| View previous topic :: View next topic |
| Author |
Message |
Poussin
l33t
Joined: 08 Jun 2007
Posts: 659
Location: Liège
|
 Posted: Fri Jan 30, 2009 10:40 am Post subject: [automount] Gnome 2.22 et l'automount "nouvelle generat |
 |
|
Après avoir "fait avec" pendant un certain temps, j'ai décidé de jeter un oeil sur l'automount des supports amovibles de mon portable. Tout se passait bien jusqu'à une mise à jour (je pense :s ) vers Gnome 2.22. Depuis, les clés USB et autres disques externes ne se montent plus automatiquement. Avant cela, c'était plaisir d'avoir le materiel automatiquement monté dans /media et avoir la petite icone de la partition sur le bureau (surtout pour la copine, les parents ...).
Après quelques recherches, (ici: http://www.gentoo.org/proj/en/desktop/gnome/howtos/gnome-2.22-upgrade.xml), on constate que ce n'est plus gnome-volume-manager qui gère cela. Ils conseillent aux utilisateurs de Gnome, de désactiver le flag automount de ce paquet:
| Quote: | | Because of this change, there is now an automount use flag on gnome-volume-manager for users who wish to keep the old behavior. Users who previously started gnome-volume-manager with non-Gnome desktops are strongly advised to enable this use flag. Gnome users on the other hand are strongly advised to make sure that this use flag is not turned on, as it will cause problems with Nautilus. |
J'ai donc bien:
| Code: |
[ebuild R ] gnome-base/gnome-volume-manager-2.22.5 USE="-automount -consolekit -debug" 396 kB
|
Inutile de spécifier que mon disque est bien reconnu. Le disque et la partition de celui-ci apparaissent bien dans /proc/partitions.
Un petit tail -f /var/log/message me donne:
| Code: |
Jan 30 11:17:25 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:17:25 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:07 Fly usb 1-1: USB disconnect, address 13
Jan 30 11:19:07 Fly usb-storage: storage_disconnect() called
Jan 30 11:19:07 Fly usb-storage: usb_stor_stop_transport called
Jan 30 11:19:07 Fly usb-storage: -- usb_stor_release_resources
Jan 30 11:19:07 Fly usb-storage: -- sending exit command to thread
Jan 30 11:19:07 Fly usb-storage: -- dissociate_dev
Jan 30 11:19:07 Fly usb-storage: *** thread awakened.
Jan 30 11:19:07 Fly usb-storage: -- exiting
Jan 30 11:19:33 Fly usb 1-2: new high speed USB device using ehci_hcd and address 14
Jan 30 11:19:33 Fly usb 1-2: configuration #1 chosen from 1 choice
Jan 30 11:19:33 Fly usb-storage: USB Mass Storage device detected
Jan 30 11:19:33 Fly usb-storage: -- associate_dev
Jan 30 11:19:33 Fly usb-storage: Vendor: 0x040d, Product: 0x6204, Revision: 0x0003
Jan 30 11:19:33 Fly usb-storage: Interface Subclass: 0x02, Protocol: 0x50
Jan 30 11:19:33 Fly usb-storage: Transport: Bulk
Jan 30 11:19:33 Fly usb-storage: Protocol: 8020i
Jan 30 11:19:33 Fly scsi7 : SCSI emulation for USB Mass Storage devices
Jan 30 11:19:33 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:33 Fly usb-storage: device found at 14
Jan 30 11:19:33 Fly usb-storage: waiting for device to settle before scanning
Jan 30 11:19:38 Fly usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jan 30 11:19:38 Fly usb-storage: GetMaxLUN command result is 1, data is 0
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command INQUIRY (6 bytes)
Jan 30 11:19:38 Fly usb-storage: 12 00 00 00 24 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 36/36
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly scsi 7:0:0:0: Direct-Access FUJITSU MHV2080AT 0000 PQ: 0 ANSI: 2
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 30 11:19:38 Fly usb-storage: 00 00 00 00 00 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_CAPACITY (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 25 00 00 00 00 00 00 00 00 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 8/8
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command MODE_SENSE_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 192/192
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Write Protect is off
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Mode Sense: 00 00 00 00
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Assuming drive cache: write through
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 30 11:19:38 Fly usb-storage: 00 00 00 00 00 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x5 L 0 F 0 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_CAPACITY (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 25 00 00 00 00 00 00 00 00 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x6 L 8 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 8/8
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command MODE_SENSE_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x7 L 192 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 192/192
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Write Protect is off
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Mode Sense: 00 00 00 00
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Assuming drive cache: write through
Jan 30 11:19:38 Fly sda:<7>usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 00 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x8 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly sda1
Jan 30 11:19:38 Fly sd 7:0:0:0: [sda] Attached SCSI disk
Jan 30 11:19:38 Fly sd 7:0:0:0: Attached scsi generic sg0 type 0
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad LUN (0:1)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (1:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (2:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (3:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (4:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (5:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (6:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Bad target number (7:0)
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x40000
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: device scan complete
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 00 00 00 20 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x9 L 16384 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 3 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 16384/16384
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f8 00 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xa L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f8 a0 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f8 a8 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 20 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xd L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f8 70 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xe L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f7 b0 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0xf L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 f7 20 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x10 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 28 00 00 60 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x11 L 49152 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 10 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 49152/49152
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 02 00 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x12 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 3f 00 00 20 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x13 L 16384 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 3 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 16384/16384
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e4 3f 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x14 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e4 af 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x15 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e4 bf 00 00 02 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x16 L 1024 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 1024 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 1024/1024
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 00 00 00 5f 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x17 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e4 7f 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x18 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e3 bf 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x19 L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
Jan 30 11:19:38 Fly usb-storage: queuecommand called
Jan 30 11:19:38 Fly usb-storage: *** thread awakened.
Jan 30 11:19:38 Fly usb-storage: Command READ_10 (10 bytes)
Jan 30 11:19:38 Fly usb-storage: 28 00 09 50 e3 2f 00 00 08 00
Jan 30 11:19:38 Fly usb-storage: Bulk Command S 0x43425355 T 0x1a L 4096 F 128 Trg 0 LUN 0 CL 12
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 31/31
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk command transfer result=0
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 4096/4096
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk data transfer result 0x0
Jan 30 11:19:38 Fly usb-storage: Attempting to get CSW...
Jan 30 11:19:38 Fly usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 30 11:19:38 Fly usb-storage: Status code 0; transferred 13/13
Jan 30 11:19:38 Fly usb-storage: -- transfer complete
Jan 30 11:19:38 Fly usb-storage: Bulk status result = 0
Jan 30 11:19:38 Fly usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x0
Jan 30 11:19:38 Fly usb-storage: scsi cmd done, result=0x0
Jan 30 11:19:38 Fly usb-storage: *** thread sleeping.
|
Je me demande donc, comment retrouver l'automount sans devoir placer automount dans USE. Toute aide serait la bienvenue ^^
Merci
Last edited by Poussin on Sat Jan 31, 2009 8:56 am; edited 1 time in total |
|
| Back to top |
|
 |
netfab
Veteran
Joined: 03 Mar 2005
Posts: 1897
Location: 127.0.0.1
|
| Posted: Fri Jan 30, 2009 11:09 am Post subject: |
|
|
Salut,
Est ce que tu as le démon HAL démarré ?
Que donne : emerge -pv gnome-mount
As tu des règles particulères dans :
- /etc/hal/fdi/policy/
- /etc/udev/rules.d/
Concernant ces devices, sont t'ils définis dans le fstab ?
Lorsque tu branches une clé usb par exemple, que donne :
| Code: |
$ tail -n 25 ~/.xsession-errors
$ dmesg | tail -n 25
$ hal-device $(hal-find-by-property --key block.device --string /dev/sdd
|
(dans la dernière commande remplace sdd par le véritable device, donné par la commande dmesg)
Donne ton emerge --info au cas où, et çà sera tout pour le moment  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
