| View previous topic :: View next topic |
| Author |
Message |
TheHood
n00b
Joined: 01 Jul 2007
Posts: 44
|
 Posted: Mon Apr 20, 2009 9:51 pm Post subject: KDE Automount CD Not Working [solved] |
 |
|
Hi,
I'm having problems getting KDE to automount my CD drive. Everything works fine using:
# mount /dev/cdrw1 -t iso9660 -r /mnt/cdrom
as root (but not otherwise).
KDE also has no problems automounting usb drives.
However, if I load a CD, it detects the new CD, and it appears in media:/ but then I get the following:
mount: wrong fs type, bad option, bad superblock on /dev/hdd, missing codepage or helper program, or other error.
Here is my /etc/fstab
| Code: |
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda2 /boot ext2 noauto,noatime 1 2
/dev/hda4 / ext3 noatime 0 1
/dev/hda3 none swap sw 0 0
/dev/hda1 /mnt/win auto noatime,users,gid=100,umask=007 0 0
/dev/cdrw1 /mnt/cdrom iso9660 auto,users,gid=100,umask=007 0 0
/dev/sda1 /mnt/auto auto auto,users,gid=100,umask=007 0 0
/dev/sdb1 /mnt/usb2 auto auto,users,gid=100,umask=007 0 0
/dev/fd0 /mnt/floppy auto auto,users,gid=100,umask=007 0 0
/dev/hdc /mnt/dvd auto auto,users,gid=100,umask=007 0 0
/dev/hdd /mnt/cdrom iso9660 auto,users,gid=100,umask=007 0 0
# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
|
Can anyone spot what I am doing wrong?
Many thanks
Last edited by TheHood on Sat Apr 25, 2009 9:14 am; edited 1 time in total |
|
| Back to top |
|
 |
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Tue Apr 21, 2009 7:07 am Post subject: Re: KDE Automount CD Not Working |
|
|
| TheHood wrote: | | Code: |
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda2 /boot ext2 noauto,noatime 1 2
/dev/hda4 / ext3 noatime 0 1
/dev/hda3 none swap sw 0 0
/dev/hda1 /mnt/win auto noatime,users,gid=100,umask=007 0 0
/dev/cdrw1 /mnt/cdrom iso9660 auto,users,gid=100,umask=007 0 0 <--PROBLEM
/dev/sda1 /mnt/auto auto auto,users,gid=100,umask=007 0 0
/dev/sdb1 /mnt/usb2 auto auto,users,gid=100,umask=007 0 0 <--PROBLEM
/dev/fd0 /mnt/floppy auto auto,users,gid=100,umask=007 0 0 <--PROBLEM
/dev/hdc /mnt/dvd auto auto,users,gid=100,umask=007 0 0 <--PROBLEM
/dev/hdd /mnt/cdrom iso9660 auto,users,gid=100,umask=007 0 0 <-PROBLEM
|
Can anyone spot what I am doing wrong?
Many thanks |
If you want automount, you cannot invoke optical or USB drives in /etc/fstab. You have to set up hal/dbus properly, (emerge -av hal dbus && rc-updatge add hald default && rec-update dbus default). Then add your user name to the cdrom cdrw disk plugdev and usb groups in /etc/group. This also applies to the floppy drive as well. Hal/dbus operating properly will autodetect pretty much anything you can stick in a computer.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
MaximeG
l33t
Joined: 15 Apr 2008
Posts: 722
Location: Belgium
|
| Posted: Tue Apr 21, 2009 1:09 pm Post subject: |
|
|
Yes,
You need to install hal (and kde support for hal as well as probably other dependencies.)
Last time I checked the gentoo installation guide was all right to get it up and running.
Regards,
Maxime
_________________
Future is wide open. |
|
| Back to top |
|
|
TheHood
n00b
Joined: 01 Jul 2007
Posts: 44
|
| Posted: Fri Apr 24, 2009 6:23 pm Post subject: |
|
|
Thanks,
I already had hald and dbus installed. I noticed not all the right users were in the relevant groups, so I changed that, but it still comes up with the same error message when trying to automount CDs (I think KDE can spot it, it appears in media:/ but when you click on the icon to mount it, it complains). Is this still a permissions problem? Here's my /etc/group - the two users that need to use KDE automount are james and rachel.
| Code: |
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin,adm
adm:x:4:root,adm,daemon
tty:x:5:
disk:x:6:root,adm,haldaemon,james,rachel
lp:x:7:lp
mem:x:8:
kmem:x:9:
wheel:x:10:root,james,rachel
floppy:x:11:root,james,haldaemon,rachel
mail:x:12:mail,postfix
news:x:13:news
uucp:x:14:uucp
man:x:15:man
console:x:17:
audio:x:18:james,rachel
cdrom:x:19:james,haldaemon,rachel
dialout:x:20:root
tape:x:26:root
video:x:27:root,james,rachel
cdrw:x:80:haldaemon,james,rachel
usb:x:85:james,haldaemon,rachel
users:x:100:games,james,rachel
nofiles:x:200:
smmsp:x:209:smmsp
portage:x:250:portage
utmp:x:406:
nogroup:x:65533:
nobody:x:65534:
ldap:x:439:
sshd:x:22:
cron:x:16:
locate:x:245:
james:x:1000:
mysql:x:60:
apache:x:81:
ntp:x:123:
lpadmin:x:106:
messagebus:x:1001:
crontab:x:1002:
postfix:x:207:
postdrop:x:208:
scanner:x:1003:
haldaemon:x:1004:haldaemon
plugdev:x:1005:haldaemon,rachel,james
rachel:x:1006:
games:x:35:james
|
Thanks again |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Fri Apr 24, 2009 7:30 pm Post subject: |
|
|
Did you remove its invocation from /etc/fstab?
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
TheHood
n00b
Joined: 01 Jul 2007
Posts: 44
|
| Posted: Sat Apr 25, 2009 9:14 am Post subject: |
|
|
| No. Removing that did the trick. Thanks!! |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Sat Apr 25, 2009 6:56 pm Post subject: |
|
|
You're welcome.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
pfloydde
n00b
Joined: 26 Sep 2007
Posts: 5
|
| Posted: Mon Apr 27, 2009 9:56 pm Post subject: Same Problem here and not solved |
|
|
Hello,
I have the same Problem with a little different config. I have one SATA CDRW and one old IDE CDRW.
| Code: | Apr 1 04:09:11 ion scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A104 PQ: 0 ANSI: 5
Apr 1 04:09:11 ion sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Apr 1 04:09:11 ion sr 0:0:0:0: Attached scsi CD-ROM sr0
...
Apr 1 04:09:11 ion hdc: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
Apr 1 04:09:11 ion hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr 1 04:09:11 ion hdc: UDMA/66 mode selected |
The sr0 automount without problems. All is ok. But the hdc-Device say "Only root can mount".
There is no Entry in my /etc/fstab for both devices.
I tried to comment the Entry for HL-DT-ST.... out in | Code: | | /usr/share/hal/fdi/preprobe/10osvendor/10-ide-drives.fdi |
without effect.
Any idea what's wrong?
_________________
Man trägt wieder Hirn!!! |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Mon Apr 27, 2009 10:44 pm Post subject: |
|
|
Start by posting the results of emerge --info. Then post /etc/group, and all of /var/log/dmesg.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
pfloydde
n00b
Joined: 26 Sep 2007
Posts: 5
|
| Posted: Tue Apr 28, 2009 4:50 am Post subject: |
|
|
Oh, ok.
Here is emerge --info:
| Code: | Portage 2.1.6.11 (default/linux/amd64/2008.0/desktop, gcc-4.1.2, glibc-2.9_p20081201-r2, 2.6.28-gentoo-r4 x86_64)
=================================================================
System uname: Linux-2.6.28-gentoo-r4-x86_64-AMD_Athlon-tm-_64_X2_Dual_Core_Processor_4200+-with-gentoo-2.0.0
Timestamp of tree: Tue, 28 Apr 2009 04:30:01 +0000
ccache version 2.4 [enabled]
app-shells/bash: 4.0_p17-r1
dev-java/java-config: 2.1.7
dev-lang/python: 2.4.4-r13, 2.5.4-r2, 2.6.2
dev-python/pycrypto: 2.0.1-r8
dev-util/ccache: 2.4-r8
dev-util/cmake: 2.6.3-r1
sys-apps/baselayout: 2.0.0
sys-apps/openrc: 0.4.3-r2
sys-apps/sandbox: 1.9
sys-devel/autoconf: 2.13, 2.63-r1
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.19.1-r1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6a
virtual/os-headers: 2.6.28-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-march=k8 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo ftp://mirror.leaseweb.com/gentoo/ http://gentoo.mneisen.org/ ftp://mirror.cambrium.nl/pub/os/linux/gentoo/ http://mirror.cambrium.nl/pub/os/linux/gentoo/"
LANG="de_DE.UTF-8"
LC_ALL="de_DE.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="de"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage/myoverlay"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="32bit 7zip X Xaw3d a52 aac aalib ace acl acpi additions aften alsa amarok amarok2 amazon amd64 amrwb animgif ao archive aspell async asyncns atmo audacious audiofile automount avahi bash-completion beagle berkdb binary binary-drivers bluetooth branding brasero bzip2 cairo cdda cddax cddb cdio cdparanoia cdr cdrkit cdrom cdrtools chm cli consolekit corefonts cover cpudetection cracklib crypt css cups cupsddk curl curlwrappers cursors custom-optimization cvs cvsgraph dbus deskbar dia dirac disk-partition divx dri dv dvd dvdr dvdread dxr3 eds emacs emboss emerald encode esd evo exif extra extrafilters faac faad fam fame fat fax fbcondecor fbsplash festival ffmpeg firefox firefox3 flac flash fluidsynth foomaticdb fortran ftp games gcdmaster gd gdbm gif gimp glitz gnome gnome-keyring gnome-print gnomecanvas gnomecd gphoto2 gpm grub gs gsf gstreamer gtk gtkhotkey gzip hal hddtemp icecast iconv id3 id3tag imagemagick ipv6 isdnlog jabber java joystick jpeg jpeg2k kpathsea lame latex ldap libnotify lyrics lzo mad md5sum mdnsresponder-compat midi mikmod mjpeg mmx mmxext mp3 mpd mpeg mpeg2 mplayer mtp mudflap mule multilib musepack music musicbrainz nas nautilus ncurses nforce2 nfs nls nptl nptlonly nsplugin nvidia nvtv odbc ogg ogg123 openal opengl openmp pam pango parport pcre pdf perl php png pnm pop postgres postproc postscript povray ppds pppd psf pstricks publishers pulseaudio pvr python qt3 qt3support quicktime radio rar raw readline realmedia recode reflection rss samba savedconfig scanner schroedinger sdl session slp snmp speex spell spl sqlite sse sse2 ssl startup-notification subtitles svg sysfs taglib tcpd theora threads tiff transcode truetype unicode unsupported usb v4l v4l2 vcd vim vim-syntax vorbis vte wav wavpack x264 xcb xim xine xinerama xml xorg xpm xulrunner xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="canon" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="de" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS |
And /etc/group
| Code: | root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin,adm
adm:x:4:root,adm,daemon,myuser
tty:x:5:
disk:x:6:root,adm,haldaemon,myuser
lp:x:7:lp,myuser,root
mem:x:8:
kmem:x:9:
wheel:x:10:root,myuser
floppy:x:11:root,myuser,haldaemon
mail:x:12:mail,postfix
news:x:13:news
uucp:x:14:uucp
man:x:15:man
console:x:17:
audio:x:18:myuser,pulse
cdrom:x:19:root,myuser,haldaemon
dialout:x:20:root
tape:x:26:root
video:x:27:root,myuser
cdrw:x:80:haldaemon,myuser,root
usb:x:85:myuser,haldaemon
users:x:100:games,myuser
nofiles:x:200:
smmsp:x:209:smmsp
portage:x:250:portage,myuser
utmp:x:406:
nogroup:x:65533:
nobody:x:65534:
sshd:x:22:
cron:x:16:
ssmtp:x:407:
crontab:x:408:
locate:x:245:
ldap:x:439:
myuser:x:1000:
messagebus:x:1001:
netdev:x:1002:
avahi:x:1003:
haldaemon:x:1004:haldaemon,myuser,root
plugdev:x:1005:haldaemon,myuser,root
lpadmin:x:106:myuser,root
realtime:x:1006:
pulse-access:x:1007:
pulse:x:1008:
gdm:x:1009:
sabayon-admin:x:1010:
games:x:35:myuser
ntp:x:123:
postfix:x:207:
postdrop:x:208:
tcpdump:x:1011:
scanner:x:1012:myuser
vboxusers:x:1013:root,myuser
ntop:x:1014:
polkituser:x:1015: |
dmesg:
| Code: | nabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 39876480 512-byte hardware sectors: (20.4 GB/19.0 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sda] Attached SCSI disk
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3400620AS, 3.AAD, max UDMA/133
ata3.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2456]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.02.01-k9
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex. All rights reserved.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-5: new high speed USB device using ehci_hcd and address 3
hub 1-0:1.0: unable to enumerate USB device on port 5
usb 2-3: new low speed USB device using ohci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 2-3: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input2
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-3/input0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 6804.800 MB/sec
xor: using function: generic_sse (6804.800 MB/sec)
usb 1-5: new high speed USB device using ehci_hcd and address 4
hub 1-0:1.0: unable to enumerate USB device on port 5
raid6: int64x1 2020 MB/s
raid6: int64x2 2583 MB/s
usb 1-5: new high speed USB device using ehci_hcd and address 5
hub 1-0:1.0: unable to enumerate USB device on port 5
raid6: int64x4 2236 MB/s
raid6: int64x8 1697 MB/s
raid6: sse2x1 3131 MB/s
usb 2-5: new full speed USB device using ohci_hcd and address 3
raid6: sse2x2 3900 MB/s
usb 2-5: not running at top speed; connect to a high speed hub
usb 2-5: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
raid6: sse2x4 4192 MB/s
raid6: using algorithm sse2x4 (4192 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
fuse init (API version 7.10)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Generic USB Storage-CFC I20A PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg3 type 0
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
IT8716 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
input: PC Speaker as /class/input/input5
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
Floppy drive(s): fd0 is 1.44M
ACPI: Power Button (CM) [PWRB]
FDC 0 is a post-1991 82077
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:e5:dd:9c
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:10.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.51 Fri Apr 17 00:08:33 PDT 2009
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
EXT3 FS on sdb1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
GFS2: gfs2 mount does not exist
GFS2: gfs2 mount does not exist
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Adding 13791792k swap on /dev/sda2. Priority:-1 extents:1 across:13791792k
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bridge firewalling registered
device eth0 entered promiscuous mode
device vbox0 entered promiscuous mode
br0: topology change detected, propagating
br0: port 2(vbox0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
CIFS: Unknown mount option codepage
eth0: no IPv6 routers present
br0: no IPv6 routers present
vbox0: no IPv6 routers present
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0d7c7a0
vboxdrv: fAsync=1 offMin=0xdca1 offMax=0xdca1
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0f135e0
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 2-3: reset low speed USB device using ohci_hcd and address 2
input: Logitech Optical USB Mouse as /class/input/input6
generic-usb 0003:046D:C016.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-3/input0
usb 1-7: new high speed USB device using ehci_hcd and address 6
usb 1-7: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access 0 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: [sdd] 7831552 512-byte hardware sectors: (4.00 GB/3.73 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] 7831552 512-byte hardware sectors: (4.00 GB/3.73 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg4 type 0
usb 1-7: USB disconnect, address 6
usb 1-7: new high speed USB device using ehci_hcd and address 7
usb 1-7: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg4 type 0
usb 1-7: USB disconnect, address 7
usb 1-8: new high speed USB device using ehci_hcd and address 8
usb 1-8: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sd 9:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg4 type 0
usb 1-8: USB disconnect, address 8
usb 1-7: new high speed USB device using ehci_hcd and address 9
usb 1-7: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 10:0:0:0: [sdd] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg4 type 0
usb 1-7: USB disconnect, address 9
usb 1-7: new high speed USB device using ehci_hcd and address 10
usb 1-7: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] 4007936 512-byte hardware sectors: (2.05 GB/1.91 GiB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 11:0:0:0: [sdd] Attached SCSI removable disk
sd 11:0:0:0: Attached scsi generic sg4 type 0
usb 1-7: USB disconnect, address 10
usb 1-8: new high speed USB device using ehci_hcd and address 11
usb 1-8: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 12:0:0:0: Direct-Access FUJITSU MHV2080AT 0811 PQ: 0 ANSI: 0
sd 12:0:0:0: [sdd] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled
sd 12:0:0:0: [sdd] Assuming drive cache: write through
sd 12:0:0:0: [sdd] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled
sd 12:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 12:0:0:0: [sdd] Attached SCSI disk
sd 12:0:0:0: Attached scsi generic sg4 type 0
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
Too big adjustment 32
usb 1-8: USB disconnect, address 11
Clocksource tsc unstable (delta = 62508610 ns)
vifm[5456]: segfault at 118 ip 00007fef815c845e sp 00007fff89d145c0 error 4 in libc-2.9.so[7fef81557000+140000]
vifm[22757]: segfault at 20 ip 00007f76857565f0 sp 00007fff8de98f88 error 4 in libc-2.9.so[7f76856df000+140000]
vifm[4241]: segfault at 118 ip 00007f8f6356845e sp 00007fff6bcb4a80 error 4 in libc-2.9.so[7f8f634f7000+140000]
CIFS VFS: No response for cmd 50 mid 35169
cdrom: This disc doesn't have any tracks I recognize!
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7c 60 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1438080
Buffer I/O error on device hdc, logical block 359520
Buffer I/O error on device hdc, logical block 359521
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7c 60 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1438080
Buffer I/O error on device hdc, logical block 359520
Buffer I/O error on device hdc, logical block 359521
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7c 60 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1438080
Buffer I/O error on device hdc, logical block 359520
Buffer I/O error on device hdc, logical block 359521
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7b fb 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1437676
Buffer I/O error on device hdc, logical block 359419
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7b fb 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1437676
Buffer I/O error on device hdc, logical block 359419
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
(reserved error code) -- (asc=0x02, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 7b fb 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1437676
Buffer I/O error on device hdc, logical block 359419
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
Unrecovered read error -- (asc=0x11, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 74 41 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1429764
Buffer I/O error on device hdc, logical block 357441
Buffer I/O error on device hdc, logical block 357442
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
Unrecovered read error -- (asc=0x11, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 74 41 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1429764
Buffer I/O error on device hdc, logical block 357441
Buffer I/O error on device hdc, logical block 357442
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Medium error -- (Sense key=0x03)
Unrecovered read error -- (asc=0x11, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 05 74 41 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 1429764
Buffer I/O error on device hdc, logical block 357441
Buffer I/O error on device hdc, logical block 357442
GFS2: gfs2 mount does not exist
GFS2: gfs2 mount does not exist
GFS2: gfs2 mount does not exist
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
attempt to access beyond end of device
hdc: rw=0, want=1028, limit=4
attempt to access beyond end of device
hdc: rw=0, want=2052, limit=4
UDF-fs: No partition found (1)
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
attempt to access beyond end of device
hdc: rw=0, want=20, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048)
attempt to access beyond end of device
hdc: rw=0, want=132, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048)
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
attempt to access beyond end of device
hdc: rw=0, want=8, limit=4
XFS: SB read failed
attempt to access beyond end of device
hdc: rw=0, want=72, limit=4
attempt to access beyond end of device
hdc: rw=0, want=128, limit=4
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hdc): ntfs_fill_super(): Not an NTFS volume.
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
attempt to access beyond end of device
hdc: rw=0, want=1028, limit=4
attempt to access beyond end of device
hdc: rw=0, want=2052, limit=4
UDF-fs: No partition found (1)
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
attempt to access beyond end of device
hdc: rw=0, want=20, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048)
attempt to access beyond end of device
hdc: rw=0, want=132, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048)
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
attempt to access beyond end of device
hdc: rw=0, want=8, limit=4
XFS: SB read failed
attempt to access beyond end of device
hdc: rw=0, want=72, limit=4
attempt to access beyond end of device
hdc: rw=0, want=128, limit=4
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hdc): ntfs_fill_super(): Not an NTFS volume.
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
attempt to access beyond end of device
hdc: rw=0, want=1028, limit=4
attempt to access beyond end of device
hdc: rw=0, want=2052, limit=4
UDF-fs: No partition found (1)
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
attempt to access beyond end of device
hdc: rw=0, want=20, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048)
attempt to access beyond end of device
hdc: rw=0, want=132, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048)
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
attempt to access beyond end of device
hdc: rw=0, want=8, limit=4
XFS: SB read failed
attempt to access beyond end of device
hdc: rw=0, want=72, limit=4
attempt to access beyond end of device
hdc: rw=0, want=128, limit=4
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hdc): ntfs_fill_super(): Not an NTFS volume.
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
attempt to access beyond end of device
hdc: rw=0, want=1028, limit=4
attempt to access beyond end of device
hdc: rw=0, want=2052, limit=4
UDF-fs: No partition found (1)
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
attempt to access beyond end of device
hdc: rw=0, want=20, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048)
attempt to access beyond end of device
hdc: rw=0, want=132, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048)
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
attempt to access beyond end of device
hdc: rw=0, want=8, limit=4
XFS: SB read failed
attempt to access beyond end of device
hdc: rw=0, want=72, limit=4
attempt to access beyond end of device
hdc: rw=0, want=128, limit=4
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hdc): ntfs_fill_super(): Not an NTFS volume.
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
attempt to access beyond end of device
hdc: rw=0, want=1028, limit=4
attempt to access beyond end of device
hdc: rw=0, want=2052, limit=4
UDF-fs: No partition found (1)
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
attempt to access beyond end of device
hdc: rw=0, want=20, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048)
attempt to access beyond end of device
hdc: rw=0, want=132, limit=4
ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048)
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
attempt to access beyond end of device
hdc: rw=0, want=8, limit=4
XFS: SB read failed
attempt to access beyond end of device
hdc: rw=0, want=72, limit=4
attempt to access beyond end of device
hdc: rw=0, want=128, limit=4
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hdc): ntfs_fill_super(): Not an NTFS volume.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0 |
_________________
Man trägt wieder Hirn!!! |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Tue Apr 28, 2009 5:06 am Post subject: |
|
|
Well, I can tell you have kernel issues. That's really easy to see. You have segmentation faults, and so much more. Your drive issue is most likely a hardware issue, but that's definitely the least of your problems.
Post your current .config, as well as the results of lspci -n and cat /proc/cpuinfo and your /etc/fstab file.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
pfloydde
n00b
Joined: 26 Sep 2007
Posts: 5
|
| Posted: Tue Apr 28, 2009 6:27 am Post subject: |
|
|
/etc/fstab
| Code: | /dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sdb1 / ext3 noatime 0 1
/dev/sda2 none swap sw 0 0
/dev/hda1 /mnt/hda1 auto auto,rw 0 0
/dev/hdb1 /mnt/hdb1 auto auto,rw 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0 |
| Code: | #> lspci -n
00:00.0 0500: 10de:02f0 (rev a2)
00:00.1 0500: 10de:02fa (rev a2)
00:00.2 0500: 10de:02fe (rev a2)
00:00.3 0500: 10de:02f8 (rev a2)
00:00.4 0500: 10de:02f9 (rev a2)
00:00.5 0500: 10de:02ff (rev a2)
00:00.6 0500: 10de:027f (rev a2)
00:00.7 0500: 10de:027e (rev a2)
00:02.0 0604: 10de:02fc (rev a1)
00:03.0 0604: 10de:02fd (rev a1)
00:04.0 0604: 10de:02fb (rev a1)
00:09.0 0500: 10de:0270 (rev a2)
00:0a.0 0601: 10de:0260 (rev a3)
00:0a.1 0c05: 10de:0264 (rev a3)
00:0a.2 0500: 10de:0272 (rev a3)
00:0b.0 0c03: 10de:026d (rev a3)
00:0b.1 0c03: 10de:026e (rev a3)
00:0d.0 0101: 10de:0265 (rev a1)
00:0e.0 0101: 10de:0266 (rev a1)
00:0f.0 0101: 10de:0267 (rev a1)
00:10.0 0604: 10de:026f (rev a2)
00:10.1 0403: 10de:026c (rev a2)
00:14.0 0680: 10de:0269 (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
03:00.0 0300: 10de:0163 (rev a1)
04:09.0 0104: 1095:0680 (rev 02) |
| Code: | #> lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 LE] (rev a1)
04:09.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) |
| Code: | #> cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
stepping : 2
cpu MHz : 2204.594
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 4409.18
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
stepping : 2
cpu MHz : 2204.594
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 4409.21
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc |
And the .config as pastebin.com:
http://pastebin.com/m59844d25
_________________
Man trägt wieder Hirn!!! |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Tue Apr 28, 2009 6:55 pm Post subject: |
|
|
I went through your kernel, and decided a kernel seed would be better as a start. You should notice a real difference in the operation of the machine with this kernel.
Click here for your new .config. Compile as is.
For the best results, please do the following:
1) Move your .config file out of your kernel source directory (/usr/src/linux- ).
2) Issue the command make mrproper. This is a destructive step. It returns the source to pristine condition. Unmoved .config files will be deleted!
3) Copy my .config into your source directory.
4) Issue the command make && make modules_install.
5) Install the kernel as you normally would, and reboot.
6) Once it boots, please post /var/log/dmesg so I can see how things loaded.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
pfloydde
n00b
Joined: 26 Sep 2007
Posts: 5
|
| Posted: Wed Apr 29, 2009 4:03 pm Post subject: |
|
|
Hello,
thanks for your help, but the Kernel, compiled with your .config, stops booting with a Kernel_Panic and wrote an '...unknown fs "ram0"...' a few lines before. He can't find the root-device. Maybe I forgotten to say, that I used genkernel before  . On the other side I don't think it is a Kernel problem, because I can use the Optiarc-DVDRW Drive manual. I can mount CD's and DVD's and burning both types too. Only automounting doesn't work. Thus I begin searching the problem in hald config. ... and while I wrote this posting I got the Idea  to test diffrent Media-Types...
hmmpf... harrr... 
Only some original DVD-Movies and some DVD-Data can't be automounted!!!
.. but can mounted manual with | Code: | | #> mount /dev/hdc /mnt/cdrom |
I'm so sorry to waste your time. Next time I'll testing better, before asking community. 
_________________
Man trägt wieder Hirn!!! |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Wed Apr 29, 2009 6:01 pm Post subject: |
|
|
Knowing what error you got would help fix the kernel.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
