Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Problemi con l'installazione di Xorg
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
super_matrix
n00b
n00b


Joined: 05 Jun 2009
Posts: 4

PostPosted: Fri Jun 05, 2009 9:57 pm    Post subject: Problemi con l'installazione di Xorg Reply with quote

Salve a ragazzi... non riesco ad installare xorg sul mio notebbok HP NX6110; sto seguendo questa guida.

L'errore che ottengo quando lancio X -configure è:
Code:
Gentoo_NX6110 / # X -configure

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-gentoo-r5 i686
Current Operating System: Linux Gentoo_NX6110 2.6.28-gentoo-r5 #1 SMP Thu May 28 00:28:59 CEST 2009 i686
Build Date: 05 June 2009  11:31:44PM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  5 23:57:16 2009
Missing output drivers.  Configuration failed.


mentre questo è il mio make.conf:
Code:
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium-m -mtune=pentium-m -m32 -mfpmath=sse -O3 -fomit-frame-pointer -ftracer -fforce-addr -pipe -mno-3dnow -mmmx -msse -msse2 -mno-sse3"
CXXFLAGS="${CFLAGS} -fvisibility-inlines-hidden"
LDFLAGS="-Wl,-O1,--enable-new-dtags,--sort-common,-s"
ACCEPT_KEYWORDS="x86"
LANG="it_IT.utf8@euro"
LC_COLLATE="C"
LINGUAS="it en"
PORTAGE_TMPDIR=/var/tmp
PORTDIR=/usr/portage
DISTDIR=${PORTDIR}/distfiles
PKGDIR=${PORTDIR}/packages
PORTAGE_RSYNC_RETRIES="3"
GENTOO_MIRRORS="http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ "
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
RSYNC_EXCLUDEFROM="/etc/portage/rsync_excludes"
MAKEOPTS="-j2"
AUTOCLEAN="yes"
FEATURES="sandbox"
VIDEO_CARDS="i810"
ALSA_CARDS="intel8x0"
INPUT_DEVICES="keyboard mouse synaptics"


con emerge -pvD xorg-server ottengo:
Code:
Gentoo_NX6110 / # emerge -pvD xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N    ] virtual/acl-0  0 kB
[ebuild   R   ] x11-base/xorg-server-1.5.3-r6  USE="hal ipv6 nptl sdl xorg -3dfx -debug -dmx -kdrive -minimal -tslib" INPUT_DEVICES="keyboard mouse synaptics -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -tek4957 -tslib -ur98 -virtualbox -vmmouse -void -wacom" VIDEO_CARDS="-apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -via -virtualbox -vmware -voodoo -xgi" 0 kB

Total: 2 packages (1 new, 1 reinstall), Size of downloads: 0 kB


e infine con emerge portage-utils; qlist -I -C x11-drivers/ ottengo:
Code:
....
 * GNU info directory index is up-to-date.
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-input-synaptics


e manca la scheda Video.... perché !!!!!!!!!!!!!
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4657
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Sat Jun 06, 2009 4:59 am    Post subject: Re: Problemi con l'installazione di Xorg Reply with quote

super_matrix wrote:

VIDEO_CARDS="-apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -via -virtualbox -vmware -voodoo -xgi"
...
e manca la scheda Video.... perché !!!!!!!!!!!!!

in effetti, sembra che tu non abbia scelto alcuna scheda video.
fai attenzione a tenere d'occhio, oltre alla guida che hai già indicato, anche questa.
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
super_matrix
n00b
n00b


Joined: 05 Jun 2009
Posts: 4

PostPosted: Sat Jun 06, 2009 9:52 pm    Post subject: Reply with quote

Trovato l'errore, nel make.conf c'era
Code:
VIDEO_CARDS="i810"

mentre ora con
Code:
VIDEO_CARDS="intel"


sono ad un passo successivo...ma ho sempre un errore: quando eseguo X -config /root/xorg.conf.new ottengo questo msg di errore e non so come muovermi:
Code:
Gentoo_NX6110 ~ # X -config /root/xorg.conf.new

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-gentoo-r5 i686
Current Operating System: Linux Gentoo_NX6110 2.6.28-gentoo-r5 #1 SMP Thu May 28 00:28:59 CEST 2009 i686
Build Date: 06 June 2009  12:08:42AM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun  6 23:50:41 2009
(++) Using config file: "/root/xorg.conf.new"
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
FATAL: Module i915 not found.
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(EE) intel(0): Couldn't allocate video memory

Fatal server error:
AddScreen/ScreenInit failed for driver 0


In cosa sbaglio ????
Back to top
View user's profile Send private message
Peach
Advocate
Advocate


Joined: 08 Mar 2003
Posts: 3686
Location: London, UK

PostPosted: Sat Jun 06, 2009 10:02 pm    Post subject: Reply with quote

super_matrix wrote:
Code:
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
FATAL: Module i915 not found.


sembra ti manchi il supporto per il l'agp del tuo chipset.
controlla di avere abilitato i moduli necessari nel kernel
(se hai già controllato o se ti servono più info domanda pure)
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom
Back to top
View user's profile Send private message
!equilibrium
Bodhisattva
Bodhisattva


Joined: 06 Jun 2004
Posts: 2109
Location: MI/BG/LC

PostPosted: Sun Jun 07, 2009 6:22 am    Post subject: Reply with quote

Gentoo DRI Guide
_________________
Arch Tester for Gentoo/FreeBSD
Equilibrium's Universe

all my contents are released under the Creative Commons Licence by-nc-nd 2.5
Back to top
View user's profile Send private message
super_matrix
n00b
n00b


Joined: 05 Jun 2009
Posts: 4

PostPosted: Sun Jun 07, 2009 9:00 am    Post subject: Reply with quote

Ho effettuato un lspci e questo è il risultato:

Code:
Gentoo_NX6110 ~ # lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)


mentre il kernel l'ho compilato alla fine con genkernel... ogni volta che provavo a fare le configurazioni "a mano" non mi partiva nulla :(
Back to top
View user's profile Send private message
Peach
Advocate
Advocate


Joined: 08 Mar 2003
Posts: 3686
Location: London, UK

PostPosted: Sun Jun 07, 2009 12:35 pm    Post subject: Reply with quote

bene
l'idea di genkernel è quella di avere una base funzionante e poi effettuare gli aggiustamenti a manina
io direi che potresti partire seguendo il suggerimento di equi e seguire la guida a DRI (anche in italiano)
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum