View previous topic :: View next topic |
Author |
Message |
bammbamm808 Guru
Joined: 08 Dec 2002 Posts: 548 Location: Hawaii
|
Posted: Thu Aug 14, 2003 5:05 am Post subject: modules loaded, but cat <file> > /dev/usb/lp0 = not |
|
|
I still can't cat a file directly to the device, but I can print through cups, so what the heck?
Nforce2 mobo
Epson Stylus Color 740 on USB
2.4.21-vanilla w/some cflags
Modules loaded:
usbcore
usb-ohci
ehci-hcd
printer
cat /proc/bus/usb/devices shows my printer there, as does dmesg
However, catting a file to /dev/usb/lp0 produces exactly no result.
What am I missing here? This is driving me batty. _________________ MSI MAG B550 Tomahawk
Ryzen 3900x
32Gb Samsung B-die (16GB dual rank x2) DDR4 @ 3200MHz, cl14
Geforce RTX 2070S 8GB
Samsung m.2 NVME pcie-3.0
Etc.... |
|
Back to top |
|
|
trouser_pilot n00b
Joined: 07 Sep 2002 Posts: 52 Location: Calgary, AB
|
Posted: Thu Aug 14, 2003 8:10 pm Post subject: |
|
|
In the manual, does it say you can print from DOS? I can print to my Canon BJC-6000 from cups but not directly byt cat'ing the file and redirecting to the printer. I have tried to print from DOS but was not able to (had to try). |
|
Back to top |
|
|
bammbamm808 Guru
Joined: 08 Dec 2002 Posts: 548 Location: Hawaii
|
Posted: Fri Aug 15, 2003 3:44 am Post subject: |
|
|
DOS? Was dat?
And yes, piping a file to the device should work just fine. And no, the manual won't cover it. That's why we're all here. _________________ MSI MAG B550 Tomahawk
Ryzen 3900x
32Gb Samsung B-die (16GB dual rank x2) DDR4 @ 3200MHz, cl14
Geforce RTX 2070S 8GB
Samsung m.2 NVME pcie-3.0
Etc.... |
|
Back to top |
|
|
|