| View previous topic :: View next topic |
| Author |
Message |
Starik
Apprentice
Joined: 08 Oct 2003
Posts: 168
Location: Munich
|
 Posted: Thu Jun 04, 2009 4:41 pm Post subject: Mathematica crashes using Xorg. 1.5.3-r6 |
 |
|
Hi guys,
sometimes I'm using Mathematica for some purpose. I've still an older version installed (v6).
Since an update to Xorg-server 1.5.3-r6 Mathematica crashes.
Here my console output when i'm starting Mathematica (this comes several times with different numbers):
| Quote: |
X Error of failed request: RenderBadPicture (invalid Picture parameter)
Major opcode of failed request: 154 (RENDER)
Minor opcode of failed request: 7 (RenderFreePicture)
Picture id in failed request: 0x2c00526
Serial number of failed request: 6638
Current serial number in output stream: 6639
|
When I want to tip something in Mathematica's surface the cursor is moving but the letters are not seen. When I'm clicking on some buttons (i.e. Help) the x-server crashes and I will get an new kdm-login.
Mathematica-fonts are not installed:
I'm not quite sure which log file would be appropriate to show the behaviour of the x system...
| Quote: |
elenor dennis # cat /var/log/Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-gentoo-r5 i686
Current Operating System: Linux elenor 2.6.28-gentoo-r5 #6 SMP Tue May 5 02:11:55 CEST 2009 i686
Build Date: 26 May 2009 10:34:19PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 4 18:30:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 15 of section Files in file /etc/X11/xorg.conf
Ignoring obsolete keyword "RgbPath".
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x9e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 2
(--) PCI:*(0@1:0:0) nVidia Corporation G72M [GeForce Go 7400] rev 161, Mem @ 0xd1000000/0, 0xb0000000/0, 0xd0000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "NvAGP" "1"
(**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0,CRT-0"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "TwinViewOrientation" "LeftOf"
(**) NVIDIA(0): Option "SecondMonitorHorizSync" "30-80"
(**) NVIDIA(0): Option "SecondMonitorVertRefresh" "60-75"
(**) NVIDIA(0): Option "MetaModes" "CRT: 1280x1024 +1280+0, DFP: 1280x800 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "false"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "UseEvents" "false"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): ConnectedMonitor string: "DFP-0,CRT-0"
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
(WW) NVIDIA(0): Support for GLX with the Damage and Composite X extensions has
(WW) NVIDIA(0): been disabled because the "AllowGLXWithComposite" option
(WW) NVIDIA(0): was set to FALSE. The GLX extension will be disabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 7400 (G72) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.72.22.36.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 7400 at PCI:1:0:0:
(--) NVIDIA(0): Acer AL732 (CRT-0)
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
(--) NVIDIA(0): Acer AL732 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 330.0 MHz maximum pixel
(--) NVIDIA(0): clock
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0
(WW) NVIDIA(0): The EDID for Acer AL732 (CRT-0) contradicts itself: mode
(WW) NVIDIA(0): "800x600" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (60.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (56.2 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "800x600".
(II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:1280x1024+1280+0,DFP:1280x800+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:1280x1024+1280+0,DFP:1280x800+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) GLX is not supported with the Composite extension on this X server
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) SynPS/2 Synaptics TouchPad: always reports core events
(**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
(II) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
(II) SynPS/2 Synaptics TouchPad: Found absolute touchpad
(II) SynPS/2 Synaptics TouchPad: Configuring as mouse
(**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
(**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Microsoft Basic Optical Mouse
(**) Microsoft Basic Optical Mouse: always reports core events
(**) Microsoft Basic Optical Mouse: Device: "/dev/input/event6"
(II) Microsoft Basic Optical Mouse: Found 3 mouse buttons
(II) Microsoft Basic Optical Mouse: Found x and y relative axes
(II) Microsoft Basic Optical Mouse: Configuring as mouse
(**) Microsoft Basic Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Microsoft Basic Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Basic Optical Mouse" (type: MOUSE)
|
So far. Thank you very any answer
_________________
Pain is weakness leaving the body |
|
| Back to top |
|
 |
furanku
l33t
Joined: 08 May 2003
Posts: 905
Location: Hamburg, Germany
|
| Posted: Fri Jun 05, 2009 11:27 am Post subject: |
|
|
Just a shot from the hip: Try from a console
| Code: |
$ XLIB_SKIP_ARGB_VISUALS=1 Mathematica
|
|
|
| Back to top |
|
|
Starik
Apprentice
Joined: 08 Oct 2003
Posts: 168
Location: Munich
|
| Posted: Fri Jun 05, 2009 2:59 pm Post subject: |
|
|
Thank you, but it did not help
| Code: |
elenor dennis # XLIB_SKIP_ARGB_VISUALS=1 Mathematica
bash: Mathematica: command not found
elenor dennis # XLIB_SKIP_ARGB_VISUALS=1 mathematica
bash: mathematica: command not found
|
_________________
Pain is weakness leaving the body |
|
| Back to top |
|
|
furanku
l33t
Joined: 08 May 2003
Posts: 905
Location: Hamburg, Germany
|
| Posted: Fri Jun 05, 2009 3:04 pm Post subject: |
|
|
OK, that doesn't mean that the trick with the ARGB visuals didn't work, but that the Mathematica shell script isn't in your path.
How do you start Mathematica normally? Do you know to which directory it is installed? |
|
| Back to top |
|
|
Starik
Apprentice
Joined: 08 Oct 2003
Posts: 168
Location: Munich
|
| Posted: Fri Jun 05, 2009 10:13 pm Post subject: |
|
|
In generally I'm starting mathematica via some console (simply typing mathematica).
Yeah, it is installed in /usr/local/Wolfram/Mathematica/6.0
Ok if I'm typping XLIB_SKIP_ARGB_VISUALS=1 /usr/local/Wolfram/Mathematica/6.0/Executables/mathematica there is no error messages and a window is popping up which forces me to (re-) enter my mathematica licence.
Thanks a lot for your help.
_________________
Pain is weakness leaving the body |
|
| Back to top |
|
|
furanku
l33t
Joined: 08 May 2003
Posts: 905
Location: Hamburg, Germany
|
| Posted: Fri Jun 05, 2009 11:05 pm Post subject: |
|
|
Hmmm ... I'm a bit surprised that you have to re-enter your license key. Is it possible that you have more then one version of Mathematica installed or the same version installed to different directories? Do you use a license server?
Anyway ... did setting XLIB_SKIP_ARGB_VISUALS=1 solve your first problem of X crashing and Mathematica rendering an unusable window? |
|
| Back to top |
|
|
Starik
Apprentice
Joined: 08 Oct 2003
Posts: 168
Location: Munich
|
| Posted: Sat Jun 06, 2009 10:08 am Post subject: |
|
|
No I couldn't try because I have to wait till Monday to obtain the licence (at work)...
But this computer is a single licence, no licence server, no other Mathematica version installed..
Thank you very much!!!
_________________
Pain is weakness leaving the body |
|
| Back to top |
|
|
furanku
l33t
Joined: 08 May 2003
Posts: 905
Location: Hamburg, Germany
|
| Posted: Sat Jun 06, 2009 5:19 pm Post subject: |
|
|
No need to thank me, until you know if I the trick disabling the ARGB visuals really helped you 
Please tell me how it worked out, because I'm really surprised to see that you have to re-license Mathematica. I can't think of any valid reason why setting an X related environment variable could cause this. |
|
| Back to top |
|
|
Starik
Apprentice
Joined: 08 Oct 2003
Posts: 168
Location: Munich
|
| Posted: Sun Jun 07, 2009 10:10 pm Post subject: |
|
|
Oh shit sorry, it was my fault.
I did it as admin, as user it works without any problems.
But what is this line actually doing?
_________________
Pain is weakness leaving the body |
|
| Back to top |
|
|
furanku
l33t
Joined: 08 May 2003
Posts: 905
Location: Hamburg, Germany
|
| Posted: Mon Jun 08, 2009 5:24 pm Post subject: |
|
|
Fine, good to hear that it solved your problem!
For the meaning of this environment variable see here, section 5.3. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
