11-base/xorg-server-1.6.3[-minimal]"
DEPEND="${RDEPEND}
>=x11-libs/libdrm-2.4.17[video_cards_radeon]
x11-proto/fontsproto
x11-proto/glproto
x11-proto/randrproto
x11-proto/videoproto
x11-proto/xextproto
x11-proto/xf86driproto
x11-proto/xf86miscproto
x11-proto/xproto"
pkg_setup() {
xorg-2_pkg_setup
CONFIGURE_OPTIONS="
--enable-dri
--enable-kms
"
} |
|
|
| Back to top |
|
|
hallabro
n00b
Joined: 12 Oct 2008
Posts: 24
|
| Posted: Thu Sep 23, 2010 9:37 pm Post subject: |
|
|
| yellowhat wrote: | I have a Sapphire ati HD5770 and it works very good. I am using mesa-9999 (gallium), xf86-video-ati-9999 (evergreen_accel branch), libdrm-9999. xorg-server-1.8.2, vanilla-sources-2.6.36-rc5, without xorg.conf. Try with this configuration and with this ebuild for xf86-video-ati-9999:
| Code: | # Copyright 1999-2009 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $
EAPI=3
inherit xorg-2
EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/driver/xf86-video-ati"
EGIT_BRANCH="evergreen_accel"
EGIT_COMMIT="origin/evergreen_accel"
EGIT_BOOTSTRAP="./autogen.sh"
DESCRIPTION="ATI video driver"
KEYWORDS="~alpha ~amd64 ~ia64 ~ppc ~ppc64 ~sparc ~x86 ~x86-fbsd"
IUSE=""
RDEPEND=">=x11-base/xorg-server-1.6.3[-minimal]"
DEPEND="${RDEPEND}
>=x11-libs/libdrm-2.4.17[video_cards_radeon]
x11-proto/fontsproto
x11-proto/glproto
x11-proto/randrproto
x11-proto/videoproto
x11-proto/xextproto
x11-proto/xf86driproto
x11-proto/xf86miscproto
x11-proto/xproto"
pkg_setup() {
xorg-2_pkg_setup
CONFIGURE_OPTIONS="
--enable-dri
--enable-kms
"
} |
|
You just made my day. Thanks! |
|
| Back to top |
|
|
pingufunkybeat
l33t
Joined: 01 Dec 2004
Posts: 610
|
| Posted: Wed Sep 29, 2010 11:01 pm Post subject: |
|
|
OK, stupid question.
I wanted to try r600g. I used the mesa build from the first post, set the "gallium" USE flag and recompiled.
There is no gallium driver in /usr/lib64/dri.
What am I missing? Do I need the X overlay (I'd rather avoid it). |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Thu Sep 30, 2010 6:49 am Post subject: |
|
|
| pingufunkybeat wrote: | OK, stupid question.
I wanted to try r600g. I used the mesa build from the first post, set the "gallium" USE flag and recompiled.
There is no gallium driver in /usr/lib64/dri.
What am I missing? Do I need the X overlay (I'd rather avoid it). |
my original mesa is not updated, get the meas+eselect-mesa from x11-overlay.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
pingufunkybeat
l33t
Joined: 01 Dec 2004
Posts: 610
|
| Posted: Thu Sep 30, 2010 5:53 pm Post subject: |
|
|
OK, I've taken mesa-9999, libdrm-9999 and eselect-mesa-0.0.6 from the x11 overlay and now I have gallium working. I had to change the Mesa ebuild, since it requires a version of libX11 that is not in portage (libX11 in portage is plenty enough). I also needed the libdrm from the overlay, since the use flags changed, and mesa refused to build.
r600g works fine here, but is not as fast as the classic driver. It should reach parity relatively soon, though. |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Thu Sep 30, 2010 6:11 pm Post subject: |
|
|
| pingufunkybeat wrote: | OK, I've taken mesa-9999, libdrm-9999 and eselect-mesa-0.0.6 from the x11 overlay and now I have gallium working. I had to change the Mesa ebuild, since it requires a version of libX11 that is not in portage (libX11 in portage is plenty enough). I also needed the libdrm from the overlay, since the use flags changed, and mesa refused to build.
r600g works fine here, but is not as fast as the classic driver. It should reach parity relatively soon, though. |
strange, why it needs that?
my mesa ebuild doesn't need libX11.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
pingufunkybeat
l33t
Joined: 01 Dec 2004
Posts: 610
|
| Posted: Thu Sep 30, 2010 8:04 pm Post subject: |
|
|
No idea, but that's why I was avoiding the builds from the x overlay until now -- they tend to depend on really recent experimental packages, and often they are not needed.
Anyway, mesa refused to build with libX11 < 1.3.99, which is not necessary AFAIK.
So, for anyone who wants to try r600g, you will only need libdrm, mesa, eselect-mesa from the overlay. You can take xf86-video-ati from here or from the overlay. You need to remove the dependency on libX11 from the mesa-9999 ebuild, rebuild libdrm, and then you're all set to emerge mesa.
This is where pretty much all the coding is going on now, airlied and jglisse have some time to dedicate to it, and Marek has been making commits there too. It should be shaping up really fast.
KWin effects don't seem to work with it, though. It complains about being too slow. I didn't try disabling checks. |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Tue Oct 26, 2010 5:40 pm Post subject: |
|
|
anyone has the guts to try the new driver with XvMC support and report?
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
Tariella
Guru
Joined: 10 Dec 2005
Posts: 384
Location: Europe/Austria
|
| Posted: Wed Oct 27, 2010 5:35 pm Post subject: |
|
|
I wanted to try the new r600 driver with XvMC support . I'm already running the r600 driver but haven't been able to update them for a while due to mesa-9999 failing to install (compile worked as far as I could see).
The error message is the following:
| Code: | * ERROR: media-libs/mesa-9999 failed:
* failed to copy the glsl compiler.
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 3942: Called die
* The specific snippet of code:
* cp "${S}"/src/glsl/apps/compile "${D}"/usr/bin/glsl-compile || die "failed to copy the glsl compiler.";
|
Any ideas? |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Wed Oct 27, 2010 5:52 pm Post subject: |
|
|
| Tariella wrote: | I wanted to try the new r600 driver with XvMC support . I'm already running the r600 driver but haven't been able to update them for a while due to mesa-9999 failing to install (compile worked as far as I could see).
The error message is the following:
| Code: | * ERROR: media-libs/mesa-9999 failed:
* failed to copy the glsl compiler.
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 3942: Called die
* The specific snippet of code:
* cp "${S}"/src/glsl/apps/compile "${D}"/usr/bin/glsl-compile || die "failed to copy the glsl compiler.";
|
Any ideas? |
resync the ebuild
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
Tariella
Guru
Joined: 10 Dec 2005
Posts: 384
Location: Europe/Austria
|
| Posted: Wed Oct 27, 2010 6:22 pm Post subject: |
|
|
Thanks.
It seems my x11 overlay had been moved (by layman?) from the overlays directory to /var..
I hadn't noticed that there were problems with syncing it for a while. 
Maybe I should sync "manually" more often and not use eix-sync 
Edit: New error with mesa-9999
| Code: | ../w32api/winnt.h:641: Warnung: Attribute an Spezifizierer ausführlichen Typs ignoriert, der keine Vorwärtsdeklaration ist
In file included from tools/fxdis.cpp:28:
include/sm4.h:43: Fehler: expected identifier before »extern«
include/sm4.h:43: Fehler: expected »}« before »extern«
include/sm4.h:43: Fehler: zwei oder mehr Datentypen in Deklaration von »sm4_opcode_names«
gmake[5]: *** [tools/fxdis.o] Fehler 1
|
|
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Wed Oct 27, 2010 11:48 pm Post subject: |
|
|
I've been trying to get this working since yesterday. The card is a 5850. Currently have:
mesa-9999
xf86-video-ati-9999
libdrm-9999
xorg-server-1.9.1
gentoo-sources-2.6.36
made sure I had all options specified in the radeon build howto with the xorg wiki. Even so, the not so fun messages:
| Code: |
[~] glxinfo | grep OpenGL [omega]
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
OpenGL version string: 2.1 Mesa 7.10-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
|
| Code: |
[~] eselect mesa list [omega]
i915 (Intel 915, 945)
i965 (Intel 965, G/Q3x, G/Q4x)
r300 (Radeon R300-R500)
classic
gallium *
r600 (Radeon R600-R700)
classic
gallium *
sw (Software renderer)
classic
gallium *
|
I cut all the unimportant stuff out of the log.
| Code: |
X.Org X Server 1.9.1
Release Date: 2010-10-22
[ 36.760] X Protocol Version 11, Revision 0
[ 36.760] Build Operating System: Linux 2.6.36-gentoo x86_64 Gentoo
[ 36.760] Current Operating System: Linux omega 2.6.36-gentoo #1 SMP Wed Oct 27 11:54:27 Local time zone must be set--see zic x86_64
[ 36.760] Kernel command line: root=/dev/sda4 radeon.modeset=0
[ 36.761] Build Date: 27 October 2010 06:32:42PM
[ 36.761]
[ 36.761] Current version of pixman: 0.18.4
[ 36.761] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.762] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.763] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 27 20:23:11 2010
[ 36.766] (==) Using config file: "/etc/X11/xorg.conf"
[ 36.766] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 36.768] (==) ServerLayout "X.org Configured"
[ 36.768] (**) |-->Screen "Screen0" (0)
[ 36.768] (**) | |-->Monitor "<default monitor>"
[ 36.768] (**) | |-->Device "Card0"
[ 36.768] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 36.768] (**) |-->Input Device "Mouse0"
[ 36.768] (**) |-->Input Device "Keyboard0"
[ 36.768] (==) Automatically adding devices
[ 36.768] (==) Automatically enabling devices
[ 36.769] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 36.769] Entry deleted from font path.
[ 36.769] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 36.769] Entry deleted from font path.
[ 36.769] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 36.769] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 36.770] Entry deleted from font path.
[ 36.770] (**) FontPath set to:
[ 36.770] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 36.770] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 36.770] (WW) Disabling Mouse0
[ 36.770] (WW) Disabling Keyboard0
[ 36.770] (II) Loader magic: 0x7ca640
[ 36.770] (II) Module ABI versions:
[ 36.770] X.Org ANSI C Emulation: 0.4
[ 36.770] X.Org Video Driver: 8.0
[ 36.770] X.Org XInput driver : 11.0
[ 36.770] X.Org Server Extension : 4.0
[ 36.770] (--) PCI:*(0:1:0:0) 1002:6899:1043:0330 rev 0, Mem @ 0xc0000000/268435456, 0xbfbe0000/131072, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 36.770] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 36.770] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 36.770] (II) LoadModule: "extmod"
[ 36.775] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 36.776] (II) Module extmod: vendor="X.Org Foundation"
[ 36.776] compiled for 1.9.1, module version = 1.0.0
[ 36.776] Module class: X.Org Server Extension
[ 36.776] ABI class: X.Org Server Extension, version 4.0
[ 36.776] (II) Loading extension MIT-SCREEN-SAVER
[ 36.776] (II) Loading extension XFree86-VidModeExtension
[ 36.776] (II) Loading extension XFree86-DGA
[ 36.776] (II) Loading extension DPMS
[ 36.776] (II) Loading extension XVideo
[ 36.776] (II) Loading extension XVideo-MotionCompensation
[ 36.777] (II) Loading extension X-Resource
[ 36.777] (II) LoadModule: "glx"
[ 36.778] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 36.782] (II) Module glx: vendor="X.Org Foundation"
[ 36.782] compiled for 1.9.1, module version = 1.0.0
[ 36.782] ABI class: X.Org Server Extension, version 4.0
[ 36.782] (==) AIGLX enabled
[ 36.782] (II) Loading extension GLX
[ 36.782] (II) LoadModule: "dri"
[ 36.784] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 36.785] (II) Module dri: vendor="X.Org Foundation"
[ 36.785] compiled for 1.9.1, module version = 1.0.0
[ 36.785] ABI class: X.Org Server Extension, version 4.0
[ 36.785] (II) Loading extension XFree86-DRI
[ 36.785] (II) LoadModule: "dbe"
[ 36.785] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 36.786] (II) Module dbe: vendor="X.Org Foundation"
[ 36.786] compiled for 1.9.1, module version = 1.0.0
[ 36.786] Module class: X.Org Server Extension
[ 36.786] ABI class: X.Org Server Extension, version 4.0
[ 36.786] (II) Loading extension DOUBLE-BUFFER
[ 36.786] (II) LoadModule: "record"
[ 36.786] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 36.787] (II) Module record: vendor="X.Org Foundation"
[ 36.787] compiled for 1.9.1, module version = 1.13.0
[ 36.787] Module class: X.Org Server Extension
[ 36.787] ABI class: X.Org Server Extension, version 4.0
[ 36.787] (II) Loading extension RECORD
[ 36.787] (II) LoadModule: "dri2"
[ 36.787] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 36.788] (II) Module dri2: vendor="X.Org Foundation"
[ 36.788] compiled for 1.9.1, module version = 1.2.0
[ 36.788] ABI class: X.Org Server Extension, version 4.0
[ 36.788] (II) Loading extension DRI2
[ 36.788] (II) LoadModule: "radeon"
[ 36.790] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 36.796] (II) Module radeon: vendor="X.Org Foundation"
[ 36.796] compiled for 1.9.1, module version = 6.13.99
[ 36.796] Module class: X.Org Video Driver
[ 36.796] ABI class: X.Org Video Driver, version 8.0
[ 36.79 36.803] (II) [KMS] drm report modesetting isn't supported.
[ 36.803] (II) RADEON(0): TOTO SAYS 00000000bfbe0000
[ 36.803] (II) RADEON(0): MMIO registers at 0x00000000bfbe0000: size 128KB
[ 36.803] (II) RADEON(0): PCI bus 1 card 0 func 0
[ 36.803] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 36.803] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 36.803] (==) RADEON(0): Default visual is TrueColor
[ 36.803] (**) RADEON(0): Option "AGPMode" "4"
[ 36.803] (**) RADEON(0): Option "AccelDFS" "true"
[ 36.803] (**) RADEON(0): Option "RenderAccel" "true"
[ 36.803] (**) RADEON(0): Option "AccelMethod" "EXA"
[ 36.803] (**) RADEON(0): Option "DRI" "true"
[ 36.803] (II) Loading sub module "vgahw"
[ 36.803] (II) LoadModule: "vgahw"
[ 36.803] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 36.804] (II) Module vgahw: vendor="X.Org Foundation"
[ 36.804] compiled for 1.9.1, module version = 0.1.0
[ 36.804] ABI class: X.Org Video Driver, version 8.0
[ 36.804] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 36.804] (==) RADEON(0): RGB weight 888
[ 36.804] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 36.804] (--) RADEON(0): Chipset: "ATI Radeon HD 5800 Series" (ChipID = 0x6899)
[ 36.804] (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
[ 36.804] (II) RADEON(0): PCIE card detected
[ 36.804] (II) Loading sub module "int10"
[ 36.804] (II) LoadModule: "int10"
[ 36.804] (II) Loading /usr/lib64/xorg/modules/libint10.so
[ 36.806] (II) Module int10: vendor="X.Org Foundation"
[ 36.806] compiled for 1.9.1, module version = 1.0.0
[ 36.806] ABI class: X.Org Video Driver, version 8.0
[ 36.806] (II) RADEON(0): initializing int10
[ 36.806] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[ 36.806] (II) RADEON(0): ATOM BIOS detected
[ 36.807] (II) RADEON(0): ATOM BIOS Rom:
[ 36.807] SubsystemVendorID: 0x1043 SubsystemID: 0x0330
[ 36.807] IOBaseAddress: 0xa000
[ 36.807] Filename: S3C00201.100
[ 36.807] BIOS Bootup Message:
6899.12.11.0.6.AS01
[ 36.807] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[ 36.807] (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffec
[ 36.807] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[ 36.807] (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffec
[ 36.807] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[ 36.807] (II) RADEON(0): Default Engine Clock: 400000
[ 36.807] (II) RADEON(0): Default Memory Clock: 900000
[ 36.807] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[ 36.807] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 36.807] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 27000
[ 36.807] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6750
[ 36.807] (II) RADEON(0): Maximum Pixel Clock: 400000
[ 36.807] (II) RADEON(0): Reference Clock: 27000
[ 36.807] (II) RADEON(0): No DRI yet on Evergreen
[ 36.807] (II) RADEON(0): using shadow framebuffer
[ 36.807] (II) Loading sub module "shadow"
[ 36.807] (II) LoadModule: "shadow"
[ 36.807] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 36.808] (II) Module shadow: vendor="X.Org Foundation"
[ 36.808] compiled for 1.9.1, module version = 1.1.0
[ 36.808] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.808] (II) RADEON(0): Detected total video RAM=1048576K, accessible=262144K (PCI BAR=262144K)
[ 36.808] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
[ 36.808] (II) RADEON(0): Color tiling disabled
[ 36.808] (II) Loading sub module "ddc"
[ 36.808] (II) LoadModule: "ddc"
[ 36.808] (II) Module "ddc" already built-in
[ 36.808] (II) Loading sub module "i2c"
[ 36.808] (II) LoadModule: "i2c"
[ 36.808] (II) Module "i2c" already built-in
[ 36.808] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
[ 36.808] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 36.808] (II) RADEON(0): I2C bus "DisplayPort-0-DP" initialized.
[ 36.810] RADEONDPEncoderService: 1 19
[ 36.810] (II) RADEON(0): I2C bus "DisplayPort-0" initialized.
[ 36.810] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 36.810] (II) RADEON(0): I2C bus "HDMI-0" initialized.
[ 36.810] (II) RADEON(0): Output DVI-1 has no monitor section
[ 36.810] (II) RADEON(0): I2C bus "DVI-1" initialized.
[ 36.810] (II) RADEON(0): Output DVI-0 has no monitor section
[ 36.810] (II) RADEON(0): I2C bus "DVI-0" initialized.
[ 36.810] (II) RADEON(0): Port0:
[ 36.810] XRANDR name: DisplayPort-0
[ 36.810] Connector: DisplayPort
[ 36.810] DFP1: INTERNAL_UNIPHY2
[ 36.810] DDC reg: 0x6430
[ 36.810] (II) RADEON(0): Port1:
[ 36.810] XRANDR name: HDMI-0
[ 36.810] Connector: HDMI-A
[ 36.810] DFP2: INTERNAL_UNIPHY2
[ 36.810] DDC reg: 0x6460
[ 36.810] (II) RADEON(0): Port2:
[ 36.810] XRANDR name: DVI-1
[ 36.810] Connector: DVI-I
[ 36.810] CRT2: INTERNAL_KLDSCP_DAC2
[ 36.810] DFP3: INTERNAL_UNIPHY1
[ 36.810] DDC reg: 0x6450
[ 36.810] (II) RADEON(0): Port3:
[ 36.810] XRANDR name: DVI-0
[ 36.810] Connector: DVI-I
[ 36.810] CRT1: INTERNAL_KLDSCP_DAC1
[ 36.810] DFP4: INTERNAL_UNIPHY
[ 36.810] DDC reg: 0x6470
[ 36.813] RADEONDPEncoderService: 1 19
[ 36.813] (II) RADEON(0): I2C device "DisplayPort-0-DP:ddc2" registered at address 0xA0.
[ 36.813] failed to get auxch 0030 40 30 02 after 0 retries
[ 36.813] failed to get auxch 0031 40 30 02 after 0 retries
[ 36.813] failed to get auxch 0037 40 30 02 after 0 retries
[ 36.814] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.814] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.814] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.814] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.814] (II) RADEON(0): I2C device "DisplayPort-0:ddc2" registered at address 0xA0.
[ 36.817] (II) RADEON(0): Output: DisplayPort-0, Detected Monitor Type: 0
[ 36.817] finished output detect: 0
[ 36.817] (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
[ 36.821] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[ 36.821] finished output detect: 1
[ 36.821] (II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
[ 36.823] (II) RADEON(0): I2C device "DVI-1:DDC control interface" registered at address 0x6E.
[ 36.877] (II) RADEON(0): EDID for output DVI-1
[ 36.877] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 810373708
[ 36.877] (II) RADEON(0): Year: 2009 Week: 15
[ 36.877] (II) RADEON(0): EDID Version: 1.3
[ 36.877] (II) RADEON(0): Digital Display Input
[ 36.877] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 36.877] (II) RADEON(0): Gamma: 2.20
[ 36.877] (II) RADEON(0): DPMS capabilities: Off
[ 36.877] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.877] (II) RADEON(0): Default color space is primary color space
[ 36.877] (II) RADEON(0): First detailed timing is preferred mode
[ 36.877] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 36.877] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 36.877] (II) RADEON(0): Supported established timings:
[ 36.877] (II) RADEON(0): 720x400@70Hz
[ 36.877] (II) RADEON(0): 640x480@60Hz
[ 36.877] (II) RADEON(0): 640x480@75Hz
[ 36.877] (II) RADEON(0): 800x600@60Hz
[ 36.877] (II) RADEON(0): 800x600@75Hz
[ 36.877] (II) RADEON(0): 1024x768@60Hz
[ 36.877] (II) RADEON(0): 1024x768@75Hz
[ 36.877] (II) RADEON(0): 1280x1024@75Hz
[ 36.877] (II) RADEON(0): Manufacturer's mask: 0
[ 36.877] (II) RADEON(0): Supported standard timings:
[ 36.877] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 36.877] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.877] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.877] (II) RADEON(0): Supported detailed timing:
[ 36.877] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 36.877] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 36.877] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 36.877] (II) RADEON(0): Serial No: H736H94B0MRL
[ 36.877] (II) RADEON(0): Monitor name: DELL 2209WA
[ 36.877] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 36.877] (II) RADEON(0): EDID (in hex):
[ 36.877] (II) RADEON(0): 00ffffffffffff0010ac11f04c524d30
[ 36.877] (II) RADEON(0): 0f130103802f1e782eee95a3544c9926
[ 36.877] (II) RADEON(0): 0f5054a54b00714f8180b30001010101
[ 36.877] (II) RADEON(0): 01010101010121399030621a274068b0
[ 36.877] (II) RADEON(0): 3600da281100001c000000ff00483733
[ 36.877] (II) RADEON(0): 3648393442304d524c0a000000fc0044
[ 36.877] (II) RADEON(0): 454c4c203232303957410a20000000fd
[ 36.877] (II) RADEON(0): 00384b1e5310000a20202020202000db
[ 36.877] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[ 36.877] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[ 36.878] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 810373708
[ 36.878] (II) RADEON(0): Year: 2009 Week: 15
[ 36.878] (II) RADEON(0): EDID Version: 1.3
[ 36.878] (II) RADEON(0): Digital Display Input
[ 36.878] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 36.878] (II) RADEON(0): Gamma: 2.20
[ 36.878] (II) RADEON(0): DPMS capabilities: Off
[ 36.878] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.878] (II) RADEON(0): Default color space is primary color space
[ 36.878] (II) RADEON(0): First detailed timing is preferred mode
[ 36.878] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 36.878] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 36.878] (II) RADEON(0): Supported established timings:
[ 36.878] (II) RADEON(0): 720x400@70Hz
[ 36.878] (II) RADEON(0): 640x480@60Hz
[ 36.878] (II) RADEON(0): 640x480@75Hz
[ 36.878] (II) RADEON(0): 800x600@60Hz
[ 36.878] (II) RADEON(0): 800x600@75Hz
[ 36.878] (II) RADEON(0): 1024x768@60Hz
[ 36.878] (II) RADEON(0): 1024x768@75Hz
[ 36.878] (II) RADEON(0): 1280x1024@75Hz
[ 36.878] (II) RADEON(0): Manufacturer's mask: 0
[ 36.878] (II) RADEON(0): Supported standard timings:
[ 36.878] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 36.878] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.878] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.878] (II) RADEON(0): Supported detailed timing:
[ 36.878] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 36.878] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 36.878] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 36.878] (II) RADEON(0): Serial No: H736H94B0MRL
[ 36.878] (II) RADEON(0): Monitor name: DELL 2209WA
[ 36.878] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 36.878] (II) RADEON(0): EDID (in hex):
[ 36.878] (II) RADEON(0): 00ffffffffffff0010ac11f04c524d30
[ 36.878] (II) RADEON(0): 0f130103802f1e782eee95a3544c9926
[ 36.878] (II) RADEON(0): 0f5054a54b00714f8180b30001010101
[ 36.878] (II) RADEON(0): 01010101010121399030621a274068b0
[ 36.878] (II) RADEON(0): 3600da281100001c000000ff00483733
[ 36.878] (II) RADEON(0): 3648393442304d524c0a000000fc0044
[ 36.878] (II) RADEON(0): 454c4c203232303957410a20000000fd
[ 36.878] (II) RADEON(0): 00384b1e5310000a20202020202000db
[ 36.878] finished output detect: 2
[ 36.878] (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
[ 36.880] (II) RADEON(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
[ 36.933] (II) RADEON(0): EDID for output DVI-0
[ 36.933] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 808928844
[ 36.933] (II) RADEON(0): Year: 2008 Week: 51
[ 36.933] (II) RADEON(0): EDID Version: 1.3
[ 36.933] (II) RADEON(0): Digital Display Input
[ 36.933] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 36.933] (II) RADEON(0): Gamma: 2.20
[ 36.933] (II) RADEON(0): DPMS capabilities: Off
[ 36.933] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.933] (II) RADEON(0): Default color space is primary color space
[ 36.933] (II) RADEON(0): First detailed timing is preferred mode
[ 36.933] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 36.933] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 36.933] (II) RADEON(0): Supported established timings:
[ 36.934] (II) RADEON(0): 720x400@70Hz
[ 36.934] (II) RADEON(0): 640x480@60Hz
[ 36.934] (II) RADEON(0): 640x480@75Hz
[ 36.934] (II) RADEON(0): 800x600@60Hz
[ 36.934] (II) RADEON(0): 800x600@75Hz
[ 36.934] (II) RADEON(0): 1024x768@60Hz
[ 36.934] (II) RADEON(0): 1024x768@75Hz
[ 36.934] (II) RADEON(0): 1280x1024@75Hz
[ 36.934] (II) RADEON(0): Manufacturer's mask: 0
[ 36.934] (II) RADEON(0): Supported standard timings:
[ 36.934] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 36.934] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.934] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.934] (II) RADEON(0): Supported detailed timing:
[ 36.934] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 36.934] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 36.934] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 36.934] (II) RADEON(0): Serial No: H736H8CH07FL
[ 36.934] (II) RADEON(0): Monitor name: DELL 2209WA
[ 36.934] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 36.934] (II) RADEON(0): EDID (in hex):
[ 36.934] (II) RADEON(0): 00ffffffffffff0010ac11f04c463730
[ 36.934] (II) RADEON(0): 33120103802f1e782eee95a3544c9926
[ 36.934] (II) RADEON(0): 0f5054a54b00714f8180b30001010101
[ 36.934] (II) RADEON(0): 01010101010121399030621a274068b0
[ 36.934] (II) RADEON(0): 3600da281100001c000000ff00483733
[ 36.934] (II) RADEON(0): 36483843483037464c0a000000fc0044
[ 36.934] (II) RADEON(0): 454c4c203232303957410a20000000fd
[ 36.934] (II) RADEON(0): 00384b1e5310000a20202020202000e8
[ 36.934] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
[ 36.934] (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
[ 36.934] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 808928844
[ 36.934] (II) RADEON(0): Year: 2008 Week: 51
[ 36.934] (II) RADEON(0): EDID Version: 1.3
[ 36.934] (II) RADEON(0): Digital Display Input
[ 36.934] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 36.934] (II) RADEON(0): Gamma: 2.20
[ 36.934] (II) RADEON(0): DPMS capabilities: Off
[ 36.934] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.934] (II) RADEON(0): Default color space is primary color space
[ 36.934] (II) RADEON(0): First detailed timing is preferred mode
[ 36.934] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 36.934] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 36.934] (II) RADEON(0): Supported established timings:
[ 36.934] (II) RADEON(0): 720x400@70Hz
[ 36.934] (II) RADEON(0): 640x480@60Hz
[ 36.934] (II) RADEON(0): 640x480@75Hz
[ 36.934] (II) RADEON(0): 800x600@60Hz
[ 36.934] (II) RADEON(0): 800x600@75Hz
[ 36.934] (II) RADEON(0): 1024x768@60Hz
[ 36.934] (II) RADEON(0): 1024x768@75Hz
[ 36.934] (II) RADEON(0): 1280x1024@75Hz
[ 36.934] (II) RADEON(0): Manufacturer's mask: 0
[ 36.934] (II) RADEON(0): Supported standard timings:
[ 36.934] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 36.934] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.934] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.934] (II) RADEON(0): Supported detailed timing:
[ 36.934] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 36.934] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 36.934] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 36.934] (II) RADEON(0): Serial No: H736H8CH07FL
[ 36.934] (II) RADEON(0): Monitor name: DELL 2209WA
[ 36.934] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 36.934] (II) RADEON(0): EDID (in hex):
[ 36.934] (II) RADEON(0): 00ffffffffffff0010ac11f04c463730
[ 36.934] (II) RADEON(0): 33120103802f1e782eee95a3544c9926
[ 36.934] (II) RADEON(0): 0f5054a54b00714f8180b30001010101
[ 36.934] (II) RADEON(0): 01010101010121399030621a274068b0
[ 36.934] (II) RADEON(0): 3600da281100001c000000ff00483733
[ 36.934] (II) RADEON(0): 36483843483037464c0a000000fc0044
[ 36.934] (II) RADEON(0): 454c4c203232303957410a20000000fd
[ 36.934] (II) RADEON(0): 00384b1e5310000a20202020202000e8
[ 36.934] finished output detect: 3
[ 36.934] finished all detect
[ 36.936] RADEONDPEncoderService: 1 19
[ 36.936] failed to get auxch 0030 40 30 02 after 0 retries
[ 36.936] failed to get auxch 0031 40 30 02 after 0 retries
[ 36.936] failed to get auxch 0037 40 30 02 after 0 retries
[ 36.937] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.937] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.937] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.937] failed to get auxch 0050 40 30 02 after 0 retries
[ 36.940] (II) RADEON(0): Output: DisplayPort-0, Detected Monitor Type: 0
[ 36.940] (II) RADEON(0): EDID for output DisplayPort-0
[ 36.944] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[ 36.944] (II) RADEON(0): EDID for output HDMI-0
[ 37.000] (II) RADEON(0): EDID for output DVI-1
[ 37.000] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 810373708
[ 37.000] (II) RADEON(0): Year: 2009 Week: 15
[ 37.000] (II) RADEON(0): EDID Version: 1.3
[ 37.000] (II) RADEON(0): Digital Display Input
[ 37.000] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
7] (II) RADEON: Driver for ATI Radeon chipsets:
[ 37.221] (II) RADEON(0): Will use 96 kb for hardware cursor 5 at offset 0x01722000
[ 37.221] (II) RADEON(0): Largest offscreen area available: 3584 x 6497
[ 37.221] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
[ 37.231] Output DIG-1 encoder setup success
[ 37.231] Disable CRTC memreq 0 success
[ 37.231] Disable CRTC 0 success
[ 37.231] Set CRTC 0 Source success
[ 37.231] Mode 1680x1050 - 2240 1089 6
[ 37.231] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 37.231] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
[ 37.231] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 37.241] Set DCPLL success
[ 37.241] Picked PLL 0
[ 37.241] before 14625 0x20
[ 37.241] after 14625 0 0
[ 37.241] best_freq: 146250
[ 37.241] best_feedback_div: 130
[ 37.241] best_frac_feedback_div: 0
[ 37.241] best_ref_div: 3
[ 37.241] best_post_div: 8
[ 37.241] (II) RADEON(0): crtc(0) Clock: mode 146250, PLL 1462500
[ 37.241] (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 8
[ 37.244] Set CRTC 0 PLL success
[ 37.244] Set DTD CRTC Timing success
[ 37.244] Set CRTC 0 Overscan success
[ 37.279] Set CRTC 1 Source success
[ 37.279] Mode 1680x1050 - 1840 1080 9
[ 37.279] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 37.279] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
[ 37.279] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 37.289] Set DCPLL success
[ 37.289] Picked PLL 1
[ 37.289] before 11900 0x20
[ 37.289] after 11900 0 0
[ 37.289] best_freq: 119185
[ 37.289] best_feedback_div: 309
[ 37.289] best_frac_feedback_div: 0
[ 37.289] best_ref_div: 7
[ 37.289] best_post_div: 10
[ 37.289] (II) RADEON(0): crtc(1) Clock: mode 119000, PLL 1191850
[ 37.289] (II) RADEON(0): crtc(1) PLL : refdiv 7, fbdiv 0x135(309), fracfbdiv 0, pdiv 10
[ 37.291] Set CRTC 1 PLL success
[ 37.291] Set DTD CRTC Timing success
[ 37.291] Set CRTC 1 Overscan success
[ 37.291] Not using RMX
[ 37.291] scaler 1 setup success
[ 37.291] Set CRTC 1 Source success
[ 37.292] Output UNIPHY0 transmitter setup success
[ 37.292] Output DIG0 encoder setup success
[ 37.292] Output UNIPHY0 transmitter setup success
[ 37.292] Output UNIPHY0 transmitter setup success
[ 37.310] Disable CRTC 5 success
[ 37.310] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 37.326] Blank CRTC 1 success
[ 37.326] Disable CRTC memreq 1 success
[ 37.343] Disable CRTC 1 success
[ 37.343] Lock CRTC 1 success
[ 37.359] Blank CRTC 0 success
[ 37.359] Disable CRTC memreq 0 success
[ 37.376] Disable CRTC 0 success
[ 37.376] Set CRTC 0 Source success
[ 37.376] Mode 1680x1050 - 2240 1089 6
[ 37.376] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 37.376] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
[ 37.376] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 37.386] Set DCPLL success
[ 37.386] Picked PLL 0
[ 37.386] before 14625 0x20
[ 37.386] after 14625 0 0
[ 37.386] best_freq: 146250
[ 37.386] best_feedback_div: 130
[ 37.386] best_frac_feedback_div: 0
[ 37.386] best_ref_div: 3
[ 37.386] best_post_div: 8
[ 37.386] (II) RADEON(0): crtc(0) Clock: mode 146250, PLL 1462500
[ 37.386] (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 8
[ 37.386] Set CRTC 0 PLL success
[ 37.386] Set DTD CRTC Timing success
[ 37.386] Set CRTC 0 Overscan success
[ 37.386] Not using RMX
[ 37.386] scaler 0 setup success
[ 37.386] Set CRTC 0 Source success
[ 37.387] Output UNIPHY1 transmitter setup success
[ 37.387] Output DIG2 encoder setup success
[ 37.387] Output UNIPHY1 transmitter setup success
[ 37.388] Output UNIPHY1 transmitter setup success
[ 37.388] Enable CRTC 1 success
[ 37.388] Enable CRTC memreq 1 success
[ 37.388] Unblank CRTC 1 success
[ 37.404] Unlock CRTC 1 success
[ 37.404] Enable CRTC 0 success
[ 37.404] Enable CRTC memreq 0 success
[ 37.404] Unblank CRTC 0 success
[ 37.421] Blank CRTC 0 success
[ 37.421] Disable CRTC memreq 0 success
[ 37.438] Disable CRTC 0 success
[ 37.438] Lock CRTC 0 success
[ 37.454] Blank CRTC 1 success
[ 37.454] Disable CRTC memreq 1 success
[ 37.471] Disable CRTC 1 success
[ 37.471] Set CRTC 1 Source success
[ 37.471] Mode 1680x1050 - 1840 1080 9
[ 37.471] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 37.471] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
[ 37.471] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 37.481] Set DCPLL success
[ 37.481] Picked PLL 1
[ 37.481] before 11900 0x20
[ 37.481] after 11900 0 0
[ 37.481] best_freq: 119185
[ 37.481] best_feedback_div: 309
[ 37.481] best_frac_feedback_div: 0
[ 37.481] best_ref_div: 7
[ 37.481] best_post_div: 10
[ 37.481] (II) RADEON(0): crtc(1) Clock: mode 119000, PLL 1191850
[ 37.481] (II) RADEON(0): crtc(1) PLL : refdiv 7, fbdiv 0x135(309), fracfbdiv 0, pdiv 10
[ 37.481] Set CRTC 1 PLL success
[ 37.481] Set DTD CRTC Timing success
[ 37.481] Set CRTC 1 Overscan success
[ 37.481] Not using RMX
[ 37.481] scaler 1 setup success
[ 37.481] Set CRTC 1 Source success
[ 37.482] Output UNIPHY0 transmitter setup success
[ 37.482] Output DIG0 encoder setup success
[ 37.482] Output UNIPHY0 transmitter setup success
[ 37.483] Output UNIPHY0 transmitter setup success
[ 37.483] Enable CRTC 0 success
[ 37.483] Enable CRTC memreq 0 success
[ 37.483] Unblank CRTC 0 success
[ 37.499] Unlock CRTC 0 success
[ 37.499] Enable CRTC 1 success
[ 37.499] Enable CRTC memreq 1 success
[ 37.499] Unblank CRTC 1 success
[ 37.499] (--) RandR disabled
[ 37.499] (II) Initializing built-in extension Generic Event Extension
[ 37.499] (II) Initializing built-in extension SHAPE
[ 37.499] (II) Initializing built-in extension MIT-SHM
[ 37.499] (II) Initializing built-in extension XInputExtension
[ 37.499] (II) Initializing built-in extension XTEST
[ 37.499] (II) Initializing built-in extension BIG-REQUESTS
[ 37.499] (II) Initializing built-in extension SYNC
[ 37.499] (II) Initializing built-in extension XKEYBOARD
[ 37.499] (II) Initializing built-in extension XC-MISC
[ 37.499] (II) Initializing built-in extension XINERAMA
[ 37.499] (II) Initializing built-in extension XFIXES
[ 37.499] (II) Initializing built-in extension RENDER
[ 37.499] (II) Initializing built-in extension RANDR
[ 37.500] (II) Initializing built-in extension COMPOSITE
[ 37.500] (II) Initializing built-in extension DAMAGE
[ 37.503] (II) AIGLX: Screen 0 is not DRI2 capable
[ 37.503] (II) AIGLX: Screen 0 is not DRI capable
[ 37.531] (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
[ 37.531] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 37.531] (II) RADEON(0): Setting screen physical size to 444 x 277
[ 37.600] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 37.600] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.600] (II) LoadModule: "evdev"
[ 37.600] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 37.601] (II) Module evdev: vendor="X.Org Foundation"
[ 37.601] compiled for 1.9.1, module version = 2.5.0
[ 37.601] Module class: X.Org XInput Driver
[ 37.601] ABI class: X.Org XInput driver, version 11.0
[ 37.601] (**) Power Button: always reports core events
[ 37.601] (**) Power Button: Device: "/dev/input/event1"
[ 37.606] (--) Power Button: Found keys
[ 37.606] (II) Power Button: Configuring as keyboard
[ 37.606] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 37.606] (**) Option "xkb_rules" "evdev"
[ 37.606] (**) Option "xkb_model" "evdev"
[ 37.606] (**) Option "xkb_layout" "us"
[ 37.651] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 37.651] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.651] (**) Power Button: always reports core events
[ 37.651] (**) Power Button: Device: "/dev/input/event0"
[ 37.656] (--) Power Button: Found keys
[ 37.656] (II) Power Button: Configuring as keyboard
[ 37.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 37.656] (**) Option "xkb_rules" "evdev"
[ 37.656] (**) Option "xkb_model" "evdev"
[ 37.656] (**) Option "xkb_layout" "us"
[ 37.657] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 37.657] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 37.657] (**) Logitech USB Receiver: always reports core events
[ 37.657] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 37.668] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 37.668] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 37.668] (--) Logitech USB Receiver: Found relative axes
[ 37.668] (--) Logitech USB Receiver: Found x and y relative axes
[ 37.668] (II) Logitech USB Receiver: Configuring as mouse
[ 37.668] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 37.668] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.668] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 37.668] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 37.668] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 37.668] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 37.668] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 37.668] (II) Logitech USB Receiver: initialized for relative axes.
[ 37.668] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 37.668] (II) No input driver/identifier specified (ignoring)
[ 37.668] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 37.668] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 37.668] (**) Logitech USB Receiver: always reports core events
[ 37.668] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 37.676] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 37.676] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 37.676] (--) Logitech USB Receiver: Found relative axes
[ 37.676] (--) Logitech USB Receiver: Found absolute axes
[ 37.676] (--) Logitech USB Receiver: Found keys
[ 37.676] (II) Logitech USB Receiver: Configuring as mouse
[ 37.676] (II) Logitech USB Receiver: Configuring as keyboard
[ 37.676] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 37.676] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.676] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 37.676] (**) Option "xkb_rules" "evdev"
[ 37.676] (**) Option "xkb_model" "evdev"
[ 37.676] (**) Option "xkb_layout" "us"
[ 37.676] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 37.676] (II) Logitech USB Receiver: initialized for absolute axes.
[ 37.676] (II) config/udev: Adding input device HID 0566:3108 (/dev/input/event4)
[ 37.676] (**) HID 0566:3108: Applying InputClass "evdev keyboard catchall"
[ 37.676] (**) HID 0566:3108: always reports core events
[ 37.676] (**) HID 0566:3108: Device: "/dev/input/event4"
[ 37.684] (--) HID 0566:3108: Found keys
[ 37.684] (II) HID 0566:3108: Configuring as keyboard
[ 37.684] (II) XINPUT: Adding extended input device "HID 0566:3108" (type: KEYBOARD)
[ 37.684] (**) Option "xkb_rules" "evdev"
[ 37.684] (**) Option "xkb_model" "evdev"
[ 37.684] (**) Option "xkb_layout" "us"
[ 37.684] (II) config/udev: Adding input device HID 0566:3108 (/dev/input/event5)
[ 37.684] (**) HID 0566:3108: Applying InputClass "evdev keyboard catchall"
[ 37.684] (**) HID 0566:3108: always reports core events
[ 37.684] (**) HID 0566:3108: Device: "/dev/input/event5"
[ 37.692] (--) HID 0566:3108: Found 1 mouse buttons
[ 37.692] (--) HID 0566:3108: Found scroll wheel(s)
[ 37.692] (--) HID 0566:3108: Found relative axes
[ 37.692] (--) HID 0566:3108: Found absolute axes
[ 37.692] (--) HID 0566:3108: Found keys
[ 37.692] (II) HID 0566:3108: Configuring as mouse
[ 37.692] (II) HID 0566:3108: Configuring as keyboard
[ 37.692] (**) HID 0566:3108: YAxisMapping: buttons 4 and 5
[ 37.692] (**) HID 0566:3108: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.692] (II) XINPUT: Adding extended input device "HID 0566:3108" (type: KEYBOARD)
[ 37.692] (**) Option "xkb_rules" "evdev"
[ 37.692] (**) Option "xkb_model" "evdev"
[ 37.692] (**) Option "xkb_layout" "us"
[ 37.692] (EE) HID 0566:3108: failed to initialize for relative axes.
[ 37.692] (II) HID 0566:3108: initialized for absolute axes.
[ 37.692] (II) config/udev: Adding input device Elan USB Audio (/dev/input/event6)
[ 37.692] (**) Elan USB Audio: Applying InputClass "evdev keyboard catchall"
[ 37.692] (**) Elan USB Audio: always reports core events
[ 37.692] (**) Elan USB Audio: Device: "/dev/input/event6"
[ 37.700] (--) Elan USB Audio: Found keys
[ 37.700] (II) Elan USB Audio: Configuring as keyboard
[ 37.700] (II) XINPUT: Adding extended input device "Elan USB Audio" (type: KEYBOARD)
[ 37.700] (**) Option "xkb_rules" "evdev"
[ 37.700] (**) Option "xkb_model" "evdev"
[ 37.700] (**) Option "xkb_layout" "us"
[ 83.039] RADEONDPEncoderService: 1 19
[ 83.039] failed to get auxch 0030 40 30 02 after 0 retries
[ 83.040] failed to get auxch 0031 40 30 02 after 0 retries
[ 83.040] failed to get auxch 0037 40 30 02 after 0 retries
[ 83.040] failed to get auxch 0050 40 30 02 after 0 retries
[ 83.041] failed to get auxch 0050 40 30 02 after 0 retries
[ 83.041] failed to get auxch 0050 40 30 02 after 0 retries
[ 83.041] failed to get auxch 0050 40 30 02 after 0 retries
[ 83.044] (II) RADEON(0): Output: DisplayPort-0, Detected Monitor Type: 0
[ 83.049] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[ 83.105] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[ 83.105] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[ 83.105] (II) RADEON(0): Manufacturer: DEL Model: f011 Serial#: 810373708
[ 83.105] (II) RADEON(0): Year: 2009 Week: 15
[ 83.105] (II) RADEON(0): EDID Version: 1.3
[ 83.105] (II) RADEON(0): Digital Display Input
[ 83.105] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 83.105] (II) RADEON(0): Gamma: 2.20
[ 83.105] (II) RADEON(0): DPMS capabilities: Off
[ 83.105] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 83.105] (II) RADEON(0): Default color space is primary color space
[ 83.105] (II) RADEON(0): First detailed timing is preferred mode
[ 83.105] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 83.105] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 83.105] (II) RADEON(0): Supported established timings:
[ 83.105] (II) RADEON(0): 720x400@70Hz
[ 83.105] (II) RADEON(0): 640x480@60Hz
[ 83.105] (II) RADEON(0): 640x480@75Hz
[ 83.105] (II) RADEON(0): 800x600@60Hz
[ 83.105] (II) RADEON(0): 800x600@75Hz
[ 83.105] (II) RADEON(0): 1024x768@60Hz
[ 83.105] (II) RADEON(0): 1024x768@75Hz
[ 83.105] (II) RADEON(0): 1280x1024@75Hz
[ 83.105] (II) RADEON(0): Manufacturer's mask: 0
[ 83.105] (II) RADEON(0): Supported standard timings:
[ 83.105] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 83.105] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 83.105] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 83.105] (II) RADEON(0): Supported detailed timing:
[ 83.105] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 83.105] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 83.105] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 83.105] (II) RADEON(0): Serial No: H736H94B0MRL
[ 83.105] (II) RADEON(0): Monitor name: DELL 2209WA
[ 83.105] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 83.105] (II) RADEON(0): EDID (in hex):
[ 83.105] (II) RADEON(0): 00ffffffffffff0010ac11f04c524d30
[ 83.105] (II) RADEON(0): 0f130103802f1e782eee95a3544c9926
[ 83.105] (II) RADEON(0): 0f5054a54b00714f8180b30001010101
[ 83.105] (II) RADEON(0): 01010101010121399030621a274068b0
[ 83.105] (II) RADEON(0): 3600da281100001c000000ff00483733
[ 83.105] (II) RADEON(0): 3648393442304d524c0a000000fc0044
[ 83.105] (II) RADEON(0): 454c4c203232303957410a20000000fd
[ 83.105] (II) RADEON(0): 00384b1e5310000a20202020202000db
|
|
|
| Back to top |
|
|
Slippery Jim
Apprentice
Joined: 08 Jan 2005
Posts: 264
|
| Posted: Fri Oct 29, 2010 6:07 am Post subject: |
|
|
| DaggyStyle wrote: |
strange, why it needs that?
my mesa ebuild doesn't need libX11. |
My understanding is that it's for indirect rendering; The openGL commands get encapsulated in the X protocol stream via xlib, and sent over the network to the X server. AFAIUI. |
|
| Back to top |
|
|
reasons
n00b
Joined: 26 Mar 2009
Posts: 62
|
| Posted: Fri Oct 29, 2010 7:15 pm Post subject: |
|
|
| To everyone who might be having troubles, read through the radeon wiki just one more time. I skipped over the firmware setup . Feels good to have both my monitors working now. I can't describe how hard it was for me to get school work done with only one when you're so used to having spec files and pdfs open on the second for reference. |
|
| Back to top |
|
|
Tariella
Guru
Joined: 10 Dec 2005
Posts: 384
Location: Europe/Austria
|
| Posted: Sun Oct 31, 2010 1:34 pm Post subject: |
|
|
I finally got the newest ati drivers emerged and changed mesa from classic to gallium3d.
First observations:
Compiz is able to run in gallium3d now.
Xbmc start gives one error and it takes a long time to load but it seems to work so far.
Now I'll just have to find a MPEG2 encoded file to check XvMC. Most of my files are x264 encoded.
Edit:
XvMC seems to work fine. Uptime between 0.04 and 0.08 with fullscreen mplayer playing mpeg2 video from DVD.  |
|
| Back to top |
|
|
Slippery Jim
Apprentice
Joined: 08 Jan 2005
Posts: 264
|
| Posted: Tue Nov 16, 2010 6:15 am Post subject: kernel error |
|
|
Okay, been trying to set up a kms framebuffer on my new netbook. It's got a mobile radeon 4225 chip in it. Not having much luck. I followed the framebuffer and radeon wikis, but I'm getting errors in dmesg about the DRM not being able to find the BIOS. Also tried passing video=1366x768 on the kernel command line. All I get is the standard vga console. I'll attach my kernel config and dmesg output, in case anyone wants to look and see if they can spot what I'm doing wrong.
uname -a:
| Code: |
Linux Tachyon 2.6.34-gentoo-r12-gallium #3 PREEMPT Mon Nov 15 22:28:27 MST 2010 x86_64 AMD Athlon(tm) II Neo K125 Processor AuthenticAMD GNU/Linux
|
lspci:
| Code: |
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc Device 9712
01:05.1 Audio device: ATI Technologies Inc Device 970f
03:00.0 Ethernet controller: Attansic Technology Corp. Device 1073 (rev c0)
06:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
|
dmesg:
| Code: |
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9712).
[drm] register mmio base: 0xD0100000
[drm] register mmio size: 65536
radeon 0000:01:05.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)
[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
radeon 0000:01:05.0: Fatal error during GPU init
[drm] radeon: finishing device.
[drm] Disabling audio support
radeon 0000:01:05.0: PCI INT A disabled
radeon: probe of 0000:01:05.0 failed with error -22
|
kernel config:
| Code: |
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/udevadm"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin radeon/R700_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FB_CON_DECOR is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
|
|
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Tue Nov 16, 2010 6:36 am Post subject: |
|
|
update your lspci database, kernel to 2.6.36 and try again. and make sure you use mesa, libdrm and xf86-video-ati from git (9999 versions)
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
Slippery Jim
Apprentice
Joined: 08 Jan 2005
Posts: 264
|
| Posted: Tue Nov 16, 2010 4:27 pm Post subject: |
|
|
| DaggyStyle wrote: | | update your lspci database, kernel to 2.6.36 and try again. and make sure you use mesa, libdrm and xf86-video-ati from git (9999 versions) |
Updated the database and the kernel to 36. Holding off on the rest until I get the console working. I was really hoping that the kernel update would do the trick, but alas, no go. Same dmesg error.
Just to make sure I get it: The radeon framebuffer driver (CONFIG_FB_RADEON) is for UMS, and should NOT be enabled, right? Instead I should ONLY enable the radeon/KMS stuff under the DRM option, correct?
I haven't been able to find an ebuild for the kernel drm modules, except the nouveau stuff for nvidia. Anyone maintaining one for the KMS/radeon stuff? |
|
| Back to top |
|
|
pingufunkybeat
l33t
Joined: 01 Dec 2004
Posts: 610
|
| Posted: Tue Nov 16, 2010 5:16 pm Post subject: |
|
|
| The kernel modules are in the kernel tree now, not separate. |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Tue Nov 16, 2010 6:16 pm Post subject: |
|
|
| Slippery Jim wrote: | | DaggyStyle wrote: | | update your lspci database, kernel to 2.6.36 and try again. and make sure you use mesa, libdrm and xf86-video-ati from git (9999 versions) |
Updated the database and the kernel to 36. Holding off on the rest until I get the console working. I was really hoping that the kernel update would do the trick, but alas, no go. Same dmesg error.
Just to make sure I get it: The radeon framebuffer driver (CONFIG_FB_RADEON) is for UMS, and should NOT be enabled, right? Instead I should ONLY enable the radeon/KMS stuff under the DRM option, correct?
I haven't been able to find an ebuild for the kernel drm modules, except the nouveau stuff for nvidia. Anyone maintaining one for the KMS/radeon stuff? |
yes.
use this as reference http://en.gentoo-wiki.com/wiki/Radeon
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
Slippery Jim
Apprentice
Joined: 08 Jan 2005
Posts: 264
|
| Posted: Wed Nov 17, 2010 7:22 am Post subject: success |
|
|
Okay, I got the framebuffer working, with some help from #dri-devel on irc. I had to enable CONFIG_PCI_QUIRKS in the kernel. Once I did that, the framebuffer console popped right up. I have direct rendering via gallium on r600 now too.
In case anyone else is having similar problems and searching the forums, my system is a gateway LT3201h, with a Mobility Radeon 4225 integrated video chip.
Thanks for the replies Dag. I didn't know how to update the lspci database before. |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5909
|
| Posted: Mon Nov 22, 2010 8:49 pm Post subject: |
|
|
does anyone uses XvMC With iDCT?
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
