Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[alsa] Pas de son (ni d'erreur), avec un ALC662
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Mon Apr 21, 2008 8:54 pm    Post subject: [alsa] Pas de son (ni d'erreur), avec un ALC662 Reply with quote

Salut,
Après pas mal de problèmes, j'ai enfin un système qui fonctionne correctement, mais un problème persiste : le son.
J'ai un chipset "Intel HD audio" ALC662.
Au début, j'ai eu pas mal d'erreurs parce que je n'avais pas activé le bon module pour ma carte son dans le noyau, mais, j'ai fini par réussir, et j'ai pu suivre les étapes du manuel (alsaconf m'a correctement détecté ma carte son), donc tout à l'air de marcher, mais ma carte son ne fonctionne pas...
J'ai épluché pas mal de topics, j'ai essayé de rajouter des choses comme "options snd-hda-intel model=3stack" à la fin de /etc/modules.d/alsa, puis de rebooter, comme indiqué dans les topics parlant de ça, mais ça n'a rien changé...
Et pourtant, tout m'a l'air correct, et, sur kubuntu, ma carte son fonctionne.

Si ça peut vous être utile :

/etc/modules.d/alsa :
Code:
# Alsa kernel modules' configuration file.

# ALSA portion
# OSS/Free portion

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##

# OSS/Free portion - card #1
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.

# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.16 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---


lspci | grep Audio :
Code:
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)


lsmod :
Code:
Module                  Size  Used by
snd_seq                40880  0
snd_pcm_oss            33952  0
snd_mixer_oss          13440  1 snd_pcm_oss
snd_hda_intel         265756  0
snd_pcm                61060  2 snd_pcm_oss,snd_hda_intel
snd_timer              16900  2 snd_seq,snd_pcm
snd                    39012  6 snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
soundcore               6240  1 snd
snd_page_alloc          8072  2 snd_hda_intel,snd_pcm
ide_cd                 32160  0
i2c_i801                8336  0


et dans dmesg, j'ai trouvé ça :
Code:
hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...


Et voilà, si vous pouviez m'aider, ça m'aiderait :D, parce que là, je ne sais plus quoi faire...
Back to top
View user's profile Send private message
Biloute
Guru
Guru


Joined: 03 Apr 2008
Posts: 364
Location: LENS

PostPosted: Tue Apr 22, 2008 11:34 am    Post subject: Reply with quote

Je pense à une bétise mais à dire tout de même, est-ce que le son est muté (à vérifier dans alsamixer) parce que ç'est déjà arrivé.

Sinon, c'est peut etre au niveau des plugins, il y a une ligne importante à mettre dans le make.conf
Code:
ALSA_PCM_PLUGINS=" à remplir selon ta config "

_________________
Gentoo rocks
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 2:22 pm    Post subject: Reply with quote

Que renvoie zgrep CONFIG_SND_HDA /proc/config.gz et cat /proc/asound/version ?
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 2:53 pm    Post subject: Reply with quote

Non, le son n'est pas muté, d'ailleurs, amarok me dit que xine n'arrive pas à charger le pilote audio quand il démarre, ou que j'essaye de jouer une musique, donc ça ne vient pas de là.
ALSA_PCM_PLUGINS, j'ia pas trop compris à quoi ça sert, ni ce que je dois mettre, j'ai essayé avec une config trouvé sur un forum, de quelqu'un qui à aussi un HD adio qui fonctionne, ensuite, j'ai fait alsaconf, et, ô miracle, mes haut parleur ont fait un petit "tac" quand alsaconf m'a dit que mes haut parleurs était configurés, et tout, maisà part ce "tac", ça n'a rien changé.

cat /proc/asound/version renvoie :
Code:
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).


Et /proc/config.gz n'existe pas...

Par contre, si ça peut t'aider :
cat /usr/src/linux/.config | grep CONFIG_SND_HDA
Code:
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 2:55 pm    Post subject: Reply with quote

Il y a de nombreux changements entre la version 1.0.15 et 1.0.16 des pilotes ALSA pour les chipsets HDA.

Essaye avec un noyau récent (2.6.25) ou avec l'ebuild alsa-driver 1.0.16.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 3:35 pm    Post subject: Reply with quote

Euh, je veux bien mettre à jour le noyau, mais comment je fais :?
parce que si je fais "emerge --sync", puis "emerge -Dup world", il me dit qu'il n'y à pas de paquets ayant besoins d'une mise à jour...

EDIT: OU dois-je "démasquer" mm-sources, et l'installer ?
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 3:42 pm    Post subject: Reply with quote

Tu lis le Guide de mise à jour du noyau.

Sinon le noyau 2.6.25 est n'est pas encore dans la branche instable, il faut le démasquer.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr


Last edited by Desintegr on Tue Apr 22, 2008 3:43 pm; edited 1 time in total
Back to top
View user's profile Send private message
kwenspc
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 4954

PostPosted: Tue Apr 22, 2008 3:42 pm    Post subject: Reply with quote

C'est normal, que ce soit le kernel 2.6.25 et alsa-driver-1.0.16 ce sont des paquets masqués. À ta place je préfèrerait démasqué seulement alsa-driver-1.0.16 et zou.
_________________
membre officieux du SAV Ati GEntoo
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 3:44 pm    Post subject: Reply with quote

Je rajouterais que si tu utilises l'ebuild alsa-driver, il faut impérativement désactiver ALSA dans la configuration du noyau.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 3:47 pm    Post subject: Reply with quote

Ok.
Je dois aussi désactiver ALSA dans le noyau, je suppose ?

EDIT: oups, je fatigue...
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 4:19 pm    Post subject: Reply with quote

La compilation plante...
Code:
* ERROR: media-sound/alsa-driver-1.0.16 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 3919:  Called econf 'src_compile' 'src_compile' '--without-oss' '--without-debug' '--with-kernel=/usr/src/linux' '--with-build=/lib/modules/2.6.24-gentoo-r4/build' '--with-isapnp=yes'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *                      die "econf failed"
 *  The die message:
 *   econf failed
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 4:20 pm    Post subject: Reply with quote

Si tu ne donnes que ça comme log de compilation, on ne peut rien faire pour toi.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 4:26 pm    Post subject: Reply with quote

Code:
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/2.6.24-gentoo-r4/build
 * Found sources for kernel version:
 *     2.6.24-gentoo-r4
 * Checking for suitable kernel configuration options...
  [ ok ]
>>> Unpacking source...
>>> Unpacking alsa-driver-1.0.16.tar.bz2 to /var/tmp/portage/media-sound/alsa-driver-1.0.16/work
 * Converting alsa-driver-1.0.16/Makefile to use M= instead of SUBDIRS= ...
  [ ok ]
 * Running autoconf ...
  [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/media-sound/alsa-driver-1.0.16/work/alsa-driver-1.0.16 ...
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --without-oss --without-debug --with-kernel=/usr/src/linux --with-build=/lib/modules/2.6.24-gentoo-r4/build --with-isapnp=yes --with-sequencer --with-cards= ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci --build=i686-pc-linux-gnu
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i686-pc-linux-gnu-gcc accepts -g... yes
checking for i686-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-gnu-ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether i686-pc-linux-gnu-gcc needs -traditional... no
checking for current directory... /var/tmp/portage/media-sound/alsa-driver-1.0.16/work/alsa-driver-1.0.16
checking cross compile...
checking for directory with kernel source... /usr/src/linux
checking for directory with kernel build... /lib/modules/2.6.24-gentoo-r4/build
checking for kernel linux/version.h... yes
checking for kernel linux/autoconf.h... yes
checking for kernel version... 2.6.24-gentoo-r4
checking for GCC version... Kernel compiler: gcc 4.1.2 (Gentoo 4.1.2 p1.1) Used compiler: i686-pc-linux-gnu-gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.1)
checking for built-in ALSA... no
checking for existing ALSA module... no
checking for Red Hat kernel... auto
checking for Red Hat kernel... no
checking for SUSE kernel... auto
checking for SUSE kernel... no
checking for CONFIG_EXPERIMENTAL... yes
checking for kernel linux/config.h... no
Creating <linux/config.h>...
checking to modify of kernel linux/kmod.h... no
checking for kernel linux/utsrelease.h... yes
checking for kernel linux/compiler.h... yes
checking for kernel linux/pm.h... yes
checking for kernel linux/spinlock.h... yes
checking for kernel linux/irq.h... yes
checking for kernel linux/threads.h... yes
checking for kernel linux/rwsem.h... yes
checking for kernel linux/gameport.h... yes
checking for kernel media/v4l2-dev.h... yes
checking for kernel linux/devfs_fs_kernel.h... no
Creating a dummy <linux/devfs_fs_kernel.h>...
checking for kernel linux/highmem.h... yes
checking for kernel linux/workqueue.h... yes
checking for kernel linux/dma-mapping.h... yes
checking for kernel asm/hw_irq.h... yes
checking for kernel linux/device.h... yes
checking for kernel linux/platform_device.h... yes
checking for kernel linux/isa.h... yes
checking for kernel linux/jiffies.h... yes
checking for kernel linux/compat.h... yes
checking for kernel linux/log2.h... yes
checking for kernel linux/adb.h... yes
checking for kernel linux/cuda.h... yes
checking for kernel linux/pmu.h... yes
checking for kernel linux/moduleparam.h... yes
checking for kernel linux/syscalls.h... yes
checking for kernel linux/firmware.h... yes
checking for kernel linux/err.h... yes
checking for kernel linux/bitmap.h... yes
checking for kernel linux/mutex.h... yes
checking for kernel linux/latency.h... yes
checking for kernel linux/kthread.h... yes
checking for kernel asm/irq_regs.h... yes
checking for kernel linux/seq_file.h... yes
checking for kernel module symbol versions... no
checking for has ioport support... yes
checking for PCI support in kernel... yes
checking for I2C driver in kernel... yes
checking for I2C_POWERMAC in kernel... unknown
checking for firmware loader... module
checking for input subsystem in kernel... yes
checking for directory to store kernel modules... /lib/modules/2.6.24-gentoo-r4/kernel/sound
checking for verbose procfs... on
checking for verbose printk... on
checking for debug level... none
checking for ISA support in kernel... no
checking for processor type... i686
checking for i386 machine type... default
checking for ISA DMA API... yes
checking for SMP... yes
checking for Video device support in kernel... no
checking for ISA PnP driver in kernel... yes
checking for PnP driver in kernel... yes
checking for Kernel ISA-PnP support... no
checking for Kernel ISA-PnP module support... no
checking for strlcpy... yes
checking for snprintf... yes
checking for vsnprintf... yes
checking for scnprintf... yes
checking for sscanf... yes
checking for vmalloc_to_page... yes
checking for old kmod... no
checking for PDE... yes
checking for pci_set_consistent_dma_mask... yes
checking for pci_dev_present... yes
checking for msleep... yes
checking for msleep_interrupt... yes
checking for msecs_to_jiffies... yes
checking for tty->count is the atomic type... no
checking for io_remap_pfn_range... yes
checking for kcalloc... yes
checking for kstrdup... yes
checking for kzalloc... yes
checking for create_workqueue with flags... no
checking for saved_config_space in pci_dev... yes
checking for new pci_save_state... yes
checking for register_sound_special_device... yes
checking for driver version... 1.0.16
checking for sequencer support... yes
checking for OSS/Free emulation... no
checking for RTC callback support in kernel... yes
checking for HPET support... no
checking for dynamic minor numbers... no
checking for support of old API... yes
checking for Procfs support... yes
checking for USB support... no
checking for USB module support... no
checking for class_simple... no
checking for old driver suspend/resume callbacks... no
checking for removal of page-reservation for nopage/mmap... yes
checking for nested class_device... yes
checking for new IRQ handler... yes
checking for gfp_t... yes
checking for PnP suspend/resume... yes
checking for new unlocked/compat_ioctl... yes
checking for x86-compatible PC... yes
checking for High-Res timers... no
checking for kernel PCMCIA
checking for PCMCIA support... no
checking for PCMCIA module support... no
checking for PC9800 support in kernel... no
checking for parallel port support... no
checking for parallel port module support... no
checking for power management... yes
checking for CONFIG_HAS_DMA... yes
checking for which soundcards to compile driver for... configure: error: Unsupported soundcard usb-audio

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/media-sound/alsa-driver-1.0.16/work/alsa-driver-1.0.16/config.log
 *
 * ERROR: media-sound/alsa-driver-1.0.16 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 3919:  Called econf 'src_compile' 'src_compile' '--without-oss' '--without-debug' '--with-kernel=/usr/src/linux' '--with-build=/lib/modules/2.6.24-gentoo-r4/build' '--with-isapnp=yes'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *  The die message:
 *   econf failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/media-sound/alsa-driver-1.0.16/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/media-sound/alsa-driver-1.0.16/temp/environment'.
 *

Voilà, tu as aussi besoin de "environnement" ?
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 4:30 pm    Post subject: Reply with quote

Compile uniquement avec hda-intel pour la variable ALSA_CARDS.
Ça ne sert à rien de compiler le support pour les autres cartes.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 4:38 pm    Post subject: Reply with quote

J'ai compilé, redémarré, et ça me fait exactement pareil qu'avant...

lsmod :
Code:
Module                  Size  Used by
snd_seq                35248  0
snd_hda_intel         262040  2
snd_pcm                47492  1 snd_hda_intel
snd_timer              14084  2 snd_seq,snd_pcm
snd_page_alloc          6792  2 snd_hda_intel,snd_pcm
snd_hwdep               5636  1 snd_hda_intel
snd                    28084  9 snd_seq,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore               6240  1 snd
ide_cd                 32160  0
i2c_i801                8336  0
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 4:43 pm    Post subject: Reply with quote

Que renvoient dmesg et cat /proc/asound/version ?
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 4:45 pm    Post subject: Reply with quote

dmesg :
Code:
Linux version 2.6.24-gentoo-r4 (root@palkeo) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #14 SMP Tue Apr 22 16:29:00 CEST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
 BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
 BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
 BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
 BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1141MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5170
Entering add_active_range(0, 0, 521696) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   521696
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   521696
On node 0 totalpages: 521696
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2283 pages used for memmap
  HighMem zone: 290037 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000F6B20, 0014 (r0 GBT   )
ACPI: RSDT 7F5E3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: FACP 7F5E30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: DSDT 7F5E3180, 5272 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
ACPI: FACS 7F5E0000, 0040
ACPI: HPET 7F5E8540, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
ACPI: MCFG 7F5E85C0, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: APIC 7F5E8440, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: SSDT 7F5E8640, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
ACPI: SSDT 7F5E8AD0, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7f600000:50a00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517621
Kernel command line: root=/dev/sda1
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1800.044 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2065456k/2086784k available (1776k kernel code, 20184k reserved, 742k data, 196k init, 1169280k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc037b000 - 0xc03ac000   ( 196 kB)
      .data : 0xc02bc370 - 0xc0375c04   ( 742 kB)
      .text : 0xc0100000 - 0xc02bc370   (1776 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3602.93 BogoMIPS (lpj=7205868)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3600.17 BogoMIPS (lpj=7200345)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
CPU1: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d
Total of 2 processors activated (7203.10 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x290-0x29f has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:0b: ioport range 0x400-0x4bf could not be reserved
system 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
system 00:0d: iomem range 0xcb400-0xcbfff has been reserved
system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
system 00:0d: iomem range 0x7f5e0000-0x7f5fffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0x7f5dffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0d: iomem range 0xfed10000-0xfed1dfff could not be reserved
system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: a000-afff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: c000-cfff
  MEM window: f0000000-f0ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: d000-dfff
  MEM window: f1000000-f2ffffff
  PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:00:1e.0
  IO window: b000-bfff
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
Linux agpgart interface v0.102
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 7164K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F5E8A40, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
r8169 0000:03:00.0: no MSI. Back to INTx.
eth0: RTL8168b/8111b at 0xf8820000, 00:1d:7d:a1:1f:f1, XID 38000000 IRQ 17
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
JMB: IDE controller (0x197b:0x2368 rev 0x00) at  PCI slot 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
JMB: 100% native mode on irq 16
    ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: SAMSUNG CD-ROM SH-152A, ATAPI CD/DVD-ROM drive
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0xc000-0xc007,0xc102 on irq 16
Probing IDE interface ide1...
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: HPA detected: current 488395055, native 488397168
ata1.00: ATA-7: Hitachi HDT725025VLA380, V5DOA7EA, max UDMA/133
ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 18
ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 18
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 19
hdb: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Unable to find swap-space signature
r8169: eth0: link up
r8169: eth0: link up



cat /proc/asound/version
Code:
Advanced Linux Sound Architecture Driver Version 1.0.16.
Compiled on Apr 22 2008 for kernel 2.6.24-gentoo-r4 (SMP).
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 4:55 pm    Post subject: Reply with quote

C'est quoi le modèle du portable ?

Sinon tu peux essayer comme option de model pour le module :
- 3stack-dig
- 3stack-6ch-dig
- 3stack-6ch
- 6stack-dig
- lenovo-101e
- eeepc-p701
- eeepc-ep20
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 4:59 pm    Post subject: Reply with quote

C'est pas un portable...
Ma carte mère est une GA-G33M-S2L.

Et pour model, j'ai déjà essayé 3stack-dig et 3stack.

Il y à moyen de tester sans rebooter ?
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 5:02 pm    Post subject: Reply with quote

Décharger les modules et recharger avec la nouvelle option en utilisant modprobe.
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 5:11 pm    Post subject: Reply with quote

En y repensant, tu as vérifié quand même (avant de changer les model) dans alsamixer que le son n'était pas en mute et que les volumes étaient bien réglés (master ou front, PCM) ?
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 5:19 pm    Post subject: Reply with quote

Oui, mais je viens de faire une découverte : j'ai été sur youtube, et pour toutes les vidéos, le son marche !!!
Par contre, avec amarok, vlc, et le centre de controle de KDE, le son ne fonctionne pas...
Back to top
View user's profile Send private message
Biloute
Guru
Guru


Joined: 03 Apr 2008
Posts: 364
Location: LENS

PostPosted: Tue Apr 22, 2008 6:02 pm    Post subject: Reply with quote

Essaye de lancer un mp3 avec mplayer en console (mplayer est trés bavard sinon essaye avec vlc pour voir) et regarde les messages d'erreur.
Si tu as quelque chose du genre
Code:
[AO_ALSA] alsa-lib: dlmisc.c:118:(snd_dlsym_verify) unable to verify version for symbol _snd_pcm_empty_open

C'est un problème de plugin

Pour les plugins il n'y a pas grand chose à comprendre moi j'ai mis tout les plugins sinon faut passer des heures à trier.

Essaye un
Code:
# emerge -1 alsa-lib
[ebuild   R   ] media-libs/alsa-lib-1.0.16  USE="midi -alisp -debug -doc" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol"

_________________
Gentoo rocks
Back to top
View user's profile Send private message
palkeo
n00b
n00b


Joined: 14 Apr 2008
Posts: 61

PostPosted: Tue Apr 22, 2008 7:14 pm    Post subject: Reply with quote

Apparemment, ça n'est pas un problème de plugin...
Voiçi ce qu'il me met :
Code:
==========================================================================
Ouverture décodeur audio : [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 64.0 kbit/4.54% (ratio: 8000->176400)
Codec audio sélectionné : [mp3] afm : mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
[AO_ALSA] alsa-lib: pcm_dmix.c:963:(snd_pcm_dmix_open) unable to create IPC semaphore
[AO_ALSA] Erreur ouverture de lecture : Function not implemented
[AO ESD] Echec de esd_open_sound : No such file or directory
[AO SDL] Échantillonnage : 44100Hz Canaux : Stereo Format s16le
[AO_ALSA] alsa-lib: pcm_dmix.c:963:(snd_pcm_dmix_open) unable to create IPC semaphore
[AO SDL] Impossible ouvrir audio : No available audio device
DVB card number must be between 1 and 4
AO: [null] 44100Hz 2ch s16le (2 bytes per sample)
Vidéo : pas de vidéo
Démarre la lecture...
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Tue Apr 22, 2008 8:13 pm    Post subject: Reply with quote

Ton user est-il bien dans le groupe audio ?

Que renvoie mount | grep shm, ipcs -a et whoami ?
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum