Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in

  FAQ | Search | Memberlist | Usergroups | Statistics | Profile | Log in to check your private messages | Log in | Register

problema con lm_sensors
 View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
_Echelon_
Apprentice
Apprentice


Joined: 20 Jul 2003
Posts: 293
PostPosted: Fri Aug 08, 2003 5:38 pm    Post subject: problema con lm_sensors Reply with quote
allora, ho seguito alla lettera questo link dal sito di gentoo per installare i lm_sensors. Con gkrellm2 vedo temperatura, ventole e voltaggi. Va tutto bene se non fosse per un dmesg strano; lo posto:
Code:

bash-2.05b# dmesg
ading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4363  Sat Apr 19 17:46:46 PDT 2003
spurious 8259A interrupt: IRQ7.
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
Vesafb does not support changing the video mode
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
sr0: mmc-3 profile: Ah
sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
sr1: mmc-3 profile: 8h
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Error: command never completed
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
i2c-ali1535.o: Resetting entire SMB Bus to clear busy condition (08)
i2c-ali1535.o: SMBus reset failed! (0x08) - controller or device on bus is probably hung
bash-2.05b#

da quanto ho capito il problema è i2c: sul kernel ho abilitato come moduli le cose ke indicava la guida. Non mi fa vedere altro il dmesg :(
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



 Links: forums.gentoo.org | www.gentoo.org | bugs.gentoo.org | wiki.gentoo.org | forum-mods@gentoo.org

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy