| View previous topic :: View next topic |
| Author |
Message |
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
 Posted: Wed Dec 17, 2008 5:34 am Post subject: X-server-1.5.3 different behaviour in 3 installs one fails |
 |
|
i have 3 installs of gentoo . one in laptop . the upgrade to version 1.5.3 went ok and all ok.
in desktop profiled 2008.0/desktop the upgrade went ok and all ok
but in profiled 2008.0 desktop upgrade went ok but key board and mouse wont work.
just gets stuck at kdm , no alt ctl F1 . just have to hard reset. 
xorg.0.log does not say any error
i have tried to un install keyboard as mentioned in the emerge message but just wouldnt work
shown below are message and xorg.0.logs
| Code: | X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r3 i686
Current Operating System: Linux tux1 2.6.27-gentoo-r3 #1 SMP Tue Nov 18 15:19:28 IST 2008 i686
Build Date: 17 December 2008 09:14:37AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 17 10:19:42 2008
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path built-ins.
(**) FontPath set to:
built-ins,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81cfb80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 2
(--) PCI:*(0@0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xe0000000/0, 0xe8100000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.5.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xE8100000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 15083
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "640x480"x60.0 23.86 640 656 720 800 480 481 484 497 -hsync +vsync (29.8 kHz)
(II) intel(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "720x405"x70.0 26.47 720 736 808 896 405 406 409 422 -hsync +vsync (29.5 kHz)
(II) intel(0): Modeline "800x600"x60.0 38.22 800 832 912 1024 600 601 604 622 -hsync +vsync (37.3 kHz)
(II) intel(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 64.11 1024 1080 1184 1344 768 769 772 795 -hsync +vsync (47.7 kHz)
(II) intel(0): EDID vendor "GSM", prod id 15083
(II) intel(0): Output VGA connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA using initial mode 832x624
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (280, 210) mm
(**) intel(0): DPI set to (75, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000207 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 90880 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 363516 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xe8100000
(II) intel(0): [drm] ring buffer = 0xe0000000
(EE) intel(0): I830 Dma Initialization Failed
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xdb02e000 at 0xb7b1f000
(II) intel(0): [drm] Closed DRM master.
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 10223616 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00c00000 (pgoffset 3072)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr (1024 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: overlay registers (4 kB, 0x0000000018fcf000 physical
)
(II) intel(0): 0x00800000-0x00bfffff: front buffer (3328 kB) X tiled
(II) intel(0): 0x00c00000-0x015bffff: exa offscreen (9984 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 195 |
the emerge message for serber-1.5.3
| Code: | Make sure your reduced blanking modelines are safe!
* You must rebuild all drivers if upgrading from xorg-server 1.4.1
* or earlier, because the ABI changed. If you cannot start X because
* of module version mismatch errors, this is your problem.
* You can generate a list of all installed packages in the x11-drivers
* category using this command:
* emerge portage-utils; qlist -I -C x11-drivers/
* Messages for package x11-drivers/xf86-input-evdev-2.1.0:
* If your XKB (keyboard settings) stopped working,
* you may uninstall this driver or move your XKB configuration.
* Download an example from http://dev.gentoo.org/~compnerd/temp/hal-config-examples/
* (these will be installed with sys-apps/hal soon),
* and drop it into /etc/hal/fdi/policy/
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* GNU info directory index is up-to-date.
padoor conf.d # |
nothing could make the server work with my mouse and key board.
what do i do .
currently down graded to 1.5.2 and it works.
i have tried to do all mentioned in message.
by the way recompile of intel driver gets terminated. with xdriver-1.5.3
i see (II) AIGLX: Screen 0 is not DRI capable
how do i check this DRI part in running installations? for no xog.log available
what DRI has to do with mouse and key board?
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
 |
jburns
Veteran
Joined: 18 Jan 2007
Posts: 1214
Location: Massachusetts USA
|
| Posted: Wed Dec 17, 2008 5:57 am Post subject: |
|
|
| Try the evdev driver for the keyboard and mouse. |
|
| Back to top |
|
|
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
| Posted: Wed Dec 17, 2008 6:22 am Post subject: |
|
|
i have tried re emerging input mouse, evdev, keyboard and video
it does not help at all. the screen is just stuck.
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
|
jburns
Veteran
Joined: 18 Jan 2007
Posts: 1214
Location: Massachusetts USA
|
| Posted: Wed Dec 17, 2008 7:09 am Post subject: |
|
|
From xorg.0.log | Quote: | (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0 |
This is disabling the keyboard and mouse. Hal should be configuring the keyboard and mouse to use the evdev driver but I do not see that in the log.
| Quote: | | (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) |
If you are using hal and acpi, starting hald and acpid using the same run level will fix this.
See https://bugs.gentoo.org/show_bug.cgi?id=239092 |
|
| Back to top |
|
|
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
| Posted: Wed Dec 17, 2008 8:23 am Post subject: |
|
|
this being a desktop comp i did not think acpid is required.
as it says i have not configured any acpi related files.
the same is true for the other install in the same desktop. only in another partition. which works fine.
in laptop acpid and hal are both started at default level.
the only thing noted from bugzilla is that xf86-inptut-fdi to be emerged. i can try that.
i will check the hal useflags also.
it is still not clear why the xorg-server would not emerge hal also with required useflags and fdi if needed.
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
|
i92guboj
Bodhisattva
Joined: 30 Nov 2004
Posts: 10315
Location: Córdoba (Spain)
|
| Posted: Wed Dec 17, 2008 3:11 pm Post subject: |
|
|
I was hit by this idiotic behavior of X today. I chose not to use evdev mainly for two reasons:
- I have no reason to do so.
- I don't have the time to deal with the migration (no, it doesn't work out of the box for a non-english keyboard at least.
Following my policy of "if it ain't broke, don't fix it", I continue running xf86-input-keyboard and xf86-input-mouse without a single problem, except those "problems" created by hal itself. I don't complain, I understand that if I decide to run a non-standard setup I got to keep the pieces myself.
To the point, I saw the warning in the log, and just tried the obvious:
| Code: | | Option "AllowEmptyInput" "false" |
In my xorg.conf, which seems to work. |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
| Posted: Wed Dec 17, 2008 3:16 pm Post subject: |
|
|
I had the same, this morning. And after a few tries of reemerging x11-drivers/xf86-input-mouse and x11-drivers/xf86-input-keyboard I ended up masking xorg and downgrading to 1.5.2 and all was well again. I will take a look at this solution later this week. Thanks.
[EDIT]BTW, I am using a US keyboard and still had this bad behavior... [/EDIT]
_________________
John
My gentoo overlay
Instructons for overlay |
|
| Back to top |
|
|
i92guboj
Bodhisattva
Joined: 30 Nov 2004
Posts: 10315
Location: Córdoba (Spain)
|
| Posted: Wed Dec 17, 2008 4:08 pm Post subject: |
|
|
| drescherjm wrote: | | [EDIT]BTW, I am using a US keyboard and still had this bad behavior... [/EDIT] |
My comment about non-english keyboard was aimed to the migration to evdev. I am still using kdb/mouse because of that. When X decided to automatically load evdev, my keyboard layout was all messed. I just don't feel (yet) like researching how to configure it, being the lazy guy that I am. So I just uninstalled evdev and forced X to use the old keyboard and mouse drivers, which works without a problem for me. |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
| Posted: Wed Dec 17, 2008 4:48 pm Post subject: |
|
|
I replied about that because it appears that the other user is also using non us keyboards and the bug report is also about that (i believe).
_________________
John
My gentoo overlay
Instructons for overlay |
|
| Back to top |
|
|
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
| Posted: Wed Dec 17, 2008 5:07 pm Post subject: |
|
|
i use US keyboard layout.
the server is changing to non-US key board. i think.
for the time being i will use the 1.5.2 server which work ok.
the other 2 installations did not have any complaint at all with 1.5.3
probably it has something to do with hal useflags.
i will investigate in all 3 of them and get back.
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
|
| Back to top |
|
|
yngwin
Retired Dev
Joined: 19 Dec 2002
Posts: 4572
Location: Suzhou, China
|
| Posted: Wed Dec 17, 2008 10:48 pm Post subject: |
|
|
| i92guboj wrote: | To the point, I saw the warning in the log, and just tried the obvious:
| Code: | | Option "AllowEmptyInput" "false" |
In my xorg.conf, which seems to work. |
This is indeed the correct fix. I got hit by it as well. IMHO a really stupid change for a minor version update...
_________________
"Those who deny freedom to others deserve it not for themselves." - Abraham Lincoln
Free Culture | Defective by Design | EFF |
|
| Back to top |
|
|
i92guboj
Bodhisattva
Joined: 30 Nov 2004
Posts: 10315
Location: Córdoba (Spain)
|
| Posted: Wed Dec 17, 2008 11:00 pm Post subject: |
|
|
| yngwin wrote: | | i92guboj wrote: | To the point, I saw the warning in the log, and just tried the obvious:
| Code: | | Option "AllowEmptyInput" "false" |
In my xorg.conf, which seems to work. |
This is indeed the correct fix. I got hit by it as well. IMHO a really stupid change for a minor version update... |
A painful one if you ask me.
No way to go back to console plus acpid not responding for some odd reason == hard reboot, with all the risk and hassle that poses. However, as I said, I can't complain since I am both in ~arch and using an unusual setup. |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
|
| Back to top |
|
|
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
| Posted: Thu Dec 18, 2008 2:25 am Post subject: |
|
|
| i92guboj wrote: | I was hit by this idiotic behavior of X today. I chose not to use evdev mainly for two reasons:
- I have no reason to do so.
- I don't have the time to deal with the migration (no, it doesn't work out of the box for a non-english keyboard at least.
Following my policy of "if it ain't broke, don't fix it", I continue running xf86-input-keyboard and xf86-input-mouse without a single problem, except those "problems" created by hal itself. I don't complain, I understand that if I decide to run a non-standard setup I got to keep the pieces myself.
To the point, I saw the warning in the log, and just tried the obvious:
| Code: | | Option "AllowEmptyInput" "false" |
In my xorg.conf, which seems to work. |
my xorg.conf does not show any option line like that either false or true
i have tried addin the line juast above the videodriver intel.
i will try booting. now i am in a chroot env for emerging xorg-server.[the faulty one into working gentoo.
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
|
| Back to top |
|
|
yngwin
Retired Dev
Joined: 19 Dec 2002
Posts: 4572
Location: Suzhou, China
|
| Posted: Thu Dec 18, 2008 2:47 am Post subject: |
|
|
I have it like this:
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AllowEmptyInput" "false"
EndSection |
But I guess both sections should work.
_________________
"Those who deny freedom to others deserve it not for themselves." - Abraham Lincoln
Free Culture | Defective by Design | EFF |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
|
| Back to top |
|
|
padoor
Advocate
Joined: 30 Dec 2005
Posts: 4185
Location: india
|
| Posted: Thu Dec 18, 2008 3:04 am Post subject: |
|
|
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AllowEmptyInput" "false"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "record"
Load "xtrap"
Load "glx"
Load "dbe"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "GSM"
ModelName "20Si"
HorizSync 20.0 - 54.0
VertRefresh 60 - 80
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
|
| Code: | tux1 ~ # X -version
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-generic i686
Current Operating System: Linux tux1 2.6.27-gentoo-r3 #1 SMP Tue Nov 18 15:19:28 IST 2008 i686
Build Date: 18 December 2008 07:49:33AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
tux1 ~ #
|
thanks for this advice.
drescherjm 
i have introduced new setion server flags as shown above.
part of the current xog,conf is shown. and confirmed the new serer is active .
is this the permanent solution?
if so may i mark thread solved?
this post i made from the new server working in previously not working install.
surprisingly the other 2 working install did not require any such addition in xorg.conf.
_________________
reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
| Back to top |
|
|
drescherjm
Advocate
Joined: 05 Jun 2004
Posts: 2790
Location: Pittsburgh, PA, USA
|
| Posted: Thu Dec 18, 2008 3:13 am Post subject: |
|
|
That would be fine.
I guess if anyone else does not have a ServerFlags section they could use ServerLayout like yngwin suggested. So they did not have to make a new section. I already had the ServerFlags so I just added the line.
_________________
John
My gentoo overlay
Instructons for overlay |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Sat Dec 20, 2008 9:47 am Post subject: |
|
|
I don't quite understand what Option "AllowEmptyInput" "false" means. Does it tell Xorg to ignore hal/evdev and instead use InputDevice sections from xorg.conf or does it do something else? Without it my mouse/keyboard/touchpad don't work. With it my keyboard/touchpad are stuck with default settings whatever I put in /etc/hal/fdi/[...], i.e. «us» keyboard layout (I want «be» instead) and I can only move the pointer with the touchpad (no drag, no scroll, no two-finger-scroll).
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
