Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Nokia 5300 doesn't works as USB MASS STORAGE
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
McTango
n00b
n00b


Joined: 11 Dec 2004
Posts: 66
Location: Formosa - Argentina

PostPosted: Tue Feb 10, 2009 7:36 pm    Post subject: Nokia 5300 doesn't works as USB MASS STORAGE Reply with quote

Hi people...
I have a Nokia 5300 with 1GB mem card.
When i plug it to my 2.6.27-gentoo-r8 box, works OK in "Nokia Mode" (as Modem), and connects perfect to GPRS network using KPPP.
But when i plug it as "Mass Storage mode", Gentoo keeps reading phone memory all the time, and doesn't gives access to SDB device.
This is the result of "dmesg":
Code:
usb 3-1: new full speed USB device using uhci_hcd and address 5
usb 3-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access     Nokia    Nokia 5300       0000 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdb] 1987585 512-byte hardware sectors (1018 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 1987585 512-byte hardware sectors (1018 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb:
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
.
.
.
.
and keeps sending:
Code:
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
all the time.

Any ideas?

Thanks.
_________________
Charly Tango
Formosa - Argentina
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
To emerge, or not to emerge: that is the question.
_________________
Back to top
View user's profile Send private message
mgrela
Tux's lil' helper
Tux's lil' helper


Joined: 26 Jul 2008
Posts: 123
Location: Polska

PostPosted: Wed Feb 11, 2009 10:33 am    Post subject: Reply with quote

Doest it work under windows ?
Did work earlier under linux ?
_________________
Maciej Grela
You just keep on trying till you run out of cake.
Back to top
View user's profile Send private message
McTango
n00b
n00b


Joined: 11 Dec 2004
Posts: 66
Location: Formosa - Argentina

PostPosted: Wed Feb 11, 2009 1:05 pm    Post subject: Reply with quote

Sorry... I forgot to mention that.

Yes, it works OK under Windows as USB MASS STORAGE (and as MODEM too).

No, never tried to use it before under Linux, until now.
This is my first attempt under non Windows OS

Two additional comments:
-First tried with CellPhone's MicroSD card formatted by Windows, then formatted by the CellPhone's utility (i think i'ts the same, but just in case...). Anyone worked.
-Other USB MASS STORAGE devices like pen drives or MP3s works OK.

Thanks.
_________________
Charly Tango
Formosa - Argentina
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
To emerge, or not to emerge: that is the question.
_________________
Back to top
View user's profile Send private message
eisenmann
n00b
n00b


Joined: 08 Jan 2006
Posts: 31

PostPosted: Wed Feb 18, 2009 10:34 pm    Post subject: Reply with quote

Hello i have the same problem with my nokia 6300i.

Code:

usb-storage: device found at 5                                                                                                                           
usb-storage: waiting for device to settle before scanning                                                                                               
scsi 3:0:0:0: Direct-Access     Nokia    Nokia 6300i      0000 PQ: 0 ANSI: 4                                                                             
sd 3:0:0:0: [sdb] 3970049 512-byte hardware sectors (2033 MB)                                                                                           
sd 3:0:0:0: [sdb] Write Protect is off                                                                                                                   
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00                                                                                                               
sd 3:0:0:0: [sdb] Assuming drive cache: write through                                                                                                   
sd 3:0:0:0: [sdb] 3970049 512-byte hardware sectors (2033 MB)                                                                                           
sd 3:0:0:0: [sdb] Write Protect is off                                                                                                                   
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00                                                                                                               
sd 3:0:0:0: [sdb] Assuming drive cache: write through                                                                                                   
 sdb: sdb1                                                                                                                                               
sd 3:0:0:0: [sdb] Attached SCSI removable disk                                                                                                           
sd 3:0:0:0: Attached scsi generic sg2 type 0                                                                                                             
usb-storage: device scan complete                                                                                                                       
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]                                                                                                             
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0                                                                                                                       
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]                                                                                                             
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0                                                                                                                       
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]                                                                                                             
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0         

and i found this this to that problem in a other forum:

http://linux.derkeiler.com/Mailing-Lists/Kernel/2008-07/msg12252.html
Back to top
View user's profile Send private message
eisenmann
n00b
n00b


Joined: 08 Jan 2006
Posts: 31

PostPosted: Sat Feb 21, 2009 10:49 am    Post subject: Reply with quote

Hi ,

i have installed kernel 2.6.28-gentoo-r2
now it look fine like this:
Code:

scsi2 : SCSI emulation for USB Mass Storage devices
usb 3-1: New USB device found, idVendor=0421, idProduct=00c2
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Nokia 6300i
usb 3-1: Manufacturer: Nokia
usb 3-1: SerialNumber: 354830020969228
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     Nokia    Nokia 6300i      0000 PQ: 0 ANSI: 4
sd 2:0:0:0: [sdb] 3970048 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 3970048 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
Back to top
View user's profile Send private message
optiluca
Guru
Guru


Joined: 16 Jan 2006
Posts: 539
Location: Rivergaro, Italy

PostPosted: Sat Feb 21, 2009 11:45 am    Post subject: Reply with quote

Known bug with many nokia phone models http://patchwork.kernel.org/patch/2191/

It seems as if the patch made it into 2.6.28-gentoo-r2? Because it also works for me :P
_________________
# "Hmm, sounds like your system froze up."
# "I don't know why. It's about 80 degrees in here!"

http://www.rinkworks.com/stupid/cs_mincing.shtml
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum