Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
net.eth0 [risolto]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Sun Mar 02, 2008 8:20 pm    Post subject: net.eth0 [risolto] Reply with quote

salve, all'avvio come errore trovo che il sistema non trova il file /net/iproute2.sh...
non c'è il file, però non so come ovviare
siccome poi non parte la scheda di rete non so come fare
cosa potrebbe essere?e come risolvo?
grazie mille
_________________
manang


Last edited by manang on Mon Mar 03, 2008 4:11 pm; edited 1 time in total
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....

PostPosted: Sun Mar 02, 2008 9:35 pm    Post subject: Re: net.eth0 Reply with quote

manang wrote:
salve, all'avvio come errore trovo che il sistema non trova il file /net/iproute2.sh...
non c'è il file, però non so come ovviare
siccome poi non parte la scheda di rete non so come fare
cosa potrebbe essere?e come risolvo?
grazie mille


magari puoi iniziare con postare l'errore preciso, sennò ci viene un tantino difficile capire....

ciauz
_________________
se fossi un disegnatore ti disegnerei, se fossi uno scrittore ti scriverei, se fossi un inventore ti inventerei...ma sono solo un trombettista!!!
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Sun Mar 02, 2008 9:37 pm    Post subject: Reply with quote

mi dite precisamente quale output volete?
grazie mille
_________________
manang
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Sun Mar 02, 2008 9:46 pm    Post subject: Reply with quote

Code:

Linux version 2.6.22-gentoo-r10 (root@natta) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) #2 PREEMPT Sun Jan 13 14:18:58 CET 2008
Command line: noapic
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005ffb0000 (usable)
 BIOS-e820: 000000005ffb0000 - 000000005ffc0000 (ACPI data)
 BIOS-e820: 000000005ffc0000 - 000000005fff0000 (ACPI NVS)
 BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 393136) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F9D10, 0014 (r0 ACPIAM)
ACPI: RSDT 5FFB0000, 0034 (r1 A M I  OEMRSDT  11000530 MSFT       97)
ACPI: FACP 5FFB0200, 0084 (r2 A M I  OEMFACP  11000530 MSFT       97)
ACPI: DSDT 5FFB0430, 395B (r1  93956 93956131      131 INTL  2002026)
ACPI: FACS 5FFC0000, 0040
ACPI: APIC 5FFB0390, 005C (r1 A M I  OEMAPIC  11000530 MSFT       97)
ACPI: MCFG 5FFB03F0, 003C (r1 A M I  OEMMCFG  11000530 MSFT       97)
ACPI: OEMB 5FFC0040, 0056 (r1 A M I  AMI_OEM  11000530 MSFT       97)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 393136) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   393136
On node 0 totalpages: 393039
  DMA zone: 56 pages used for memmap
  DMA zone: 1035 pages reserved
  DMA zone: 2908 pages, LIFO batch:0
  DMA32 zone: 5318 pages used for memmap
  DMA32 zone: 383722 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: ETEMPLATE    MPTABLE: APIC at: 0xFEE00000
I/O APIC #1 at 0xFEC00000.
Setting APIC routing to flat
Processors: 1
Allocating PCI resources starting at 70000000 (gap: 60000000:9ffc0000)
Built 1 zonelists.  Total pages: 386630
Kernel command line: noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2000.078 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 4160000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1542984k/1572544k available (2531k kernel code, 28812k reserved, 1050k data, 208k init)
Calibrating delay using timer specific routine.. 4000.90 BogoMIPS (lpj=2000452)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c28)
Using local APIC timer interrupts.
result 12500486
Detected 12.500 MHz APIC timer.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Time: tsc clocksource has been installed.
ACPI: RTC can wake from S4
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:09: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:09: iomem range 0xfffc0000-0xffffffff could not be reserved
pnp: 00:0b: ioport range 0x290-0x291 has been reserved
pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved
pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved
pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved
pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0c: iomem range 0x100000-0x5fffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: a000-cfff
  MEM window: ffd00000-ffdfffff
  PREFETCH window: bff00000-dfefffff
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1204487390.150:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W DEBUG].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
sata_sis 0000:00:05.0: version 0.8
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
scsi0 : sata_sis
scsi1 : sata_sis
ata1: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 5
ata2: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 5
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6Y120M0, YAR51HW0, max UDMA/133
ata1.00: 240121728 sectors, multi 16: LBA
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 1 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
pata_sis 0000:00:02.5: version 0.5.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
scsi2 : pata_sis
scsi3 : pata_sis
ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
ata3.00: ATAPI: _NEC DVD_RW ND-4550A, 1.06, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.06 PQ: 0 ANSI: 5
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Bluetooth: Virtual HCI driver ver 1.2
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k freed
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Read MAC address from APC.
0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
0000:00:04.0: Using transceiver at address 1 as default.
0000:00:04.0: SiS 190 PCI Fast Ethernet adapter at ffffc2000000cc00 (IRQ: 5), 00:13:8f:42:4e:0a
eth0: GMII mode.
eth0: Enabling Auto-negotiation.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1403 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.45.4 [Jan 16 2008] on minor 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 5, io mem 0xffefc000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 5, io mem 0xffefd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.2: irq 3, io mem 0xffefe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 5, io mem 0xffeff000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 50735 usecs
intel8x0: clocking to 48000
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /class/input/input1
input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:03.0-1
input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /class/input/input2
input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:03.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
/var/tmp/portage/media-video/gspcav1-20070508/work/gspcav1-20070508/gspca_core.c: USB GSPCA camera found.Sunplus FW 2
/var/tmp/portage/media-video/gspcav1-20070508/work/gspcav1-20070508/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG
/var/tmp/portage/media-video/gspcav1-20070508/work/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 464 maxh 480 minw 176 minh 144
usbcore: registered new interface driver gspca
/var/tmp/portage/media-video/gspcav1-20070508/work/gspcav1-20070508/gspca_core.c: gspca driver 01.00.18 registered
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
EXT3 FS on sda3, internal journal
w83627hf: Found W83697HF chip at 0x290
fuse init (API version 7.8)
fuse distribution version: 2.7.2
Adding 1036184k swap on /dev/sda4.  Priority:-1 extents:1 across:1036184k
spurious 8259A interrupt: IRQ7.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[fglrx] Reserve Block - 1 offset =  0X7fc0000 length = 0X40000
[fglrx] interrupt source 20008000 successfully enabled
[fglrx] enable ID = 0x00000004
[fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000005
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000



questo è il mio dmesg...ciao
_________________
manang
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4654
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Sun Mar 02, 2008 10:36 pm    Post subject: Reply with quote

nel tuo dmesg non c'è traccia dell'errore che dici, ma appare piuttosto la presenza di una scheda di rete SIS 190 PCI funzionante sul dispostivo eth0.

prova postare l'output di ip addr oppure di ifconfig eth0.
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Sun Mar 02, 2008 11:32 pm    Post subject: Reply with quote

allora riavviando il sistema leggo questi errori:
Code:
/etc/init.d/net.eth0
 line 253: cd :/net: nosuch file directory
ls: impossibile accedere a *.sh
no such file or directory
/etc/init.d/net.eth0 line 329 bash_variable command not fount
no interface module has been loaded
Error net.eth0 failed to start


starting lo
   /net/iproute.sh does not exist
error net.lo failed to start


se mi passate net.eth0 e net.lo dite che risolvo?
inotre gli output di ip addr e ifconfig eth0 sono:
Code:

1: lo: <LOOPBACK> mtu 16436 qdisc noop
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 00:13:8f:42:4e:0a brd ff:ff:ff:ff:ff:ff


e
Code:
eth0      Link encap:Ethernet  HWaddr 00:13:8F:42:4E:0A 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:5 Base address:0xdead



grazie mille
_________________
manang
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Mon Mar 03, 2008 2:46 am    Post subject: Reply with quote

in net.eth0 trovo queste righe
# Define where our modules are
MODULES_DIR="${svclib}/net"

possibile che svclib non indichi la directory del modulo e quindi mi crea problemi?
come faccio a dire che deve puntarmi al punto giusto?
grazie mille
_________________
manang
Back to top
View user's profile Send private message
HoX
Guru
Guru


Joined: 11 Nov 2006
Posts: 385

PostPosted: Mon Mar 03, 2008 7:37 am    Post subject: Reply with quote

manang wrote:
in net.eth0 trovo queste righe
# Define where our modules are
MODULES_DIR="${svclib}/net"

possibile che svclib non indichi la directory del modulo e quindi mi crea problemi?
come faccio a dire che deve puntarmi al punto giusto?
grazie mille


Sicuramente il problema è quello. Infatti in / (root) non c'è nessuna cartella che si chiama net.
svclib dovrebbe essere /lib/rc (o almeno è questa sul mio sistema).
Per il momento ti suggerisco di forzare questa cartella (verifica che sia giusta con locate "/net/iproute") all'interno del file net.eth0.
poi cerca di capire da dove arriva il problema e risolvilo in modo pulito, perchè quello sopra è un semplice workaround
_________________
"Always code as if the guy who ends up maintaining your code will be a violent psychopath who knows where you live." -- Damian Conway

Proudly member of the Torino Linux Task Force
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Mon Mar 03, 2008 7:58 am    Post subject: Reply with quote

A me sembra che tu abbia scazzato un pò baselayout, o comunque qualche file importante per far eseguire correttamente gli script di avvio.

Il problema si è verificato dopo qualche aggiornamento o operazione particolare? Se sì, dacci qualche dettaglio in più. Per casto stai utilizzando OpenRC, o sei ancora "fermo" al baselayout ufficiale?
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Mon Mar 03, 2008 11:37 am    Post subject: Reply with quote

sono fermo al baselayout originale...ho fatto qualche aggiornamento un mese fa...da allora uso poco il pc...
_________________
manang
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4654
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Mon Mar 03, 2008 1:18 pm    Post subject: Reply with quote

Code:

cloc3@wlan0 ~ $ eix baselayout |head -n3
[I] sys-apps/baselayout
     Available versions:  1.11.15-r3 1.12.10-r5 ~1.12.11 ~1.12.11.1 [M]~2.0.0_rc6-r1 {bootstrap build kernel_FreeBSD kernel_linux pam static unicode}
     Installed versions:  1.12.10-r5(01:49:52 10/01/2008)(unicode -bootstrap -build -static)

cloc3@wlan0 ~ $ qfile /lib/rcscripts/net/iproute2.sh
sys-apps/baselayout (/lib64/rcscripts/net/iproute2.sh)

prova a reinstallare il baselayout e vedi se si aggiusta solo.
non toccare i file di init.d, vanno bene così. alla peggio, reinstallali con emerge.

prova a verificare anche se sei in grado di configurare a mano il sistema con ifconfig eth0 192.168.0.13 (o altro indirizzo a caso).
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
djinnZ
Advocate
Advocate


Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.

PostPosted: Mon Mar 03, 2008 3:58 pm    Post subject: Reply with quote

cloc3 wrote:
baselayout
e sysvinit già che ti trovi.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt:wink:
mala tempora currunt...mater stultorum semper pregna est :evil:
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist :wink:
Back to top
View user's profile Send private message
manang
Apprentice
Apprentice


Joined: 09 Oct 2006
Posts: 242

PostPosted: Mon Mar 03, 2008 4:11 pm    Post subject: Reply with quote

ho risolto...
avevo installato baselayout 2 come dipendenza e con autounmask me l'aveva smasherato
era quello il problema
grazie mille
_________________
manang
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum