Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Architectures & Platforms Gentoo on PPC
  • Search

G3 iMac - I can't get 3D Acceleration - Please help.

Have a PowerPC specific problem? This is the spot.
Post Reply
Advanced search
10 posts • Page 1 of 1
Author
Message
Yertman
n00b
n00b
Posts: 4
Joined: Tue May 13, 2008 6:11 pm
Location: Southwest Wisconsin

G3 iMac - I can't get 3D Acceleration - Please help.

  • Quote

Post by Yertman » Tue May 13, 2008 9:19 pm

Hi All,

I have installed Gentoo on a 400Mhz Indigo iMac. This system has a G3 PPC processor and an ATI Rage 128 graphics chip.

I have xorg working and am using fluxbox window manager. Gentoo runs nicely on this hardware with fluxbox and I am very happy with it. The only problem is I can not get 3D acceleration working.

I have made numerous small changes to the xorg.conf and made sure appropriate kernel options were specified, and modules loaded to no avail. When I run glxgears the frame rate is around 80FPS. :(

I have included all info I can think of that might be useful for anyone trying to figure this out. Please let me know if you need more.

I checked bugzilla and this bug related to the r128 driver on the x86 side appears to related as I see these same errors in my xorg log file. http://bugs.gentoo.org/show_bug.cgi?id=216222

I am hoping this is not a bug in the driver and it's just a matter of configuring something differently. Hopefully some more experienced person will see the problem in my config. Thank you! -- Yertman

uname -a output:

Code: Select all

$uname -a
Linux iMac 2.6.24-gentoo-r3 #2 Sun Apr 13 22:43:09 CDT 2008 ppc 740/750 PowerMac2,2 GNU/Linux
xorg.conf

Code: Select all

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
       Load "extmod"
       Load "dri"
       Load "dbe"
       Load "record"
       Load "glx"
       Load "GLcore"
       Load "type1"
       Load "freetype"
       Load "xtrap"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
#	HorizSync    60-60
#	VertRefresh  75-117
 	HorizSync    58-62
        VertRefresh  75-117
	ModeLine "1024x768" 78.5 1024 1045 1141 1312 768 769 772 796 +hsync +vsync
	ModeLine "800x600" 62.4 800 813 893 1040 600 601 604 632 +hsync +vsync
	ModeLine "640x480" 49.9 640 653 717 832 480 481 484 514 +hsync +vsync
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        Option     "SWcursor"          "true" 	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        Option     "ForcePCIMode"     "true"    # [<bool>]
        #Option     "CCEPIOMode"         	# [<bool>]
        #Option     "CCENoSecurity"      	# [<bool>]
        #Option     "CCEusecTimeout"     	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "Display"            	# <str>
        #Option     "PanelWidth"         	# <i>
        #Option     "PanelHeight"        	# <i>
        #Option     "ProgramFPRegs"      	# [<bool>]
        Option     "UseFBDev"         "false"   # [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "ShowCache"          	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
	Identifier  "Card0"
	Driver      "r128"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage 128 PR/PRO AGP 4x TMDS"
#       BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
        DefaultDepth 24
EndSection

Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log

Code: Select all

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/iMac:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN 
Current Operating System: Linux iMac 2.6.24-gentoo-r3 #2 Sun Apr 13 22:43:09 CDT 2008 ppc
Build Date: 13 April 2008
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 13:26:10 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open APM successful
(II) Loader magic: 0x101d6370
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5052 card 1002,5052 rev 00 class 03,80,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev 03 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0e:0: chip 106b,0018 card 0000,0000 rev 01 class 0c,00,10 hdr 00
(II) PCI: 20:0f:0: chip 106b,0021 card 0000,0000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0xf1000000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf5ffffff (0x1000000) MX[B]E
	[2] -1	0	0x80080000 - 0x800fffff (0x80000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0xffffffff (0x80000000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xf5000000 from 0xf5ffffff to 0xf51fffff
(II) PCI Memory resource overlap reduced 0x80080000 from 0x800fffff to 0x80080fff
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x8007ffff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[2] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.3.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 4.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 6.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro VR PR (PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/lib/xorg/modules/drivers//r128_drv.so
(WW) ****INVALID IO ALLOCATION**** b: 0xf0000400 e: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B]
	[19] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "SWcursor" "true"
(**) R128(0): Option "ForcePCIMode" "true"
(**) R128(0): Option "UseFBDev" "false"
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) R128(0): initializing int10
(II) R128(0): No legacy BIOS found -- trying PCI
(II) Attempted to read BIOS 128KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(EE) R128(0): Cannot read V_BIOS (5)
(--) R128(0): Chipset: "ATI Rage 128 Pro VR PR (PCI)" (ChipID = 0x5052)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0xf1000000
(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
(**) R128(0): Using external CRT for display
(**) R128(0): Forced into PCI-only mode
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=7150
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Monitor0: Using hsync range of 58.00-62.00 kHz
(II) R128(0): Monitor0: Using vrefresh range of 75.00-117.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "320x175" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "320x200" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "360x200" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "832x624" (hsync out of range)
(II) R128(0): Not using default mode "416x312" (hsync out of range)
(II) R128(0): Not using default mode "1152x768" (hsync out of range)
(II) R128(0): Not using default mode "576x384" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1600x1024" (hsync out of range)
(II) R128(0): Not using default mode "800x512" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): *Mode "1024x768": 78.5 MHz, 59.8 kHz, 75.2 Hz
(II) R128(0): Modeline "1024x768"   78.50  1024 1045 1141 1312  768 769 772 796 +hsync +vsync
(**) R128(0): *Mode "800x600": 62.4 MHz, 60.0 kHz, 94.9 Hz
(II) R128(0): Modeline "800x600"   62.40  800 813 893 1040  600 601 604 632 +hsync +vsync
(**) R128(0): *Mode "640x480": 49.9 MHz, 60.0 kHz, 116.7 Hz
(II) R128(0): Modeline "640x480"   49.90  640 653 717 832  480 481 484 514 +hsync +vsync
(**) R128(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "512x384"   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x90000000 - 0x90003fff (0x4000) MS[B]
	[1] 0	0	0x94000000 - 0x97ffffff (0x4000000) MS[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[7] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[8] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[9] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[10] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[11] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[13] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[17] 0	0	0xf0000400 - 0xf00004ff (0x100) IS[B]
	[18] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B](OprU)
	[22] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B](OprU)
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
(II) R128(0): Memory manager initialized to (0,0) (1024,2048)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 1278
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		10 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using software cursor
(WW) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Output of lsmod:

Code: Select all

Module                  Size  Used by
smbfs                  73148  2 
snd_pcm_oss            46272  0 
snd_mixer_oss          18368  1 snd_pcm_oss
snd_seq_dummy           3044  0 
snd_seq_oss            38164  0 
snd_seq_midi_event      6944  1 snd_seq_oss
snd_seq                58152  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          7660  3 snd_seq_dummy,snd_seq_oss,snd_seq
r128                   44164  0 
drm                    82424  1 r128
snd_powermac           44960  0 
snd_pcm                85508  2 snd_pcm_oss,snd_powermac
snd_timer              22660  2 snd_seq,snd_pcm
snd                    61140  8 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_powermac,snd_pcm,snd_timer
soundcore               7012  1 snd
snd_page_alloc          9320  1 snd_pcm
i2c_dev                 8068  0 
pmac_zilog             18628  0 
serial_core            20960  1 pmac_zilog
ohci1394               36528  0 
ieee1394               92736  1 ohci1394
uninorth_agp            9804  1 
agpgart                34140  2 drm,uninorth_ag
Output of lspci:

Code: Select all

0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth FireWire (rev 01)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)
make.conf

Code: Select all

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CFLAGS="-O2 -mcpu=powerpc -mtune=powerpc -fno-strict-aliasing -pipe"
CXXFLAGS="${CFLAGS}"
# This should not be changed unless you know exactly what you are doing.  You
# should probably be using a different stage, instead.
CHOST="powerpc-unknown-linux-gnu"
GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo/"
SYNC="rsync://gentoo.chem.wisc.edu/"
USE="alsa X apache2 apm branding bzip2 cdr curl exif firefox gtk -qt3 -qt4 unicode dbus ha1 -gnome -kde startup-notification xscreensaver xvid tcl tcpd opengl dri offensive ncurses mplayer mpeg mp3 cups jpeg"
#
VIDEO_CARDS="r128"
INPUT_DEVI
Output of glxinfo:

Code: Select all

name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, 
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, 
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, 
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, 
    GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, 
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, 
    GL_ARB_texture_compression, GL_ARB_texture_cube_map, 
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine, 
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, 
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, 
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, 
    GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, 
    GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters, 
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, 
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, 
    GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture, 
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, 
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine, 
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, 
    GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, 
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels, 
    GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, 
    GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, 
    GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite, 
    GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program, 
    GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, 
    GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
I hope all this is not excessive. If other info is needed please let me know.

Thank you!
Yertman
Top
cyrillic
Watchman
Watchman
User avatar
Posts: 7311
Joined: Wed Feb 19, 2003 3:05 am
Location: Groton, Massachusetts USA

  • Quote

Post by cyrillic » Wed May 14, 2008 2:55 am

/var/log/Xorg.0.log wrote:(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
...
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
Instead of using 1024x768-24 , have you tried a mode that doesn't use as much memory, like 1024x768-16 or 800x600-24 ?
Top
Yertman
n00b
n00b
Posts: 4
Joined: Tue May 13, 2008 6:11 pm
Location: Southwest Wisconsin

G3 iMac Lower Depth?

  • Quote

Post by Yertman » Wed May 14, 2008 4:36 am

Hi,

This is a great idea. I tried setting the screen to a lower resolution using xrandr, but now that I think about it that's not the same thing as initializing X with different resolution or depth.

I have tried changing the default depth in my xorg.conf to 16, but then X is a mess. I have to switch the config back to 24 and kill then kill X from a differnt VT.

I also tried a different xorg.conf that had a screen section defined with different display subsections for different depths. With this I tried leaving the defaultdepth at 24 then made 640x480 the first mode in the display section for the default depth. Despite this X starts up at 1024x768-24!!!! The only thing I could find in the log file was something like no mode for this name? Using default 1024x768...

Anyhow. I feel pretty dumb asking this but how exactly would you change my xorg.conf to try different resolutions or color depths?

Thank you! You have give me hope. :)
Yertman


cyrillic wrote:
/var/log/Xorg.0.log wrote:(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
...
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
Instead of using 1024x768-24 , have you tried a mode that doesn't use as much memory, like 1024x768-16 or 800x600-24 ?
Top
nixnut
Bodhisattva
Bodhisattva
User avatar
Posts: 10974
Joined: Fri Apr 09, 2004 1:43 pm
Location: the dutch mountains

  • Quote

Post by nixnut » Wed May 14, 2008 1:15 pm

Moved from Desktop Environments to Gentoo on PPC.
Please add [solved] to the initial post's subject line if you feel your problem is resolved. Help answer the unanswered

talk is cheap. supply exceeds demand
Top
cyrillic
Watchman
Watchman
User avatar
Posts: 7311
Joined: Wed Feb 19, 2003 3:05 am
Location: Groton, Massachusetts USA

  • Quote

Post by cyrillic » Wed May 14, 2008 7:24 pm

I don't think switching modes on the fly works very well, unless you have a newer version of xorg-server.

Try this in your xorg.conf to see if things work ok. You might need to comment out the HorizSync, VertRefresh, and the ModeLine parts of your Monitor section, too.

Code: Select all

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultDepth  16

   SubSection "Display"
      Viewport   0 0
      Depth     16
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes     "800x600"
   EndSubSection
EndSection
Top
ddc
Guru
Guru
Posts: 521
Joined: Tue Aug 29, 2006 12:53 pm

Re: G3 iMac - I can't get 3D Acceleration - Please help.

  • Quote

Post by ddc » Thu May 15, 2008 8:01 am

# What is the DRI ?
# =================
# The technical description from the DRI website describes it as follows:
# The direct rendering infrastructure, also known as the DRI, is a framework for
# allowing direct access to graphics hardware in a safe and efficient manner.
# It includes changes to the X server, to several client libraries, and to the kernel.
# The first major use for the DRI is to create fast OpenGL implementations.
# What this means is that the DRI is a framework for allowing programs to speak directly
# to your graphics card.
# Graphics programs can send commands directly to your card and let it perform fast,
# hardware-accelerated rendering producing high-quality visuals. At the same time your
# CPU is free to do other work. This is known as direct rendering.
# Without the DRI programs have to perform the rendering using software. This ties up
# your CPU and results in much lower framerates since software is slower than hardware.
# This is know as indirect rendering.

# What is the GLX ?
# =================
# Accelerated Indirect GLX ("AIGLX") is an open source project founded by Red Hat and
# the Fedora community to allow accelerated indirect Open-GL rendering capabilities
# to X.org & DRI drivers. This allows the xorg-server to get fully hardware accelerated
# rendering over the GLX protocol; this is required for OpenGL compositing window
# managers (such as Compiz or Beryl) to function with hardware acceleration.
# The end result is that you can use GL effects on your desktop with very few changes
# (a slightly modified xorg.conf), the ability to turn it on and off at will, and you
# don't have to replace your X server in the process.
# AIGLX is included in xorg-server 7.1 and later.
# Cards Not Supported
# ATI: Rage 128. - Driver locking issue.
# ATI: Mach64. - No DRM support in Fedora, still insecure.


# what is Z Buffer ?
# ==================
# Z-buffering is an algorithm used in 3-D graphics to ensure that perspective works the
# same way in the virtual world as it does in the real one: a solid object in the
# foreground will block the view of one behind it. It works by testing pixel depth and
# comparing the current position (z coordinate) with stored data in a buffer (called a
# z-buffer ) that holds information about each pixel's last position. The pixel in the
# closer position to the viewer is the one that will be displayed, just as the person in
# front of the television is what the viewer sees rather than the screen. Z-buffering is
# one of three Visual Surface Determination (VSD) algorithms commonly used for this
# purpose. The other two, BSP trees and depth sorting, work with polygons and
# consequently are less effective for portrayal of movement and overlap. Since it works
# at the pixel level, z-buffering can be demanding in terms of memory and processing
# time. Nevertheless, its more complex and life-like simulation of real-world object
# dynamics ensures its continuing popularity as a 3-D graphics development tool.


# about ATI R128
# ==============
#
# 2. Features
#
# * Full support (including hardware accelerated 2D drawing) for 8, 15, 16, 24 bit pixel depths.
# * Hardware cursor support to reduce sprite flicker.
# * Support for high resolution video modes up to 1800x1440 @ 70Hz.
# * Support for doublescan video modes (e.g., 320x200 and 320x240).
# * Support for gamma correction at all pixel depths.
# * Fully programmable clock supported.
# * Robust text mode restore for VT switching.
#
# 5. Configuration
#
# The driver auto-detects all device information necessary to initialize
# thecard. The only lines you need in the "Device" section of your conf
#
# Section "Device"
# Identifier "Rage 128"
# Driver "r128"
# EndSection
#
# if you have problems with auto-detection, you can specify:
#
# * VideoRam - in kilobytes
# * MemBase - physical address of the linear framebuffer
# * IOBase - physical address of the memory mapped IO registers
# * ChipID - PCI DEVICE ID
#
# 6. Driver Options
#
# * "hw_cursor" - request hardware cursor (default)
# * "sw_cursor" - software cursor only
# * "no_accel" - software rendering only
# * "dac_8_bit" - use color weight 888 in 8 bpp mode (default)
# * "dac_6_bit" - use color weight 666 in 8 bpp mode (VGA emulation)



Section "Module"
# There are three methods of running acceleration:
# XGL, AIGLX, MESA
Load "extmod"
# DRI = Direct Rendering Infrastructure
# DRI is an X server extensions that allows "3d" acceleration
# calls to bypass the X server.
# This leads the term "Direct Rendering" as the calls are routed
# directly to the hardware
# This also leads to dramatic speed improvements/increases
# DRI is AIGLX's response to XGL. However, DRI provides the benefit that
# the entire screen is compositing as well.
# Loading this module is harmless unless it is enabled
Load "dri" # Direct Rendering Infrastructure
Load "dbe" # Double-Buffering Extension
Load "record" # ???
# The GLX module provides the hardware OpenGL extensions to the X server
# Through AIGLX, this loads the open source GLX
# GLX is a networked windowing system. Your client and your server
# might be on different machines. GLX packages up OpenGL commands into
# network packets, spits them across the X11 network pipe, then unpacks
# them at the other end. This lets you run accelerated 3D remotely:
# the client could be a simulation on a mainframe, the display could be
# your desktop machine in your office. GLX does a number of other X11
# related things that couldn't be packaged into OpenGL
Load "glx" # 3D layer, R128 has issues
# Load "/usr/X11R6/lib/modules/extensions/libglx.a"
# The freetype module completely replaces the "type1" module
Load "freetype"
## Load "i2c" ??
## Load "bitmap" ??
## Load "ddc" ??
## Load "int10" ??
## Load "vbe" ??
# Brian Paul wrote a free open-source implementation of OpenGL called
# Mesa. The name has no hidden meaning, it just sounds nice.
# The original versions of Mesa only did software rendering. Recent
# versions of Mesa have had accelerated backends for Glide, DRI, etc.
# The Mesa website is at http://www.mesa3d.org/.
# Load "GLcore" # Mesa software acceleration libraries
EndSection
[This file is cloned from VesaFB/matroxfb]

What is aty128fb?
=================

This is a driver for a graphic framebuffer for ATI Rage128 based devices
on Intel and PPC boxes.

Advantages:

* It provides a nice large console (128 cols + 48 lines with 1024x768)
without using tiny, unreadable fonts.
* You can run XF68_FBDev on top of /dev/fb0
* Most important: boot logo :-)

Disadvantages:

* graphic mode is slower than text mode... but you should not notice
if you use same resolution as you used in textmode.
* still experimental.


How to use it?
==============

Switching modes is done using the video=aty128fb:<resolution>... modedb
boot parameter or using `fbset' program.

See Documentation/fb/modedb.txt for more information on modedb
resolutions.

You should compile in both vgacon (to boot if you remove your Rage128 from
box) and aty128fb (for graphics mode). You should not compile-in vesafb
unless you have primary display on non-Rage128 VBE2.0 device (see
Documentation/fb/vesafb.txt for details).


X11
===

XF68_FBDev should generally work fine, but it is non-accelerated. As of
this document, 8 and 32bpp works fine. There have been palette issues
when switching from X to console and back to X. You will have to restart
X to fix this.


Configuration
=============

You can pass kernel command line options to vesafb with
`video=aty128fb:option1,option2:value2,option3' (multiple options should
be separated by comma, values are separated from options by `:').
Accepted options:

noaccel - do not use acceleration engine. It is default.
accel - use acceleration engine. Not finished.
vmode:x - chooses PowerMacintosh video mode <x>. Deprecated.
cmode:x - chooses PowerMacintosh colour mode <x>. Deprecated.
<XxX@X> - selects startup videomode. See modedb.txt for detailed
explanation. Default is 640x480x8bpp.


Limitations
===========

There are known and unknown bugs, features and misfeatures.
Currently there are following known bugs:
+ This driver is still experimental and is not finished. Too many
bugs/errata to list here.

--
Brad Douglas <brad@neruo.com>
Last edited by ddc on Thu May 15, 2008 6:35 pm, edited 1 time in total.
Top
JoseJX
Retired Dev
Retired Dev
Posts: 2774
Joined: Sun Apr 28, 2002 8:21 pm
Contact:
Contact JoseJX
Website

  • Quote

Post by JoseJX » Thu May 15, 2008 5:38 pm

This is really the important line from your log:
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
At the resolution and depth you gave it, it needs more than the 8 Mb of video memory you've got to do 3D. Your only choices are to use 16 bit or lower and have 3D support, or use 24 bit without it.

Sorry, but it's a hardware limitation!
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Top
Yertman
n00b
n00b
Posts: 4
Joined: Tue May 13, 2008 6:11 pm
Location: Southwest Wisconsin

  • Quote

Post by Yertman » Fri May 16, 2008 8:02 pm

Hello,

I tried you suggestion, but I can't get it to work. It seems no matter what I do the x server goes to 1024x768 at a depth of 24. I will have to post the output from the x server when I get a chance. It seems there is an error and it goes to the default setting, which is the setting mentioned above.

Interestingly, commenting out the HorizSync, VertRefresh, causes the x server to not come up at all - just get a black screen. When I have managed to get it to recognize a depth of 16 the display is corrupt, and I end up having to log in with ssh and kill the x server process, to get control of the system again.

Thanks for all your help thus far. I am learning a lot.
Yertman


cyrillic wrote:I don't think switching modes on the fly works very well, unless you have a newer version of xorg-server.

Try this in your xorg.conf to see if things work ok. You might need to comment out the HorizSync, VertRefresh, and the ModeLine parts of your Monitor section, too.

Code: Select all

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultDepth  16

   SubSection "Display"
      Viewport   0 0
      Depth     16
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes     "800x600"
   EndSubSection
EndSection
Top
JoseJX
Retired Dev
Retired Dev
Posts: 2774
Joined: Sun Apr 28, 2002 8:21 pm
Contact:
Contact JoseJX
Website

  • Quote

Post by JoseJX » Sat May 24, 2008 2:48 pm

If you can post the logs, it would really help!
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Top
Yertman
n00b
n00b
Posts: 4
Joined: Tue May 13, 2008 6:11 pm
Location: Southwest Wisconsin

/var/log/xorg.0.log when attempting 16 bit color

  • Quote

Post by Yertman » Mon Jun 02, 2008 5:32 am

JoseJX wrote:If you can post the logs, it would really help!
Hi,

I finally got a few minutes to try some of the things suggested here and post back with logs.

Here is my current xorg.conf with the default depth set to 16.

When I try this the xserver presents a corrupt display then crashes and send me to a text login after about 30 seconds.

Here is the xorg.conf

Code: Select all

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
       Load "extmod"
       Load "dri"
       Load "dbe"
       Load "record"
       Load "glx"
       Load "GLcore"
       Load "type1"
       Load "freetype"
       Load "xtrap"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
#	HorizSync    60-60
#	VertRefresh  75-117
 	HorizSync    58-62
        VertRefresh  75-117
	ModeLine "1024x768" 78.5 1024 1045 1141 1312 768 769 772 796 +hsync +vsync
	ModeLine "800x600" 62.4 800 813 893 1040 600 601 604 632 +hsync +vsync
	ModeLine "640x480" 49.9 640 653 717 832 480 481 484 514 +hsync +vsync
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"          "true" 	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "ForcePCIMode"     "true"    # [<bool>]
        #Option     "CCEPIOMode"         	# [<bool>]
        #Option     "CCENoSecurity"      	# [<bool>]
        #Option     "CCEusecTimeout"     	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "Display"            	# <str>
        #Option     "PanelWidth"         	# <i>
        #Option     "PanelHeight"        	# <i>
        #Option     "ProgramFPRegs"      	# [<bool>]
        #Option     "UseFBDev"         "false"   # [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "ShowCache"          	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
	Identifier  "Card0"
	Driver      "r128"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage 128 PR/PRO AGP 4x TMDS"
#       BusID       "PCI:0:10:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
        DefaultDepth 16
EndSection

Section "DRI"
Mode 0666
EndSection

# Section "Extensions"
# Option "Composite" "Enable"
# EndSection


And here is the log after I tried to use this config:

Code: Select all

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/iMac:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN 
Current Operating System: Linux iMac 2.6.24-gentoo-r3 #2 Sun Apr 13 22:43:09 CDT 2008 ppc
Build Date: 13 April 2008
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun  1 23:52:29 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open APM successful
(II) Loader magic: 0x101d6370
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5052 card 1002,5052 rev 00 class 03,80,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev 03 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0e:0: chip 106b,0018 card 0000,0000 rev 01 class 0c,00,10 hdr 00
(II) PCI: 20:0f:0: chip 106b,0021 card 0000,0000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0xf1000000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf5ffffff (0x1000000) MX[B]E
	[2] -1	0	0x80080000 - 0x800fffff (0x80000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0xffffffff (0x80000000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xf5000000 from 0xf5ffffff to 0xf51fffff
(II) PCI Memory resource overlap reduced 0x80080000 from 0x800fffff to 0x80080fff
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x8007ffff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[2] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.3.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 4.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 6.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro VR PR (PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/lib/xorg/modules/drivers//r128_drv.so
(WW) ****INVALID IO ALLOCATION**** b: 0xf0000400 e: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B]
	[19] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 16/16
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 0.0.2
	ABI class: X.Org Video Driver, version 1.2
(--) R128(0): Chipset: "ATI Rage 128 Pro VR PR (PCI)" (ChipID = 0x5052)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0xf1000000
(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
(**) R128(0): Using external CRT for display
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=7150
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Monitor0: Using hsync range of 58.00-62.00 kHz
(II) R128(0): Monitor0: Using vrefresh range of 75.00-117.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x175" (unknown reason)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x200" (unknown reason)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "360x200" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1280x960" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "832x624" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "416x312" (unknown reason)
(II) R128(0): Not using default mode "1152x768" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x384" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1600x1024" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x512" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): *Mode "1024x768": 78.5 MHz, 59.8 kHz, 75.2 Hz
(II) R128(0): Modeline "1024x768"   78.50  1024 1045 1141 1312  768 769 772 796 +hsync +vsync
(**) R128(0): *Mode "800x600": 62.4 MHz, 60.0 kHz, 94.9 Hz
(II) R128(0): Modeline "800x600"   62.40  800 813 893 1040  600 601 604 632 +hsync +vsync
(**) R128(0): *Mode "640x480": 49.9 MHz, 60.0 kHz, 116.7 Hz
(II) R128(0): Modeline "640x480"   49.90  640 653 717 832  480 481 484 514 +hsync +vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x90000000 - 0x90003fff (0x4000) MS[B]
	[1] 0	0	0x94000000 - 0x97ffffff (0x4000000) MS[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[7] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[8] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[9] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[10] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[11] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[13] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[17] 0	0	0xf0000400 - 0xf00004ff (0x100) IS[B]
	[18] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B](OprU)
	[22] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) R128(0): [drm] DRM interface version 1.3
(II) R128(0): [drm] created "r128" driver at busid "pci:0000:00:10.0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xc98e9000
(II) R128(0): [drm] mapped SAREA 0xc98e9000 to 0x4801f000
(II) R128(0): [drm] framebuffer handle = 0x94000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): [pci] 8192 kB allocated with handle 0x00000000
(II) R128(0): [pci] ring handle = 0xc9e01000
(II) R128(0): [pci] Ring mapped at 0x4884f000
(II) R128(0): [pci] Ring contents 0x00000000
(II) R128(0): [pci] ring read ptr handle = 0xc9f02000
(II) R128(0): [pci] Ring read ptr mapped at 0x48021000
(II) R128(0): [pci] Ring read ptr contents 0x00000000
(II) R128(0): [pci] vertex/indirect buffers handle = 0xc9f03000
(II) R128(0): [pci] Vertex/indirect buffers mapped at 0x48950000
(II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) R128(0): [drm] register handle = 0x90000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 1 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1024,3072)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 2302
(II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
(II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
(II) R128(0): Reserved depth span from (0,2306) offset 0x481000
(II) R128(0): Reserved 2048 kb for textures at offset 0x600000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		20 128x128 slots
		5 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 4614)
(II) R128(0): Largest offscreen area available: 1024 x 763
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(II) R128(0): [drm] removed 1 reserved context for kernel
(II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xc98e9000 at 0x4801f000
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.


Thanks again to everyone who has been trying to help me with this!

Have a great day!
Yertman
Top
Post Reply
10 posts • Page 1 of 1

Return to “Gentoo on PPC”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic