Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Général] Grosses lenteurs (Résolu, LDAP en cause)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
Possum
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jul 2003
Posts: 134
Location: Toulouse, France

PostPosted: Thu Feb 07, 2008 6:20 pm    Post subject: [Général] Grosses lenteurs (Résolu, LDAP en cause) Reply with quote

Oui, je sais, mon topic est pas très parlant.. mais bon, je vois pas trop comment le dire autrement.

Depuis ma dernière màj, y'a deux ou trois jours, ma machine donne l'impression de s'être engluée dans du goudron... Mais épais en plus...

Par exemple:
Code:
possum@haloperidol ~ $ date
jeu fév  7 19:13:18 CET 2008
possum@haloperidol ~ $ su - root
Mot de passe :
haloperidol ~ # date
jeu fév  7 19:13:45 CET 2008
haloperidol ~ #


Soit 27 secondes pour me rendre la main.

Au boot, certains services, D-Bus, named pour ne citer qu'eux, ne donnent pas l'impression de vouloir démarrer. J'ai largeemnt le tps d'aller faire un café et de revenir que la machine attend toujours un hypothétique time out. Bref, obligé de démarrer en interractif, de skipper la moitié des services et de les relancer plus tard...

Mon named, qui dessert mon réseau et qui fait du cache en plus, mets des plombes à répondre aux queries... En gros 20 secondes pour chaque query...

À part ça, elle a l'encéphalogramme d'une huitre morte:

Code:
possum@haloperidol ~ $ uptime
 19:18:01 up 1 day, 0 min,  2 users,  load average: 0.11, 0.17, 0.14
possum@haloperidol ~ $


Précision, je suis en ~x86, si qqun à déjà rencontré ce genre de soucis... Et la machine est pas une bête de course, mais pas une cagole non plus, c'est un C2D à 1,8 GHz
_________________
Marsupial Power Inside

Sauvez les arbres, mangez un castor !


Last edited by Possum on Sun Feb 10, 2008 11:04 am; edited 2 times in total
Back to top
View user's profile Send private message
kopp
Advocate
Advocate


Joined: 09 Apr 2004
Posts: 2885
Location: Grenoble, France

PostPosted: Thu Feb 07, 2008 8:59 pm    Post subject: Reply with quote

tu as mis à jour les fichiers te config avec etc-update ? tu as fait un -5 à l'arrache ?
Back to top
View user's profile Send private message
Possum
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jul 2003
Posts: 134
Location: Toulouse, France

PostPosted: Fri Feb 08, 2008 6:15 am    Post subject: Reply with quote

Que nenni !

J'ai depuis longtemps banni etc-update de mon vocabulaire pour utiliser dispatch-conf. Et j'ai pas fait le goret.... Enfin, je crois pas...
_________________
Marsupial Power Inside

Sauvez les arbres, mangez un castor !
Back to top
View user's profile Send private message
Desintegr
l33t
l33t


Joined: 25 Mar 2004
Posts: 863
Location: France - Orléans

PostPosted: Fri Feb 08, 2008 6:21 am    Post subject: Reply with quote

Mise à jour du noyau ?
Pas de processus qui mange 100% du CPU ?
Disque dur en UDMA ?
Rien d'étrange dans le dmesg ?
_________________
Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Back to top
View user's profile Send private message
Possum
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jul 2003
Posts: 134
Location: Toulouse, France

PostPosted: Fri Feb 08, 2008 6:37 am    Post subject: Reply with quote

Kernel 2.6.23. Pas de changement lors de la maj.

Code:
haloperidol ~ # uname -a
Linux haloperidol 2.6.23-gentoo-r5 #5 SMP Wed Jan 23 19:41:40 CET 2008 i686 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
haloperidol ~ #


Rien dans dmesg...
Code:
haloperidol ~ # dmesg
early_node_map[1] active PFN ranges
    0:        0 ->   524176
On node 0 totalpages: 524176
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292497 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FA9B0, 0024 (r2 ACPIAM)
ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT  11000726 MSFT       97)
ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP  11000726 MSFT       97)
ACPI: DSDT 7FF905C0, 928C (r1  A0545 A0545000        0 INTL 20060113)
ACPI: FACS 7FF9E000, 0040
ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC  11000726 MSFT       97)
ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG  11000726 MSFT       97)
ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM  11000726 MSFT       97)
ACPI: HPET 7FF99850, 0038 (r1 MSTEST OEMHPET  11000726 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a202 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 520081
Kernel command line: video=uvesafb:1280x1024-32,mtrr:4,ywrap
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0607000 soft=c0605000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1868.255 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072744k/2096704k available (3201k kernel code, 22748k reserved, 1651k data, 248k init, 1179200k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc05c4000 - 0xc0602000   ( 248 kB)
      .data : 0xc0420675 - 0xc05bd544   (1651 kB)
      .text : 0xc0100000 - 0xc0420675   (3201 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3740.30 BogoMIPS (lpj=6230888)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003140 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0608000 soft=c0606000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3737.02 BogoMIPS (lpj=6227241)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003140 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
Total of 2 processors activated (7477.33 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  CA, should be BD [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: 00:08: ioport range 0x290-0x297 has been reserved
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
pnp: match found with the PnP device '00:0c' and the driver 'system'
pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: match found with the PnP device '00:0f' and the driver 'system'
pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
pnp: match found with the PnP device '00:10' and the driver 'system'
pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:10: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: f8700000-fe7fffff
  PREFETCH window: bfe00000-dfdfffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: dfe00000-dfefffff
PCI: Bridge: 0000:00:1c.3
  IO window: b000-bfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: a000-afff
  MEM window: fe800000-fe8fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: fea00000-feafffff
  PREFETCH window: 88000000-880fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
DLM (built Jan 23 2008 18:19:58) installed
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
ppdev: user-space parallel port driver
uvesafb: NVIDIA Corporation, G84 Board - p402h00 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:b0f0
uvesafb: pmi: set display start = c00cb153, set palette = c00cb1ae
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: VBE state buffer size cannot be determined (eax=0x4f04, err=1)
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2867
Console: switching to colour frame buffer device 160x64
uvesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 14336k, total 14336k
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7FF9E0C0, 01C6 (r1    AMI   CPU1PM        1 INTL 20060113)
ACPI: SSDT 7FF9E290, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
ACPI Exception (processor_core-0821): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0821): AE_NOT_FOUND, Processor Device is not present [20070126]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'parport_pc'
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport0: Legacy device
lp0: using parport0 (interrupt-driven).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Linux video capture interface: v2.00
Loading iSCSI transport class v2.0-724.
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 cmd 0xf8830900 ctl 0x00000000 bmdma 0x00000000 irq 219
ata2: SATA max UDMA/133 cmd 0xf8830980 ctl 0x00000000 bmdma 0x00000000 irq 219
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 cmd 0xf8830b00 ctl 0x00000000 bmdma 0x00000000 irq 219
ata6: SATA max UDMA/133 cmd 0xf8830b80 ctl 0x00000000 bmdma 0x00000000 irq 219
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
ata2.00: configured for UDMA/66
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170S  1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 cmd 0xf8834100 ctl 0x00000000 bmdma 0x00000000 irq 16
ata8: SATA max UDMA/133 cmd 0xf8834180 ctl 0x00000000 bmdma 0x00000000 irq 16
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.1 to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 18
ata10: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 18
ata9.00: ATA-7: SAMSUNG HD400LD, WQ100-14, max UDMA/100
ata9.00: 781422768 sectors, multi 0: LBA48
ata9.01: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
ata9.01: 586114704 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata9.01: configured for UDMA/100
scsi 8:0:0:0: Direct-Access     ATA      SAMSUNG HD400LD  WQ10 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
sd 8:0:0:0: Attached scsi generic sg2 type 0
scsi 8:0:1:0: Direct-Access     ATA      Maxtor 6L300R0   BAJ4 PQ: 0 ANSI: 5
sd 8:0:1:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
sd 8:0:1:0: [sdc] Write Protect is off
sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:1:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
sd 8:0:1:0: [sdc] Write Protect is off
sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 8:0:1:0: [sdc] Attached SCSI disk
sd 8:0:1:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfebff400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000dc00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0d' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0e' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usbcore: registered new interface driver iforce
input: PC Speaker as /devices/platform/pcspkr/input/input3
input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
EDAC MC: Ver: 2.1.0 Jan 23 2008
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
SCTP: Hash tables configured (established 65536 bind 65536)
Starting balanced_irq
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 248k freed
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xf883a000, 00:1a:92:50:2c:33, XID 38000000 IRQ 17
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 21
eth1: RTL8110s at 0xf883cc00, 00:13:46:2d:72:85, XID 04000000 IRQ 21
PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
EXT3 FS on sda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
r8169: eth0: link up
r8169: eth0: link up
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
w83627ehf: Found W83627DHG chip at 0x290
coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
r8169: eth1: link up


Disques utilisant la libata... 1 en SATA deux en PATA:
Code:

/dev/sda:
 Timing cached reads:   2690 MB in  2.00 seconds = 1344.78 MB/sec
 Timing buffered disk reads:  218 MB in  3.02 seconds =  72.09 MB/sec
haloperidol ~ # hdparm -tT /dev/sdb

/dev/sdb:
 Timing cached reads:   2602 MB in  2.00 seconds = 1301.51 MB/sec
 Timing buffered disk reads:  222 MB in  3.02 seconds =  73.43 MB/sec
haloperidol ~ # hdparm -tT /dev/sdc

/dev/sdc:
 Timing cached reads:   2670 MB in  2.00 seconds = 1334.98 MB/sec
 Timing buffered disk reads:  184 MB in  3.02 seconds =  60.94 MB/sec
haloperidol ~ #


Aucun process à 100%... Rien...

Code:
haloperidol ~ # top
top - 07:31:00 up 1 day, 12:13,  2 users,  load average: 0.14, 0.10, 0.03
Tasks: 197 total,   1 running, 196 sleeping,   0 stopped,   0 zombie
Cpu0  :  2.3%us,  1.0%sy,  0.0%ni, 96.7%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu1  :  3.1%us,  0.3%sy,  0.0%ni, 96.6%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   2073812k total,  1563884k used,   509928k free,   412256k buffers
Swap:        0k total,        0k used,        0k free,   471532k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 8512 possum    20   0  233m 101m  32m S    6  5.0   8:10.16 seamonkey-bin
 6981 root      20   0  937m 127m 7548 S    2  6.3  53:21.49 X
 7762 possum    20   0  141m  47m  27m S    1  2.3  22:18.08 amarokapp
 7726 possum    20   0 36100  16m  12m S    1  0.8   1:57.61 kicker
 1985 root      20   0  2240 1120  800 R    0  0.1   0:00.04 top
 6523 root      20   0  8336 4048 2356 S    0  0.2   0:17.10 snmpd
    1 root      20   0  1620  552  480 S    0  0.0   0:01.67 init
    2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd
    3 root      RT  -5     0    0    0 S    0  0.0   0:00.04 migration/0
    4 root      15  -5     0    0    0 S    0  0.0   0:06.41 ksoftirqd/0
    5 root      RT  -5     0    0    0 S    0  0.0   0:00.01 watchdog/0
    6 root      RT  -5     0    0    0 S    0  0.0   0:00.04 migration/1
    7 root      15  -5     0    0    0 S    0  0.0   0:21.42 ksoftirqd/1
    8 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/1
    9 root      15  -5     0    0    0 S    0  0.0   0:00.80 events/0
   10 root      15  -5     0    0    0 S    0  0.0   0:00.35 events/1
   11 root      15  -5     0    0    0 S    0  0.0   0:00.00 khelper
   70 root      15  -5     0    0    0 S    0  0.0   0:02.04 kblockd/0
   71 root      15  -5     0    0    0 S    0  0.0   0:00.25 kblockd/1
   75 root      15  -5     0    0    0 S    0  0.0   0:00.00 kacpid
   76 root      15  -5     0    0    0 S    0  0.0   0:00.00 kacpi_notify
  211 root      15  -5     0    0    0 S    0  0.0   0:00.00 cqueue/0
  212 root      15  -5     0    0    0 S    0  0.0   0:00.00 cqueue/1
  216 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata/0
  217 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata/1
  218 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata_aux
  221 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksuspend_usbd
  226 root      15  -5     0    0    0 S    0  0.0   0:00.00 khubd
  229 root      15  -5     0    0    0 S    0  0.0   0:00.00 kseriod
  261 root      15  -5     0    0    0 S    0  0.0   0:09.42 kswapd0
  262 root      15  -5     0    0    0 S    0  0.0   0:00.00 aio/0
  263 root      15  -5     0    0    0 S    0  0.0   0:00.00 aio/1
  267 root      15  -5     0    0    0 S    0  0.0   0:00.00 cifsoplockd
  268 root      15  -5     0    0    0 S    0  0.0   0:00.00 cifsdnotifyd
  366 root      20   0   752  304  260 S    0  0.0   0:11.47 v86d
  463 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_0
  465 root      15  -5     0    0    0 S    0  0.0   0:00.26 scsi_eh_1
  467 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_2
  469 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_3
  471 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_4
  473 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_5
  494 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_6
  496 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_7
  500 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_8
  502 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_9
  536 postfix   20   0  8380 2344 1720 S    0  0.1   0:00.00 pickup
  572 root      15  -5     0    0    0 S    0  0.0   0:00.00 kpsmoused
haloperidol ~ #


Bref, la machine ne fout rien... Et en plus, visiblement, je l'emmerde quand je lui demande de faire qqch....
_________________
Marsupial Power Inside

Sauvez les arbres, mangez un castor !
Back to top
View user's profile Send private message
X-Guardian
Tux's lil' helper
Tux's lil' helper


Joined: 25 Jan 2005
Posts: 133
Location: Templeuve, Nord de la France

PostPosted: Fri Feb 08, 2008 8:37 am    Post subject: Reply with quote

Salut,

Totalement rien à voir, ou presque :

Tu n'aurais pas demandé une authentification par annuaire ? (LDAP ou AD ?)

J'utilise LDAP au boulot pour identifier les utilisateurs.
J'avais omis certaines lignes qui faisait que si DBUS n'arrivait pas à trouver le serveur LDAP (DBUS ou nss), tout le système était très lent. (Les deux compères cherchaient comme des malades le serveur LDAP et envoyaient des requêtes sans cesse)



Tu n'as pas de partitions pleines ?
Pas de messages d'erreurs dans /var/log/messages (ou autres ?)

Coupe le maximum de services réseaux/systèmes, et essayes de les relancer un à un, voir si l'un d'entre eux ne s'amuseraient pas à enquiquiner les autres.

@+,
Guile.
Back to top
View user's profile Send private message
Possum
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jul 2003
Posts: 134
Location: Toulouse, France

PostPosted: Fri Feb 08, 2008 8:45 am    Post subject: Reply with quote

Raaaaah LDAP, bon sang mais cest bien sûr !

Ouais, j'ai installé et configuré un openLDAP pour tester openfiler qui demande obligatoirement un annuaire... !!!

Bon, je crois que je vais chercher de ce côté là :)

Mais tout à l'heure, chuis au taff là ;)

Merci !
_________________
Marsupial Power Inside

Sauvez les arbres, mangez un castor !
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Fri Feb 08, 2008 8:47 am    Post subject: Reply with quote

ldap.conf:
bind_policy soft

pour couper court aux temps d'attente pour le ldap ;) Il ne tente qu'une fois, et abandonne si ça marche pas. Bien sur c'est à faire seulement si c'est en local, parce que si le ldap est en réseau, ça craint un peu.
Back to top
View user's profile Send private message
Possum
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jul 2003
Posts: 134
Location: Toulouse, France

PostPosted: Fri Feb 08, 2008 6:31 pm    Post subject: Reply with quote

Bon, je viens de rentrer et de rajouter un -ldap dans mes USE.

Je vous dirais si ça va mieux après un emerge -DN world :) D'autant plus que Openfiler ne correspondant pas a mes attentes, je vais plutôt me mittonner une gentoo à ma sauce pour faire serveur de fichier et iSCSI :) Donc openldap, zou, au trou :p

@geekounet: Merci du tuyau, mais tu vois, je suis encore plus radical. J'ai déjà suffisament d'emmerdes au boulot avec LDAP pour vouloir éviter de m'en coltiner à la maison :)

[OFF]En passant, puisqu'on est dans LDAP, si qqun a réussi à installer le "Identity Synchronization for Windows" pour "Sun Java System Directory Server Enterprise Edition" dans un LDOM sparc sur un T2000 ou un T52XX qu'il se dénonce que je puisse lui sucer le cerveau et enfin y arriver !"[/OFF]

[OFF]C'est mon 100ème post ! Bière pour tout le monde ![/OFF]

[EDIT:] C'est bien LDAP qui me fout la merde:
Code:
Feb  8 19:33:27 [su] pam_ldap: ldap_simple_bind Can't contact LDAP server
Feb  8 19:33:27 [su] pam_ldap: reconnecting to LDAP server...
Feb  8 19:33:37 [su] pam_ldap: ldap_simple_bind Can't contact LDAP server
Feb  8 19:33:37 [su] Successful su for root by possum


Bref, j'aurais pas du suivre le tuto de gentoo-wiki....

EDIT: Après recompil, c'était bien mon serveur LDAP qui était mal configuré. Merci à tous.
_________________
Marsupial Power Inside

Sauvez les arbres, mangez un castor !
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum