Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[xorg - 9800Pro] ATI 9800pro et acceleration 3D [Resolu]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
h_des_steppes
n00b
n00b


Joined: 09 Feb 2008
Posts: 9

PostPosted: Sat Feb 09, 2008 10:27 am    Post subject: [xorg - 9800Pro] ATI 9800pro et acceleration 3D [Resolu] Reply with quote

Hello,

Je cherche à faire fonctionner l'acceleration 3D sur mon ATI 9800pro. Malgré tous mes essais, rien.

J'utilise le driver fglrx :


Code:
localhost ~ # fglrxinfo
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

Error: unable to open display :0

localhost ~ # su - stba
stba@localhost ~ $ fglrxinfo
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual!

Erreur de segmentation


Mon xorg.conf :
Code:
Section "Device"

        Identifier  "ati2"
        Driver      "fglrx"
        Option      "VideoOverlay"     "on"
        Option      "OpenGLOverlay"    "off"

EndSection


Et le resultat dans Xorg.0.log :

Code:
localhost ~ # grep -e WW -e drm /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(WW) fglrx(0): Failed to open DRM connection
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *




Je suis franchement sec....

Pour info, mon repertoire /dev/dri est vide.... Je ne sais pas si c'est normal...

Pouvez-vous m'aider ?


Last edited by h_des_steppes on Mon Feb 11, 2008 6:19 pm; edited 2 times in total
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sun Feb 10, 2008 5:49 am    Post subject: Reply with quote

Peux-tu poster ton emerge --info ainsi que ton /etc/X11/xorg.conf s.v.p.
Back to top
View user's profile Send private message
bunder
Bodhisattva
Bodhisattva


Joined: 10 Apr 2004
Posts: 5871

PostPosted: Sun Feb 10, 2008 5:52 am    Post subject: Reply with quote

Moved from Desktop Environments to French.
_________________
Neddyseagoon wrote:
The problem with leaving is that you can only do it once and it reduces your influence.

banned from #gentoo since sept 2017
Back to top
View user's profile Send private message
kwenspc
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 4954

PostPosted: Sun Feb 10, 2008 10:18 am    Post subject: Reply with quote

Vas voir à ma signature :wink: c'est dédié aux soucis de configuration Ati.

Mais peut-être devrais tu essayés (aussi) le driver radeon qui inclus désormais le support des chips R300/R350
_________________
membre officieux du SAV Ati GEntoo
Back to top
View user's profile Send private message
loopx
Advocate
Advocate


Joined: 01 Apr 2005
Posts: 2787
Location: Belgium / Liège

PostPosted: Sun Feb 10, 2008 3:27 pm    Post subject: Reply with quote

essaye sans ton xorg.conf ;)


Si ca fonctionne, c'est que ca provient de ton fichier de config ....



oublie pas le eselect opengl set ati :wink:
_________________
Mon MediaWiki perso : http://pix-mania.dyndns.org
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sun Feb 10, 2008 11:15 pm    Post subject: Reply with quote

loopx wrote:
essaye sans ton xorg.conf ;)


En effet, même sans xorg.conf X est capable de détecter automatiquement presque tout le hardware, c'est vraiment fort :)
Back to top
View user's profile Send private message
loopx
Advocate
Advocate


Joined: 01 Apr 2005
Posts: 2787
Location: Belgium / Liège

PostPosted: Sun Feb 10, 2008 11:53 pm    Post subject: Reply with quote

kler ...


et ca marche aussi avec le driver libre ^^
_________________
Mon MediaWiki perso : http://pix-mania.dyndns.org
Back to top
View user's profile Send private message
davidou2a
Guru
Guru


Joined: 15 Dec 2006
Posts: 574
Location: Ajaccio

PostPosted: Mon Feb 11, 2008 8:44 am    Post subject: Reply with quote

Salut, j'ai une petite remarque a la con j'ai remarqué chez moi que si je lançais un glxgear/glxinfo en root dans un terminal bah il était impossible de se connecter au serveur X, essayes déjà l'user que tu utilises en graphique, a moins que tu sois en session graphique en root (pas biennnnnn ! :lol: )
_________________
L'enfer je connais, il s'appelle Windows...
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Mon Feb 11, 2008 8:46 am    Post subject: Reply with quote

Hmm, pourquoi je l'ai pas vu plus tôt... Peux-tu mettre ton titre du topic en conformité avec les conventions de notre forum s'il te plait ? Merci :)
Back to top
View user's profile Send private message
h_des_steppes
n00b
n00b


Joined: 09 Feb 2008
Posts: 9

PostPosted: Mon Feb 11, 2008 1:19 pm    Post subject: Reply with quote

Merci pour toutes ces infos.

Donc, voici ce que j'ai testé :

-> Verification des modules dans le noyau : ok comme decrit dans le ATI how to.
-> Verification que xorg-conf n'a pas été compilé avec dllloader : emerge --info xorg-x11 ne montre pas dllloader.
-> modprobe fglrx :
Code:
localhost ~ # modprobe fglrx
FATAL: Module fglrx not found.

Par contre, dans Xorg.0.log :
Code:
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.40.4
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.0


-> Autre test :
Code:
ln -s /usr/lib/dri /usr/lib/xorg/modules/dri
: Aucun impact
Code:
eselect set ati
: auncun impact

-> Make.conf :
J'ai découvert l'option suivante dans make.conf
Code:
VIDEO_CARDS="fglrx"

C'etait à nvidia. J'ai donc modifié puis lancé :
Code:
emerge --update --newuse --deep world

Resultat : compilation toute une nuit puis aucune difference.

-> Resultat de fglrxinfo :
Code:
localhost ~ # fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)


-> Résultat de glxinfo :
Code:
localhost ~ # LIBGL_DEBUG="verbose"
localhost ~ # glxinfo
name of display: :0.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0  screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
    GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None


-> Configuration de Xorg.conf :
Code:
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"

   Identifier     "Simple Layout"
   Screen         "Screen 1" 0 0
   InputDevice    "Mouse1" "CorePointer"
   InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

# **********************************************************************
# Files sections.
# **********************************************************************
Section "Files"

#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"
#    ModulePath "/usr/lib/modules"
   FontPath     "/usr/share/fonts/misc/"
   FontPath     "/usr/share/fonts/Type1/"
   FontPath     "/usr/share/fonts/100dpi/"
   FontPath     "/usr/share/fonts/75dpi/"
EndSection

# **********************************************************************
# Module sections.
# **********************************************************************
Section "Module"

   Load  "dbe"     # Double buffer extension
   SubSection "extmod"
      Option       "omit xfree86-dga"   # don't initialise the DGA extension
   EndSubSection
   Load  "freetype"
   #    Load        "xtt"
   Load  "glx"
   Load  "dri"
EndSection

# **********************************************************************
# InputDevice sections.
# **********************************************************************
Section "InputDevice"

#    Option     "Protocol"      "Xqueue"
#    Option   "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
#    Option "XkbModel"    "pc105"
#    Option "XkbModel"    "microsoft"
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
   Identifier  "Keyboard1"
   Driver      "kbd"
   Option       "AutoRepeat" "500 30"
   Option       "XkbRules" "xorg"
   Option       "XkbModel" "pc104"
   Option       "XkbLayout" "fr"
EndSection

Section "InputDevice"
   Identifier  "Mouse1"
   Driver      "mouse"
   Option       "Protocol" "Auto"   # Auto detect
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
   Identifier   "ati"
   HorizSync    31.5 - 64.3
   VertRefresh  50.0 - 70.0
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
   Identifier  "ati2"
#   Driver      "radeon"
   Driver      "fglrx"
   Option      "VideoOverlay"     "on"
   Option      "OpenGLOverlay"    "off"
        BusID "PCI:01:00:0"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
   Identifier "Screen 1"
   Device     "ati2"
   Monitor    "ati"
   DefaultDepth     24
   SubSection "Display"
      Viewport   0 0
      Depth     8
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

# **********************************************************************
# other sections
# **********************************************************************
Section "DRI"
   Group        0
   Mode         0666
EndSection

Section "Extensions"
        Option      "Composite" "false"
        Option      "Composite" "disable"
EndSection



-> Resulat de emerge --info :
Code:
localhost X11 # emerge --info
Portage 2.1.3.19 (default-linux/x86/2007.0/desktop, gcc-4.1.2, glibc-2.6.1-r0, 2.6.19-gentoo-r5 i686)
=================================================================
System uname: 2.6.19-gentoo-r5 i686 AMD Sempron(tm) 2600+
Timestamp of tree: Fri, 08 Feb 2008 08:00:02 +0000
app-shells/bash:     3.2_p17-r1
dev-lang/python:     2.4.4-r6
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.10-r5
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.61-r1
sys-devel/automake:  1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.24
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="fr_FR@euro"
LC_ALL="fr_FR@euro"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl acpi alsa arts berkdb bitmap-fonts cairo cdr cli cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam firefox fortran gdbm gif gnome gpm gstreamer gtk hal iconv ipv6 isdnlog jpeg kde kerberos ldap mad midi mikmod mp3 mpeg mudflap ncurses nls nptl nptlonly ogg opengl openmp oss pam pcre pdf perl png pppd python qt3 qt3support qt4 quicktime readline reflection samba sdl session spell spl ssl svg swat tcpd tiff truetype truetype-fonts type1-fonts unicode vorbis win32codecs x86 xml xorg xv zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="fglrx"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LDFLAGS, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


-> log de xorg :
Code:
localhost X11 # grep -e WW -e drm /var/log/Xorg.0.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(WW) fglrx(0): Failed to open DRM connection
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Mon Feb 11, 2008 1:28 pm    Post subject: Reply with quote

Est-tu certain que ton kernel est ok ?
Back to top
View user's profile Send private message
kwenspc
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 4954

PostPosted: Mon Feb 11, 2008 2:53 pm    Post subject: Reply with quote

loopx wrote:

oublie pas le eselect opengl set ati :wink:

_________________
membre officieux du SAV Ati GEntoo
Back to top
View user's profile Send private message
h_des_steppes
n00b
n00b


Joined: 09 Feb 2008
Posts: 9

PostPosted: Mon Feb 11, 2008 6:19 pm    Post subject: Reply with quote

Bon, je me suis pas mal aidé du lien suivant : (Merci à Kwenspc)

http://odin.prohosting.com/wedge01/gentoo-radeon-faq.html

Et je me suis concentré sur mon probleme de modprobe fglrx :

Au départ, j'avais :
Code:
localhost ~ # modprobe fglrx
FATAL: Module fglrx not found.


J'ai recompilé les ati drivers : (fglrx)
Code:
emerge ati-drivers

Il m'a ensuite donné :
Code:
localhost X11 # modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.19-gentoo-r5/video/fglrx.ko): Operation not permitted

Puis :
Code:
localhost X11 # modprobe -r radeon
localhost X11 # modprobe fglrx

Et, là, plus d'erreur.
J'ai relancé X : (ctrl+alt+bck)
Et comme par miracle :
Code:
localhost ~ # fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9800 PRO
OpenGL version string: 2.0.6747 (8.40.4)
localhost ~ # glxgears
5262 frames in 5.0 seconds = 1049.484 FPS
9248 frames in 5.0 seconds = 1849.575 FPS
10022 frames in 5.0 seconds = 2000.662 FPS
9739 frames in 5.0 seconds = 1944.090 FPS
10118 frames in 5.0 seconds = 2023.528 FPS


Et maintenant, tout marche. (meme apres un reboot).

Encore merci pour votre aide ! Sans le lien ci-dessus, je sais pas si j'aurais trouvé qu'il fallait recompiler les drivers....
Les messages d'erreurs etaient loin d'etre clairs !


Last edited by h_des_steppes on Mon Feb 11, 2008 10:04 pm; edited 1 time in total
Back to top
View user's profile Send private message
El_Goretto
Moderator
Moderator


Joined: 29 May 2004
Posts: 3098
Location: Paris

PostPosted: Mon Feb 11, 2008 6:21 pm    Post subject: Reply with quote

Et utilise une version plus à jour que fglrx 8.40 qui est une sorte de beta...
_________________
-Gentoo hardened [EoL]: µ-serv Gen8 G1610T, 8Go ECC ; NF9D-2700, 4Go
-FreeBSD 11/Vimage/Jails: DS61, i3 2100T, 16Go ; FreeNAS: µ-serv N40L, 8Go ECC
-Réseau: ERL-3 + ESL-24 + GS108Tv2
-NAS: RN312
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum