| View previous topic :: View next topic |
| Author |
Message |
mjf55
Guru
Joined: 25 Aug 2007
Posts: 372
|
 Posted: Tue Mar 11, 2008 2:03 am Post subject: SD-card not recognized |
 |
|
I am having a devil of a time getting my system to read a Kingston SD/MMC card on a usb connector.
I have read, search and compiled everything I can think of.
Data gathered by booting WITHOUT the key/SD/MMC and then plugging it in.
Second time resulted in the bottom data where it appeared, but cound not be accessed.
Please help.
Linux willwe 2.6.22-gentoo-r9 #1 SMP Mon Mar 10 19:16:02 EDT 2008 i686 Intel(R) Pentium(R) M processor 1.60GHz GenuineIntel GNU/Linux
No mmc* or sd* in /dev
Output from dmesg | Code: |
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
|
Output from messages | Code: |
Mar 10 21:32:30 willwe usb 1-3: new high speed USB device using ehci_hcd and address 3
Mar 10 21:32:30 willwe usb 1-3: configuration #1 chosen from 1 choice
Mar 10 21:32:30 willwe scsi0 : SCSI emulation for USB Mass Storage devices
Mar 10 21:32:30 willwe usb-storage: device found at 3
Mar 10 21:32:30 willwe usb-storage: waiting for device to settle before scanning
Mar 10 21:32:36 willwe usb-storage: device scan complete
Mar 10 21:32:42 willwe usb 1-3: reset high speed USB device using ehci_hcd and address 3
Mar 10 21:32:57 willwe usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
Mar 10 21:32:57 willwe usb 1-3: USB disconnect, address 3
Mar 10 21:32:57 willwe scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery
Mar 10 21:32:57 willwe usb 1-3: new high speed USB device using ehci_hcd and address 4
Mar 10 21:33:12 willwe usb 1-3: device descriptor read/64, error -110
Mar 10 21:33:13 willwe usb 1-3: configuration #1 chosen from 1 choice
Mar 10 21:33:13 willwe scsi1 : SCSI emulation for USB Mass Storage devices
Mar 10 21:33:13 willwe usb-storage: device found at 4
Mar 10 21:33:13 willwe usb-storage: waiting for device to settle before scanning
Mar 10 21:33:19 willwe usb-storage: device scan complete
Mar 10 21:33:25 willwe usb 1-3: reset high speed USB device using ehci_hcd and address 4
Mar 10 21:33:40 willwe usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
Mar 10 21:33:40 willwe usb 1-3: USB disconnect, address 4
Mar 10 21:33:40 willwe scsi 1:0:0:0: scsi: Device offlined - not ready after error recovery
Mar 10 21:33:40 willwe usb 1-3: new high speed USB device using ehci_hcd and address 5
Mar 10 21:33:55 willwe usb 1-3: device descriptor read/64, error -110
Mar 10 21:33:56 willwe usb 1-3: configuration #1 chosen from 1 choice
Mar 10 21:33:56 willwe scsi2 : SCSI emulation for USB Mass Storage devices
Mar 10 21:33:56 willwe usb-storage: device found at 5
Mar 10 21:33:56 willwe usb-storage: waiting for device to settle before scanning
Mar 10 21:34:02 willwe usb-storage: device scan complete
Mar 10 21:34:08 willwe usb 1-3: reset high speed USB device using ehci_hcd and address 5
Mar 10 21:34:23 willwe usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
Mar 10 21:34:23 willwe usb 1-3: USB disconnect, address 5
Mar 10 21:34:23 willwe scsi 2:0:0:0: scsi: Device offlined - not ready after error recovery
Mar 10 21:34:23 willwe usb 1-3: new high speed USB device using ehci_hcd and address 6
Mar 10 21:34:38 willwe usb 1-3: device descriptor read/64, error -110
Mar 10 21:34:39 willwe usb 1-3: configuration #1 chosen from 1 choice
Mar 10 21:34:39 willwe scsi3 : SCSI emulation for USB Mass Storage devices
Mar 10 21:34:39 willwe usb-storage: device found at 6
Mar 10 21:34:39 willwe usb-storage: waiting for device to settle before scanning
Mar 10 21:34:45 willwe usb-storage: device scan complete
Mar 10 21:34:51 willwe usb 1-3: reset high speed USB device using ehci_hcd and address 6
Mar 10 21:35:06 willwe usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
Mar 10 21:35:06 willwe usb 1-3: USB disconnect, address 6
Mar 10 21:35:06 willwe scsi 3:0:0:0: scsi: Device offlined - not ready after error recovery
Mar 10 21:35:06 willwe usb 1-3: new high speed USB device using ehci_hcd and address 7
Mar 10 21:35:21 willwe usb 1-3: device descriptor read/64, error -110
Mar 10 21:35:22 willwe usb 1-3: configuration #1 chosen from 1 choice
Mar 10 21:35:22 willwe scsi4 : SCSI emulation for USB Mass Storage devices
Mar 10 21:35:22 willwe usb-storage: device found at 7
Mar 10 21:35:22 willwe usb-storage: waiting for device to settle before scanning
Mar 10 21:35:28 willwe usb-storage: device scan complete
Mar 10 21:35:34 willwe usb 1-3: reset high speed USB device using ehci_hcd and address 7
Mar 10 21:35:49 willwe usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
Mar 10 21:35:49 willwe usb 1-3: USB disconnect, address 7
Mar 10 21:35:49 willwe scsi 4:0:0:0: scsi: Device offlined - not ready after error recovery
Mar 10 21:35:49 willwe usb 1-3: new high speed USB device using ehci_hcd and address 8
|
Output of lsusb | Code: |
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 062a:0001 Creative Labs Notebook Optical Mouse
Bus 002 Device 001: ID 0000:0000
|
Kernel Config: cat /usr/src/linux/.config | grep MMC | Code: |
cat /usr/src/linux/.config | grep MMC
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_MMCONFIG=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# MMC/SD Card Drivers
CONFIG_MMC_BLOCK=y
# MMC/SD Host Controller Drivers
CONFIG_MMC_SDHCI=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
|
Rare Instance of it appearing
lsusb: | Code: | Bus 001 Device 028: ID 090c:6000 Feiya Technology Corp.
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 062a:0001 Creative Labs Notebook Optical Mouse
Bus 002 Device 001: ID 0000:0000
|
dmesg: | Code: | usb 1-3: reset high speed USB device using ehci_hcd and address 3
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 3
scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 4
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 4
scsi 1:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 5
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 5
scsi 2:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 6
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 6
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 6
scsi 3:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 7
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
----------------------- [b]goes from 4 - 20 just like all the others[/b]----------------------
scsi 21:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 25
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi22 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 25
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 25
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 25
scsi 22:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 26
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi23 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 26
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 26
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 26
scsi 23:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 27
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi24 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 27
usb-storage: waiting for device to settle before scanning
usb 1-3: USB disconnect, address 27
usb-storage: device scan complete
usb 1-3: new high speed USB device using ehci_hcd and address 28
usb 1-3: configuration #1 chosen from 1 choice
scsi25 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 28
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 28
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 28
scsi 25:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 29
usb 1-3: device descriptor read/64, error -110
usb 1-3: configuration #1 chosen from 1 choice
scsi26 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 29
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3: reset high speed USB device using ehci_hcd and address 29
usb 1-3: failed to restore interface 0 altsetting 0 (error=-110)
usb 1-3: USB disconnect, address 29
scsi 26:0:0:0: scsi: Device offlined - not ready after error recovery
usb 1-3: new high speed USB device using ehci_hcd and address 30
|
EDIT- 3/14 - changed subject line
_________________
Mark
No longer a n00b, but still a 'Kool Kid' wannabe
Last edited by mjf55 on Fri Mar 14, 2008 4:55 pm; edited 1 time in total |
|
| Back to top |
|
 |
einheitlix
Tux's lil' helper
Joined: 03 Aug 2004
Posts: 144
Location: Saarbrücken, Germany
|
| Posted: Tue Mar 11, 2008 12:12 pm Post subject: |
|
|
I had a similar problem once with a USB stick and it turned out the stick had a defect... have you eliminated the possibility that it is a hardware defect? It could be the card itself, or the card reader, or the usb connector. I would try to mount it with another system (e.g. an Ubuntu live cd) just to see if it works. If it does, your problem lies elsewhere. If it doesn't, I'd try to find another computer with another card reader to see if it's your hardware or your MMC/SD card itself (i.e., if it works on another box, then it must be your hardware, otherwise it's the card...). If it's your hardware, try another card reader, or another usb connector if you haven't already...
_________________
Collecting data is only the first step toward wisdom. But sharing data is the first step toward community. |
|
| Back to top |
|
|
mjf55
Guru
Joined: 25 Aug 2007
Posts: 372
|
| Posted: Tue Mar 11, 2008 3:51 pm Post subject: |
|
|
einheitlix,
thanks for your response. I tested the SD/MMC key on a windows machine and it performed correctly, so it is not a hardware problem.
_________________
Mark
No longer a n00b, but still a 'Kool Kid' wannabe |
|
| Back to top |
|
|
mjf55
Guru
Joined: 25 Aug 2007
Posts: 372
|
| Posted: Fri Mar 14, 2008 5:00 pm Post subject: |
|
|
Sorry, bumping because I need help and I changed the subject line to clarify.
_________________
Mark
No longer a n00b, but still a 'Kool Kid' wannabe |
|
| Back to top |
|
|
barbar
Guru
Joined: 16 Apr 2003
Posts: 397
Location: Austria
|
| Posted: Fri Mar 14, 2008 5:13 pm Post subject: |
|
|
Not sure if this helps, but have you tried not to use | Code: | USB selective suspend/resume and wakeup (EXPERIMENTAL)
in kernel .config-> Device Drivers->USB Support |
Although it worked for my built in Card Reader I found out that your problem might be a problem with power supply. (http://forums.fedoraforum.org/printthread.php?t=182049)
It might also help using the card reader on a different usb port.
Do you connect the reader via a hub or is it directly connected to your computer ? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
